Replication of sdata form r/3 to crm

can any one help me in how data is replicated from r/3 to crm and what are the advances and additions in crm 5.0
thanks and regards
rajesh
if anybody could provide me with doccuments
[email protected]

Hello Rajesh,
all this information should be found in avaliable documentation. So you should not ask to get it send by mail. Please have a look at:
<a href="http://help.sap.com/bp_crmv150/CRM_DE/html/C63_EN_DE.htm">Best Practice Guide</a>
Here you find the Documents:
- B01: CRM Generation
- C71: CRM Connectivity
- B09: CRM Customizing Replication
- C03: CRM Master and Transaction Data Replication
and also go to <a href="https://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000429833&">Release Notes SAP CRM 5.0</a>.
Regards
Gregor

Similar Messages

Delta is not working for custom appended fields (ZAKNA1) form R/3 to CRM

Hi, This question pertains to Customer Master (KNA1) replication from R/3 4.7 to CRM 5.0 system via middleware.
Standard fields are working fine. The custom fields also replicate fine during initial load and request loads however, delta is does not seem to be working. Any ideas or suggestions highly appreciated...Thank you.
Best regards,
---Manohar

Hello,
it's a long way since you post this question. I'm facing a similar problem. When i enter XD02 and change only something in the classification system, the trigger for CRM update doesn't happen. Only if i change also a master field...
I needed the force the trigger so he can update correctly when the system is only changed in the classification system.
At the time (3 years ago...:)) did you remember if you found a workaround for your problem??
Thanks,
Best regards,

Replication of customers from R/3 to CRM

Hi everybody,
After completion of Initial Download of data from R/3 to CRM ,the customers replicate crm.
But my doubt is once we do initial download then the customers which are in R/3 in bulk are replicated to R/3.But there are few customers which are still replicated from R/3 daily.
So I want to know the reason for this replication even though after the initial download is completed.
please help me.
regards

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Industry error while doing replication of customer from R/3 to CRM

Hi,
We have production system already implemented and going for roll out for another company both R/3 & CRM.
We have generated conditional objects while doing roll out phase. From then we are getting this error.
Problem:
Customers are not getting replicated to CRM. And in SMW01 the error log says
"Industry 300 not defined for industry system SAPS
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
Since we are going for roll out we have done initial load of all conditional objects
like 'DNL_COND_A002' etc.
After running we did checked in R3AM1 - everything was DONE - in green colour.
But in SLG1 - Display log - there are several entries in Red colour.
Message text says -
"It is not possible to change client-independent Customizing objects
Diagnosis:
Change of client-independent Customizing objects is not permitted in the client in which the transfer of data for table T682 is executed.
System response:
As table T682 contains client-independent Customizing, data transfer is interrupted.
Procedure for System Administration
Provide users with the appropriate authorization to execute data transfer in a client in which changes to client-independent objects is permitted."
Now queues are pilled up with the industry error and don't know how to correct these errors.
Please help.
Regards,
Dhanraj Dange

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Replication of data from r\3 to crm and difference between crm 4.0 & 5.0

can any one help me in how data like bp. transactions and conditions data replicated from r/3 to crm and if u can provide me with some doccuments
thanks and regards
rajesh
[email protected]

Hello Rajesh,
as I said in the other Post you should not ask to documentation send by mail. Please have a look at:
<a href="https://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000429833&">Release Notes SAP CRM 5.0</a>.
Regards
Gregor

Replication of Equipment from R/3 to CRM

Hi Experts
I am writing because i have a problem in the replication of the equipment from R/3 to CRM.
I can replicate the equipment well, but some information is missing in the transfering. Example:
In R/3. Tx. IE03, The tab SerData have the Customer Number.
I need to transfer that number to CRM.
In CRM. Tx. IB53, i can see my equipment replicated, but there is no information about the customer number.
Please help on this issue
Points rewarded
Thanks

Kindly check the partner function whether that partner function of customer in ECC, is defined in CRM. If it is not defined then it will not copy to IBase while data transfer.
Reward points if helpful.

Replication of custom-fields in BP from CRM to ECC

Hello all,
I have created additonal attributes for a Business Partner in CRM7.0 (ZZKATR1 and ZZKATR2) using the tool AET.
In ECC I've added these attributes to tabel KNA1 using an append structure.
The replication of the BP from CRM to ECC is already working fine.
So when I change a standard field this is replicated succesfully.
Only now I want to enhance this replication with these additional attributes (custom-fields ZZKATR1 and ZZKATR2).
So they also appear in ECC in table KNA1.
Can anyone tell me how this is done? And what steps I have to take?
Thanks a lot.
Marco

Hello Marco,
Please see note 736595 and also the links below explaining the scenarios.
http://wiki.sdn.sap.com/wiki/display/CRM/EnhancingtheCRMMiddlewareExample2
/people/vikash.krishna/blog/2009/07/21/exchange-ecc-customer-master-standard-field-with-the-crm-z-fields-ecc--crm
I hope this helps.
Kind regards,
Vanessa

Replication of BP and Sales order from CRM to R/3

Hello everyone,
I have a peculiar condition in my hands.The requirement is to replicate 10 business partners from crm to R/3 ,then the next 4 Business partners need not be replicated and then the next three replicated..How do we do this kind of replication....
One thing more regarding the replication of sales order.When we save a sales order in CRM,is it automatically replicated to R/3 or do we need to release it manually??
If yes,then if we do not want to replicate the sales order from crm to R/3,then what will we do?
Consider that all the middleware settings are configured and working fine..
Puneet

Hi Bokhal,
Please consider my answer from your recent thread dealing with apparently the same issue :
Hi Bhokal,
For filters in uploads please consider below:
For Filtering the BP-upload, use the Administration Console
(tx. SMOEAC) in the corresponding subscription of the "All Business
Partners (MESG)" publication assigned to the R/3 site.
Some publications (and the replication objects they are based on) are
delivered as type "Simple bulk" which does not give you the opportunity
to assign criteria values for filtering.
You might have to re-create the publication. To do that:
1) First delete the subscriptions "All Business Partners (MESG)" and its
publications & the replication object.
2) Recreate the replication object as type "Simple intelligent".
3) Afterwards you can create a new publication via wizard of type
"Simple intelligent (msg)" assigned to the BDOC-Type BUPA_MAIN. Then,
you will be able to select some "filter criteria".
The reason for deleting the "old" publication is, that you
are not allowed to assign a BDOC-Type to more than one publication.
4) But please keep in mind that there is no realignment supported. So
you should only use fields for filtering, which cannot be changed
afterwards.
This is the "simple" solution for filtering on fields. This
will not provide complex filter criteria.
If you need this, you shall create a filter function in R/3- and/or
CRM-Inbound and -outbound.
If you want to keep the control about the upload trigger, you can add an
additional module in transaction CRMC_BUT_CALL_FU, position > 200000.
BUPA_MWX_BDOC_BPS_FILL_CENTRAL. Within this new module, you can delete
all partners within the complex structure that you don't want to upload.
Hoping that above will be helpful.
Best regards
Christophe Sturzel

Replication of Pricing Conditions between ECC and CRM

Hi All
I have a couple of queries regarding replication of pricing information between ECC_CRM. We maintain the filter settings for Pricing procedures, access sequences and condition types in the object DNL_CUST_CND_PR, and accordingly these are replicated from ECC to CRM. My Questions:
1. If some pricing procedure is created in CRM and this needs to be replicated to ECC, Can we achieve this?
2. Would DELTA be active on these objects, in the sense if some changes are made to a pricing procedure in ECC, would they flow automatically to CRM?
Thanks in advance
Best Regards,
Ram Sushanth

Hi Chandra and Swaroop
Thanks a lot for your response.
From your replies, now, this is my understanding (Pl correct me if am wrong)
1. Replication of Pricing Procedure from CRM to ECC is possible.
It would be of great help if you could elaborate on the procedure to do so or provide pointers for documentation in this regard.
Because, for replication from ECC to CRM, we perform an initial load on the object DNL_CND_CUST_PR or DNL_CUST_CNDALL.What is the object that we need to execute from replication from CRM to ECC?
2. DELTA would be active only on condition records, but not on Condition types and Pricing Procedures and if any pricing procedure is changed in ECC, we would need to perform Initial Load again.
Thanks in advance
Best Regards
Ram Sushanth

Replication of Custom Include IS-U to CRM

Hello gents!
CRM 4.0 WebClient, IS-U 4.72.
Currently custom fields where added to the technical objects in ISU.
I am currently facing the following problem. A custom include was added into the IFLOT table (Functional Location) in IS-U.
It appears on the EHAU structure for the Connection object in ISU but is not replicating to CRM.
Now I need to search the Premise(PoD) based on that custom include.
The first problem I face is replication. This fields are not being replicated into CRM.
The BDOCS in question are: SI_CONNOBJ and SI_POD.
It seems that the connection object from ISU is replicated as a material of some kind in CRM. There is a SET attribute ISU_CONNOBJ but the custom field is not anywhere.
I have found some badi's to transport custom fields:
IBSSI_SEND_TO_UPL (CRM)
This BAdI adds customer-specific data to the BDoc for technical objects before the upload.
IBSSI_RECEIVE_TO_UPL (IS-U)
This BAdI reads customer-specific data from the BDoc for technical objects after the upload.
The data is transferred to the master data generator.
IBSSI_SEND_TO_UPL (IS-U)
This BAdI adds customer-specific data to the to the BDoc for technical objects before the
download.
IBSSI_RECEIVE_TO_UPL (IS-U)
This BAdI reads customer-specific data from the BDoc for technical objects after the download.
I as well thought about making a RFC to select the values I am interested on and then use that to populated the info in the view. However i am not sure if it would be appropiate.
Any ideas!?
Thank you,
Best regards.
A

Hi Oguz,
please check the following threads:
Variant material replication in CRM
Download ERP 6.0 configurable products (Material variants) into CRM 7.0
Hope this helps to answer your questions.
Best Regards,
Michael

Replication of Business Partner from ISU to CRM

Hello,
I am creating the Business partner through 'BP' transaction and it is getting replicating to CRM,
But when I am creating the Buiness Partner through 'Emigall' transaction it is not replicating to CRM.
Also I added the many fields like u2018TIME_ZONE, ADDR_DATE_TO, ADDR_DATE_FROM, TEL_CNTRY, FAX_CNTRY etc.u2019 in the structure of business partner in 'Emigallu2019 transaction,
and the business partners were created successfully in ISU, but it is still *not replicating in CRM*.
Please help me to solve this issue.
Regards,
Darshana

Hi Darshana,
1st step: Check SAP delivery: IS Migration -> Settings -> SAP Settings
CRM_REPL_OFF X X Deactivate CRM Replication (only IS-U)
2nd step: Check project settings (superseding standard setting): IS Migration -> Settings -> Customizing Settings
- if you can't find the parameter CRM_REPL_OFF: standard setting is valid
- if there is a parameter CRM_REPL_OFF: check whether what the parameter value is (space or X)
Kind regards,
Fritz

How to map the form fields with zoho crm module?

I am integrating a web app with Zoho CRM,I created a form in .aspx and put some fields on it like first name,last name,email etc.Now i want to map these fields with the zoho crm contacts module,so that when i submit this form it will save the data there.
Sumit Bhargav

Hi Sumit,
ZOHO CRM is third party software, it’s out of our support range. I recommend you have a look at ZOHO Developer API from
http://www.zoho.com/crm/help/api/. If you have any questions about it, you can open thread on their forum for support.
https://forums.zoho.com/.
Thank you for understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Faxing adobe pdf forms using actions in CRM service process

Hi experts,
Does anybody has experience in sending adobe PDF forms as a fax using actions in CRM service processes? Currently I use this by implementing a PPF BAdI, but what else configuration, software and hardware requirements I need to make faxing work in CRM?
Is it possible to use 3rd party software to send the fax for example winfax and transfer the fax number to this?
Regards:
Gabor

Dear Dezso,
As far as I remember, we already know each other
Our company have been using winfax in the past for sending fax messages. Now that they will use SAP-CRM shall they buy a new fax server? I have looked after Topcall, it might be useful with RFC?
In CRM service order, I use the EXEC_METHODCALL_PPF BAdI implementation to collect the data from the service order, and then use the standard function modules to "print" or "fax" the PDF document (call function FM_NAME).
At this function module, which structure do I neet to enter the recipient's fax number (I read somewhere that I have to use DEVICE='TELEFAX' in the output_options - is it true?) ?
Or should I communicate from the BAdI with Business Communication Services (create recipient and similar methods)?
Is there any way to send the fax from the local machine where the user uses the SAP GUI?
Thank you very much in advance for your help and support!
Gabor

Replication of Material Changes from ECC to CRM

Hi All,
I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
Please can any one help me.

Hi
Do you get any sysfail in the inboud queue (and / or a dump in st22)?
Do you get any errored bodcs?
If yes which error message ID and Number?
Best regards
Christophe

How to Configure ReturnAuthorizationNotification Form in Action Profile(CRM

Hi All,
I am trying to assign Return Authorization Notification (ZForm) in the CRM Transaction through Action Profile. It is asking for "Object Type Name", "Context Class" 'Processing Class" and "Processing Method" parameters. Can any one explain these parameters?
Any steps by step process for assigning Return Authorization Notification Form in CRM through Action Profile in SPRO .
Thanks for answering this question.
Regards,
Dinesh

Hi Dinesh,
For sending Notification (ZForm) in the CRM Transaction through Action Profile follow below steps, i dont know for which transaction u want to create action (i.e. Lead, Activity, Sales Order)
1) In Action Profile for Lead
    Category of Object Type : Business Object Repository
    Object Type Name : BUS2000108 (this is for Lead)
    Date Profile : u r Date profle of transaction
    Used Common Profile : Blank
    Context Class : CL_DOC_CONTEXT_CRM_ORDER
2) Action Definition (Action Setting)
   Processing Time : Processing when saving document
   Processing Times Not Permitted : No Restrictions
   Sort Order For Display : 1
   Schedule Automatically : X
   Delete After Processing :
   Changeable in Dialog : X
   Executable in Dialog : X
   Display in Toolbox :   X
Partner Function : (Assign u r Partner function for which u want to send Notification mail)
Determination Technology : Determination Using Conditions that Can Be T
Rule Type : Workflow Conditions
Action Merging : Max. 1 Action for Each Action Definition
3) Processing Types
    Process Type : Smart Forms Mail
    Mail Settings : Form Name : Assign u r Zsmart form
    Processing Class: CL_DOC_PROCESSING_CRM_ORDER
    Processing Method : CRM_ORDER_EXEC_SMART_FORM
    Archive Mode : 1 Mail only
4) In Action Condition set Start and schedule condition for u r action definition
Regards,
DD's

Replication of sdata form r/3 to crm

Similar Messages

Maybe you are looking for