Replication of storage loaction issue from crm to ecc

HI Experts ,
I am facing issue while store location replication from CRM to ECC.
I have create field "Hub Location" using AET on web ui and behind that store location search field is working .
I have already created a Order . I have copied that order .Add store location .
When i save Now all process executed and BDOC execute successfully with no error .
I have enhanced BADI data exchange and add code in method crm_dataexchange_after_fill method and added store location .
Issue : Now when i go-to to crmd_order transaction and checked that order then i am getting error that Store location plant is not defined .
Please help .
Regards ,
Rishi

Hi Rashi,
Sorry for the late reply.
Goto ECC system and find the FM "BAPI_SALESDOCU_PROXY_UPLOAD" and set the break point using your RFC user id (RFC user id from CRM to ECC and RFC user id should have the debug rights).
Once you create the order in CRM and it will come to debug in ECC.
Check TI_EXTENSION_IN tables whether your values are coming in.
If not your CRM Middleware BADI coding was not done correctly.
Hope this would help you.
Regards,
Bala

Similar Messages

Wrong replication of partner "last name" from CRM to ECC.

Hi everyone,
In the specific environment of our company, we create business partners in CRM using t-code 'BP' they are then instantly replicated to ECC (we visualize them using t-code 'XD03').
When we create a partner as a person, the fields 'first name' and 'last name' (which are 2 distinct zones ) are concatenated into one single zone when replicated into ECC. I have visualized BDOCS using t-code SMW01, and haven't seen anything abnormal.
I have been trying to debug the replication process, without any success.
Please any clues on what I should do to get the problem solved would be very much appreciated.
Many thanks
C.K.

Hi Rashi,
Sorry for the late reply.
Goto ECC system and find the FM "BAPI_SALESDOCU_PROXY_UPLOAD" and set the break point using your RFC user id (RFC user id from CRM to ECC and RFC user id should have the debug rights).
Once you create the order in CRM and it will come to debug in ECC.
Check TI_EXTENSION_IN tables whether your values are coming in.
If not your CRM Middleware BADI coding was not done correctly.
Hope this would help you.
Regards,
Bala

Replication Of Z Partner Functions from CRM to ECC

HI All,
We are creating the " Z Partner Functions " in SAP CRM & ECC.in our scenario partner functions flows from CRM to ECC and we want to replicate these partner functions from CRM to ECC.
So can some onle please tell me how to do this?.
Thanks in Advance,
Arun

1. Create the partner function in ECC
2. Assign the partner function to the relevant partner procedure in ECC
3. Create a partner function in CRM
4. Map the partner function as follows:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from R/3 into CRM
Create the following entry:
Partner function in R/3 Function
and also the below:
Create a mapping entry for data transfer from CRM to R/3 via the
following IMG activity in CRM:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from CRM into R/3
Create the following entry:
Function R/3 function Type in R/3

Replication of custom z fields from CRM to ECC

Hello,
I have created custom fields in CRM - Order using EEWB. Similarly I have created custom fields in ECC - VBAK. I want to replicate these custom fields from CRM to ECC. Somebody had suggested to use CRM_DATAEXCHG_BADI and method - CRM_DATAEXCHG_AFTER_BAPI_FILL. Can anybody give me a sample code of how to populate table - CT_BAPIPAREX within this method?
Process followed was -
1. ECC - Extend VBAK with zfld1
2. ECC - Extend BAPE_VBAK, BAPE_VBAKX with zfld1
3. CRM - Add zdoc1 using EEWB
4. CRM - Extend BAPE_VBAK, BAPE_VBAKX with zfld1 (same as ECC?)
5. CRM - CRM_DATAEXCHG_BADI and method - CRM_DATAEXCHG_AFTER_BAPI_FILL. - This is where I need to map zdoc1 of CRM to zfld1 of ECC. And then populate CT_BAPIIPAREX. This is where I am stuck.
Thanks!

HI,
If you have added field in EEWB chosen R/3 Adapter, then it will also enhance the Exchange structures and thus i guess CRM_DATAXCHange_badi shud contain in one of its changing parameters
The following blogs gives a good idea in the similar lines.
/people/vikash.krishna/blog/2009/07/21/exchange-ecc-customer-master-standard-field-with-the-crm-z-fields-ecc--crm
/people/vikash.krishna/blog/2009/07/14/crm-70-how-to--4-adding-custom-fields-with-the-new-application-enhancement-tool-aet
Revert if you need further help.
-Satish

Replication of quotation and order from CRM to ECC

Hi experts,
We are trying to replicate a quotation and order created in CRM to ECC. We have maintained the same transaction types and item categories in both ECC and CRM. Is there anything else that is required to be done for proper replication??
Now while trying to replicate, we are getting this error: "Partners from account group 0005 are not permitted for partner function BP (Notification E VPD 000)"
How to solve this??
Please Guide.
Regards
Aakshi Suri

We maintained Partners from account group 0005 for partner function BP. Now we are again getting these errors:
u2022     Account Assigment Object Successfully Assigned to Item 0000000010 (Notification S C( 312)
u2022     SALES_HEADER_IN has been processed successfully (Notification S V4 233)
u2022     The sales document is not yet complete: Edit data (Notification W V1 555)
u2022     Sales document 0005000080 was not changed (Notification E V4 219)
u2022     Status "Obsolete status" of material 101123900 does not allow external procurement (Notification E ME 053)
u2022     Error in SALES_ITEM_IN 000010 (Notification E V4 248)
Is there any place where we can check the notifications??
Kindly help us in resolving this error.
Regards
Aakshi

Restrict Contact Person replication from CRM to ECC based on Partner Funct

Hi Experts
We are replicating Contacts from CRM to ECC, by assigning them to Accounts. We have a scenario to restrict Contact Person replication to ECC only for specific Partner functions (we have 5 such partner functions), for remaining partner functions the contact Persons should not be replicated to ECC.
By Partner function I mean, while making this assignment of Contact to an Account in u201Ccontact Person Relationships datau201D under u201CPartner Function Assignment blocku201D (in web UI) we are adding a Partner function E.g. Author, (same can be seen in GUI, under Usage tab of CP Relationship data).
However we were able to replicate contacts assigned to accounts to ECC in our 5 partner functions, but even the unwanted contacts assigned to other partner functions in CRM are also getting replicated
How can I restrict CP replication from CRM to ECC based on Partner Functions assigned to the Contact Person
Your help is highly appriciated.
Points guaranteed.
Regards

Issue resolved using CRMC_BUT_CALL_FU.
Posing the table name, just in case it might help others.
Thanks

How can I Force/relaunch BP replication from CRM to ECC

Hi everybody,
We had some replication problem with sold-to-party BPs when creating them in CRM (Tr Code BP). The CRM002 id was not implemented in most cases. A job was planned to relaunch the Bdocs automatically every hour. It seemed to be ok for a moment.
However we still have some sold-to-party BPs that are not replicated at all in ECC (Master Data and sales data). The usual procedure we set to trigger the replication is checking a case in BP Tr. but when I uncheck the case and check it again, the replication doesnt happen.
Is there a way to force manually the replication of a sold to party BP from CRM to ECC?
Second question in replication subject : We also have partial replication in ECC. For example the Tax classification partially replicates. It's like if the replication process in crashing on the way and the result is no CRM002 id back in the BP master data in CRM. Do you have any idea of where it's coming from?
Is there a Transaction like SMW01 (CRM) in ECC in order to trace replication problems of processes?
Many Thanks.
Laurent

Hi,
Firstly , please check if you have any filters in for adapter object customer_main in trx. R3AC1 (which prevants data replication)
Next, check if your inbound (SMQR) or outbound queues (SMQS) of CRM are de-registered.
You can use trnx.
CRMM_BUPA_SEND
to manually replication a BP to the ECC system.
No.. there is no monitor in ECC like the Bdoc monitor (SMW01) in CRM.
Hope this helps. Reward if helpful!
Thanks,
Sudipta.

Replication of custom-fields in BP from CRM to ECC

Hello all,
I have created additonal attributes for a Business Partner in CRM7.0 (ZZKATR1 and ZZKATR2) using the tool AET.
In ECC I've added these attributes to tabel KNA1 using an append structure.
The replication of the BP from CRM to ECC is already working fine.
So when I change a standard field this is replicated succesfully.
Only now I want to enhance this replication with these additional attributes (custom-fields ZZKATR1 and ZZKATR2).
So they also appear in ECC in table KNA1.
Can anyone tell me how this is done? And what steps I have to take?
Thanks a lot.
Marco

Hello Marco,
Please see note 736595 and also the links below explaining the scenarios.
http://wiki.sdn.sap.com/wiki/display/CRM/EnhancingtheCRMMiddlewareExample2
/people/vikash.krishna/blog/2009/07/21/exchange-ecc-customer-master-standard-field-with-the-crm-z-fields-ecc--crm
I hope this helps.
Kind regards,
Vanessa

Replication from CRM to ECC and vice versa

Hi,
I am a newbie and would really appreciate any of your advice and help. I was given a task to replicate business partner from CRM to ECC. I was advised to go through a building block in SAP Best practices for CRM called C03:CRM Master and Data Replication. I've read through the materials and found out that there are some prerequisites. Do I need to installed all of the prerequisites before I can proceed with the steps given in the building block. I hope anyone could reply to me as soon as possible.
Regards,
Julianna

Hi,
Thats right! C03 best practices would be certainly helpful to you.
Few important steps for BP repllication from CRM to ECC would be
In CRM , First define your Logical destination in BD54 .
1) SU01 Transaction to create users : create user in CRM & R/3
2) Transaction code SM59 : Create RFC DESTINATION .. here u use the users created for reaching into R/3 from CRM
3) transaction code: SMOEAC: ADMINISTRATION CONSOLE:-
here define Publication, subscription and site ( OLTP) , and define replication objects ( like BUPA_MAIN, BUPA_REL)
4) define Queue: SMQR and SMQS - inbound and outbound queue /
Que registration .
5) check entry in R/3 side tables:- Make the proper entry into R/3 side tables in SM30
a)CRMRFCPAR
b)CRMPAROLTP
c)CRMSUBTAB
d) CRMCONSUM
These are important steps for Middleware settings between CRM & R/3
In addition to this , you need to correctly define your
1) in CRM ,BP GROUPINGS with Internal Number range
2) in R/3 define "Account Group" with "External Number Range" for BUSINESS PARTNER
3) In R/3 , Mapping of CRM CLASSIFICATION with R/3 account group...e.g. Classification B for customer with ACCOUNT group of R/3
You need to also map in CRM correctly the partner functions and R/3 Partner functions.
regards,
PD
Reward points if it helps...

Replication of BP from CRM to ECC

Hi,
Can some one tell me the procedure to replicate BP master data from CRM to ECC.
Regards,
SAP CRM MW.
Message was edited by:
SAP CRM

Hello Friends,
Can you help me to resolve my WEB CATALOG Image issue in the following weblog.
WEBCATALOG not working in CRM
Your help in this regard shell be highly appriciated.
Jaswant

Replication of Business partner from CRM to ECC.

Hi experts,
We are working on CRM 5.0 with backend ECC 6.0.
We are facing a problem while replicating BPs from CRM to ECC. Eventhough we are maintaining language code in CRM, the same thing is not replicating to ECC.
Can anybody help us how to solve this problem.
Thanks in advance.
Regards,
Madhu.

we have this issue on CRM006 consumers created as an org.
SAP gave us function module
'BUPA_OUTBOUND_BPS_FILL_CENTRAL' to fill the langauge in CRM 5.0 or BUPA_GENERAL_UPDATE .
We have not implemented either yet. in r/3 46C we have a small core mode in LVV02F3H to force EN as language.

BP not getting replicated from CRM to ECC server

I am currently facing an issue, it seems like the replication of BP from CRM to ECC is not working, I have created a few business partners in CRM for which the BDOC got processed completely but when I go and check these on the ECC side, I am not able to find these BP. Can any one suggest what might be happening.

Thanks a ton for the note number Denis, I am looking into this and would certainly revert back to you if this works. Just to explain you the excat problem that Im facing as of now.
I have a few Business partners which we are not able to replicate from CRM to ECC, I have tried to debug the queue and find out what the reason might be, i could see that everything got processed successfully at the CRM side, the issue is when the BDOC reaches ECC, there it gives me a error that "NO UNIQUE JURISDICTION CODE CANNOT BE DETERMINED" area as "TAX_TXJCD".
If you can suggest anything new based on this information please let me know, in the mean time I will try the note that you had provided and would get back to you very soon.
Regards,
Nitin

UPLOAD OF EMPLOYEE BP FROM CRM TO ECC

Hi all,
Is it possible to upload Employee Business Partners from CRM to ECC system.
as per client business process we create Employee Business Partners in CRM system and they need to upload in to ECC system.
I have worked on downloading of Employees data from ECC to CRM using ALE IDOC.
Please suggest whether it is feasible or not? If standard solution is available kindly let me know.
Your help will be highly appreciated.
Best regards,
Raghu ram

Hi ,
The common practice is to download "Employee" from ECC to CRM thru ALE IDOC ,
But you can also take another approach :
1) Create employee as business partner in role "BUP003" "employee" in SAP CRM .
you can create manually or you can use BP upload program in CRM.
2) You need to configure "internal number range " for business partner "emplyee " in CRM , and "External " in ECC Backend
3) set up middleware for replication of BP from CRM to ECC .
4) Business partners - EMPLOYEES create in CRM will be replicated to ECC as Business partner ( and not as HR employee )
hope this helps,
PD

What are the steps to send sales order custom field from CRM to ECC

Hi Xperts,
We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
Thanks in Advance.

Hi Anjaneyulu,
We are faced with a similar situation as you.
Here is our scenario with the steps that we performed so far:
1. We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
2. On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
Could you please give us the steps that you have done.

Configuration is not replicated from CRM to ECC for configurable product

Hi,
We have some materials in the system for which the configuration is not replicated from CRM to ECC.
We create a quotation in CRM and configure it. In CRM, the configuration is complete and components are properly exploded but when we check the same quotation in ECC, configuration is incomplete with respect to some characteristics and product references.
Please find below finding
1. If the same material is created in another plant/company code, the configuration is replicated properly.
2. We have also checked that the BOM is completely maintained for plants for which configuration is replicated. But we dont think so it could be an issue since if we create the quotation in ECC instead of creating in CRM, for the plant (for which the configuration is not replicated from CRM to ECC), it is properly exploded and complete.
3. variant prices are replicated properly even though components are not replicated.
We need to know if we can explode the BOM in the configuration even though complete BOM for the particular plant is not maintained. If its not possible to explode, why it is possible for us to explode the BOM in the configuration in quotation.
Please advise.
Thx.

the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC?

Replication of storage loaction issue from crm to ecc

Similar Messages

Maybe you are looking for