Replication of transportation zones & regions
Hello All,
Does anybody has experience in replication of transportation zones & regions from ECC to SRM ?
Thanks
Ganesh
Hello Community,
Any inputs?
In our landscape this is happening successfully for CRM with the customizing object DNL_CUST_BASIS5
but not for SRM
Thanks
Ganesh
Similar Messages
-
Transportation zone does not exists
hi,
its urgent
plz resolve this
i have to create the bdc program so before
there is a problem in transportation zone fields in xd01 , i am give the data for particular fields but it does not exists
while am press the f4 key, it should ask the project, i dont understand further. plz tell the solutions clearly.
regards
surender
early responsers should be rewardedAs per SAP documentation,
Sales and distribution
the system automatically proposes a suitable route by using the transportation zone of the goods recipient in combination with other information about the delivery, such as the
Countries of origin and destination
Shipping conditions
Transportation group
Example
In the USA, for example, you can define regional zones to correspond to the US postal zip codes.
You can see the values for Transportation zones in TZONE table. The zones are defined at a country level.
Hope this helps. Reward points if the answer is useful.
Thanks,
Balaji -
Transport Zone in Customer Master
Hi All
Can any one explain me how the trasport zone assign in customer master I configared the trsport zone in customisation I also find it help in customer master but Transport Zone fild is disable so can't update it in customer master
Pl helpAs per SAP documentation,
Sales and distribution
the system automatically proposes a suitable route by using the transportation zone of the goods recipient in combination with other information about the delivery, such as the
Countries of origin and destination
Shipping conditions
Transportation group
Example
In the USA, for example, you can define regional zones to correspond to the US postal zip codes.
You can see the values for Transportation zones in TZONE table. The zones are defined at a country level.
For enabling the Transportation Zone, go to OBD2 transaction. Edit the Account Group of the customer and edit the field status group under General Data -> Address for transportation zone.
Hope this helps. Reward points if the answer is useful.
Thanks,
Balaji -
Transportation Zone doesn`t exist?
Hi guys,
I have in our project the following error message when I use the transaction BBPGETVD.
Message: "The transportation zone XXX is not defined for country ZZZ"
I found within the SPRO the point where I can put the transportation zone, but it`s impossible to do manually for the entire records.
*I would need a way where those data will be transported together with vendor data or then to ignore those data during replication. Is there a adpater object for this R3AC3, R3AC4, R3AC5? *
I`m seeing the erros in SLG1.
SRM 7
Again, I need help from you, consultants. Please.
Thanks a lotWe did a BADI for this case.
-
What is transport zone in customer create :control
what is transport zone in customer create :control
Transportation zone to or from which the goods are delivered
Sales and distribution:
- Regional zone of Goods recipient.
Purchasing:
- Regional zone of supplier.
Use
You can define regional zones to suit the requirements of your own
business and country.
Sales and distribution
the system automatically proposes a suitable route by using the
transportation zone of the goods recipient in combination with other
information about the delivery, such as the
- Countries of origin and destination
- Shipping conditions
- Transportation group
Example
In the USA, for example, you can define regional zones to correspond to
the US postal zip codes. -
User Exit Or BADi for Ship-to-Party's Transportation Zone F4 Help in VA01
Dear Experts,
I want to change the F4 help of Transportation Zone in Ship-to-Party Address in VA01.
I have to show the possible entries from Z table which is compared by the city of that particular customer.
Explanation:
1. Go to Transaction VA01.
2. Enter the values in first screen and Enter.
3. select the sold to party and ship to party and Enter.
4. Enter any item in item level.
5. Press Display Doc. Header ICON.
6. Go to partners tab.
7. Double click on Ship to party.
8. One Pop up screen will open. (ie. Address from Master Data for Ship-to-Party (Document Header).
9. Press F4 help for the field Transportation Zone. (It will show the possible entries from the table TZONE (All records).
10. I want to show the possible entries only for that particular city.(For a particular city there may be more than one transportation zone. I will maintain these records in Z table ).
I have tried all user exit from the program MV45AFZZ and ADDRESS_SUBSCREEN BAdI. But I could not get the solution.
Please help help me to do this.
Thanks,
MaruthamuthuHi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu. -
Change Transportation Zone in Sales Order creation
Hi Gurus,
I am looking for an user-exit to overwrite the transportation zone for the ship-to party while creating the Sales order.
Actually the order is getting created thru IDOC. The segment E1EDKA1 with PARVW 'WE' contains all the data including name, street, city, phone etc. But there is no option(field) to send this transporation zone (LZONE). In the sale order creation program, it is automatically picking it up from VBPA for the customer. I need to overwrite this one with a different value. Is there any User-exit available to accomplish?
For your information its PO-SO process. A KBZI order will be created. Using the PR generated from this order, we need to create the PO that in turns automatically creating an Intercompany Sales Order ( thru IDoc). In this second Sales Order, I need to overwrite the transportation zone based on the initial order.
Thanks in advance,
Vijay.>
Murphy wrote:
> I modified the value at runtime KUVEW-LZONE. But this values is keep on getting modified by XVBPA-LZONE for the customers...
How about if we modifiy the value of XVBPA-LZONE itself at runtime in Routine either USEREXIT_SAVE_DOCUMENT or USEREXIT_SAVE_DOCUMENT_PREPARE?
See if the values of KUVEW-LZONE or XVBPA-LZONE in our hand in above exit? -
How to get GUID_ZONE for Transport Zone bapi
Can any one please tell me how to get GUID_ZONE so that I can use it in BAPI /SCTM/BAPI_ZONE_SAVEMULTI
std transaction (t.code - /n/scmtms/zone) is getting it from somewhere but i am not able to find out.
Please help.Hi,
Repling for someone who will be in need.
My issue is fixed, but I have used other BAPI, as earlier BAPI gave me real trouble.
new bapi which I am using is :
BAPI_TZSRVSCMB_SAVEMULTI
Here I didnt get any GUID issue, and I am able to load Transport Zone,
Note : Zone hearachy will be filled later after zone load separately, so i am not filling Zone hearachy internal table of this new bapi.
AMIT. -
Customer Master zone Customer Transportation Zone Is Greyed
Dear Friends
I want to make customer master transportation zone field to be optional entry.I did necessary changes in OBD2,OB20 and OVT0.After making optional entry in all area it is been with grey mode that is not editable.But if I change as required entry then it is changed as required field that is editable mode.But I need only optional entry.Can any one help me on this...
Regards
Ganesh
Posting in all CAPs or BOLD, represents shouting, kindly avoid this in your future post.
Message was edited by Moderator: Jyoti PrakashI did necessary changes in OBD2,OB20 and OVT0
In OB20, which one you have selected and through which tcode you were checking?
G. Lakshmipathi -
Enhancement/Exit for transportation zone while creating/changing customer
Hi,
I want Enhancement/Exit for chnging transportation zone while creating/changing customer.HI,
I used inmplicit enhancement .
and change kna1-lzone
but still previous value is store.
no changes made.
even i changed
addr_chg = 'X'. -
ORDERS: transportation zone of partner
Hi,
Given that on IDoc field exists for transportation zone at E1EDKA1, I tried to enhance the function module IDOC_INPUT_ORDERS. Fields XVBADR-LZONE and XVBPA-LZONE can be populated with transportation zone values with the enhancement. However, that value is not actually saved to sales order partner information. I also tried enhancement under such user exits as EXIT_SAPLVEDA_001. However, it still doesn't work. How can I fill "Transportation Zone" in IDoc?
Best regards,
tsyes, the validity is ok.
The error message for FB00 is:
ACCESS NOT MADE (INITIALIZED FIELD)
Field in condition table - Field in document - Value in document
Service agent Service agent 1058
Dest.zone Dest zone !(exclamation pnt)
The problem is that system doesn't find dest zone in document.
Why?
I have defined it in customer master. -
Hai All,
I m using 11g JDeveloper. I am facing one problem while running one sample program, which has been downloaded from the net.Error is - "Time zone Region not Found" Where I can set the Time zone property?
Could u please help me to solve this error.
Thanks in advance
Jithesh
Edited by: Jithesh on Feb 3, 2009 6:18 PMFrom Oracle Messages 'Cause and Action'
http://www.oracle.com/technology/products/designer/supporting_doc/des9i_90210/cmnhlp72/messages/ora_messages.htm
ORA-01882, 00000, "timezone region %s not found"
Cause: The specified region name was not found.
Action: Please contact Oracle Customer Support.
Maybe invalid region in NLS_LANG?
"select * from v$nls_parameters"
Starting this script in all developer program and compared result... -
How to change ship to party' Transportation zone when create a order ?
Hi,
I want to change ship to party' Transportation zone when create order with VA01 before save.
what user ecit can be used? I modify the Transportation zone in the table xvbpa in program MV45AFZZ, but it does work.
Please help ~
Thank you~Hi,
Try to use Fm BAPI_SALESORDER_CHANGE
in table u can find
PARTNERS Communications Fields: SD Document Partner
PARTNERCHANGES Partner changes
and use UPDATEFLAG when you change -
Transportation Zone in the ship to party changed after delivery
Dear Guru,
Earlier when the user was creating sales order and the delivey the transportation zone for the ship to party was france, now before billing he has changed the transportation zone to netherlands.
When he created billing, tax MWST was not getting triggered. i asked him to create pricing condition for Export tax, but it is not heling us.
If he changes the transportation zone for the ship to party and try to crete billing will it help to trigger MWST.
Reg,
NZHi Nayaz,
You should maintain create condition records for MWST from vk11 in access sequence like (departure country/destination country, domestic, and export taxes). additionally, maintain your route determination regarding of your requirement and customer and material master billing tax tab should be maintained according to this configurations.
I hope these will solve your problem.
Regrds, -
Dear Peers,
In my CRM Prod client have all the transport zones of ECC, now the same transport zones need to maintain in CRM Test client.
what is the action that i need to do?
1. raise customize request
2. manually maintain in test cleint
3. anyother solution
please advise
Thanks,Hi,
I did not understand....
Did you perform the initial load in test client? in ECC there are 200 transp. zones? and in crm are there how many transp. zones?
Best regards,
Caíque Escaler
Maybe you are looking for
-
Cannot access photos on the phone - iPhone 3G 16GB
Hi there I am no longer able to access the photos on my phone - even though I have a suspicion they still exist. Background info as follows: I was transferring photos from my iPhone 3G recently to my WinXP PC at work, I had about 200-odd photos (quit
-
How to add an app to a key combination
How to add an app to a key combination
-
TV episodes on IPod touch -- HELP PLEASE!
I bought a tv episode, but it will not sync to my IPod touch. I have enough storage space, and when I click on the episode it says ITunes cannot locate the file. What do I do?
-
Linux 3.10 ext4_da_writepages err -30 after remount ro
I have a device formatted with ext4 (no_auto_da_alloc,data=ordered). During shutdown, when I try to force remount as read-only, the mounted filesystem. sync;echo "u" > /proc/sysrq-trigger I see these ext4 errors after remount 76.209728 Emergency Remo
-
"Scrambling" an integer on the fly: what's it called?
I want to scramble "on the fly" integers (between 0 and 100,000) into some 15-byte Strings or 15-byte numbers (or shorter). I have no doubt that I could come up with a simple mathematical algorithm, but surely this method must exist already in some l