Replication of vendor master ac from employee in HR
Hi Experts,
My client looking to create vendor master account in accounts payable when hire the employee in HR, or if employee bank details infotype change should also replicate in vendor master account, Could any one let me know is standard practice in SAP or need to do development. Let me knowthe path to customize.
Note: client having HR and FI in two different clients.
Surya.
Hi,
There is dedicated SAP report for that.
You should start transaction PRAA and investigate different options and figure out what is needed for you.
Cheers!
Similar Messages
-
Creating Vendor Master Records from HR Master Records
Dear Experts,
I have been using t-code PRAA to create vendor master records from HR master records. The client would like to have one vendor number for a group of employees (in this case external contractors all working for the same company). The system won't allow me to link several PERNR to one LIFNR (i.e. error message).
Is it, however, possible to do this?
Thank you.
Edited by: Philip on Jan 14, 2011 9:58 PMHi ,
PRAA has one to one relation ship , means it created 1 vendor for 1 employee .
If you are using PERNR then you cant use one vendor to may PERNR .
Either create them as individual vendor or else have a manual control system in place where in you will have to create a dummy PERNR and then allocate all the cost to this invidual vendor , if you are paying the check to only 1 contractor for say 100 contract employees you can use this .
else it is a better mechanism and control to have 1 is to 1 in case of employee to vedor .
Regards ,
Dewaang T. -
*Journal Entries while uploading the vendor master data from legacy system*
hi SAP Folks,
can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
thanks in advance.
Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PMHi
you will be having only one entry logically
i.e. Opening Bal. clrng A/c Dr.
To Vendor A/c Cr.
regards -
Error while replicating vendor master data from R3 to SRM
Hi,
I am trying to replicate Vendor master data from the R3 system to SRM system(7.0) for the first time and am facing the following error :
Organizational unit 50000004 does not exist; check entries
Message no. BBP_BUPA034
I have gone through the other posts with similar issues but haven't been able to find a solution.
Any ideas?
Thank you.hi sahlini
did you create a vendor organisation structure via PPOCV_BBP ? SINCE YOU REFER THIS NUMBER 50000004 WHAT IS THIS?
BR
\MUTHU -
Upload vendor master data from legacy system to internal table tcode xk01
through batch input program how to upload vendor master data from legacy system to internal table and then to SAP R/3 database(transaction XK01) by using recording method.
By learning the basics of BDC recording and the use of GUI_UPLOAD
-
Modify vendor number when replicating vendor master data from ECC to SRM
Hi,
Is there a way to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
Does anyone have documentation on the user exit, how do I use it??
Thanks and Regards'
DavidHi David,
Please go through the link below:
[Enhancement SAPMF02K Vendor Master Data - question about LIFNR;
Regards
Anirban -
Function Module to send Vendor Master Data from SRM to ECC
Hi Guys
I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. ThanksHi,
Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
Hope this helps.
Regards,
Hemanth -
Error importing vendor master data from ERP
Hi experts,
currently we are trying to import vendor master data from ERP to SAP Sourcing 9.
We exported the data in an XML file by using the transaction BBP_ES_MAST_DOWNLOAD.
We already imported all the dependencies like vendor account group, purchase org, regions etc. successfully.
However, every time we are trying to import the vendor data we receive the same result:
Data Import:
Trace.txt:
Do you have any hints why this happens?
Thanks in advance and best regards,
JohannesHello Johannes,
This looks to come from a custom script in your system.
Go to Setup > Script Definition and check all scripts defined on class "Supplier" (starting with those on context: Import Lifecycle Event).
Search for a script that starts with "throw doc.createApplicationException(test..."
Regards,
Bogdan -
Updating Vendor Master Address from HR Master using PRAA
Hi All,
When PRAA updates the Address into the Vendor Master from Infotype 6 subtype 1, does it consider the Second Street address as well?
Some employees have 2nd address line populated in their IT0006 record and this isnt showing in their vendor account.
Regards,
Anjali.Hi Anjali,
No, the sttandard program does not update any subtypes of infotype 0006 other than subtype 0001. However, you can adapt this to suit your needs: an empty routine is supplied in the includes RPRAPAEX and RPRAPAEX_001 which you can adapt to your requirements You must implement the user exit routine 'set_address_by_user'. An experienced ABAP programmer can do this.
Regards,
Rodrigo -
Vendor Master Extraction from Legacy
Hi guys,
We have 2 different legacy systems here (4.5b and 4.6c) and I am trying to extract the vendor master from both of them and integrate them into the new mysap2004.
What is the best way to extract the vendor master along with the address , punchasing doc, bank details, partner functions,etc ? Any sample program for vendor master extraction is most welcome. Here is my extract layout.
ADDRESS
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
SZA1_D0100 Title (TITLE_MEDI) CHAR/30 Not used
ADDR1_DATA Name (NAME1) CHAR/40 Bring values over as is.
ADDR1_DATA Name (NAME 2) CHAR/40 Bring values over as is.
ADDR1_DATA Name (NAME 3) CHAR/40 Bring values over as is.
ADDR1_DATA Name (NAME 4) CHAR/40 Bring values over as is.
ADDR1_DATA Search Term 1 (SORT1) CHAR/20 Convert to HPC methodology.
O-First 8 char. of vendor name
R- First 8 char. of vendor name
B- First 8 char. of vendor name
ADDR1_DATA Search Term 2 (SORT2) CHAR/20 Bring values over as is.
ADDR1_DATA Street/House Number
(Street) CHAR/60 Bring values over as is.
ADDR1_DATA House Number
(HOUSE_NUM1) CHAR/10 Bring values over as is.
ADDR1_DATA Building (number or code)
(BUILDING) CHAR/20 Bring values over as is.
ADDR1_DATA Room or apartment number
(ROOMNUMBER) CHAR/10 Bring values over as is.
ADDR1_DATA Floor in building
(FLOOR) CHAR/10 Bring values over as is.
ADDR1_DATA c/o name
(NAME_CO) CHAR/40 Bring values over as is.
ADDR1_DATA Street 2
(STR_SUPPL1) CHAR/40 Bring values over as is.
ADDR1_DATA Street 3
(STR_SUPPL2) CHAR/40 Bring values over as is.
ADDR1_DATA Street 4
(STR_SUPPL3) CHAR/40 Bring values over as is.
ADDR1_DATA Street 5
(LOCATION) CHAR/40 Bring values over as is.
ADDR1_DATA City
(CITY1) CHAR/40 Bring values over as is.
ADDR1_DATA District
(CITY2) CHAR/40 Bring values over as is.
ADDR1_DATA City (different from postal city)
HOME_CITY CHAR/40 Bring values over as is.
ADDR1_DATA City postal code
(POST_CODE1) CHAR/10 Zip Code. Bring values over as is.
ADDR1_DATA Country
(COUNTRY) CHAR/3 Bring values over as is.
ADDR1_DATA Region (State, Province, County)
(REGION) CHAR/3 E.g., NJ New Jersey, CO Colorado, etc. Bring values over as is.
ADDR1_DATA Time Zone
(TIME_ZONE) CHAR/6 Bring values over as is.
ADDR1_DATA Transportation Zone
(TRANSPZONE) CHAR/10 Bring values over as is.
ADDR1_DATA Regional Structure Group
(REGIOGROUP) CHAR/8 Bring values over as is.
ADDR1_DATA P. O. Box
(PO_BOX) CHAR/10 Bring values over as is.
ADDR1_DATA P.O. Box Postal Code
(POST_CODE2) CHAR/10 Bring values over as is.
ADDR1_DATA Language Key
(LANGU) LANG/1 Bring values over as is.
SZA1_D0100 Telephone
(TEL_NUMBER) CHAR/30 Bring values over as is.
SZA1_D0100 Telephone Number Extension
(TEL_EXTENS) CHAR/10 Bring values over as is.
SZA1_D0100 Fax
(FAX_NUMBER) CHAR/30 Bring values over as is.
SZA1_D0100 Fax Extension Number
(FAX_EXTENS) CHAR/10 Bring values over as is.
SZA1_D0100 E-mail
(SMTP_ADDR) CHAR/240 Bring values over as is.
ADDR1_DATA Standard Communication Type
(DEFLT_COMM) CHAR/3 Bring values over as is.
ADDR1_DATA Data Line
(EXTENSION1) CHAR/40 Not used. Do not bring over field values.
Note: This field will be available to populate with other data during the conversion.
ADDR1_DATA Telebox
(EXTENSION2 CHAR/40 Not used. Do not bring over field values.
Note: This field will be available to populate with other data during the conversion.
ADDR1_DATA Comments
(REMARK) CHAR/50 Bring values over as is.
CONTROL
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
LFA1 Customer
(KUNNR) CHAR/10 Bring values over as is.
LFA1 Authorization
(BEGRU) CHAR/4 It is to be determined if this field will be used in the future. If yes, bring values over as is from HPC and populate with vendor account group code for Foods.
LFA1 Trading Partner
(VBUND) CHAR/6 Bring values over as is.
LFA1 Group Key
(KONZS) CHAR/10 Not used
LFA1 Tax Code 1
(STCD1) CHAR/16 Bring values over as is.
LFA1 Tax Code 2
(STCD2) CHAR/11 Bring values over as is.
LFA1 Fiscal Address
(FISKN) CHAR/10 Bring values over as is.
LFA1 Jurisdiction Code
(TXJCD) CHAR/15 Bring values over as is.
LFA1 VAT Registration No.
(STCEG) CHAR/20 Bring values over as is.
LFA1 Tax Office
(FISKU) CHAR/10 Bring values over as is.
LFA1 Tax Number
(STENR) CHAR/18 Bring values over as is.
LFA1 Industry
(BRSCH) CHAR/4 Bring values over as is.
LFA1 Train Station
(BAHNS) CHAR/25 Not used.
LFA1 Transportation Zone
(LZONE) CHAR/10 Bring values over as is.
LFA1 Actual QM Sys.
(QSSYS) CHAR/4 Bring values over as is.
LFA1 QM System To
(QSSYSDAT) DATS/8 Bring values over as is.
LFA1 DAK
(J_1FDAK) CHAR/8 Bring values over as is.
PAYMENT TRANSACTIONS
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
LFBK Bank Country Key
(BANKS) CHAR/3 Bring values over as is.
LFBK Bank Key
(BANKL) CHAR/15 Bring values over as is.
LFBK Bank Account
(BANKN) CHAR/18 Bring values over as is.
BNKA Bank Name
(BANKA) CHAR/60 Foods - Bring values over as is.
HPC Populate with Bank Account Number
LFA1 Alternative Payee
(LNRZA) CHAR/10 Bring values over as is.
LFA1 Individual Spec.
(XZEMP) CHAR/1 Bring values over as is.
LFA1 Spec. Per. Reference
(XLFZA) CHAR/1 Bring values over as is.
ACCOUNTING INFORMATION ACCOUNTING
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
LFB1 Recon. Account
(AKONT) CHAR/10 Bring values over as is.
LFB1 Sort Key
(ZUAWA) CHAR/3 Bring values over as is.
LFB1 Head Office
(LNRZE) CHAR/10 Bring values over as is.
LFB1 Authorization
(BEGRU) CHAR/4 Bring values over as is.
LFB1 Cash Mgmnt Group
(FDGRV) CHAR/10 Bring values over as is.
LFB1 Release Group
(FRGRP) CHAR/4 Bring values over as is.
LFB1 Minority Indicator
(MINDK) CHAR/3 Bring values over as is.
LFB1 Certification Date
(CERDT)
DATS/8 Bring values over as is.
LFB1 Interest Indicator
(VZSKZ) CHAR/2 Bring values over as is.
LFB1 Last Key Date
(ZINDT) DATS/8 Bring values over as is.
LFB1 Interest Cycle
(ZINRT) NUMC/2 Bring values over as is.
LFB1 Last Interest Run
(DATLZ) DATS/8 Bring values over as is.
LFB1 Withholding Tax Code
(QSSKZ) CHAR /2 Bring values over as is.
LFB1 Withholding Tax Country
(QLAND) CHAR /3 Bring values over as is.
LFB1 Recipient Type
(QSREC) CHAR /2 Bring values over as is.
LFB1 Exemption Number
(QSZNR) CHAR /10 Bring values over as is.
LFB1 Valid Until
(QSZDT) DATS/8 Bring values over as is.
LFB1 Exemption Authority
(QSBGR) CHAR /1 Bring values over as is.
LFB1 Previous Account No.
(ALTKN) CHAR /10 Do not bring over existing values. Will populate during vendor conversion when legacy vendor number is replaced by a new vendor number.
LFB1 Personnel Number
(PERNR) NUMC/8 Bring values over as is.
PAYMENT TRANSACTIONS ACCOUNTING
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
LFB1 Payment Terms
(ZTERM) CHAR/4 Refer to data mapping spreadsheet later in this spec.
LFB1 Tolerance Group
(TOGRU) CHAR/4 Bring values over as is.
LFB1 Credit Memo Terms
(GUZTE) CHAR/4 Bring values over as is.
LFB1 Chk. Double Inv.
(REPRF) CHAR/1 Bring values over as is.
LFB1 Chk. Cashing Time
(KULTG) DEC/3 Bring values over as is.
LFB1 Payment Methods
(ZWELS) CHAR/10 Refer to data mapping spreadsheet later in this spec.
LFB1 Alternate Payee
(LNRZB) CHAR/10 Bring values over as is.
LFB1 Individual Payment
(XPORE) CHAR/1 Bring values over as is.
LFB1 Bill of Exchange Limit
(WEBTR) CURR/13
Decimal/2 9999999999999.99 Bring values over as is.
LFB1 Payment Advance By EDI
(XEDIP) CHAR/1 Bring values over as is.
LFB1 Payment Block
(ZAHLS) CHAR/1 Bring values over as is.
LFB1 House Bank
(HBKID) CHAR/5 Not used. Do not bring forward existing values.
LFB1 Grouping Key
(ZGRUP) CHAR/2 Bring values over as is.
LFB1 Payment Method Supplement
(UZAWE) CHAR/2 Bring values over as is.
LFB1 Alternate Payee Indicator
(XLFZB) CHAR/1 Bring values over as is.
LFB1 Tolerance Group
(TOGRR) CHAR/4 Bring values over as is.
CORRESPONDENCE ACCOUNTING
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
LFB5 Dunning Procedure
(MAHNA) CHAR/4 Bring values over as is.
LFB5 Dunning Recipient
(LFRMA) CHAR/10 Bring values over as is.
LFB5 Last Dunned
(MADAT) DATS/8 Bring values over as is.
LFB5 Dunning Clerk
(BUSAB) CHAR/2 Bring values over as is.
LFB5 Dunning Block
(MANSP) CHAR/1 Bring values over as is.
LFB5 Legal Dunning Proceedings
(GMVDT) DATS/8 Bring values over as is.
LFB5 Dunning Level
(MAHNS) NUMC/1 Bring values over as is.
LFB1 Grouping Key
(MGRUP) CHAR/2 Bring values over as is.
LFB1 Local Processing
(XDEZV) CHAR/1 Bring values over as is.
LFB1 Acct. Clerk
(BUSAB) CHAR/2 Bring values over as is.
LFB1 Account with Vendor
(EIKTO) CHAR/12 Bring values over as is.
LFB1 Clerk at Vendor
(ZSABE) CHAR/15 Bring values over as is.
LFB1 Acct. Clk. Tel. No.
(TLFNS) CHAR/30 Bring values over as is.
LFB1 Clerks Fax
(TLFXS) CHAR/31 Bring values over as is.
LFB1 Clerks Internet
(INTAD) CHAR/130 Bring values over as is.
LFB1 Account Memo
(KVERM) CHAR/30 Bring values over as is.
PURCHASING DATA
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
LFM1 Order Currency
(WAERS) CUKY/5 Bring values over as is.
LFM1 Terms of Payment
(ZTERM) CHAR/4 Refer to data mapping spreadsheet later in this spec.
LFM1 Incoterms (Part 1)
(INCO1) CHAR/3 Refer to data mapping spreadsheet later in this spec.
LFM1 Incoterms (Part 2)
(INCO2)
CHAR/28 Bring values over as is.
LFM1 Minimum Order Value
(MINBW) CURR/13
Decimal/2 9999999999999.99 Bring values over as is.
LFM1 Schema group, vendor
(KALSK) CHAR/2 Bring values over as is.
LFM1 Pricing Date Cat.
(MEPRF) CHAR/1 Bring values over as is.
LFM1 Order Optim. Rest
(BOPNR) CHAR/4 Bring values over as is.
LFM1 Salesperson
(VERKF) CHAR/30 Bring values over as is.
LFM1 Telephone
(TELF1) CHAR/16 Bring values over as is.
LFM1 Acc. With Vendor
(EIKTO) CHAR/12 Bring values over as is.
LFM1 GR. Based Inv. Verif.
(WEBRE) CHAR/1 Bring values over as is.
LFM1 Auto.Eval. GR Setmt. Del.
(XERSY) CHAR/1 Bring values over as is.
LFM1 Auto.Eval. GR Setmt. Ret.
(XERSR) CHAR/1 Bring values over as is.
LFM1 Acknowledgement Reqd.
(KZABS) CHAR/1 Bring values over as is.
LFM1 Automatic Purchase Order
(KZAUT) CHAR/1 Bring values over as is.
LFM1 Subsequent Settlement
(BOLRE) CHAR/1 Bring values over as is.
LFM1 Subseq. Sett. Index
(BOIND) CHAR/1 Bring values over as is.
LFM1 B. Vol.Comp./Ag. Nec.
(UMSAE) CHAR/1 Bring values over as is.
LFM1 Doc. Index Active
(BLIND) CHAR/1 Bring values over as is.
LFM1 Returns Vendor
(KZRET) CHAR/1 Bring values over as is.
LFM1 Srv.-Based Inv. Ver.
(LEBRE) CHAR/1 Bring values over as is.
LFM1 ABC Indicator
(LFABC) CHAR/1 Bring values over as is.
LFM1 Mode Of Transport-Border
(EXPVZ) CHAR/1 Bring values over as is.
LFM1 Office of Entry
(ZOLLA) CHAR/6 Bring values over as is.
LFM1 Sort Criterion
(SKRIT) CHAR/1 Bring values over as is.
LFM1 PROACT Control Prof.
(PAPRF) CHAR/4 Bring values over as is.
LFM1 Revaluation Allowed
(XNBWY) CHAR/1 Bring values over as is.
LFM1 Grant Discount In Kind
(NRGEW) CHAR/1 Bring values over as is.
LFM1 Relevant for Price Determination
(PRFRE) CHAR/1 Bring values over as is.
LFM1 Relevant for Agency Business
(AGREL) CHAR/1 Bring values over as is.
LFM1 Shipping Conditions
(VSBED) CHAR/2 Bring values over as is.
LFM1 Purchasing Group
(EKGRP) CHAR/3 Bring values over as is.
LFM1 Planned Delivery Time
(PLIFZ) DEC/3 Bring values over as is.
LFM1 Confirmation Control
(BSTAE) CHAR/4 Bring values over as is.
LFM1 Unit of Measure Group
(MEGRU) CHAR/4 Bring values over as is.
LFM1 Rounding Profile
(RDPRF) CHAR/4 Bring values over as is.
LFM1 Price Marking Agreed
(LIPRE) CHAR/2 Bring values over as is.
LFM1 Rack jobbing service agreed
(LISER) CHAR/1 Bring values over as is.
LFM1 Order entry by vendor
(LIBES) CHAR/1 Bring values over as is.
LFM1 Serv. Level
(VENSL) DEC/4
Decimal/1 Bring values over as is.
PARTNER FUNCTIONS
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
WYT3 Partner Function
(PARVW) CHAR/2 Bring values over as is.
WRF02K Number (Partner)
(GPARN) CHAR/10 Map to new partner number in vendor correlation table.
ALTERNATE DATA
(Purchasing Data)
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
LFM2 Order Currency
(WAERS) CUKY/5 Bring values over as is.
LFM2 Terms of Payment
(ZTERM) CHAR/4 Refer to data mapping spreadsheet later in this spec.
LFM2 Incoterms (Part 1)
(INCO1) CHAR/3 Refer to data mapping spreadsheet later in this spec.
LFM2 Incoterms (Part 2)
(INCO2)
CHAR/28 Bring values over as is.
LFM2 Minimum Order Value
(MINBW) CURR/13
Decimal/2 Bring values over as is.
LFM2 Schema group, vendor
(KALSK) CHAR/2 Bring values over as is.
LFM2 Pricing Date Cat.
(MEPRF) CHAR/1 Bring values over as is.
LFM2 Order Optim. Rest
(BOPNR) CHAR/4 Bring values over as is.
LFM2 Salesperson
(VERKF) CHAR/30 Bring values over as is.
LFM2 Telephone
(TELF1) CHAR/16 Bring values over as is.
LFM2 Acc. With Vendor
(EIKTO) CHAR/12 Bring values over as is.
LFM2 GR. Based Inv. Verif.
(WEBRE) CHAR/1 Bring values over as is.
LFM2 Auto.Eval. GR Setmt. Del.
(XERSY) CHAR/1 Bring values over as is.
LFM2 Auto.Eval. GR Setmt. Ret.
(XERSR) CHAR/1 Bring values over as is.
LFM2 Acknowledgement Reqd.
(KZABS) CHAR/1 Bring values over as is.
LFM2 Automatic Purchase Order
(KZAUT) CHAR/1 Bring values over as is.
LFM2 Subsequent Settlement
(BOLRE) CHAR/1 Bring values over as is.
LFM2 Subseq. Sett. Index
(BOIND) CHAR/1 Bring values over as is.
LFM2 B. Vol.Comp./Ag. Nec.
(UMSAE) CHAR/1 Bring values over as is.
LFM2 Doc. Index Active
(BLIND) CHAR/1 Bring values over as is.
LFM2 Returns Vendor
(KZRET) CHAR/1 Bring values over as is.
LFM2 Srv.-Based Inv. Ver.
(LEBRE) CHAR/1 Bring values over as is.
LFM2 ABC Indicator
(LFABC) CHAR/1 Bring values over as is.
LFM2 Mode Of Transport-Border
(EXPVZ) CHAR/1 Bring values over as is.
LFM2 Office of Entry
(ZOLLA) CHAR/6 Bring values over as is.
LFM2 Sort Criterion
(SKRIT) CHAR/1 Bring values over as is.
LFM2 PROACT Control Prof.
(PAPRF) CHAR/4 Bring values over as is.
LFM2 Revaluation Allowed
(XNBWY) CHAR/1 Bring values over as is.
LFM2 Grant Discount In Kind
(NRGEW) CHAR/1 Bring values over as is.
LFM2 Relevant for Price Determination
(PRFRE) CHAR/1 Bring values over as is.
LFM2 Relevant for Agency Business
(AGREL) CHAR/1 Bring values over as is.
LFM2 Shipping Conditions
(VSBED) CHAR/2 Bring values over as is.
LFM2 Purchasing Group
(EKGRP) CHAR/3 Bring values over as is.
LFM2 Planned Delivery Time
(PLIFZ) DEC/3 Bring values over as is.
LFM2 Confirmation Control
(BSTAE) CHAR/4 Bring values over as is.
LFM2 Unit of Measure Group
(MEGRU) CHAR/4 Bring values over as is.
LFM2 Rounding Profile
(RDPRF) CHAR/4 Bring values over as is.
LFM2 Price Marking Agreed
(LIPRE) CHAR/2 Bring values over as is.
LFM2 Rack jobbing service agreed
(LISER) CHAR/1 Bring values over as is.
LFM2 Order entry by vendor
(LIBES) CHAR/1 Bring values over as is.
LFM2 Serv. Level
(VENSL) DEC/4
Decimal/1 Bring values over as is.
ALTERNATE DATA
(Partner Functions)
Source File /Table Name Field Name Field Type / Length Format Rule / Logic
WYT3 Partner Function
(PARVW) CHAR/2 Bring values over as is.
WRF02K Number (Partner)
(GPARN) CHAR/10 Map to new partner number in vendor correlation table.Hi Shareen,
Have you looked Master Data Distribution (ALE) for Vendor since your legacy system are SAP?
Please check t/code BD14 (Send Vendor Master Data) and BD15 (Get Vendor Master Data).
Hope this will give you an idea.
Regards,
Ferry Lianto -
Create Vendor Master Record from HR Master Record
Hi All,
I am running PRAA Transaction Code, While running I am getting this Error.
Employee for whom a vendor master record already exists.
Personnel Number missing in company code segment.
Then I went to SM35 but did not found any batch.
Please can anyone explain the entire process.
Thanks and Regards
Ravi Narayan Padhi
Edited by: Ravi Narayan Padhi on Jan 11, 2012 11:45 AMHello
In the report RPRAPA00, there is parameter ' 'Create new company code segment for existing vendor master records' as a checkbox under the 'Initial setup' maintenance mode, and it offers you the following option:
If there is a vendor master record already available for a predefined personnel number, but it does not have a company code segment for the company code in which the employee is situated for the key date entered,then program RPRAPA00 supplements the vendor master record with the required company code segment.
In your case, the company code already exist, so it will not create or add a new one with this option.
This only works for "First creation" and not for updating. You need to use "update" or "change" in the setting to do this.
Thanks and Kind Regards
Ramana -
Field Mobile phone (ADR2-R3_USER) vendor master changed from Blank to 1
Hi
Where I can find Mobile phone (ADR2-R3_USER) in Vendor master.
We have updated Purchasing block to vendor master via LSMW and after that if i am going to see the changes in vendor master (XK03)
Found that the field Mobile phone (ADR2-R3_USER) changed from BLANK to ONE
Field Mobile phone (ADR2-R3_USER)
from
to 1
Not sure what happened.
Can any one throw some ides on this?
Regards
JaiHello,
F1 on the field ADR2-R3_USER gave the below information. Check if this is useful.
Indicator: Telephone is a Mobile Telephone
This field specifies whether the telephone number is a mobile telephone number.
Input values
' ' : The telephone number is a fixed-line telephone
'1' : The telephone number is the standard fixed-line telephone
'2' : The telephone nubmer is a mobile telephone
'3' : The telephone number is the standard mobile telephone
Dependencies
Either the standard fixed-line telephone number or the standard mobile telephone number is also the standard telephone number (FLGDEFAULT = 'X').
In older data sets, this field may have also have the value ' ' for the standard fixed-line telephone. In this case, however, FLGDEFAULT is always 'X'.
Effects on Customizing
In Customizing, you can specify whether the SMS-compatible indicator is to be proposed for new mobile telephone numbers created in dialog by choosing General Settings -> Set countries -> Define Mobile Telephone Attributes for each country.
Cheers
Balaji -
Default Payment terms from Vendor Master not from Reference PO
Hello guys,
I am creating a PO in reference to another PO and payment terms are copied from the old PO but not updating from Vendor Master. Our payment terms are changed very frequent and our users don't want to create a new PO with too many line items so they just copy an old PO.
IS there a way to update payment terms form Vendor Master after copying an Old PO? I know this is pretty standard functionality but just trying to see if we can trick the system,
Thanks
Ronnie.If so then convert this into an error message ensuring that the correct payment term to appear in the message, that the users need not search themselves and find out for updating the payment term
One thing is that there is no configuration available for you take care of this automatically, there has to be user exit solution. -
Vendor master maintenance from one client to other
Hi,
Vendor master will be created in a production client and transferred to other client using ALE.
The changes will be made only in first prodcution client.
For any changes in vendor master of those vendorsin first production client, needs to get updated in the second client too.
Eg.
I have 10 vendors in first client and 6 is related to second client.
I am modifying the all the vendors. When i execute BD21 it selects all the vendors and posts to the destination(second) client.
But, we would like to send idocs related to Second client vendors only.
Note: We are identifying the second client vendors using a match code in a different table.
We would like the system to check, for these match code for identifying the vendors and send the idoc..
Can you help on this please?
Thanks in advance,
SasiHi,
1. If your vendor changes should be updated from one system to other system through ALE, we need to active the change pointers.
2. Change points can be activate through Tcode SALE
3. After activating change points and your distribution model is ready, you can execute the program RBDMIDOC to genarate the IDOCs.
4. Normally this program will be executed in the background
5. And as you said, you have to do some validations before sending IDOCs. For this you can Filters and rules in the DM.
OR you can write the code in user-exists of outbound posting program.
Rewards if this info is useful.
Thanks, -
Vendor Master transactions from external application
Hi..
I have to Create(XK01), Change(XK02), Block(XK05) and Delete(XK06) Vendor Master from an external application.
This application is able to interact with SAP using RFC/BAPI and IDOC, but I only found BDC as a way to achieve this. How does this work? Can I 'wrap' a BDC into a BAPI and remote-enabled this BAPI to my application?
All help welcome (and examples too
Cheers,
AdzyHi Andreas,
Thank you for your reply.
BAPI_VENDOR_CREATE seems to be used in a dialog; the response was:
"RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user"
I going back digging a bit more...
Thank you and regards,
Adzy
Maybe you are looking for
-
Why do I get this error when specifying a parameter from the URL?
Hello, I am trying to "install" a parameter in a page, so that it's value can be specified in the URL and a VO updated according to this value. Here's is the page definition file, with an executable and a binding to a method call: <executables> <invo
-
I DO NOT want to use iMessage and WILL NOT give them my login. The frigging login box keeps popping up and keeps me from using my iPhone. I did not install anything. Cannot get past it. OK, Cancel, OK, OK, OK,OK,Cancel, Cancel, Cancel, Tried off/on.
-
Hello Im tryng to implement a Dropdown Menu on hover just like the many available in the guides online but now i want to add some custom changes and i have no idea how, so i tought this was a great place to gather some information : a) i want to gro
-
after yosemite update i cannot connect with my printer, canon pima mp 810. canon say it is no longer supported!!!!!!!!
-
This may be a stupid question for most of you but please help me. I am developing an application where the server bean is on a different machine(server machine) than the client. The client is a windows box whereas the server is linux. After deploying