Replication port used in TimesTen 5.1.35

Hi,
Can you please tell me what is the default port number used by TimesTen replication in version 5.1.35 ?
Regards
Pratheej

If you're using AUTO port assignment for replication (ie not specifying a PORT in your Create Replication SQL), then use ttRepAdmin -showstatus to see what the port is that's been assigned by the OS. This is also specified in the timestend.log when the replication threads are starting up. There isn't a default port used otherwise. The agent will just use whatever it's assigned by the OS on each startup.

Similar Messages

TT12039: Could not get port number of TimesTen replication agent on remote

i use the "ttRepAdmin -duplicate -from yymhcc_active -host mt2 -setMasterRepStart -uid musicclub -pwd musicclub -remoteDaemonPort 17001 -keepCG -cacheUid musicclub -cachePwd musicclub -localhost "mt4" yymhcc_standby;"
TT12039: Could not get port number of TimesTen replication agent on remote host. Either the replication agent was not started, or it was just started and has not communicated its port number to the TimesTen daemon
at the mt4 machine :
ping mt2
PING mt2 (10.25.71.26) 56(84) bytes of data.
64 bytes from mt2 (10.25.71.26): icmp_seq=1 ttl=64 time=0.138 ms
64 bytes from mt2 (10.25.71.26): icmp_seq=2 ttl=64 time=0.108 ms
at mt2
ttAdmin -query yymhcc_active
RAM Residence Policy : manual
Manually Loaded In RAM : True
Replication Agent Policy : manual
Replication Manually Started : True
Cache Agent Policy : manual
Cache Agent Manually Started : True
and
repschemes;
Replication Scheme Active Standby:
Master Store: YYMHCC on MT2
Master Store: YYMHCC_STD on MT4
Excluded Tables:
None
Excluded Cache Groups:
None
Excluded sequences:
None
Store: YYMHCC on MT2
Port: 21000
Log Fail Threshold: (none)
Retry Timeout: 30 seconds
Compress Traffic: Disabled
Store: YYMHCC_STD on MT4
Port: 20000
Log Fail Threshold: (none)
Retry Timeout: 30 seconds
Compress Traffic: Disabled
1 replication scheme found.

when i use: ttRepAdmin -duplicate -from yymhcc -host mt2 -setMasterRepStart -uid musicclub -pwd musicclub -remoteDaemonPort 17001 -keepCG -cacheUid musicclub -cachePwd musicclub -localhost "mt4" yymhcc_standby
TT8179: Cannot create duplicate store : store already exists
master odbc config :
[yymhcc_active]
Description=For Active Master
Driver=/usr/local/timesten/TimesTen/tt70/lib/libtten.so
DataStore=/usr/local/timesten/TimesTen/yymhcc/yymhcc
DatabaseCharacterSet=ZHS16GBK
ConnectionCharacterSet=ZHS16GBK
Authenticate=1
OracleID=yymhcc
OraclePWD=mc
UID=mc
PWD=mc
#ipcs memory size(M)
PermSize=8192
Connections=2047
#permsize*20%
TempSize=1024
PassThrough=1
WaitForConnect=0
Isolation=0
Logging=1
DurableCommits=0
CkptFrequency=600
CkptLogVolume=256
#LogBuffSize=256000
LogBuffSize=524288
LogFileSize=256
LogFlushMethod=1
LogPurge=1
LockLevel=0
LockWait=5
SQLQueryTimeout=5
RecoveryThreads=16
subscriber config :
[yymhcc_standby]
Driver=/usr/local/timesten/TimesTen/tt70/lib/libtten.so
#DataStore=/usr/local/timesten/TimesTen/yymhcc_std/yymhstd
DatabaseCharacterSet=ZHS16GBK
ConnectionCharacterSet=ZHS16GBK
Authenticate=1
OracleID=yymhcc
OraclePWD=mc
UID=mc
PWD=mc
PermSize=8192
Connections=2047
#permsize*20%
TempSize=1024
PassThrough=1
WaitForConnect=0
Isolation=0
Logging=1
DurableCommits=0
CkptFrequency=600
CkptLogVolume=256
#LogBuffSize=256000
LogBuffSize=524288
LogFileSize=256
LogFlushMethod=1

ACS 4.2 - is it possible to change replication port?

Hi,
trying to find out if it some tweek to change the ACS replication port TCP/2000 to something else.
I know it's possible to make a different policy-map or to not inspect the Skinny protocol to avoid conflict, but that not the solution I'm looking for. Wondering if anybody knows of a different way to change the replication port in ACS 4.2.

Hi,
what is the version of ACS you are running?
If you are running ACS 4.2.1.15 then,
Problem :
=========
ACS replication port re-configuration.
Resolution :
============
Please follow the following steps:
1. Interface configuration > Advanced Options > Check the checkbox ACS
Communication Port Configuration.
2. System Configuration > service control > Configure the Port to be
used for the ACS Internal Communication (choose any port between 2010 to
2025)
Regards,
Anisha
P.S.: please mark this thread as resolved if you think your query is answered.

How to read a data from USB port using JAVA

hi all,
i need to know how to read a data from USB port using java. any API are available for java ?.........please give your valuable ideas !!!!!!!!!
Advance Thanks!!

You can do this. Please use this link
[http://www.google.co.in/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=uHu&q=java+read+data+from+usb+port&btnG=Search&meta=&aq=f&oq=]
What research did you do of your own? Have you done some testing application and tried yourself??

One or more ports used by the Compute Emulator are currently used by other processes

Environment:
VS 2012 Professional
Azure SDK October 2012
Windows 8
I lost the last few days of my life struggling with a weird issue in the emulator. I just ran out of options and I would really appreciate if someone could help me figure out what's wrong.
I am trying to debug a service package from Visual Studio 2012. It's really just about any package -- even the ones generated from a Windows Azure Cloud Service VS template. Any. The VS debugger starts, and in parallel there's "Starting the Windows Azure Debugging
Environment" dialog which shows "Deploying service package to the Windows Azure compute emulator..." message.
The progress bar shown in the dialog gets stuck for a long time (possibly even for an hour or longer!) at some 60% and then the following error message is shown:
"One or more ports used by the Compute Emulator are currently used by other processes. To resolve this, please see MSDN documentation at http://msdn.microsoft.com/en-us/library/hh472164.aspx"
There doesn't seem to be anything else listening on the ports mentioned on the above MSDN page. I did nevertheless try to re-map devfabric and agent ports by specifying different values in the .config files mentioned on the page, but that did not help.
What I also tried and did not help:
- reinstalled SDK, IIS Express, Local DB
- reinstalled VS 2012 (yes, I got that desperate)
- tried using IIS instead
- used SysInternals TcpView to check if there are any conflicts
- rebooted the machine: the deployment works initially (*once*), and the subsequent deployments fail (!)
- tried to kill all Azure-related processes in memory and restart debugging
- tried looking into log files under the user directory (dftmp\...); no errors in *any* log
- tried looking into Event Viewer logs (Azure-related and in general); no errors either
Since the conflict seems to be related to my current network settings, below is my IP
configuration. I am behind a router and I have DHCP activated, but again that should not matter since none of that has changed in the last few years (and the emulator did work until few days ago).
C:\WINDOWS\system32>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : MYCOMPUTER
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
   Physical Address. . . . . . . . . : 32-AB-30-66-BC-56
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2a01:e35:8a3a:9970:edd9:b989:b67a:5a8a(Preferred)
   Temporary IPv6 Address. . . . . . : 2a01:e35:8a3a:9970:dc7a:4fe6:62a5:e54a(Preferred)
   Link-local IPv6 Address . . . . . : fe80::edd9:b989:b67a:5a8a%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.0.1(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Sunday, December 16, 2012 21:26:30 PM
   Lease Expires . . . . . . . . . . : Tuesday, December 18, 2012 09:26:14 AM
   Default Gateway . . . . . . . . . : fe80::224:d4ff:fea2:9722%12
                                       192.168.0.254
   DHCP Server . . . . . . . . . . . : 192.168.0.254
   DHCPv6 IAID . . . . . . . . . . . : 253808432
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-1B-EE-4D-20-CF-30-66-BC-46
   DNS Servers . . . . . . . . . . . : 192.168.0.254
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7A96B710-3107-48B9-A7B2-2F261DDD91AD}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:1caf:12ff:a75c:5668(Preferred)
   Link-local IPv6 Address . . . . . : fe80::1caf:12ff:a75c:5668%14(Preferred)
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Disabled
Below are the Azure SDK emulator configuration files, unmodified (as created by the SDK installation).
DevFC.exe.config
<configuration>
    <configSections>
        <section name="DevFCSettings"        type="System.Configuration.NameValueSectionHandler" />
    </configSections>
    
    <DevFCSettings>
        <add key="StartMACAddress" value="00155D201928" />
        <add key="EndMACAddress" value="155D20193C" />
        <add key="StartIPAddress" value="192.168.0.20" />
        <add key="EndIPAddress" value="192.168.0.40" />
        <add key="DipPoolStartIPAddress" value="127.255.0.0" />
        <add key="DipPoolEndIPAddress" value="127.255.255.255" />
        <add key="VipPoolStartIPAddress" value="127.0.0.1" />
        <add key="VipPoolEndIPAddress" value="127.0.0.255" />
        <add key="DefaultGateway" value="192.168.0.1" />
        <add key="SubnetMask" value="255.255.255.0" />
        <add key="InternalSwitchName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricSwitch" />
        <add key="InternalSwitchPortName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricHostSwitchPort" />
        <add key="InternalEthernetNICName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricEthernetNIC" />
        <add key="InternalEthernetPortMACAddress" value="00155D201927" />
        <add key="InternalEthernetPortIPAddress" value="192.168.0.2" />
        <add key="InternalEthernetPortSubnetMask" value="255.255.255.0" />
        <add key="StorageRoot" value="DFTemp" />
        <add key="LogsDirName" value="DevFCLogs" />
        <add key="DynamicPortAllocStart" value="20000" />
        <add key="ManagementServicePort" value="15095" />
        <add key="RepositoryServicePort" value="15096" />
        <add key="AgentCallbackPort" value="15097" />
        <add key="AgentPort" value="15098" />
        <add key="PxeResponderPort" value="15100" />
    </DevFCSettings>
    <startup>
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
    </startup>
</configuration>
DFAgent.exe.config
<configuration>
<startup>
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
<appSettings>
    <add key="AgentMAC" value="00155D201927"/>
    <add key="AgentIP" value="192.168.0.2"/>
    <add key="EnableActiveNotification" value="false"/>
    <add key="StorageRoot" value="C:\DFTemp"/>
    <add key="CopyFilesInStartRole" value="false"/>
    <add key="LogsDirName" value="DFAgentLogs" />
    <add key="EnableFileLog" value="true" />
    <add key="AgentPort" value="15098" />
    <add key="RuntimePort" value="15099" />
    <add key="AgentCallbackPort" value="15097" />
</appSettings>
</configuration>
DFService.exe.config
<configuration>
<configSections>
    <section
      name="dfservice"
      allowExeDefinition="MachineToLocalUser"
      type="Microsoft.ServiceHosting.Tools.DevelopmentFabric.DfServiceConfigurationSection, DfService, Version=1.8.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
    />
</configSections>
<dfservice
    ManagementServicePort="15095"
    RepositoryServicePort="15096"
   />
<startup>
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
</configuration>
Finally, here's what TcpView shows while the emulator is stuck:
devenv.exe   3736   TCP      MYCOMPUTER   7240   localhost   15095   SYN_SENT
devenv.exe   3736   TCP      MYCOMPUTER   7245   localhost   15095   SYN_SENT
svchost.exe   4332   TCP      MYCOMPUTER   7438   MYCOMPUTER   0   LISTENING
System        4        TCP      MYCOMPUTER   10000   MYCOMPUTER   0   LISTENING
System        4        TCP      MYCOMPUTER   10001   MYCOMPUTER   0   LISTENING
System        4        TCP      MYCOMPUTER   10002   MYCOMPUTER   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15095   MYCOMPUTER   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15096   MYCOMPUTER   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15097   MYCOMPUTER   0   LISTENING
DFAgent.exe   14472   TCP      MYCOMPUTER   15098   MYCOMPUTER   0   LISTENING
DFAgent.exe   14472   TCPV6   mycomputer   15098   mycomputer   0   LISTENING
DFAgent.exe   14472   TCPV6   mycomputer   15098   mycomputer   6399   ESTABLISHED
System        4        TCP      MYCOMPUTER   15099   MYCOMPUTER   0   LISTENING
System        4        TCPV6   mycomputer   15099   mycomputer   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15100   MYCOMPUTER   0   LISTENING
Thanks in advance for help!
▼
▲
▼
▲

Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲

Path and filename containt the list of port used by OAS R3

Could someone tell me the path and the file name that contains the port used by OAS R3.
Thanks

Previous versions used to have $OH/install/portlist.ini, this one doesn't but you can check ports used in....
httpd.conf
Check for directives
Port
Listen
opmnctl status -l
this will tell you the ports used by the OC4J, for rmi, ajp and jms for each one.
And I think with this will do the trick, or if you need more, tell me.
Regards.

How to transfer file from PC to PC via serial port using labview

I need to transfer files(.txt, .doc, .xls) from PC to PC via serial port using LabVIEW. Is it possible to transfer files, if so how to transfer?
Solved!
Go to Solution.

Yes, it is possible to transfer files with the serial port using LabVIEW. Files are just collections of bytes and the serial port is pretty good at shipping bytes from one PC to another. You need to connect the serial ports together with a null modem cable.
First, take a look at the example for serial communication. In LabVIEW, go to the Help menu and select "Find Examples...". From there you can search for "serial" or navigate to Hardware Input and Output >> Serial. Select the "Basic Serial Write and Read.vi". Experiment with that example to gain confidence on the serial communication methods.
Next, it's time to learn about how to read and write files. For that, the examples could be somewhat confusing since they all deal with files that are presumed to have data of a specific type in them. I would recommend just getting familiar with the functions on the File I/O palette. Specifically, get to know the following functions.
Open/Create/Replace File - On your destination side, you'll need to create the copy of the file that you are trying to transfer
Close File - When you are finished reading from or writing to a file, you should close it. It cleans up the memory being used and finalizes any write operations that are still floating in the write buffer.
Read From Binary File - The best way to read from a file when you do not really care what type of file it is. In your case, you just want to get those bytes read and sent out so they can be written down at the destination.
Write to Binary File - At the destination side, this is what will store those bytes to the file you created with number 1.
Get File Size (under the Advanced File Functions sub-palette) - You need to know how big the file is so you know when you are finished.
OK, so once you are able to create files, write bytes to them, and read bytes from existing files you can move on to transferring.
The basic method I would suggest is to have the user specify a source file on the source PC and a destination folder on the destination PC. Then, find out the size of the source file using number 5. Divide that size number by the number of bytes you feel like transferring at once. The serial buffers are usually around 32k (if I remember correctly) so do not exceed that. Now begin sending data by reading some number of bytes and wiring that string output to the VISA Write function. On the destination side, you'll want to be monitoring the serial port for bytes and reading them when they arrive. Wire that string to the Write to Binary File function to add them to your destination file.
That is the basic outline of how to do it. You have to be careful not to overload the write and read buffers on the serial ports. Initially you can use delays on the sending side to make sure the reading side has enough time to digest. To get things moving faster, you can bring in some flow control.
If all that sounds a bit intimidating, there are Alliance Member companies out there (such as PrimeTest Automation) who can write such code for you and even provide a turnkey solution for you.
Happy wiring,
Dan Press
Certified LabVIEW Architect
PrimeTest Automation

Add and Remove Publishers from Replication Monitor using T SQL

Is there any possibility to add an Publishers from Replication Monitor using T SQL.i am trying to configure the replication using T SQL..i can create all other steps but didn't find any way to add publisher to the replication monitor..kindly suggest..

Hi Snehasis,
Tom is correct, there is no T-SQL command to add a publisher to Replication Monitor. However, the server from which you launch Replication Monitor will automatically be added to Replication Monitor if it is a Publisher. Also, you can add additional
Publishers using the Add Publisher dialog.
This is covered in
Add and Remove Publishers from Replication Monitor
Brandon Williams (blog |
linkedin)

In time capsule, can ethernet ports used for windows pc as a LAN?

in time capsule, can ethernet ports used for windows pc as a LAN?

i am connecting my windows pc to the time capsule ethernet prots but those pcs are not shown in my macbook or those windows pc also can not see my macbook pro. i am facing the problem...

Can I conect iMac 2012 with thundelbolt to iMac 2008 mini display port use this iMac like second monitor.

Can I conect iMac 2012 with thundelbolt to iMac 2008 mini display port use this iMac like second monitor.

This Apple article:
What are the requirements for TDM?
suggests that older iMac do not support Target Dispaly Mode.

How can i get the port used for https

Hi All,
does aynbody knows how can i get in the portal the port used for https connection, cause the link send by e-mail notification, when user has been invited in a room doesnt work...
i tried to use the command netstat -ao and i tried use the port that i get there.. but then i get message, when click on the link: "The page cannot be displayed"
we have following settings:
server port: ??
Web Protocol: https://
Thanks for suggestions!
Karol

Hi Karol,
by navigating to:
Content Administration -> Collaboration Content -> (Room Administration -> Related Topics) -> Configure Backend Properties for Rooms
you can change the Webprotocol to http:// and set server port to 50000 (default port).
To see the SSL Port you can go in the Visual Administrator to Services -> "HTTP Provider Services".
http://help.sap.com/saphelp_nw04/helpdata/en/a2/f9d7fed2adc340ab462ae159d19509/frameset.htm
Hope this helps,
Robert

Problem while creating logical port using soamanager

Hi all,
I have created a client proxy for web service from a 3rd party system.
When i am creating a logical port for the same consumer proxy i get a error as follows:
RABAX_STATE -e: UNCAUGHT_EXCEPTION
and a dump saying
" The exception 'CX_SXMLP' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program
'CL_SXMLP_FRAGMENT=============CP' has to be terminated.
Please suggest what can be done or what can be the problem.
Thanks in advance.
Komal

Pls go to txn SM59 and check if the RFC destination for webservice is working in the test connection.
Then go to txn LPCONFIG and create the logical port using the RFC dest. Pls mention the path suffix appropriately.
Next in your code while instantiating the client proxy pass the logical port name in the constructor (if the LP is not maintained as default).
Pls reward points if the tips are helpful.

Change port used to send SMTP e-mail

I am trying to send e-mail notifications using a .vi. My company has blocked SMTP port 25 to prevent SPAM. My IT has told me that there is another port I can use to send e-mail. It is possible for me to change, IN LABVIEW, the port used to send e-mail?
Thank you.

Without modifying NI's SMTP library the answer is no. The port they use (25, standard SMTP port) is hardcoded in their library.
Message Edited by Mark Yedinak on 09-15-2009 10:31 AM
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

WCF static send port, use of custom behavior to change the endpoint location?

The send port is outbound to various web service endpoints, all of which is the same WSDL just different location. Prefer to use the static port for features like ordered delivery. Is it possible to change the Microsoft.XLANGs.BaseTypes.Address dynamically
by a custom behavior?
https://ninithepug.wordpress.com/

Hi,
You can make static send ports partially dynamic, this can be achieved in a custom pipeline component in the send pipeline.
You should refer to the below mentioned articles:
Adding dynamic behavior to static send ports
Using a Static Send Port like a Dynamic Send Port
Rachit
Please mark as answer or vote as helpful if my reply does

"how to read parallel port using labview"

"i am doing a bio medical project and need to read data from parallel port using labview. can anyone help me"

Hi
in most cases a simple example helps best.......see attachment. Find in addition in Word document a helpful picture of LPT - Pins.
In case you work with WinNT, W2k, XP - you need to install accesshw.
Regards
Werner
Attachments:
printer_port_test.zip ‏41 KB
dsub_25_parallel_port.doc ‏29 KB

Replication port used in TimesTen 5.1.35

Similar Messages

Maybe you are looking for