Replicator and shapes question

Does anyone know of a way to import an Illustrator (text saved as an outline) file into Motion and be able to use it as a "Shape Source" under the "Geometry" setting of a Replicator. Basically I'd like to use the outlines of a text object in the same way that you can create a bezier shape within Motion and attach cells to its edge. Picture (if you will) a sign with lights traveling along the edge of each letter. Thats what I want to create. I was able to do this using the Bezier shape tool but I was hoping for an easier way. If I try to import a PDF file the replicator wants to use the edge of the object not the edge of the outlines. Any suggestions?
Thanks in advance.

Hi, thanks for the link. I took a look at this script a while back and whereas I'm sure it would work (because the Shake tracker to Motion script works) unfortunately I'm still using Illustrator 10. I think I even tried this script before and it wouldn't work with version 10.
Anybody else?

Similar Messages

  • T430s w port replicator and monitor question

    Runs fine and please with it. Is it possible to close the T430s and still use it? What do I need to do to run the desk monitor and close the T430s? Seems I should be able to do so.  Thanks for your help and time. klm

    what OS are you using?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Question for "Hyper-V replica" and "replica server"

    On the replica server, is it possible to have and operate other VMs, that are not replicas to existing VMs ?

    Hello DimiterS,
    Yes, sure you can run VM workloads on both Hyper-V hosts which are participating in Hyper-V Replica and vice versa.
    For example, you can have DC01 on HV01 and DC02 on HV02 and then replicate DC01 to HV02 and DC02 to HV01.
    No, you cannot have replication from Hyper-V 2012 to Hyper-V 2012 R2, you need to maintain the same Windows Server version on the physical host.
    One advise, I would strongly recommend you to exclude the Paging File disk from replication, you can change the location of the System Page File inside the Guest OS to another disk/volume and then exclude it during the replication wizard, this will help
    to reduce the replicated traffic and I/O since the paging files are constantly changing. More information
    here.
    Hope this help.
    Regards,
    Charbel Nemnom
    MCSA, MCSE, MCS, MCITP
    Blog: www.charbelnemnom.com
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark
    as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Converting Microsoft dpm Replica and RP volumes into Virtual Tape Format

    Hello All, 
    We need to migrate protected data-source that is from P3000 to D
    We purchased a HP Storeonce 2700  backup device and it does not support iSCSI disk. It support iSCSI tape, that is iscsi connection to Virtual Tape library. 
    The problem is how can I migrate my replica and recovery-point-volumes to Tape Drives (VTL).
    Can I convert disk data to tape format.

    Hi,
    The best you can do it add long term tape backup goal in each protection group - then you can use the below DPM power shell script to make a backup for all PG's to tape.  That will only backup to tape the "last" successful disk based recovery
    point.
    # prompts Shortterm or longterm backup type.
    # prompts for protection group name or ALLPG to backup.
    # Will backup PG's to tape and if verify is set on the PG the verify will run.
    # Tested on DPM 2012 R2
    # Last Modified 3-5-2014
    # CHANGE LOG
    # ==========
    # Ver 2.1 - listed PG's for goal selected
    # Ver 2.0 - Added shorthand for longterm shortterm, allowed to select ALL PG's, verified choices and added error checking
    # Ver 1.0 - Basic choices and only allowed a single PG.
    cls
    write-host
    write-host "version 2.1"
    $DPMservername= (&hostname)
    disconnect-dpmserver (&hostname)
    connect-dpmserver (&hostname)
    write-host
    write-host
    write-host
    if(!$protectiontype)
    $protectiontype = read-host "Select Tape Protection type L or S to run (L)ongterm or (S)hortterm) tape jobs"
    If ($Protectiontype -eq 'L')
    $protectiontype = 'Longterm'
    write-host "$protectiontype Selected"
    Write-host ""
    $protectedgroups = get-protectiongroup $dpmservername | where { $_.ProtectionMethod -like "*Long-term using tape*"}
    $protectedgroups.FriendlyName
    else
    If ($Protectiontype -eq 'S')
    $protectiontype = 'Shortterm'
    write-host "$protectiontype Selected"
    Write-host ""
    $protectedgroups = get-protectiongroup $dpmservername | where { $_.ProtectionMethod -like "*Short-term using tape*"}
    $protectedgroups.FriendlyName
    else
    write-host "Incorrect goal type selected - type L or S `n" -foregroundcolor yellow
    exit 0
    #check for PG with ST goals
    If ($Protectiontype -eq 'Shortterm')
    if(!$pgname)
    $pgname = read-host "Enter a Protection Group Name or ALLPG "
    if ($pgname -eq 'ALLPG')
    $protectedgroups = get-protectiongroup $dpmservername | where { $_.ProtectionMethod -like "*Short-term using tape*"}
    else
    $protectedgroups = Get-ProtectionGroup $DPMservername | where { $_.FriendlyName -eq $pgname} | where { $_.ProtectionMethod -like "*Short-term using tape*"}
    else
    #check for PG with LT goals
    if(!$pgname)
    $pgname = read-host "Enter a Protection Group Name or ALLPG "
    if ($pgname -eq 'ALLPG')
    $protectedgroups = get-protectiongroup $dpmservername | where { $_.ProtectionMethod -like "*Long-term using tape*"}
    else
    $protectedgroups = Get-ProtectionGroup $DPMservername | where { $_.FriendlyName -eq $pgname} | where { $_.ProtectionMethod -like "*Long-term using tape*"}
    if(!$protectedgroups)
    write-host "NO PG with goal" $protectiontype "type selected`n" -foregroundcolor yellow
    exit 0
    foreach ($pgname in $protectedgroups)
    write-host "`nGetting protection group" $pgname.friendlyname "in" $DPMservername "..."
    $clipg = Get-ProtectionGroup $DPMservername | where { $_.FriendlyName -eq $pgname.friendlyname}
    if($clipg -eq $abc)
    Throw "No PG found"
    write-Output "Getting DS from PG" $pgname.friendlyname "..."
    $backupds = @(Get-Datasource $clipg)
    foreach ($ds in $backupds)
    write-host
    write-host "Creating Recovery point for $ds" -foreground yellow
    $j = New-RecoveryPoint -Datasource $ds -Tape -ProtectionType $protectiontype
    $jobtype = $j.jobtype
    Write-Output "$jobtype Job has been triggerred..."
    # To serialize, wait for completion, and get final status, uncomment the below lines.
    #write-host "Waiting for $jobtype job to complete" -nonewline
    #while (! $j.hascompleted ){ write-host "." -nonewline; start-sleep 5}
    #write-host
    #if ($j.status -eq "Succeeded")
    # Write-host "Job $Jobtype completed successfully..."
    # $rp = @(get-recoverypoint $ds | ? { $_.datalocation -eq 'Media'})
    # $rpl = get-recoverypointlocation $rp[$rp.count-1]
    # $gt = get-tape -recoverypointlocation $rpl
    # $gtt += $gt
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.

  • Line and shape controls

    Where can I can the line and shape tools that are missing from my list of controls. Using Google and Microsoft site, I see there are "Power Packs". I found and downloaded the PowerPack 3, and the next time I start VS 2013 I get a long list of
    files flashing by on my screen, too fast to read. But I still don't have any reference to line or shape controls that I can find. I am uncomfortable about what this process has added to and changed on my system. Should I just re-install VS and try again?

    Where can I can the line and shape tools that are missing from my list of controls. Using Google and Microsoft site, I see there are "Power Packs". I found and downloaded the PowerPack 3, and the next time I start VS 2013 I get a long
    list of files flashing by on my screen, too fast to read. But I still don't have any reference to line or shape controls that I can find. I am uncomfortable about what this process has added to and changed on my system. Should I just re-install VS and try
    again?
    Possibly you didn't add shape tools from Choose ToolBox Items after you installed Visual Studio 2013 initially as all toolbox items are not automatically in the toolbox since they do not all need to be used commonly. Although you don't mention which VS 2013
    you installed and I've seen issues where Express versions either do not appear to come with PowerPacks or did not appear to come with PowerPacks at some earlier point in time which may have been resolved. It's also possible earlier releases of other versions
    of VS 2013 did not come with them. Because for some point in time people questioned about some VS 2013 Express versions as well as the Pro and I believe Ultimate versions not having powerpacks available so I used to provide links for version 12.0 for them
    which were at Microsoft but you couldn't find that link by searching at Microsoft downloads for some reason. I just happened to find it in some thread once when assisting somebody with that issue.
    Although as
    Jack-Zhai mentions PowerPack versions should be provided to Visual Studio which are for the version of Visual Studio you are using. It's probably a good idea to remove powerpack 3 although trying to find powerpack 12.0 doesn't seem very easy without a great
    deal of searching. And I'm not certain for a version of Visual Studio how to find out which rev of PowerPacks should be used with it.
    La vida loca

  • Scalability and Architecture Question

    I am currently working on an app that will generate a resume
    from a set of user defined input into several different formats
    from an XML file (MS Word, PDF, TXT, HR-XML, and HTML). We are
    thinking that we will write all the files once at publish time and
    then store them (not sure where yet). We are doing this because we
    will be hosting the online version of the resume as a CFM file with
    access to all the other formats of the resume from their online
    resume. We are assuming that there will be many more reads then
    their will be writes over the life of the resume. So we don't want
    to compile these each time a user requests one (that is a Word,
    PDF, HTML, or HR-XML version).
    The question I have now is should we store the files in the
    database or the webserver.
    I would think that it makes sense to store them on the
    webserver. But as this will need to be in a clustered environment
    then I will need to replicate these across the farm as each new
    user creates a resume. So does anyone know if the penalty for
    replicating these across the farm is higher then calling them from
    database. Assuming that the average file size is 50K and on average
    50 files will be called over the life of the resume. Thoughts?

    Originally posted by: fappel.innoopract.com
    Hi,
    RAP doesn't support session switch over at the moment, that's true. But
    it supports load-balancing by using multiple workers. But once a session
    is opened at one worker all requests of that session are dispatched to
    this worker.
    Ciao
    Frank
    -----Ursprüngliche Nachricht-----
    Von: Mike Wrighton [mailto:[email protected]]
    Bereitgestellt: Freitag, 22. August 2008 11:35
    Bereitgestellt in: eclipse.technology.rap
    Unterhaltung: Will RAP work in a load-balanced system?
    Betreff: Will RAP work in a load-balanced system?
    Hi,
    Some of my colleagues were reviewing scalability in our web architecture
    and the question was raised about RAP scalability, in particular the
    issue that since session data is stored in memory and not in a central
    database, RAP sessions would not survive a server switch-over by a load
    balancer. Hope that makes sense?
    I was just wondering if anyone had come across this issue before and
    found a decent solution? It may just be a case of configuring the load
    balancer properly.
    Thanks,
    Mike

  • Frame-relay traffic shapping question

    Dear all.
    i have a question related to the frame-relay traffic shapping question.cir is the commited rate. bc is the traffic which is sent during every ime interval. be is the excess burst.
    example. i have line 128kbps to service provider. 64 is my cir so in the map class frame-relay cir 64000 and bc is 8000 which means 8000 bits will go every interval which is by default 125ms.now about be. excess burst will go only in the first interval or every interval ? if i say frame be 32000. will 4000 additional bits go in every interval ?
    please advice .

    Here's my summary of shaping operation:
    * The token bucket used for shaping has a size of Bc+Be (if Be is zero, this equals Bc)
    * The token bucket starts off full i.e. with a capacity of Bc+Be
    * At the start of every Tc interval, Bc worth of tokens are added to the bucket. If the number of added tokens would result in the capacity of the bucket exceeding Bc+Be, these excess tokens are discarded.
    * After the tokens are added to the bucket, the shaper checks if there are any packets that are waiting to be transmitted. If there are, an equivalent number of bytes of packets as the token bucket contents are transmitted. If there are more packets than tokens, these packets will have to wait until the next Tc.
    * The capacity of the token bucket will approach Bc+Be only of the traffic has been quite for a little while.
    * The maximum amount of traffic that can be sent in any interval is Bc+Be, since that is the size of the token bucket. If the bucket has filled up to Bc+Be, this implies that the connection has been quiet for a little while so that we can allow it a little burst.
    * The long-term average of traffic will never exceed CIR, since the token bucket is filled at a CIR rate.
    Now, applying this to your example, the maximum size of the token bucket will be Bc + Be = 40000 bits. The bucket will fill up to this level only if there are no packets in the queue for a little while, allowing the bucket to fill up. Then, say that that a 1500 byte (12000 bits) packet comes along. It will be transmitted and the token bucket size reduced to 28000 bits. If there are more packets, they will be transmitted as long as the token bucket has sufficient packets. If there are no more packets, the token bucket will be filled with another 8000 bits (Bc) at the next measurement interval, giving a total of 36000 bits. Whether or not all the Be + Bc bits will be used up in the first interval depends on how many packets are waiting in the queue. If there are sufficient packets, they can all get used up. If not, they get carried forward to the next interval.
    Pls do remember to rate posts.
    Paresh

  • Account with an icon of a face and a question mark

    Same issue of other user in Yosemite Apple Support.
    Following advises on that thread I also installed the ETRECHECK software tool, report is as follows:
    Problem description:
    At the login screen I find an icon with a face and a question mark in it - with a message it needs an update.
    EtreCheck version: 2.1.5 (108)
    Report generated 02 gennaio 2015 12:37:26 CET
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 1:22:54
    Disk Information: ℹ️
      APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 498.89 GB (467.03 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox ApplicazioneHidden (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 600 - SDK 10.10
    Safari Extensions: ℹ️
      Pin It Button [Installed]
      Save to Pocket [Installed]
      Add To Amazon Wish List [Installed]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          14% WindowServer
          3% hidd
          2% Safari
          1% Dock
          0% fontd
    Top Processes by Memory: ℹ️
      333 MB com.apple.WebKit.WebContent
      155 MB mds_stores
      137 MB Safari
      137 MB Finder
      86 MB Dropbox
    Virtual Memory Information: ℹ️
      7.76 GB Free RAM
      4.88 GB Active RAM
      3.28 GB Inactive RAM
      1.26 GB Wired RAM
      4.73 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Jan 2, 2015, 11:15:06 AM Self test - passed
      Jan 2, 2015, 12:06:57 AM /Library/Logs/DiagnosticReports/Dropbox109_2015-01-02-000657_[redacted].cpu_res ource.diag [Details]
    ---------- is there any troubleshooting for delete that fake account every time I start my Macbook Pro?
    thanks and regards
    Edoardo

    Smiley face with a ? means a bootable system is not found.
    There maybe  a problem with either system software or hard drive itself.
    Try this.
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836
    Best.

  • Performance issue and functional question regarding updates on tables

    A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table.  Here is what I would have expected to see as the code.  Assume that both sets of code have a parameter called p_werks which is the plant in question.
    data : commit_count type i.
    select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
      update marc set zfield = wa_marc-zfield
         where werks = p_werks and matnr = wa_matnr.
      commit work and wait.
    endselect.
    I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else.  In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
                DO.
                  " Lock the record that needs to be update with material creation date
                  CALL FUNCTION 'ENQUEUE_EMMARCS'
                    EXPORTING
                      mode_marc      = 'S'
                      mandt          = sy-mandt
                      matnr          = wa_marc-matnr
                      werks          = wa_marc-werks
                    EXCEPTIONS
                      foreign_lock   = 1
                      system_failure = 2
                      OTHERS         = 3.
                  IF sy-subrc <> 0.
                    " Wait, if the records not able to perform as lock
                    CALL FUNCTION 'RZL_SLEEP'.
                  ELSE.
                    EXIT.
                  ENDIF.
                ENDDO.
                " Update the record in the table MARC with material creation date
                UPDATE marc SET zzdate = wa_mara-zzdate
                           WHERE matnr = wa_mara-matnr AND
                                 werks = wa_marc-werks.    " IN s_werks.
                IF sy-subrc EQ 0.
                  " Save record in the database table MARC
                  CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                    EXPORTING
                      wait   = 'X'
                    IMPORTING
                      return = wa_return.
                  wa_log-matnr   = wa_marc-matnr.
                  wa_log-werks   = wa_marc-werks.
                  wa_log-type    = 'S'.
                  " text-010 - 'Material creation date has updated'.
                  wa_log-message = text-010.
                  wa_log-zzdate  = wa_mara-zzdate.
                  APPEND wa_log TO tb_log.
                  CLEAR: wa_return,wa_log.
                ELSE.
                  " Roll back the record(un save), if there is any issue occurs
                  CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
                    IMPORTING
                      return = wa_return.
                  wa_log-matnr   = wa_marc-matnr.
                  wa_log-werks   = wa_marc-werks.
                  wa_log-type    = 'E'.
                  " 'Material creation date does not updated'.
                  wa_log-message = text-011.
                  wa_log-zzdate  = wa_mara-zzdate..
                  APPEND wa_log TO tb_log.
                  CLEAR: wa_return, wa_log.
                ENDIF.
                " Unlock the record from data base
                CALL FUNCTION 'DEQUEUE_EMMARCS'
                  EXPORTING
                    mode_marc = 'S'
                    mandt     = sy-mandt
                    matnr     = wa_marc-matnr
                    werks     = wa_marc-werks.
              ENDIF.
    Here's the question - why did this person enqueue and dequeue explicit locks like this ?  They claimed it was to prevent issues - what issues ???  Is there something special about updating tables that we don't know about ?  We've actually seen it where the system runs out of these ENQUEUE locks.
    Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!

    The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
    You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
    Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
    Regards

  • How can i restore my iphone 5s as i forgot my icloud password and sec questions

    I bought a new iphone 5s  (32G Gold)
    and when I connect it to itunes asked me to restore from my old iphone 4
    with all my account settings and passwords.
    but I have a problem with my account for icloud password and security questions because my cloude id is *************** and with no problem with my apple id "*****************", I tried to restore my new iphone after I turned off find my iphone from icloud setting and when its restore was finished the iphone is locked and asked me to unlock the iphone with a ****************** that I forget the password and security questions and when I tried to enter my account id "**************** with no problem with its password it says to me "this account can't unlock this iphone"
    when I visit tradeline (Apple products dealer) I found no answer and they adviced me to contact apple directly.
    Name : Alaa Rashed Abd el Hafiz
    Country : egypt
    <Personal Information Edited by Host>

    First, remove your personal information from your post.  That's not needed here.  This is a public forum, and it is unwise to provide your personal data online.
    Second, here's how you reset your password and/or security questions.
    How to reset your Apple ID password.
    Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
    Verify your date of birth, then click 'Next'.
    You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
    If neither method works, then go to https://getsupport.apple.com
    (If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.
    Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.
    How to reset your Apple ID security questions.
    Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
    Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
    Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.  This will generate an automated e-mail that will allow you to reset your security questions.
    If that doesn't work, or  there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
    Next, go to https://getsupport.apple.com
    (If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.
    Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.

  • I have purchased music with my old apple id, old computer and old email. My old email and computer are not available anymore and I dont remember my password and securtiy question anymore. How can I authorise my old apple id to authorise the new computer?

    Hi, I have a new computer and new apple id. I've purchased music with my old computer, email and apple id.
    I cant access now the previously purchase music, because it wants to authorize the new computer to play the
    music. I cant remember password and security questions for my old id and the old email doest exist anymore.
    What can I do?

    Hi, Carmen. 
    Thank you for visiting Apple Support Communities. 
    If you need to reset you security questions, do not know the answers and no longer have access to that email account, see the last sentence under Note in step 5.
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need tocontact iTunes Store support in order to do so.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/ht5312
    Cheers,
    Jason H.

  • Spam filtering solution for iPhone and a question.

    I've read a lot of posts about spam filtering for the iPhone and have yet another solution and a question. I use SpamSieve and I am not affiliated with them in any way. The nice thing about SpamSieve is that if it is the first rule in your Mail.app rule set any mail that follows has already been filtered. All you need to do then is create another rule that redirects email to what ever mail account you choose. Since my ISP allows multiple accounts, I will simply create an iPhone@myISP account.
    Now the question. Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
    Thanks

    Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
    not at present time

  • HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

    I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

    If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
    Boot  into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as  Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
    Now go to the Restore tab and reinstall from your backup.

  • Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

    Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

    You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (94816)

  • I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

    I want to integrate SMS gateway to Cisco ISE 1.2 and my question is 
    SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor 

    I'm not sure I understand the question.  Do you want to log in to the Sponsor Portal using AD credentials?
    Create an Identity Source Sequence using AD as an Authentication Source.  Go to Administration > Identity Management > Identity Source Sequences.  Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
    Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings.  Double-click Sponsor from the Left Menu and click Authentication Source.  Choose the Identity Source Sequence.  Click Save.
    I hope this helps.
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

Maybe you are looking for