Replied mail widget doesn't work

Hi there,
In Tiger Mail, when you replied to a message, a little back-arrow widget would appear in the inbox listing. When you clicked that little widget, the reply that you sent would pop up. Very handy! But in Leopard, nothing happens when you click that widget. What's up with that? Oversight? Bug? Caprice?

I don't think it's just your machine. I'm having the same problem. The message link seems to be there only about half the time since upgrading to Leopard (I'm using a MBP with latest upgrade) and then even when the link is there (the little curly arrow) some times the link is broken (I get an error message that says the message isn't there - but like you I do not delete anything from my sent folder and can verify that the message is there). I'm contemplating re-installing the operating system to see if that fixes the problem...

Similar Messages

TS3899 I have an iphone5 and the reply, forward and writing a message from the mail app doesn't work. I can check my mail but can't reply to it. What's going on?

I have an iphone5 and the reply, forward and writing a message from the mail app doesn't work. I can check my mail but can't reply to it. What's going on?

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

Updated to 10.4.9 and now weather widget doesn't work-what to do?

Hello-
Just updated to 10.4.9 tonight and for the first time since I bought this computer in August, the weather widget doesn't work.
Would anyone happen to know what I could do to get this to work. I am connected to the internet, I can access the accuweather.com that I think this widget connects to, I restarted and reset PRAM (not even sure if that has anything to do with it).
I just don't even know where to go from here to troubleshoot. Any suggestions would be appreciated... Thanks.

Just for the record... There is quite a bit of discussion about widgets. I only use the dictionary and iStat. I use WeatherPop in the taskbar, which resides in the taskbar...
It did it again this morning. I let it boot all the way, and then I went into system preferences to find the resolution that the display was using. It was 1400x1050. But there was a second display preferences window open. Basically... The computer was "mirroring" to a second non-existent monitor. I ran through the "detect displays" and it got rid of the second setting.
I've never had a second monitor hooked to the machine, and I've never messed with the display settings, other than to change wallpaper. I'm not sure how or why it turned on, but I think it's off now... Weird that it only did it every now and then.
Steve

My live corners widget doesn't work, how can i fix it ?

my live corners widget doesn't work, how can i fix it ?

jotapepea,
You may have a look at the list below. The easy ones are at the top.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Mail app doesn't work

Mail app doesn't work after Yosemite OSX upgrade. At first it didn't check email and now it doesn't boot. I tried many times, but nothing happens

Ok after nearly going crazy I read something about someone having a problem with a program related to fonts not being installed. I started up font book and now my problem is miraculously resolved... This is good and bad. I don't know why having font book running would resolve my problem or know what font is causing the programs not to work. As far as I know I didn't disable any system fonts. And the problem doesn't happen when font book is running, which is confusing me.

My "sent mail " tone doesn't work. All other tones do work. I've changed tones and rebooted. Still silent

"sent mail" tone doesn't work. All other tones do. What to do?
ILive changed tones and rebooted

Hi Gwing17,
Welcome to the Apple Support Communities!
I understand that all of your iPhone sounds are working as expected except for the Sent Mail sound. I understand that you have already changed the Sent Mail sound as well as reset your iPhone and the issue persists. In this situation, to isolate the issue, I would first recommend backing up your iPhone to either iTunes or iCloud.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
After you have backed up, I would recommend restoring your iPhone and setting it up as new to test the Sent Mail sound. If the sound works as expected, try restoring from your backup and test the sound again. Please let me know if the issue returns or if the sound still does not work when you set up your iPhone as a new device.
Use iTunes to restore your iOS device to factory settings - Apple Support
Cheers,
Joe

Widget doesn't work after updating to OSX 10.6.8

After installing the latest batch of updates, my sudoku widget doesn't work anymore. Anyone else having a problem like this, or know how to fix it?
I noticed on the website which created it that others are also having this problem in the last few days:
http://briandeboer.com/posts/sudoku-20-approaching-beta-status/
Thanks!

Someone posted the following on the Sudoku widget website:
"Just wanted to add to my previous post. This widget uses images “.png” files so the font issue has not affected it’s performance. After some digging I found WebKit2 was bundled with the latest Safari update (5.1 and 5.0.6). WebKit2 uses a whole bunch of new APIs rendering some old ones obsolete. My guess is as good as yours, but most likely the SudokuC controller inside the widget is referring to one of those obsolete APIs."
Does anyone know what this means, and can explain it to someone, like myself, who is not a programmer?
Also, does it seem like a relevant solution and/or cause of the problem?
Thanks!

HT6030 Since I did the update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

Since I did the Mavericks-update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

Hey Lukas Schmid,
The following resource may provide more help in troubleshooting Mail for OS X:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
For more information, you can also visit http://www.apple.com/support/mail/
Thanks,
Matt M.

"Reply To Sender" doesn't work with Yahoo Mail. Works OK in IE, so the problem is with Firefox. Please fix this NOW!

'Reply to Sender' only works with some emails. For example, with emails that appear to be identical except for the user name one will work OK with Reply To Sender and the next will not. For example, using Reply To Sender with [email protected] will work fine, but trying Reply To Sender with [email protected] doesn't work. I just get a blank email page with nothing on it. I have a laptop and a desktop and they both have the same problem. I've tried all of the suggestions for making changes in the various sections of the Tools Menu but nothing works. Email works fine in IE. I'm running Win7.

First, I would try disabling any Add-ons like Adblock Plus, or NoScript.
Second, possibly try disabling anti-virus
Third, if that didn't do it, I would then Restart FF in Safe Mode, and see if that worked.
Then, re-enable each individually, to see which is causing it.

Junk mail filter doesn't work all the time

Why doesn't the Junk mail filter work all the time? I click on mail like from Best Buy or Omni Hotels to go into junk mail but hardly any of their mail goes into Junk. Other sites go directly to Junk. If I click on a Best Buy mail to indicate it's Junk, shouldn't that work 100% of the time forever and ever?

The Junk filter is based on an analysis of the content of the message. It ignores the sender. (Filtering based on the sender is an ineffective way of dealing with true spam, since spammers use constantly-changing spoofed addresses.)
If you don't want mail from a legitimate sender like Best Buy, unsubscribe from their ads. If that doesn't work, make a Rule to delete or move the messages.

Google Maps Widget doesn't work after upgrade to Safari 4.0

After a lengthy bit of trouble shooting with an iWeb specialist yesterday, we reached a conclusion that somehow installing the release version of Safari 4.0 (released Monday, 6/8) causes the GoogleMaps widget to not function or display properly. Using backup harddrives of recent systems, the widget worked properly in OS X 10.5.7 running iWeb 3.0.1 with both Safari 3.2 and the BETA VERSION of Safari 4. On that same system, once I download and installed the release of Safari 4., the maps widget would not work or display properly.
To describe what doesn't work: None of the options (search field, address bubble, or zoom controls) appear regardless of what the user selects in the HUD when creating or editing the content. I am unable to pan and/or scroll around the map within its bounding box at all. The only thing I am able to do is edit the address field in the HUD and end up with a map with that location centered in the window.
The AppleCare specialist didn't have much response in that I think this is a brand new and VERY obscure bug.
I am curious to know if anyone else has exprienced this condition.

It may be obscure in iWeb but the Safari 4 update has messed up the Google maps in iPhoto big time. Be sure to report it as they are all related to the Safari 4 upgrade and probably only be solved by a Safari fix.
http://www.apple.com/feedback/iweb.html
OT

Mail: ANY doesn't work in smart mailboxes or rules?

I want to create a smart mailbox that will copy and archive all messages to/from a particular recipient and e-mails to/from others about the subject of most of the conversation with that recipient. I want the archiving to happen as they arrive in my inboxes and not automatically remove them from the servers--some I still need on the servers to access from multiple locations/machines.
But I can't even get to the archiving issue: the smart mailbox that says 'contains ANY message' meeting these rules:
contains recipient1
contains subject2
always has fewer messages than one that simply 'contains recipient1' so the ANY condition, that in boolean terms should be an OR combination, appears to functionally act as an AND.
When I tried to create a smart mailbox folder to contain two mailboxes, one for contains name1 and one for contains subject2, each of which separately works fine, clicking the smart mailbox folder containing both leaves the window empty, so I can't see the messages name1 and subject2 interlaced in the date sent order or any other. I just get one group or the other by clicking the submailboxes.
And trying to bypass the problem using rules doesn't work either--the 'any' command is as dysfunctional there as it is in the smart mailbox dialog. I can manually search for the relevant terms (recipient1 and subject2) and option+drag them to a mailbox for archiving, but this results in many duplications, especially if repeated over time, not a happy result.
Some searching here and googling suggests that the ANY command is problematic in this OS for a lot of people, but is there a known fix? Or a better way to create a 'smart' archive to do what I want?

Okay, I think I understand better now. So I just ran a test, by creating the following rule:
I specifically chose an address (obviously not the one shown) that I had a message from in my Inbox, and a word that was present in the subject line of several messages in my Inbox. When I ran this rule on my Inbox, it copied exactly the messages I would have expected into the test mailbox. Are you seeing different behavior with the same rule, or is your rule constructed differently?
If the difficulty is with running the rule, note that (as I said earlier) rules only run automatically on unread incoming messages. It won't run automatically on existing messages or on messages on an IMAP mail server that you have read on another device using (in which case they will have been marked as read). If you need to run this in such conditions, you'll have to either run the rule manually or run it via an AppleScript or something similar that is somehow (via something other than Mail) made to execute at certain times/intervals or under certain conditions.
And you're correct, a smart mailbox would be totally inappropriate for what you're trying to do! It would behave exactly as you guessed.

Migrated Mail Account doesn't work

Last week I used Migration Assistant to move everything from a 10.5 MBPro to a shiny new 10.6 MBPro. Just about everything is working except one of my email accounts. In its previous incarnation it successfully connected to an Exchange server using POP over SSL. Now it doesn't work. Nothing has changed at the server end - I can still use the same settings to access it from a Windows machine.
Mail doesn't report any errors, so I watched the conversation with Wireshark. The Mac side closes the connection after sending a TLSv1 encryption alert, code 21, which is an encryption error. When I look at the X.509 cert sent by the server, it has, according to Wireshark, the "not before" field set to Aug 6th 2011, and the "not after" field set to Aug 8th 2010. Would this be enough to produce encryption errors? Is the encryption mechanism more sensitive on Snow Leopard than on Leopard?
AK

Update - I was misinterpreting the certificate dates. The "not before" is in fact 11/08/2006, and the "not after" is 10/08/2008, so it is not a date conflict issue, just a completely out-of-date issue (that's August, not October, for those that read their dates differently).
I ran Thunderbird, and it pops a dialog box to ask if it is OK to use the expired cert, and will then successfully retrieve Mail from the server.
Why won't Mail do it?
AK

My AS3 Quiz Widget doesn't work correctly

First of all, yes I have set the project options to export as
"AS3" and yes, the widget is also "AS3", so there should be no
compatibility issues.
I'm a flash programmer for 10 years now and this really
brings me down to my knees whining and screaming...
I programmed a very simple widget which displays a "Yes" and
a "no" button instead of the radio-buttons you're forced to use
otherwise for this type of question.
I started with an AS3-Version which almost worked. The XML
couldn't be received correctly and the result of hitting the right
button didn't seem to have been recognized by the underlying
Captivate movie.
Then I converted it to AS2. (also setting project options to
export as as2). Everything worked immediately as expected.
Then I converted it BACK to AS3 to be sure to have the exact
same program-logic and changed everything according to the AS3
guidlines. Again, this didn't work.
I suspect that the following functions aren't properly
integrated in Captivate 4 yet:
function answeredCorrectly(isSurvey:Boolean):Boolean
This function never gets called from anywhere in the
Captivate movie whenever I click on "send" or anything! But it
really shoud be, because it's the only way to communicate the
result to Captivate.
var myXML:XML = new XML(movieHandle.widgetParams());
This one doesn't get me the Parameter I was expecting. Even
though the setInspector... and getInspector... functions work fine
and I am able to set everything in the inspector window, this one
always returns crap instead of the variables I set before using the
inspector-functions.
I included the whole code which doesn't work.
On the stage is:
btnJa => yes button
btnNein => no button
cbRightAnswer => pulldown for setting the right answer
lblRightAnswer => label for pulldown
dbg => debug window (because otherwise it would be a huge
pain in the *** debugging this)
So if anyone can spot the error, I'd be quite relieved,
because this is driving me nuts.

Yay, got it running!
Sadly, the function that got it running was NOT included in
the quiz-widget Template and I really wonder why, because this will
cause some big frustrations among some users.
I implemented the answers():Array function.
And I wonder why the AS2-version did work flawlessly without
it. And why it isn't included in the AS3 widget as-files. This
could have saved me 3-4 hours of research.

Replied mail widget doesn't work

Similar Messages

Maybe you are looking for