"Reply All" won't send, hangs in Outbox

Motorola Razr M, Android version 4.1.2.
Using the Email app that came with phone, Roadrunner Email, have used both Auto Detect and Manual to enter email settings. However, whenever I "Reply All" within email, the message gets caught in the Outbox and hangs. Troubleshooting - I have already: Deleted and reinstalled the Email Account a half-dozen times; I have restarted phone, turned off and back on, etc... This only occurs with "Reply All", "Reply" works fine.

Anthony,
Yes. I've tested with other email accounts, 2  gmail, Touchdown, and now the Aquamail patch I downloaded for use with  RR. I've also tested Reply All from my desktop using Outlook with the RR  account and it works fine. Additionally, I've tested it with RR using  their webmail site.
While it does work with the  Aqualmail patch/app, I prefer to use the preinstalled email client,  though, so if it can be fixed, I'd certainly be grateful.

Similar Messages

  • Can't reply or reply-all and loose send icon

    This started on 3/11 and is making me crazy When I TRY to reply or reply-all to an email.. the icon will toggle back n forth between "reply or replay-all" bu twon't let me reply, UNLESS I have to save it as a draft, then open up the draft and then I can "send" It's annoying the crap out of me. I tried going to Mail menu, then to "message" then reply, etc and it still won't work unless I save as a draft, etc
    PLEASE HELP!!!!
    karen

    Hi Karen, and a warm welcome to the forums!
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reset Launch Services...
    http://www.thexlab.com/faqs/resetlaunchservices.html
    Reboot.

  • Reply all to exclude sender

    outlook 2013 being used on two computers - one has pop3 and the other is to exchange. Both computers have primary email address set correctly but on doing a reply-all, it includes my email address and I have to manually remove. How do I avoid this?
    Thx

    This issue may happen if one of the following conditions is true:
    1. Wrong Reply E-mail is set under File > Account Settings > Account Settings > More Settings > General tab.
    2. For Exchange account, Outlook is using the x500 address instead of the SMTP address.
    3. You have one or more contacts in Outlook for your own GAL entry and one contains the wrong address. Outlook is resolving to the copy in your Contacts, not the GAL.
    In each of these situations, the From address is different than the account address so Outlook included it in the Reply to all.
    Reference:
    http://www.slipstick.com/problems/reply-to-all-includes-my-address/
    Flynn

  • OSX Mail won't send mail from outbox

    Hi.
    I'm having a problem with Mail not sending messages from my out box. Everytime I compose a new message, it ends up in the outbox. I used the connection doctor and my pop and smtp connection is fine. I tried deleting some of my old email messages. I've repaired permissions, ran Diskwarrior even move my old email from a holding folder, deleting the old mail account, created a new account, transfered the old email back into the new account. It still doesn't send email from the out box. I know my pref settings are correct because I also have a G-4 desktop running the same OS and it sends mail just fine. I'm stumped.
    Any info will be of great help.

    If no error message is provided, the Outbox mailbox may have some corruption.
    With the Mail.app quit and using the Finder, go to Home > Library > Mail > Mailboxes > Outbox.mbox.
    The Outbox.mbox folder represents Out in the mailboxes drawer which appears only when a message cannot be sent and is shared by all accounts.
    Delete the Outbox.mbox folder and empty the Trash. This will delete any messages contained in the Outbox mailbox so before doing so, you need to move any messages contained in the Outbox mailbox to the account's Drafts mailbox.
    Launch Mail and a new Outbox.mbox folder will be created automatically by Mail within the Mailboxes folder.

  • Mail won't send because of OutBox or inport inbox

    Just got a MacBook Pro. Very Happy with it thus far but seem to be having trouble with Mail. I went through the set up, pointed it to my former Inbox but It didn't import my inbox. I tried to do it again and it just spun all night trying to import the inbox before crashing. I got the settings set so I can recieve mail but sending mail gives the error message "The message could not be appended to the Outbox."
    what gives?

    Many ISPs don't allow you to use their outgoing Mail server unless you are actually connected to them, for security reasons. You could open a Google Mail account and send using their server - this can be done from anywhere since it is password-authorised.

  • Mail Won't Send --Stays in Outbox

    My mail won't leave my outbox. What do I do?
    I have mac mail by the way.
    PowerBook G4   Mac OS X (10.4.8)  

    Do you mean you have .Mac or do you mean you use Apple's Mail application?
    And has it ever worked for you or is this a new problem?
    Regards,
    Steve M.

  • MAIL WILL REPLY, BUT WON'T SEND FRESH EMAILS FROM ADDRESS BOOK

    HI, Recently set up my pop3 account on mail. And hit a problem. Mail will receive emails, will send "REPLYS" but will not send fresh emails from address book or even if i type them in manually.
    This is so stupid.
    Help guys, Thanks
    Liam

    You should set it to Port 465, and select SSL, assuming this is the smtp.gmail.com server. Your ISP is probably blocking use of such a SMTP on Port 25, and that is very common policy.
    Ernie
    Message was edited by: Ernie Stamper

  • Outlook 2010 won't send msgs w/links

    I have Outlook 2010 and I use Yahoo mail as my relay.  Recently, any message initiated from Outlook 2010 which contains a web link won't send (stays in outbox). I have disabled all anti-virus software. I tried changing it to plain text - so that it
    shouldn't even recognize it as a link. I've tried removing the hyperlink. Nothing so far has worked.  Has anyone else experienced this?

    Hi Friend,
    Open MS-Outlook in safe mode and then try to send emails. There can be lot of reasons behind such issue if your emails are going into Outlook instead of sending.
    Common causes of such disturbance are:
    Offline Mode (enable it or work with Online Mode)
    Send/Receive Settings (Change manually to Automatically)
    Wrong password (sync web based mail password with Outlook)
    Corrupted Outlook Data File (use scanpst.exe to repair and then try to send emails)
    Antivirus scanning programs (disable these programs)
    For more:
    http://support.microsoft.com/kb/2663435
    Note: Improve community discussions by marking the answers helpful.
    Thanks
    Clark Kent

  • I'm using ipad2 with ios5. My outbox won't send mail. I guess i need an outgoing server and can't find it anywhere.

    I'm using ipad2 with ios5. My outbox won't send mail. I guess i need an outgoing server and can't find it anywhere. Any suggestions on how to get it to send. I have tried everything, rebooting, ensuring passwords are correct, etc.

    My problem is i don't have an outgoing server spot on my menu.  These are my selections. After getting to the menu that where i enter my password for hotmail, i have the following menu choices:  Email, then server (bay-m.hotmail.com, then domain (empty), then username, then password, thendescription, then Use SSL, then S/MIME
    I don't see or can find an outgoing server choice. My daughter has an ipad2 using Ios4 and she has all the choices that are illustrated on. All the help sites. I only have the ones listed above.

  • Outbox won't send mail

    Had a problem earlier with my email account (Yahoo) being hacked, After resetting password all seemed to be well, but now my iPad won't send mail, it goes into OUTBOX but won't send. Receiving mail is no problem.
    I am new to iPad and need a bit of help.
    Thanks
    John

    Brilliant! Thanks Jaimi E.
    My iPad did resume 'normal service' after an overnight rest. I did not know that there was an imposed 24hr quarantine, but I do know that all's well now.
    I found The BT staff in their technical help desk were good at fixing the original hacking problem on my laptop, but totally helpless at sorting the iPad issues out.
    I had to talk to Apple help desk in UK who in turn put me through to the USA. Their consultant was great, but he undoubtedly didn't seem to aware of the quarantine imposed by Yahoo. I will try to get this information through to him for future information
    Thanks to all for your assistance.
    My message to anyone who reads this topic and has been hacked on Yahoo (or btinternet) is
    1 update security passwords on laptop. New password required. Delete all traces of hacked messages (inc failed delivery notices and real people's responses)
    2 uninstall your mail settings on iPad and reinstall with new mail password on iPad.
    3 the iPad mail system should then receive, but not send mail (goes into Outbox)
    4 wait 24 hours then everything will be back to normal.
    As a brand new user and about to go on a long holiday, it was a nightmare, but ended up fine!
    Now in Singapore at 6am local time, can't sleep so catching up on my machine which functions perfectly!

  • Mail App won't let me reply/reply all to messages

    Hi folks,
    Unfortunalty, I have a problem on my hands. My Mail application won't let me "Reply" or "Reply all" to certain messages. I noticed so far that I cannot reply to messages from the GMail domain. If I click on "Reply" or "Reply All", the buttons toggle like they have been clicked, but nothing happens. When I look in the Console application, I see the following entry every time I hit those two buttons:
    2006-09-10 16:28:54.794 Mail[1654] * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
    Now, I also cannot attach anything to any message. This is a consistent problem that is a real pain! If I want to send an attachment, I have to go to the webmail portal and use that to send messages with attachements. When I click on the paperclip icon in the toolbar, I see this message in the Console application:
    2006-09-10 16:51:13.154 Mail[1654] Exception raised during posting of notification. Ignored. exception: * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
    What does this mean and what can I do to correct this issue? Thanks in advance!
    Jaime Rios
    PowerBook G4   Mac OS X (10.4.7)  

    Hola Jaime.
    This problem in Mail is usually caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
    Resetting Launch Services
    If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
    Resolving Disk, Permission, and Cache Corruption
    It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
    Side effects of System cache cleaning
    As an example, this is how you should proceed with OnyX:
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Click Maintenance. In the Reset section, check LaunchServices database.
    4. You may uncheck any other pre-checked options if you wish.
    5. Click the Execute button.
    6. Restart the computer.

  • MAIL reply all to large message- "Cannot send message" how to get this to go away

    I replied all to a large message and got the notification "cannot send message..." I usually press cancel or try again, but since the message was so large, I don't have access to either buttons.  It won't allow me to scroll down and maximizing the message does not help. I have tried force quit and shutting down my computer, but everytime I reopen mail, the message pops up. PLEASE HELP!!!!

    Mail: Mail unexpectedly quits when viewing certain messages

  • Iphone won't send or reply to emails

    iphone (iOS 7.0.4) can receive, but can't send email (either new or a reply)
    Message: "Unable to send ... Copy placed in outbox ... sender address .... rejected by server".
    No problem on iPad (iOS 7.0.4).
    Have tried switching off iPhone, deleted email accounts, reinstalled etc.
    Anyone else had this?
    [This corrects my first ever post (whcih had a mistake in) earlier]

    Double-check your outgoing server settings. Find out from your email provider what might be causing that error.

  • N Mail, when using "reply all" why does Mail automatically include my email address in the cc line? Whey would I want to include my email address in an email I am sending.  Anybody have any idea how to stop this?

    In Mail, when using "reply all" why does Mail automatically include my email address in the cc line? Whey would I want to include my email address in an email I am sending.? Anybody have any idea how to stop Mail from including my email address in the cc line when using "reply all"?

    Automatically cc myself is not checked.  I did find out that if you have multiple email address that all of them need to be associated with "My Contact" tab.  Thanks

  • Reinstalled 10.6.3 and now several days later the mail buttons 'send' 'reply' 'reply all' are frozen

    reinstalled 10.6.3 and now several days later the mail buttons 'send' 'reply' 'reply all' are frozen (not greyed out, just completely unresponsive).  also every other keystroke or so in the body of the email returns an alert bleep (but the charactor seems to be entered without a problem).  i can recieve mail and all the "connection status" checks in Mail Connection Doctor return posative connections.  so far i tried removing the com.apple.mail.plist permissions from my library and then repairing permissions with disk utility, as well as running applejack.  no luck.  any suggestions?

    Hmmm, interesting problem & not on 10.6 at the moment, but quit Mail & in the Finder go to...
    Users/YourUserName/Library/Mail
    Do a Get Info & see if it's locked or what rights are there.

Maybe you are looking for

  • Upgrade from 10.1.3 to 10.1.3.1

    J dev install depens on copying files. We made many configurtion change to JDEv 10.1.3 Also We have installed a lot of extention to 10.1.3.1. We want to protect our own configuration. How can we do it when upgrading. In my opinion Upgrade process nee

  • Transfer data to MBPro fr old MB

    My new MacBook Pro arrived and I need to transfer over the data, settings, files, users, etc from a 2008 MacBook. I cleaned up my old files and organization, then turned on the new MBP to charge it up. I was prompted by the Migration Assistant, linke

  • Bootcamp (windows compatability with programs pre-installed to mac)

    Hi, i've recently got a macbook pro on a grant for university. i have today purchased and uploaded the windows 7 programme on bootcamp. the only problem is that on windows it now appears that i have no access to programs which are installed on the ma

  • Websites are not opening

    I made some adjustments to Adobe settings and now some of my websites are not opening? Not sure if it's related but...

  • Tab Control/Display Data

    Hello All, I have an issue with displaying large amounts of data. What my program does is calculate INL/DNL errors on analog to digital converters, when the program runs it generates 3 graphs and a couple of numbers. The idea is to be able to run the