Reply and send button look active, but do nothing, Safari also troubled
I do not get any errors that I can't send, Connection doc. indicates all connections are good. Emails just sit in the draft box. Also, when typing, my space bar forwards me to the bottom of the email field in Mac Mail, or the bottom of the web page in Safari. Additonally, the cursor doesn't move when using the space bar, but the space is there. When I start typing after this, sometimes my typing is backwards, it actually starts typing right to left, this also happens in Safari, but not always. The delete key sometimes highlights the text, and then, in Safari only, the program quits.
I had issues long ago with the version of MS office (2003) and OSX 10.3, but I don't remember what resolved this, I think it had somethng to do with a plist. This only happens to my main log in. Other log ins seem to be fine.
Hi labw, and a warm welcome to the forums!
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
Similar Messages
-
I am the administrator of the PC and logged on as such. Do not have a master password set up for Firefox security.
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
I've lost the "Send" button in my reply window. When I double click on a Mail message, on order to reply, the "Send" button at the top of the window is missing. I can reply by closing and saving my reply, and re-openning from Drafts. How to fix?
Hi, try this...
If nothing is showing in the Toolbar at top, click the little gray oval at top right.
Right click or Control+click on the Toolbar, choose Customize Toolbar, drag the Send button to the Toolbar. -
i can recieve text messeges and when i try to reply the send button and place to write text is non useable
Go to Settings>Messages>Show Subject Field and make sure it's set to Off.
-
MSS form Check and Send button
Hi All
I am working on a MSS form object which changes the last name of an employee. The form has basically two fields - Current Last Name and New Last Name. Current Last Name is READ ONLY field whereas New Last name is user entered one. Problem is when I am trying to execute from backend (Executing via HRASR_DT), I am able to change the last names of any PERNR. However, in the portal, I am able to see the form, enter new last name, but when clicked on "Check and Send" button at the bottom of the form, the form goes in some infinite loop..it doesnt show me the "SEND" button at all..it shows me waiting symbol and finally I have to close the browser to relogin again..Did anyone of you faced similar issue? How to avoid it?
THanks
ShakirThis occurs due to number of reasons, check below blog on how to resolve it.
[HCM Processes & Forms: You spin me right round, Baby, right round, like a record, Baby, right round, round-round|/people/christopher.solomon/blog/2009/06/18/hcm-processes-forms-you-spin-me-right-round-baby-right-round-like-a-record-baby-right-round-round-round]
Chintan -
My IPad screen is grey even after I tried pressing the sleep and home button for reboot but turns out it stays grey.
You can try to reboot a few more times. If it doesn't come back and you normally sync to a computer, hook it up and see if the 'guts' are working even if the screen isn't.
Beyond that you should make an appointment at your local apple store and have them check it out. -
My wife, daughter and I have iPhones with iMessage and Send Read Receipts activated. All the messages sent between the three of us are blue however, when my wife messages me, the message appears in green on her iPhone. Can anyone explain why.
Because some kind of error occured. This is only from her iPhone to your iPhone? Whenever she sends a message to any other iPhone, it is sent as blue? And when anyone else sends you a message from an iPhone, it sends as blue?
-
Hello
I have an I mac with Yosemite operating system.
I installed a windows seven 64 bit on it.
also i have a parallels desk top with version 10.
if i run my windows without parallels my windows and my office is activated ,but if i run my parallels then my windows and my office can not be activated .
My problem is activating my windows and office through parallels desktop .
i had installed windows an parallel desktop several times ,also i installed several times parallel tools with menu bar in parallels desk top and when i am installing parallels desktop tools in any way i can see the (CTRL+ALT )
all of my application in windows works properly through parallels desktop except
activation of office and windows .
I do not no any solution for my problem , i need for helps .thanksIt is not W10, it is the Technical Preview version of W10.
Search on the Windows forums (fora for the latinist) for activation in the TP W10. -
iTunes is telling me that my iP4 may be damaged and can't be activated, but I was using it when it turned itself off, so how can it be damaged? I even managed to download photo's from it whilst it was turned off, so there was clearly some functionality before I restored it. Is anyone aware of any problems with the Apple's servers currently?
Things fail sometimes.
Was it jailbroken or "unlocked"? -
The App store accepts my Mountain Lion purchase and sends me a receipt, but the download never happens and is "waiting"...
Hi Why not just buy an iTunes card until your problem is sorted In uk they are £15.00 / £25.00/£50.00 Just enter readeem code into iTunes. Cheers Brian
-
My iTunes won't update on my computer. I have windows vista. I can open up itunes and when I click on "check for updates" it asks if I want to download iTunes version 11.1.5 and I click "Download iTunes" but then nothing happens. Sometimes uptop the loading bar will appear but for only a split second. I have tried restarting, shutting down, I cannot figure out why it won't download. What's happening and how do I fix it?
Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue
Connect to iTunes and try to reset it from there.
-
After upgrading to the latest editon iTunes, the text associated with syncing any device is gone. The buttons are there but no text. Also the toolbar for iTunes has disappeared.
That's consistent with trouble with the Segoe UI fonts on your system.
If you're using Windows XP or Windows Vista, try Vortical's technique from the following post:
Re: iTunes 10.1 Missing Text
But if you're using Windows 7, try itunesTRK's suggestion from the following post:
menu bar invisible -
I have a new hp tower running windows 8.1 and have been trying to install the adobe reader. The installer downloads (1meg) and I choose to run it but it just sits with an empty screen. I've checked task manager and it takes up memory but does nothing. After letting it run for 3-4 minutes I kill the task. What can I do to get the reader installed on this machine? I've tried using chrome, firefox and explorer and get the same results with each.
Try the offline installer from http://get.adobe.com/reader/enterprise/
-
I have downloaded I-Cloud and the new ios program. Where do my text go through now if they don't show up on my bill in the data usage section? When I get a text from friends sometime their e-mail address shows at the top of the message instead of their name like it use to. Then when I reply it gets returned. They tell me they are sending it through the normal text like they use to.
You are probably right - I don't have my iPad with me and was confusing myself. But on the iPad it is receive at email addresses only.
Sending to the phone number will mean ONLY your iPhone gets the message. If you want it to go to ALL devices, then you should have them send to the email address associated with the AppleID you used to set up iMessage originally. Also set that email address up as your caller id on the iPhone so as you send out messages, people will reply to that and both your devices should get them.
Although Apple's notes indicate you should be able to do it - http://support.apple.com/kb/TS2755
what if you just type in a 10-digit phone number on the iPad instead of an email?
(I originally did all this with iOS 5.0, and I know then the number did not work on an iPad, but maybe with iOS 5 updates, it does now?)
Maybe you are looking for
-
How can I create RAID 1 on Mac mini server just now from box.
I bought my Mac mini server two days ago and decided that 1Tb + 1Tb HDD are very good for RAID 1 (mirroring). Thinking - doing ... Open Disk Utility, try to change and create RAID. Nothing. Try to reinstall OS X - recovery part are on disk all time.
-
Hi, im trying to use NumberFormat to format a double variable. How do i know if i need to use the "import java.someclass" statement or not? thanks for reading.
-
Hey all found out my problem with my ipod it said its corrupted when i finally got my computer to see it. but it will not format it says there is a error can not format. Does anyone know how I can get it to format or where I need to send it to get it
-
Source System Mapping between BW Dev and Prod system
Hi, I have a DB Connect Source System in BW Dev system called DBSRCDEV which points to one of our Oracle Dev DB. In Production, the DB Connect Source System is called DBSRCPROD and it points to the corresponding Oracle Prod DB. In Development, I crea
-
Hi, How can I get "Distinct" rows from CRM Server using Bdoc? As we use in sql server, select distinct empid from employee... Thanks Mateen