Reply ONLY to sender and not ALL in text MMS
I'm sure this answer is somewhere, but apparently I am the world's worst searcher on here, Crackberry and any other "help" forum I can find.
I received an MMS from a friend who included a picture of his newborn. He sent the text to multiple people. How do I reply to just him instead of having to reply to everyone?
Let me tell you what I've experienced with my son and mother in law how both use iCrap.
They create a multi-user SMS chat. And whatever happens, you're tied in to for good no matter who replies and how long, until you delete that chat.
And even then, if one of the OTHER persons replies later, and you're still IN that same chat ON their iPhone, you're back in it again and from what I have experienced, the only way to again have a one on one SMS chat with one of those people is to delete that iPhone created chat.
In short, it's not a BlackBerry problem, you're being sucked in the chat by the iPhone.
My friends or I have created similar on the BlackBerry, and it doesn't appear to suck you in permamently.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
I have read and tried the solutions posted under these links, but it is not solving the issue.
http://support.mozilla.com/en-US/kb/make-firefox-remember-usernames-and-passwords?s=how+to+save+password&r=1&as=s#w_make-firefox-remember-usernames-and-passwords
http://support.mozilla.com/en-US/kb/Username%20and%20password%20not%20rememberedMake sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect (Fx 8): [ ] "Always use private browsing mode"
*Deselect (Fx 3): [ ] "Automatically start Firefox in a private browsing session" -
Why don't all my contacts and calendar events on my iMac (version 10.7.4) stream onto iCloud? For instance, there are 470 entries in my address book but only 270 on iCloud. And not all my appointments in iCal are transferred either.
I have the same problem transfering Address book on iMac to contacts on iPhone (old version 3G - on iCloud). this is a hard wired connectionMight you have 200 entries in On My Mac groups and some of your appointments in On My Mac calendars?
-
How do I only show my inbox on email and not all the support folders
How do I only show my inbox on email and not all the support folders
There is a third-party program called Attachment Tamer that will do that for you. In the Terminal, you can type this:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
Also note that while Attachment Tamer does some things with the encoding that makes certain email clients display the item as an attachment, what shows up at the receiver's end is solely dependent on their email client and its settings. -
How to put SELECTED videos in one place, so I can ONLY show the SELECTED videos on my TV and not ALL of the videos I have ever taken
YYou have to describe your issue in more detail. Are you using iTunes? Trying to see it in Apple TV, etc, etc.
-
Why do only some photos appear in iCloud folder on my PC and not all taken on iPhone appear on iPad either? All settings seem correct and new photos now seem to be appearing on all devices, but not all older or recent photos, even if taken at same time. All advice greatly appreciated.
First, to access documents you must use an app designed for that specific Document type. So Pages will not be able to open PDFs. The Documents app by Readdle can handle PDFs though. In the latter case, you'd open the app, click the menu icon at its top left, and click Open to go to your iCloud Drive. With Pages, if you had files outside the main Pages folder, click + then iCloud and navigate to the file's location.
Matt -
How do I transfer ALL my photos from iphone to photo stream? I have just turned on my photo stream on my PC and it only copied some photos and not all of them.
Photo Stream will only transfer photos taken in the last thirty days.
Connect your iPhone to your PC and transfer the photos manually.
See here:
http://support.apple.com/kb/HT4083 -
I preordered an album and i only got some songs not all, what happened
i preordered an album and i only got some songs not all, what happened??
What do you mean 'only got some songs not all' ?
Has the album now been released ? If it is has and you've paid for it (you aren't charged when you pre-order an item, only when it's released) then you should be able to download the complete e.g. via the Purchased tab in the iTunes store app on your phone, or the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes. -
How do I export pictures from my IMac to my iPad. I have only certain albums I want to export and not all my albums?
You can select only the albums that you want to sync in the photos tab of iTunes when you sync your iPad. If you are using iPhoto it is very easy. Simply select iPhoto in the Sync Photos From heading and then select the albums that you want to sync.
If you are using iTunes 11 - enable the side bar by going to View>Show Sidebar from the iTunes Menu. This explains how to sync photos.
iOS and iPod: Syncing photos using iTunes - Apple - Support -
Need to use only one sender and receiver communication channel.
Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 ---> E://dir1/File1
F://dir2/file2 ----> G://dir2/file2
H://dir3/file3-----> I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit RameshHi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki -
How can I close 'current' window and not all windows?
How can I close the current window (only) and not all or none?
This function works well with MS Explorer.
Not a problem, just a desired function.Hi JLCluster,
If you just click the small x in the tab you are currently viewing, it will close only that tab. I think you are clicking the x in upper right hand corner of the screen which closes all open tabs as you described.
Hopefully this helps! -
In that process I lost my LR4 catalogs I was able to redownload the program but the catalogs are not there and not all of those pictures are on my external hard drive because same said teen decided they were going to borrow my external hard drive without telling me and "made room" on it. Is there a way to recover my catalogs? Please tell me there is because I was in the middle of working on a session when I had to wipe my drive and I would REALLY like to not have to go back and reshoot it. Any help would be wonderful!
It depends on how you wiped your drive. Depending on how you did it, only the directory was erased and the data can be found with drive recovery software. Some are free, although there is a small charge for most of them (~$30). You can usually download a trial version that shows if it will work and you have to pay to be able to save the found files. Use Google to search for the software. Different programs work differently and can find different things.
Good luck.
John -
Reprice at time of billing - only certain condition types not all of them
Hi,
My client has a requirement to reprice certain condition types at time of billing. Is there a way to reprice certain conditions at time of billing document creation and leave other conditions as they are copeid over from the sales document?
It doesn't matter if a User Exit is used, routine, etc.
Thanks
ChrisHi,
It is not possible to reprice only specific condition types and not all the conditiontypes. We have a pricing type to redetermine the tax conditiontypes. But it is difficult to reprice the c.types of our choice.
However through user exits, it should be possible. If you discuss with ur developer, he can help you. Also you can look at the possibility of creating a new pricing type (again withthe help of developer). I think it is not possible, but give it a try,may be the developers will find a way to dothis. -
Can't find last import from iPhone!
Noticed as I imported I had that view where there was only one project symbol, not all my projects showing by date, but even so pictures were imported. It took the time to do them, so where aare they? I have closed and restarted to get back fll view of all dated projects, but nothing can be found from today...have i posted it right...?? no response from apple guys...
-
Connect only in Bn and not in Gn
Hello
I have a Controller 5508, CAP 3501E
I have a problem, all client who connect in 802.11n connect only in Bn and not in Gn.
When I diseable the n, the same client connect in 802.11g.
Could you help me that the client can connect in Gn
Thank you
christopheHello
I test this
Go to Wireless > 802.11 b/g > Network.
Disable all data rates 12 Mbps and below. Make 18 as Supported and 24 as Mandatory.
but not good result
the controller version is
Maybe you are looking for
-
Unable to log-in in Oracle Identity Manager Design Console
Hello, I successfully installed OIM9.1.0.1 Identity Manager on Jboss4.2.3.GA App server and could login to OIM using http://llocalhost:8080/xlWebApp on my window Server 2003 system without any problem. Then I installed the Design Console on my window
-
Hi All, I am trying to combine a subquery in where clause but could not get it to work. Does anyone have better idea how can i achieve this? > select l.olic_id, l.olic_key, o.trading_name , p.name, l.olic_term, l.expire_date, l.status from table1 l,
-
Is it possible to stop iTunes from generating a separate cover for each artist when the album has multiple artists?
-
How to change information text at logon screen on IDES ERP 2005?
I have attached picture where I want to change was inside the red rectangle. Thank you. http://www.temppic.com/img.php?07-03-2008:1204880865_0.29363400.jpg Edited by: jitpanu sriudomwat on Mar 7, 2008 10:12 AM
-
User unable to umount samba share
Here is the lines in my /etc/fstab related to samba shares. # Some Windows/SAMBA shares //BAO-QNAP500GB/USB\040Disk\0401 /mnt/eBooks smbfs workgroup=BAO-HOME,username=xxxxxx,ip=192.168.2.4,password=xxxxxx,noauto,noatime,user,rw 0 0 I am able to mount