Reply, Reply to All or Forward not working in Mail
Today, suddenly, my Mail does not allow me to engage the reply, Reply to All or Forward. I have to Force Quit to get out the application. Any suggestions?
Brenden, thank you for you response. The article did not help, so I did a full restore from Time Machine, going back to three days before the trouble began. When it finished restoring a Yosemite Mail update appeared, and between the two my problem was resolved. (Strangely, the Time Machine restore seems to have reversed my Mac login -- where normally I would hear a tone, enter my password and then a ribbon would fill before loading my desktop I now have no tone, the ribbon, the password fill-in and the load. Strange, but everything appears OK otherwise.
Similar Messages
-
Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email to the same recepient. What is happening?
I talked with a tech today and he said I cloud is having problems which should be resolved shortly.
In the mean time I used the .me smtp server settings which allowed me to send mail. -
RV215W router port forwarding not working
RV215W router port forwarding not working.
Port forwarding works for a short period of time, then stops working. Reboot router, works again for short period of time, then stops again.
I have updated firmware to latest. I had seen other similar bugs posted for 220 and I think 180, not sure if this router has similar bugs and waiting for fix release to firmware.
I had recently purchased two, one deployed, will hold off on other now because of issues, and may have to move to different unit if a resolution not found this week.
Dave Gritten
IT Director
Maritime Beauty
3695 Barrington St
Halifax NS B3K 2Y3
cell 902.223.9685
phone 902.429.8510 ext231
fax 902.422.7983
[email protected]
www.MaritimeBeauty.comIt's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! <--That would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues. That would take several hours. I told him I would have appreciated if Cisco would have debugged the issues with their router BEFORE they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.
-
Hairpin forwarding not working with CCME 4 and SIP
We are a VoIP provider and we're trying to install Cisco Unified CME 4.0 for a customer. IOS is 12.4(4)XC1 on a 2811. The customer will use our SIP service as his only outgoing trunk (no on-board ISDN or FXS cards).
On our SIP service we don't support call transfer or forwarding using the "302 Temporarily Moved" SIP method, for billing reasons. The customer needs to to hairpin routing and actually have the call go entirely through his equipment.
Following instructions, we tried enabling hairpin routing by issuing the following commands:
voice service voip
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12
dial-peer voice 9000 voip
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12
Despite all this, when an ephone-dn has call forwarding enabled to an external SIP number, and a call comes in through the SIP trunk, our SIP server gets a "302 moved temporarily" message. It rejects this message and the call fails.
We even tried loopback-dn routing but we still get the same result.
Is there a way to force CCME to route the call through its inside even if it's coming and going from/to the same SIP trunk?
Thank you
-ManuelJust an update: Davey's post was very helpful as it solved our "call forwarding not working" problem. The solution was to add the "service session" command to my voip dial peers. CME now hairpins forwarded calls correctly.
What still doesn't work at all is call transfer. If I receive an external SIP call and want to transfer it to another external SIP number, I just get the "unable to transfer call" error message on the phone, and both calls are just placed on hold. So it's not a permission problem - the call can be dialled correctly. But when hitting "transfer" the second time, CME doesn't "know" how to join them together (ie. hairpinning).
Cisco TAC's replies so far have been quite strange. I've been told that CME does not support hairpinning and that this is still being developed - apparently not, because call forwarding *does* work now. I'm only missing call transfer, then I'm all set :-)
Thank you
-Manuel -
My update all button will not work in the app store. It keeps giving me a crazy message about not having enough storage to update apps. Please help? I know i have storgage on icloud and on the phone itself. Any ideas? Thanks
Try deleting the old backup.
Settings>iCloud>Storage & Backup>Manage Storage, tap the device name and on the resulting screen, scroll down and tap on Delete Backup. -
XMLP 5.6.2 - Parameters - Both Multi-Select and All-Select Do Not Work
Both Multi-Select and All-Select Do Not Work.
What's up with this behavior?
And when might it be fixed?
BG...The Multi-Select is now working, not sure what I did wrong earlier. However the "Can select all" option when building the parameter does not work as advertised, though I was able to get around that as well.
Create a Data Model
select LAST_NAME, FIRST_NAME from SOME_TABLE where SOME_COLUMN =:SOME_VALUE
OR
select LAST_NAME, FIRST_NAME from SOME_TABLE where SOME_COLUMN in (:SOME_VALUE)
Create a LOV
Name = LOV_SOME_COLUMN
Type = SQL Query
select distinct SOME_TABLE.SOME_COLUMN as SOME_COLUMN from SCHEMA.TABLE
Create a Parameter
Identifier = PARM_SOME_COLUMN
Data Type = String
Default Value = NULL
Parameter Type = Menu
Display Label = LOV_SOME_COLUMN
List Of Value = LOV_SOME_COLUMN
Option
Multiple Selection - Checked
Can select all - Checked
Refresh other parameters on change - Checked
Then test your report. Select "All" from the LOV and click view. Result - No Rows Returned.
Selecting a "Single" or "Multiple Values" values from the LOV does work.
The way I am getting around the problem is to uncheck the "Can select all" and then manually select all the values in the LOV in order to get the "All".
BG... -
Why in my Layout section the All floating section not work in Abobe Elements 12?
I have Adobe Elements 12, and I'm having trouble in the Layout section at the bottom of the screen.
Within the Layout section I can use all the layouts except the All floating.
When I first used Elements 12 this was working but all of a sudden it stop working.
What can I do to solve this.
Thank you,
Albert F Schwartz Jr
Email - [email protected]already answered
Why in my Layout section the All floating section not work in Abobe Elements 12? -
After installing Lion all Adobe products not working will and to slow
After installing Lion all Adobe products not working will and to slow
Like the photoshop is to slow to work on it
Please I need to now what's the problem and how can I solve it
Best regardsYeah Im at a loss too for what is going On here I Do Audio video Editing On the PC side till Now Just got a Not even 6 mo old Mac book pro Dual core 2.5 Ghz 17 in 160 Gb HD 2 GB Ramm did fresh reinstalled of tiger Patched to 10.4.11 then asked the tech at apple store best way to go for Installing my Adobe CS3.3 Master Suite for windows on Here As I said I did not want to go with Lepord as well as I do not use vista yet on PC side with my audio video Apps Abelton live 7.0 Reason 4 Pro tools 7.4 M powered Avid media Composer 3.0 and everything Adobe Makes now he says 2 ways to go VM fusion Or Parallels He likes the Parallels I go that route I install it realize to make Adobe suite work I have too do a custom Virtual machine with 1.5 GB ramm instead of default 512 MB and I create virtual HD at 60 GB instead of default 32 GB which The first time i Installed the master Collection at the 32 GB setting I think it ran out of disk space on the install so i increased the VM to the current settings went to Adobe to Parallels site and Got updates and windows and apple removal tools and ran them here goes reinstall # 3 it takes about 1 1/2 Hrs then at end give ya the error 19-20 errors and when you go look into the folders in Program files adobe there are no Icon launch files and in your programs tab under adobe suite all you see is 2 icons that do not launch anything ? any help is greatly appreciated new to Macs Like them but a lil discouraged !!!!
-
MSI GAMING 5 - ALL USB ports not working
hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank youQuote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D -
I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
RajeshSee this discussion...
https://discussions.apple.com/message/23731048#23731048 -
All my movies not working anymore since download the new version OS X 10.9.4
all my movies not working anymore since download the new version OS X 10.9.4
Hi Jeff,
In Safari I get this error message: Safari can't open "aam://SAP...[link of the download]" because OS X doesn't recognize internet address starting with "aam:". I thought it was a browser issue (I can't click the download button in Chrome) so downloaded FireFox but it also gives me an error message saying: Firefox doesn't know how to open this address because one of the following protocols (aam) isn't connected to any program or allowed in this context.
I don't have Creative Cloud Membership, I received a CD with Photoshop Lightroom 5 with my new camera from Samsung. Because my MacBook Air doesn't have a DVD drive I figured I should download it. Couldn't find Lightroom 5 in the Appstore so I figured I should download a trial version and simply add the key from the DVD. Unfortunately I can't even download the trial version due to these error messages.
Hope you can help!
Thanks,
Ivana -
Keyboard not working with Mail
I have a new iMac aluminum, and everything was working ok for a week or so. Then the keyboard Update popped up, so I downloaded it. Seemed ok for a day (maybe just until I shut off the machine, though.)
Now, most programs are fine, but within Mail, the Reply and Reply All buttons do not work. If I start up a new message, I can type just fine up until the first space. After the first press of the spacebar, all I get are alert sounds for every key pressed.
Also, cannot send any message (Send button and shortcut not working.)
Help! And thanks!
Message was edited by: ZincoThis problem in Mail is usually caused by some Launch Services cache or preferences corruption that affects the built-in spell checker. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer. -
Add to Address Book not working in mail.app
On all my computers : MacBook Air and Mac Mini, the Add to Address Book (command + Shift + Y) is not working in Mail.app.
It doesn't add the email and name in the Address Book (now called Contact).
Is this a broken link ?
Best. StGHey Saint-Georges -
I've got the same issue in the console. I didn't notice the keyboard shortcut not working but that's happening to me as well.
I've gone gone through and repaired the disk and disk permissions. Still no luck.
Hopefully someone has a fix.
Rob
From the Console:
6/3/13 5:27:53.922 PM assistantd[4667]: <Error>: Daemon - Sync chunk denied! Canceling sync. [SASyncChunkDenied
aceId: "26234165-b039-4219-af4d-8f4fa5561ebd"
properties:
callbacks: <empty array>
errorCode: 0
group: "com.apple.ace.sync"
refId: "3274A842-6638-4E54-AFB3-F669BCCED462"
v: "1.2"
class: "ChunkDenied"] -
Sound alerts not working in Mail and Ichat apps since upgrade to 10.4.9
I just noticed my Sound alets not working in Mail and Ichat apps since upgrade to 10.4.9.
I'm using soundsticks which is playing sounds thru quicktime, itunes, etc but my alert sounds for getting new emails and IM messages is not working. I get the quick "white flash" on the screen instead. I checked the prefs on both apps and it is set to give me the alert sound, I can even test it in the ichat pref when I change the new message alert sound it will play it thru my speakers but when I get a new message in either app it just gives me the white flash.
I'm read that it can be an issue of not having the balance in the system sound pref set the middle, so I checked that, restarted, all that but still no luck.
I really like the sound alert features because I can be in another part of my house, turn the sound way up and I'll know when one of my clients is trying to reach me but now I can't do that.
Any ideas?
Thanks in advance!
Brown.RecluseOk, weird, strange...did ONE more restart and now its working fine...who knows?
Me -
Hyper links do not work in mail
Hi All, Since updating OSX Hyper links do not work in .mail. I can find no preferences that would affect this.
Hyperlinks in mail not working
Mail links do not open in Safari automatically
Maybe you are looking for
-
Lack of information in JMS based notification message
Hello, I have configured Watch for server log and related JMS Message Notification. However, I get only a text like "MapMessage[ID:<589306.1276727319522.0>]" in the JMS message text. How can I get the original log message by that ID or the JMS messag
-
I got my magsafe 2 60w is it safe to charge macbook pro retina 15 pouces
I get my magsafe 2 60w is it safe to charge macbook pro retina 15 pouces
-
How can I get the settings to my cd bur
I have a Sony DVD burner and it seem that the program don't see it. Can I go in file like .ini to dedicate the dvd path I do need help on this, I install other software and I never had this problem with them. Thank Yvon
-
I realize that this is an old version BUT I have been using it for a long time. I am getting a new pc with windows vista on it. Will my version of photoshop still work? Yes I do mean Photoshop 4.0...now cs4 and such. Thanks in advance jhpb
-
My daughter accidentally dropped a small magnet onto the closed lid of her Powerbook; since then, it won't properly startup. I've tried reloading OS-X and it crashes/fails at the final part of the installation process. Any suggestions before I send i