Reply to email populating the to: field with users own address!

Hello
I have one user who is having an issue with replying to emails.
When he replies, his own email address is automatically inserted into the To: field.
The user doesn't want to send himself a message each time while replying.
Is there a setting that the user may heve enabled, or any other advice on the isue would be appreciated.
Thanks
D

It's synced with Exchange, everythings working ok, just this little issue...

Similar Messages

Populated the new field with historic data

HI,
I have a data for 2 years now I am enhancing the data source how can I populated the new field with historic data.Is it by
1)deleting all the data in BW side and the doing an init then setting up a regular delta
2)running a repair full request with selection condition.
or is there any other option available? which is the best scenario to load these historic data?
Regards,
Ravi

Hi,
I think your datasource is already in production, and you want to data only from today onwards for enhanced fields, i.e. historical data is not required for enhanced fields..
1.Fix ECC down time for 20 to 30 munities
2. Keep all objects on Qty system in ECC and BW.
3.Run Delta laods in BW for 2 to 3 times.So with this step you can clear SMQ1 and RSA7. Check the entries in RSA7, if it is ZERO then it is fine.
4. Move DS from ECC Qty to ECC PROD .
5. Replicate in BW.
6. Move all BW objects from BW Qty to BW Prod.
7. Delete Init load in InfoPackage level (Not in ODS/CUbe).
8.Load Init without DataTransfer.
9.Then Run Delta.
10. Next day on wards deltas will come as usual.
If you need Historical data also.
1.Delete data in Cube.
2.Fix Down Time and load Init then Delta.
Check
SAP Note 328181 - Changes to extraction structures inCustomizing Cockpit
Thanks
Reddy

Search help is populating the input field with wrong data

Hi Guys,
I have created a ZCITY table for which has below 2 field
ZZCITY (Code ) (5 Char) u2013 Key field
ZZNAME (City Name ) (40 Character)
I have added a custom field ZZCITY & ZZNAME in CI_CATSDB. Funtional guy has configured to make ZZNAME as VISIBLE and ZZCITY is HIDDEN on CAT2 screen in Data Entry area.
I created search help on table ZCITY with export parameters as ZZCITY and ZZNAME.
In SE11, I have mapped the export parameters with CI_CATSDB
Now in tcode CAT2, when I press F4 on City Name field, the list is displayed with City code and City names. And when I select any city code, the ZZNAME is populated by City code instead of City name.
I want that City Name should be populated in ZZNAME and City Code should be populated in hidden field ZZCITY.
Please tell me how I can fix this problem.
Thanks in advance.
mini

Hi
Try selecting the Improting Check box aswell. if a screen field is hidden or display mode we can not use F4 help for that field.
you can also take the help of DYNP_READ_VALUES to get the selected value before PAI
Check whats happening in Debug.
Cheers
Ram

In CAT2 - The search help populating the input field with wrong data

Hi Guys,
I have created a ZCITY table for which has below 2 field
ZZCITY (Code ) (5 Char) u2013 Key field
ZZNAME (City Name ) (40 Character)
I have added a custom field ZZCITY & ZZNAME in CI_CATSDB. Funtional guy has configured to make ZZNAME as VISIBLE and ZZCITY is HIDDEN on CAT2 screen in Data Entry area.
I created search help on table ZCITY with export parameters as ZZCITY and ZZNAME.
In SE11, I have mapped the export parameters with CI_CATSDB
Now in tcode CAT2, when I press F4 on City Name field, the list is displayed with City code and City names. And when I select any city code, the ZZNAME is populated by City code instead of City name.
I want that City Name should be populated in ZZNAME and City Code should be populated in hidden field ZZCITY.
Please tell me how I can fix this problem.
Thanks in advance.
mini

Hi,
Search helps have a one to one relationship with a screen field. To achive what you are trying to, I would have ZZCITY and ZZNAME side by side, and i would have a drop down only only ZZCITY. The key of the table will be ZZCITY. So when you chose the record, The city will populate in ZZCITY and you can make use of user exit EXIT_SAPLCATS_002 to populate the name automatically in the ZZNAME field.
thanks.
JB

Popup not populating the originating field with selected results

Customized setting browser.link.open_newwindow.restriction 0.
Popups from searchable fields open in new tab BUT they do not populate originating field with results.
"Diabetes" in search box get choices 250 2504 check choice Hit confirm and search box should have a number 250
Worked in FF3 not 8.

Tried that but not working.
It works fine if I default the newwindow.restriction to 2.
BUT I like the way the windows tab with 0 AND it used to work in FF3.
Tried to find safe mode, but FF9 not listed in my programs (FF3 was).

Stop thunderbird from automatically populating the To: field when replying

Is there a way to stop Thunderbird from automatically populating the To: field when replying to an email?.
Also is there a way to get Thunderbird to request confirmation of addresses emails are to be sent to?

'Reply' is supposed to do exactly that. Use 'Forward' instead.
Wrt return receipts check this article.
http://kb.mozillazine.org/Figuring_out_whether_the_recipient_read_your_message

Auto populating the Notes field in XK02/FK02

Hi Experts,
I have a requirement where I need to auto-populate the Notes field with some text.
When the user clicks the arrow next to Email field a pop up comes up. In this pop up there is a Notes field. (Please see the Screen shot)
I want this Notes field to be auto-populated with "Notes".
How can I accomplish this?
Please advice.
Thanks.

Hi -
1. In SE51, go to progrram - SAPLSZA6 and screen 600, you will find in the PBO
MODULE precalculate.                                      "*981i
MODULE d0600_status.
MODULE d0600_output.
LOOP AT g_d0600_adsmtp WITH CONTROL t_control6 CURSOR
    t_control6-current_line.
    MODULE d0600_display_line.
ENDLOOP.
MODULE d0600_cursor.
2. In the 1st three module below check if any user exit / BADI is there .
(a) MODULE precalculate.
(b) MODULE d0600_status.
(c) MODULE d0600_output
If yes check for modifying the value of the field 'REMARK' in the interanl table g_d0600_adsmtp.
Example g_d0600_adsmtp(1)-Remark = 'Notes'
3. If no BADI / exit is available, then go for implicit enhancement in the perform inside MODULE d0600_output. i.e    FORM dynpro_output .
At the end of form    FORM dynpro_output - modify the internal table   ct_comm_table.
Please note - This form may be used by other programs, so you can put some conditions like restricting to trasaction code etc.

Im having problems with my Kids facetime accounts that seem to be because they are both using my itunes and there are conflicts with multiple email addresses? Is it possible to now set the kids up with their own accounts without losing their apps etc

Hi All,
I have my kids using iTunes via thier ipods etc through my own account and this hase been the case for some time?
This has started to cause issues lately with imessaging and facetime, as there seems to be a limit on email addresses that can be associated with one account?
I wonder if I would be best off setting the kids up with their own accounts, but want to be able to do this without them losing their existing apps, music etc?
Is this possible, if so is there a simple process cos I can seem to find anything relating to this?
many thanks, Jim

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

The incorrect iCloud email (in the from field)address is appearing

The incorrect iCloud email (in the from field) address is appearing on my iPod touch, but not on my MacBook Pro. The I Pod's ICloud email account is using my account for Itunes etc., not the icloud email address, how can I reset the "from" address?

ok thanks, so if I do nothing straight away, they won't free the address up and give it to someone else, correct?

SAP Cloud SDK : How to create the Note Field with Char 1000 length

Hi Experts,
I have a requirement to create Note type fields in the standard business object. and that note field should be 1000 char length.
Also I need to check whether that Note field we can add under the standard report or not with report enhancement?
1) How to make a Note type field using SDK with length 1000 char? Is it possible? If yes How ?
2) If using SDK Note type field possible then how to display that field in report ?
Many Thanks,
Mithun

Hi Frank and Horst,
I have followed the steps you have mentioned in the post.
1) Create Business Object Extension.
2) Add the Custom Field with Type " LANGUAGEINDEPENDENT_EXTENDED_Text".
3) Enhance the Screen and Add into the Header section of the COD_TI screen.
I have successfully entered the unrestricted character into that field.
But I want to add that custom field into the Standard Data Source or Standard Report.
1) Is it possible to add custom field under the Standard Data Source or Report Using SDK?
2) Is it Possible to display the 1000 character length on the Report field?
3) Is it possible to display the created extension field under the report / data source using SDK?
Many Thanks,
Mithun

Mapping the CMP Fields with the Database Table using Websphere???

Hi,
How to Map the CMP Fields with the Database Table using Websphere
thru ejb.jar.xml???
Thanks,
JavaCrazyLover

Hi,
How to Map the CMP Fields with the Database Table using Websphere
thru ejb.jar.xml???
Thanks,
JavaCrazyLover

Data moves to the next field with 'tab' or 'click' on writable pdf.

Anyone experience data moving to the next field with tab or click on writable pdf?

Thanks Frank. I might do that.
But I managed to find a temporary solution..yay!!!! :)
I added in the clientListener for the inputListOfValues' valueChange event
<af:clientListener method="launchPopUp" type="valueChange"/>
and in javascript I call the TAB action of AdfLovInternalEvent
<af:resource type="javascript">
function launchPopUp(evt) {
AdfLovInternalEvent.queue(evt.getSource(),AdfLovInternalEvent.ACTION_TAB,true);
</af:resource>
so it's forcing to perform the tab action when there is value change. doesn't matter tab or enter or mouse click on something else.
it seems to work for now..
I'll have to test it out a few more times to see if there is anything I missed.

I would like to fill up the following pages. If I fill up the first fields with some letters, they m

I would like to fill up the following pages. If I fill up the first fields with some letters, they multiplay each other in several other fields, there I don't want them. Can you help me?

You can't change that, and we can't either. It's an error in the creation of the form. ALL of the fields that "auto populate" have the same name and description, so when you fill one, the rest fill by default with the same info. You'll need to contact the author of the form and inform them of the error.

Lync 2013 Error - Certificate could not be published in the database associated with User Services Cluster

Hi Lync gurus,
I have a weird issue:
Just installed a Lync Standard 2013.
Everything works except I keep getting this error in Log: every 30 minute or so.
First an Error: Event 47067
A server did not respond to HTTP request
Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
https://lyncserver.domain.local:444/LiveServer/UserPinService.
Cause: Server might be down or the network path between servers might not be properly configured.
Resolution:
Please ensure that the server can be connected on the target port using telnet and then re-try.
Then I get a Warning: Event 47068
GetAndPublish web service failed.
Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
Resolution:
Please ensure that the user services is reachable and the database is up and running.
Thanks for any help

Please check you can telnet port 443 and port 444 on Lync Front End Serve from client.
Try to regenerate a new certificate for Lync Front End Server.
Check all the services on Lync Front End Server are started.
Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
For the detailed steps:
Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to login the remote desktop with user id and password using coded ui

we are using vs 2013, we have automated some automated test cases using coded ui. i have on problem while i am running the those test cases in remote system. here the scenario is "after executed one test case we need to restart the system. After restarted
I have to login the remote system with user credentials to continues execution for the remaining test cases." it is very helpful to me.. so please guide me how to overcome these problem?
Thanks in advance ...

Hi Divakar,
As far as I know, there isn’t this feature of remote test in VS2013.
I suggest that you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there so the others can vote it. If you submit this suggestion, you might post that link here which will
benefit others who has the similar issue
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Reply to email populating the to: field with users own address!

Similar Messages

Maybe you are looking for