Repo servers in the uk, horridly slow
right there are 3 servers in my mirrorlist.pacwhatever for the uk. all of them are horridly slow! the one im using now starts off at a good 700kbs then drops to 60 ish! why?!
am i doing this the right way by uncommenting one server in my mirrorlist.pacwhatever
Cew27 wrote:right there are 3 servers in my mirrorlist.pacwhatever for the uk. all of them are horridly slow! the one im using now starts off at a good 700kbs then drops to 60 ish! why?!
am i doing this the right way by uncommenting one server in my mirrorlist.pacwhatever
Are the settings correct in /etc/pacman.d/mirrorist? That's the file that pacman's using and was recently updated.
--EDIT--
I didn't realize that there way another thread. Cew27, cross posting is not helpful.
Similar Messages
-
POP3 mail servers locking up and very slow!
POP3 mail servers locking up and very slow! What is the deal with this? Verizon does not monitor these situations? Residential mail a low priority. Businesses run their own servers. Now we are back to having server issues again with Verizons Email? Last time mail was being delayed and now servers connect and lock up!
FWIW I am not experiencing any slowdowns or lockups on email. I Just checked two of my Verizon email accounts and no problem. But it is almost an hour since you posted so maybe Verizon fixed something?
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248 -
I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]] -
How to create reports servers with the same name in two nodes in Reports
Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas? -
I am using PC, Windows 7, updated to iTunes11.0.
purchased an app from iPad Mini for free, and then when I open iTunes in windows, it automatically try to download the app, and freezes.
I am not sure what is the problem behind, but the crashes certainly slows down my computer ( i7 quad core, with 3GB ram, after crashing it is slower than a P4 computer....)
Is it possible to Not Sync the app into itunes?Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!
-
Multiple Node Manager Instances and servers sharing the same domain home.
Hi,
We have a 8 man server weblogic cluster spread over 4 machines. Each machine runs 2 man servers each.
Each of the machine is configured to run node manager.
We use shared storage accessible to all 8 servers and all 8 man servers have the same domain_home.
Lets call it W:/domain
Now the problem we are facing is that node manager running on 1 machine is trying to access/control a managed server on a different machine after a machine restart.
eg.
ManServer1 Home : W:/domain/servers/server1 ====> runs on Machine 1
ManServer2Home : W:/domain/servers/server2 ====> runs on Machine 2
Problem is node manager on machine 1 is trying to restart man server 2. The path W:/domain/servers/server2 is accessible to Machine 1.
After a restart, what I assume is happening is that the nodemanager is checking all servers folder under Domain_Home/Servers and trying to restart servers instead of restarting only those which it should start. The config file has the server and machine assignment done correctly. Is there a way to make this configuration towork. Or do we need to create different domain_home's for different man servers like
Domain_Home for MS1: W:/domain/MS1 ( Server Home would be : W:/domain/MS1/servers/MS1)
Domain_Home for MS2: W:/domain/MS2 ( Server Home would be : W:/domain/MS2/servers/MS2)
Regards,
Atheek
Edited by: atheek1 on 03-May-2010 00:27Thanks - We have tried putting 2 dad entries in file, but not sure how you connect. You only specify a port number, so how does it connect that to a db???
-
Why does my iPhone 5 say its on 3G?
Is the iPhone running slow on other wifi networks?
Does your carrier support 4G/LTE? You can check here: http://www.apple.com/iphone/LTE/
If they do then are you in an area of coverage?(check with your carrier) -
Listener not working in one of the servers of the Standby site
Hello,
The system is a RAC with two servers working as Primary site, and two servers working as Standby site.
Both servers of the Primary site are sending redo logs to one of the servers of the Standby site. The other server of the Standby site is not receiving any redo log.
I have checked the listener.ora and the tnsnames.ora files of the server that is not receiving and it is well configured comparing it with the server that is receiving the redo logs.
If I check the status of the listener: lsnrctl status listener_<node name>
Both of the Standby servers look fine.
But if I connect directly to the database...
In the 1st server of the Standby, the IP appears:
SQL> show parameter listener
NAME TYPE VALUE
local_listener string (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.xxx)(PORT = xxxx))
remote_listener string LISTENERS_DB
Nevertheless, in the second server of the Standby site, the one that is not receiving the redo logs, the IP does not appear:
SQL> show parameter listener
NAME TYPE VALUE
local_listener string (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT = xxxx))
remote_listener string LISTENERS_DB
I have found the following to reload the listener:
Oracle# lsnrctl reload listener_`hostname`
Oracle# lsnrctl reload listener_standby
Has anyone tried this? Did it work? It can be run without affecting the sytem, Dataguard, replication..., right?
If you have another idea to fix this, let me know please.
Thank you ;)
Edited by: user11281526 on 29-oct-2009 4:35
Edited by: user11281526 on 30-oct-2009 7:36
Edited by: user11281526 on 31-oct-2009 4:11If I see the status of the listener_standby in the second server of the Standby site, the one that it is not receiving redo logs, it looks like it is fine. Why?
#lsnrctl status listener_standby
LSNRCTL for Solaris: Version 10.1.0.4.0 - Production on dd-mm-yyyy hh:mm:ss
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=IP_second_server_standby)(PORT=xxxx)))
STATUS of the LISTENER
Alias listener_standby
Version TNSLSNR for Solaris: Version 10.1.0.4.0 - Production
Start Date dd-mm-yyyy hh:mm:ss
Uptime xx days yy hr. zz min.
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/product/10.1.0/db_1/network/admin/listener.ora
Listener Log File /opt/oracle/product/10.1.0/db_1/network/log/listener_standby.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=IP_second_server_standby)(PORT=xxxx)))
Services Summary...
Service "DB1" has 1 instance(s).
Instance "DB1", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Edited by: user11281526 on 29-oct-2009 6:41
Edited by: user11281526 on 29-oct-2009 6:42
Edited by: user11281526 on 29-oct-2009 6:43 -
Blue Screen of Death of multiple Windows Multipoint Servers at the same time in NUServer64.sys
Hi, we are running
Windows MultiPoint Server 2011 on 4 Dell 9010 machines and 45 Wyse E02 clients connected by 4 switches. Every week we got 2 or 3 random BSoD for all servers at the same time. Memory dump for server 2,3,4 show that the exception is from NUServer64.sys.
Please check below for the system event logs and memory dump analysis output. Any help would be appreciated!
server1:
Warning 11/17/2013 8:55:52 PM
e1cexpress 27
None
Critical 11/17/2013 8:55:48 PM
Kernel-Power 41
(63)
Error 11/17/2013 8:56:08 PM
BugCheck 1001
None
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0x0000000000000000, 0x0000000000000008, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-19765-01.
Error 11/17/2013 8:56:03 PM
EventLog 6008
None
The previous system shutdown at 12:53:40 on 2013/11/18 was unexpected.
Error 11/17/2013 6:55:49 PM
Disk 11
None
The driver detected a controller error on \Device\Harddisk2\DR2.
Error 11/17/2013 6:55:48 PM
Disk 11
None
The driver detected a controller error on \Device\Harddisk2\DR2.
Warning 11/17/2013 3:42:08 PM
Microsoft-Windows-TerminalServices-Licensing
18 None
server2:
Warning 11/17/2013 8:55:39 PM
e1cexpress 27
None
Critical 11/17/2013 8:55:31 PM
Kernel-Power 41
(63)
Error 11/17/2013 8:55:52 PM
BugCheck 1001
None
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff80002c80166, 0xfffff880023397e8, 0xfffff88002339040). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-17518-01.
Error 11/17/2013 8:55:44 PM
EventLog 6008
None
The previous system shutdown at 12:53:53 on 2013/11/18 was unexpected.
Warning 11/17/2013 7:16:07 PM
NUServer64 3
None
server3:
Warning 11/17/2013 8:55:38 PM
Microsoft-Windows-TerminalServices-Licensing
18 None
Error 11/17/2013 8:55:31 PM
BugCheck 1001
None
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000004e (0x000000000000009a, 0x0000000000417c94, 0x0000000000000006, 0x0000000000000002). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-9937-01.
Warning 11/17/2013 8:55:24 PM
e1cexpress 27
None
Critical 11/17/2013 8:55:21 PM
Kernel-Power 41
(63)
Error 11/17/2013 8:55:27 PM
EventLog 6008
None
The previous system shutdown at 12:53:49 on 2013/11/18 was unexpected.
server4:
Warning 11/17/2013 8:55:33 PM
Microsoft-Windows-TerminalServices-Licensing
18 None
Warning 11/17/2013 8:55:09 PM
e1cexpress 27
None
Critical 11/17/2013 8:55:05 PM
Kernel-Power 41
(63)
Error 11/17/2013 8:55:25 PM
BugCheck 1001
None
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000000100000001, 0x0000000000000002, 0x0000000000000001, 0xfffff8000328abe6). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-14055-01.
Error 11/17/2013 8:55:14 PM
EventLog 6008
None
The previous system shutdown at 12:53:21 on 2013/11/18 was unexpected.
Error 11/17/2013 8:51:47 PM
NUServer64 4
None
\Device\NUServer_995D6600
<995D6600_3> Disconnect fail.
Error 11/17/2013 8:51:47 PM
NUServer64 4
None
\Device\NUServer_995D6600
<995D6600_3> Connect fail.
Warning 11/17/2013 8:51:47 PM
NUServer64 3
None
\Device\NUServer_995D6600
<995D6600_3> Connect time-out.
Warning 11/17/2013 8:50:00 PM
NUServer64 3
None
\Device\NUServer_995B9000
<995B9000_3> Hi-Perf socket active clear.
Error 11/17/2013 8:49:25 PM
NUServer64 4
None
\Device\NUServer_995D6600
<995D6600_3> Disconnect fail.
Error 11/17/2013 8:49:25 PM
NUServer64 4
None
\Device\NUServer_995D6600
<995D6600_3> Connect fail.
Warning 11/17/2013 8:49:25 PM
NUServer64 3
None
\Device\NUServer_995D6600
<995D6600_3> Connect time-out.Memory dumps:
server1:
2: kd> !analyze -v
* Bugcheck Analysis *
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000008, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
+3031623733386137
00000000`00000000 ?? ???
EXCEPTION_PARAMETER1: 0000000000000008
EXCEPTION_PARAMETER2: 0000000000000000
WRITE_ADDRESS: 0000000000000000
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x1E_c0000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
TRAP_FRAME: fffff8800c744860 -- (.trap 0xfffff8800c744860)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=0000000000000000 rsp=fffff8800c7449f0 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000f44 r10=fffff80003602000
r11=0000000000000358 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
00000000`00000000 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800036c2738 to fffff80003677bc0
STACK_TEXT:
fffff880`0c743fd8 fffff800`036c2738 : 00000000`0000001e ffffffff`c0000005 00000000`00000000 00000000`00000008 : nt!KeBugCheckEx
fffff880`0c743fe0 fffff800`03677242 : fffff880`0c7447b8 00000000`00000030 fffff880`0c744860 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x487ed
fffff880`0c744680 fffff800`03675dba : 00000000`00000008 00000000`00000000 00000009`00000000 00000000`00000030 : nt!KiExceptionDispatch+0xc2
fffff880`0c744860 00000000`00000000 : 00000000`00000030 ffffffff`fffe7960 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+487ed
fffff800`036c2738 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+487ed
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 521ea035
FAILURE_BUCKET_ID: X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+487ed
BUCKET_ID: X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+487ed
Followup: MachineOwner
server2:
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (7e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002c80166, The address that the exception occurred at
Arg3: fffff880023397e8, Exception Record Address
Arg4: fffff88002339040, Context Record Address
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!KeSetEvent+16
fffff800`02c80166 f6037f test byte ptr [rbx],7Fh
EXCEPTION_RECORD: fffff880023397e8 -- (.exr 0xfffff880023397e8)
ExceptionAddress: fffff80002c80166 (nt!KeSetEvent+0x0000000000000016)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 000000010f7f0a50
Attempt to read from address 000000010f7f0a50
CONTEXT: fffff88002339040 -- (.cxr 0xfffff88002339040)
rax=0000000000000000 rbx=000000010f7f0a50 rcx=0000000000000001
rdx=0000000000000000 rsi=fffffa800f7ec050 rdi=fffffa800f7ec1a0
rip=fffff80002c80166 rsp=fffff88002339a20 rbp=000000010f7f0a50
r8=0000000000000000 r9=0000000000000150 r10=fffff80002c06000
r11=fffff88002339a30 r12=0000000000000000 r13=fffffa800de82220
r14=fffffa800f7f0ae0 r15=0000000000000002
iopl=0 nv up ei ng nz na pe nc
cs=0010 ss=0000 ds=002b es=002b fs=0053 gs=002b efl=00010282
nt!KeSetEvent+0x16:
fffff800`02c80166 f6037f test byte ptr [rbx],7Fh ds:002b:00000001`0f7f0a50=??
Resetting default scope
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 000000010f7f0a50
READ_ADDRESS: 000000010f7f0a50
FOLLOWUP_IP:
NUServer64+65f1
fffff880`0ab8c5f1 488b6c2448 mov rbp,qword ptr [rsp+48h]
BUGCHECK_STR: 0x7E
LAST_CONTROL_TRANSFER: from fffff8800ab8c5f1 to fffff80002c80166
STACK_TEXT:
fffff880`02339a20 fffff880`0ab8c5f1 : 00000000`000003f0 00000001`00000000 fffffa80`0f7ec000 00000000`00000500 : nt!KeSetEvent+0x16
fffff880`02339a90 fffff880`0ab8c8aa : fffffa80`0f7ec1a0 fffffa80`0f7eeb0c fffffa80`0f7ee2c8 00000000`00000002 : NUServer64+0x65f1
fffff880`02339ad0 fffff800`02f721d3 : fffffa80`0f7f0ae0 fffffa80`0f7ec260 fffffa80`0f7ec050 fffffa80`0c72e040 : NUServer64+0x68aa
fffff880`02339b40 fffff800`02c85261 : fffff800`02e21200 fffff800`02f72101 fffffa80`0c72e000 00000000`00000000 : nt!IopProcessWorkItem+0x23
fffff880`02339b70 fffff800`02f182ea : 501a7d4d`a14dcd79 fffffa80`0c72e040 00000000`00000080 fffffa80`0c70b6f0 : nt!ExpWorkerThread+0x111
fffff880`02339c00 fffff800`02c6c8e6 : fffff880`01f42180 fffffa80`0c72e040 fffff880`01f4d0c0 9ae0ec34`00b81aae : nt!PspSystemThreadStartup+0x5a
fffff880`02339c40 00000000`00000000 : fffff880`0233a000 fffff880`02334000 fffff880`02339370 00000000`00000000 : nt!KiStartSystemThread+0x16
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: NUServer64+65f1
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NUServer64
IMAGE_NAME: NUServer64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4f66a064
STACK_COMMAND: .cxr 0xfffff88002339040 ; kb
FAILURE_BUCKET_ID: X64_0x7E_NUServer64+65f1
BUCKET_ID: X64_0x7E_NUServer64+65f1
Followup: MachineOwner
server3:
0: kd> !analyze -v
* Bugcheck Analysis *
PFN_LIST_CORRUPT (4e)
Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 000000000000009a,
Arg2: 0000000000417c94
Arg3: 0000000000000006
Arg4: 0000000000000002
Debugging Details:
BUGCHECK_STR: 0x4E_9a
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80002d629ef to fffff80002cd3bc0
STACK_TEXT:
fffff880`14417968 fffff800`02d629ef : 00000000`0000004e 00000000`0000009a 00000000`00417c94 00000000`00000006 : nt!KeBugCheckEx
fffff880`14417970 fffff800`02e0403b : fffff880`14417a08 fffffa80`10cd1b88 fffff880`144179e0 00000000`000005a0 : nt!MiBadRefCount+0x4f
fffff880`144179b0 fffff800`02e078a7 : fffffa80`12894000 00000000`00000000 fffff6fb`7ea004a0 fffff800`00000001 : nt!MiFreePoolPages+0xa8b
fffff880`14417ac0 fffff880`0ad8d07a : 00000000`00000003 fffffa80`0f4471a0 fffffa80`36747345 fffffa80`00000000 : nt!ExFreePoolWithTag+0x7c7
fffff880`14417b70 fffff800`02f702ea : fffffa80`10cd1a80 00000000`00000080 fffffa80`0c70a740 003f005c`005c0000 : NUServer64+0x1707a
fffff880`14417c00 fffff800`02cc48e6 : fffff800`02e4ee80 fffffa80`10cd1a80 fffff800`02e5ccc0 00310026`00330023 : nt!PspSystemThreadStartup+0x5a
fffff880`14417c40 00000000`00000000 : fffff880`14418000 fffff880`14412000 fffff880`144174b0 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
NUServer64+1707a
fffff880`0ad8d07a 440f20c0 mov rax,cr8
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: NUServer64+1707a
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NUServer64
IMAGE_NAME: NUServer64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4f66a064
FAILURE_BUCKET_ID: X64_0x4E_9a_NUServer64+1707a
BUCKET_ID: X64_0x4E_9a_NUServer64+1707a
Followup: MachineOwner -
just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Why is the refresh rate slower in lab mode? photoshop cc 2014
hi
why is the refresh rate slower in lab mode?
for example i load an image , rgb , ad an adjustament layer -> curve and i start to play with curve -> the refresh is instantaneous (i mean the image become more dark or lighter instantaneous )
but if i load an image -> conver in lab mode , the refresh rate is slower
i tried cs6 too, same behavior
ps how can i have an email to notify me that someone answer to this discussion?
thankshi
there is nobody can check it?
under windows 7 or 8
thanks -
Please HELP!! I just switched to Lion. I have created multiple websites using iWeb 3.0.4 and despite my having saved their 'domain' files in various locations and using different filenames, upon opening the domain files I keep getting the very last site I published. All the sites were published to third party servers. The domain files (still have a preview that look correct and have different file sizes) but keep going back to the last site published. HELP ME PLEASE!! Are the old files still available?!!
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?
Wifi issues are one of the common issues being reported by users. There is not much you can do at this point but wait and hope that th 10.8.1 update will address these issues.
-
mid 2007 iMac 2.4GHZ. after start up the iMac will slow down to a freeze. Specially while on internet (youtube).
See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information. -
Problem with InDesign CC redrawing the screen too slow while using Zoom tool
Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).
Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.
Maybe you are looking for
-
Add stock without goods receipt and PO - is it possible
Hi Gurus, For the needs of a presentation in SD, I need to add stock to materials I have created to execute SAP SD processes. Can I add stock without creating a purchase order and a goods receipt? Regards Chris
-
Tips on upgrading to new Airport Extreme from an older version
I've just ordered the lastest Airport Extreme (5th generation) and am looking for tips for a smooth transition from an older Airport Extreme. Thanks in advance for any help and suggestions!
-
In Exchange server 2007, is syncing notes to iOS device supported?
In Exchange server 2007, is syncing notes to iOS device supported? Specially iPhones, and iPads. Thanks.
-
MR11_OLD and assignment number
Hello, One of our program uses BDC for MR11_OLD , we found that it is trying to populate the assignment number field for all the items which are non GR/IR line items and this is not happeneing for all but few, I want to know how I can correct this pr
-
Firefox appending or leaving out Browser History results
Fire fox for years has not been accurate with my Browser history. This is clearly not a bug, as I've used multiple versions of firefox on up to 30 computers in the last 5 years. For example I did a little googling to find some cheat codes on the game