Repointing "Help" link to a different source in EP6 SP2

Hi all,
I am using EP6 SP2 Patch 4 HF 7. I need to re-point the "Help" link in the top of EP6 SP2 to an different source. Presently it is pointing to http://help.sap.com and since mine is an intranet portal..cannot point to that.
Any idea where do I have to change the link ?
Regards,
Rajan.K

Hi!
You can customize this link by editing:
Content Administration - Portal Content - Portal Content - Portal Users - Standart Portal Users - Default Framework Page.
In popup menu choose "Edit". Select "Masthead iView" and press "Edit" link. Then in "Property Category" choose "Navigation" and in "Help Link URL" enter link you preffer.
WBR, Lnk.

Similar Messages

Quit help links in IAC's

Hi All,
In the IAC's, if you see in the tool bar, you can see two links, QUIT and HELP. I want to point the help link to a different web page. Could you please let me know, if it can be done by configuration. if so, where do you think should i change.
somewhere like system service, etc...
please help me in this regard.

klaus,
I will check it. i want to point all the help links of IACs to a central place where all my documents are stored. i.e. let us say to the link <b>http://help.mycompany.com</b>. where should I do that?
i dont want to create a document and put it under info/docu_MYSERVICE.html, because i have already my documentation in a central link.
please help me in this regard.
how to hide quit button?
Thanks

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?
Thanks!

Dear Linc,
Thank you for the advice, John Blanchard1 and Linc Davis
As suggested in your reference thread I removed "/Library/Printers/hp/PDEs/hpPostScriptPDE.plugin" and the problem has been resolved.
I am guessing the the plug-in for the hp printers got corrupted and effected every thing, or became unsuitable when I installed an Apple update. I would be most grateful if you can confirm how the problem was coursed so I can understand and learn from this experiance.
Ash

I have just updated my Ipod to the latest ios.(deleting everything) and using different sources to get my music back it seems that every time i select multiple/individual songs on itunes i can change artwork but will not show up on my ipod?

I have a windows 8 computer and have recently updated my ipod to the latest ios and it has wiped my Ipod clean except for my photos. whilst trying to get my music back using different sources like CD's and stuff i cant seem to get any album art to load on my Ipod? I can go on itunes and highlight single/multiple items and change the artwork and my computer will confirm it but when I look on my Ipod it doesnt display any art work or allow me to change the artwork that is already there? i need help please!

Album artwork can be added/changed on songs via the iTunes Get Info menu item from the File menu. Note that music that you loaded from CDs will not have any artwork. If you want to aquire artwork you can try the File menu item Library > Get Artwork or you can download artwork from the internet, etc. Note that just changing artwork on your computer won't affect the iPod until you sync.
If the artwork is correct on your computer iTunes then delete all the music on your iPod by syncing with iTunes with no music selected. Then reload the music onto your iPod by again syncing with iTunes with all the music you want selected.

Hello, I want to perform a simple task. I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage

Hello, I want to perform a simple task.I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage and i have not purchased anything with it. My other Adobe ID account is linked to an email i rarely use and don't particularly want to use. i have tried changing the linked email account to my regular one i use. But it obviously does not allow me because of it already being linked to my other non used obsolete Adobe ID account. Is there any solution to this?? Please help.

Adobe contact information - http://helpx.adobe.com/contact.html may help

Why is so slow filtering links in a website source code?

I was using Automator extracting links from a webpage, and then i pasted them in a textedit document. I thought it would be better doing it by applescripting, but it's sooooo slow; to grab and filter all the links in a website source code lasts about 1 or 2 minutes! With Automator barely 20 secs. I don't know which different process it is inside...
Any ideas?

No the code worx... the forum software took away ] and [
tell application "Safari"
tell document 1
set theLinks to (do JavaScript "
var hrefs = new Array();
for (var i=0;i<document.links.length;i++)
hrefs.push(document.links[i])
hrefs;
set site_name to (do JavaScript "document.title")
end tell
end tell
tell application "TextEdit"
launch
set theText to "Link at: " & site_name & return & return
repeat with k from 1 to count of theLinks
set theText to (theText & (item k of theLinks) as text) & return
end repeat
make new document at front with properties {text:theText}
activate
end tell

Os windows 7 trying to install PhotoKit 2.06 in CS4 getting 'Owl Orphanage: Photoshop.exe - Bad Image. Have tried downloading Photokit from a different source - same problem. How can I get this to install please?

Has anyone had a problem installing PhotoKit 2.06 in CS4? I keep getting 'Owl Orphanage: Photoshop.exe Bad Image. I have tried installation files from 2 different sources without success. Pixel Genius suggested dropping the unzipped files directly into Plug-ins - that didn't work. Any suggestions would be appreciated.

Hi Peter
I am in touch with Pixel Genius, the plug-in developer, and so far ( this has been going on for 5 days) a solution has not been forthcoming, hence my post. The required files are shown in Windows Explorer but will not load when I fire up CS4. Previously, I ran version 1.2.4 of PhotoKIt without a problem but that was uninstalled to make way for the latest software. Pixel Genius have asked me to open up CS4 Help, System info, and send it to them which I have done. I wait in hope!
John

CONTAINER:atg.service.pipeline.RunProcessException: An exception was thrown from the context of the link named [loadCommerceItemObjects].; SOURCE:java.lang.RuntimeException:

Can Any one help me in finding the cause of following error
16:18:27,565 INFO [PipelineManager] DEBUG Cancel Link Transaction
16:18:27,565 INFO [PipelineManager] DEBUG Transaction is TX_MANDATORY
16:18:27,565 INFO [PipelineManager] DEBUG Setting transaction to rollback
16:18:27,565 INFO [PipelineManager] DEBUG Cancel Chain Transaction
16:18:27,565 INFO [PipelineManager] DEBUG Transaction is TX_REQUIRED
16:18:27,565 INFO [PipelineManager] DEBUG Setting transaction to rollback
16:18:27,565 ERROR [OrderManager]
CAUGHT AT:
CONTAINER:atg.service.pipeline.RunProcessException: An exception was thrown from the context of the link named [loadCommerceItemObjects].; SOURCE:java.lang.RuntimeException: CONTAINER:atg.repository.RepositoryException; SOURCE:org.jboss.util.NestedSQLException: Transaction is not active: tx=TransactionImple < ac, BasicAction: -53eaeff2:f142:52c29876:2a4f status: ActionStatus.ABORT_ONLY >; - nested throwable: (ja
        at atg.service.pipeline.PipelineChain.runProcess(PipelineChain.java:393)
        at atg.service.pipeline.PipelineChainContext.runProcess(PipelineChainContext.java:207)
        at atg.service.pipeline.PipelineManager.runProcess(PipelineManager.java:475)
        at atg.commerce.pipeline.CommercePipelineManager.runProcess(CommercePipelineManager.java:123)
        at atg.commerce.order.OrderImpl.ensureContainers(OrderImpl.java:1745)
        at atg.commerce.order.OrderImpl.getShippingGroups(OrderImpl.java:1084)
        at com.mk.integration.epicor.salesAudit.datamanager.EpicorSalesAuditDataManager.processShippingGroups(EpicorSalesAuditDataManager.java:477)
        at com.mk.integration.epicor.salesAudit.datamanager.EpicorSalesAuditDataManager.constructSalesAuditFeed(EpicorSalesAuditDataManager.java:431)
        at com.mk.integration.epicor.salesAudit.datamanager.EpicorSalesAuditDataManager.exportFullfilledOrder(EpicorSalesAuditDataManager.java:213)
        at com.mk.integration.epicor.salesAudit.processor.EpicorSalesAuditProcessor.exportFullfilledOrder(EpicorSalesAuditProcessor.java:42)
        at com.mk.integration.epicor.salesAudit.scheduler.EpicorSalesAuditScheduler.startSalesAuditExport(EpicorSalesAuditScheduler.java:65)
        at com.mk.integration.epicor.salesAudit.scheduler.EpicorSalesAuditScheduler.doScheduledTask(EpicorSalesAuditScheduler.java:49)
        at atg.service.scheduler.SingletonSchedulableService.performScheduledTask(SingletonSchedulableService.java:253)
        at atg.service.scheduler.ScheduledJob.runJobs(ScheduledJob.java:466)
        at atg.service.scheduler.Scheduler$2handler.run(Scheduler.java:782)
Caused by: java.lang.RuntimeException: CONTAINER:atg.repository.RepositoryException; SOURCE:org.jboss.util.NestedSQLException: Transaction is not active: tx=TransactionImple < ac, BasicAction: -53eaeff2:f142:52c29876:2a4f status: ActionStatus.ABORT_ONLY >; - nested throwable: (javax.resource.ResourceException: Transaction is not active: tx=TransactionImple < ac, BasicAction: -53eaeff2:f142:52c29876:2a4f status:
        at atg.adapter.gsa.GSAItemDescriptor.loadProperty(GSAItemDescriptor.java:5994)
        at atg.adapter.gsa.GSAItem.getPersistentPropertyValue(GSAItem.java:1315)
        at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1208)
        at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1405)
        at atg.repository.RepositoryItemImpl.getPropertyValue(RepositoryItemImpl.java:151)

Hi,
I seems like you don't have any active transaction. Try start or get transaction before execute your required operations.
After it, commit (or rollback, if something wrong happens) the transaction.
Hope it helps.

Why is it that I cannot designate different sources to different backup disks?

I have 2 internal hard drives, B is significantly larger than A. so I've set up 2 backup hard drives of the same capcities (C & D) to mirror the drives A & B. I upgraded to Mountain Lion, thinking I could do the backup respectively with different sources. But just found out I CAN'T! Now it's going to want to back up ALL of A + B data in smaller capacity hard drives and I would end up losing files! NOT GOOD!!!!!

Hi Brett Burger,
Thanks for your reply. For your information, I have set the sampling rate as 10000 as for the sound format, I have set the bits per sample as 16 bit, the rate as 11025 and the sound quality as mono. I tried using your method by changing the sampling rate as 8K but still my program encounter the same problem.
I wish to also create a button that is able to generate a preformatted report that contains VI documentation, data the VI returns, and report properties, such as the author, company, and number of pages only when I click on the button. I have created this in my program, but I am not sure why is it not working. Can you help troubleshoot my program. Or do you have any samples to provide me. Hope to hear from you soon.
Many thanks.
Regards,
min
Attachments:
Heart Sounds1.vi ‏971 KB

Customize portal "Help" link based on user roles

Is there a chance to customize the Help link URL in Masthead iView based on user roles? The use case we have is that the "Help" should be different for users of the purchasing company from those of the supplying company.
Thanks.

Hello Jay.
This is a multi step process.
Step 1 : Create 2 desktops with everything as same but different mastheads.
- Copy your existing desktop and paste it in your working folder in PCD (Not select Delta link)
- Now download masthead par file.
- Modify your masthead par file where you will disable help link. Rename you masthead file (newMasthead.par) and export it from NWDS. Now import it in portal.
- open your framework page in desktop2. Just add your new masthead in it. Enable the new one and disable the existing one.
Step 2 : Create 2 groups of users. (First one belong to users who wish to see help link . i.e existing desktop) (Second of thoese users who do not have to see help link i.e. newDesktop)
- Assign users to appropriate groups.
- Assign same roles to both groups.
Step 3 : Modify main rule section in PCD.
- If group = HelpLinkUsers Then Desktop1
If group = NoHelpLinkUsers Then Desktop2.
You may find above process bit tedious and lengthy.
But if you wish to further customize your portal then this will be needed one day.
If you find problems in implementing any step then please search in google or SDN.
Please revert back on any specific question on above approach you may face while implementing.
Thanks

BEx Integration with different source systems

Hi All
I know we can create BEx querys on top of an infoprovider. But instead of storing data into BW and creating reports using BEx tools can we integrate BEx with the other source systems. Like Business Objects tool which can be integrated with different sources. My client wants to know whether we can integrate with BEx for the following
Support data source -- SAP BW
Support data source -- Oracle
Support data source -- MS SQL Server
Support data source -- MS Access
Support data source -- MS Excel
Support data source -- ASCII Text files
Support data source -- XML/XSD
Support data source -- Web Services
Support data source -- SAP R/3
Support data source -- BO Universe
Thanks for letting me know your opinions

Hi,
in theory you can. You will still have a virtual provider on top of your Infosource which will be connected to your datasource; thus you'll have to create the structures; you'll have to load master data as well... so not so nice solution if you think that at this stage, the storage will be the less of your costs....
How are you going to deal with R/3 data?? I mean a great advantage of BW is really when you have an R/3 behind...
I'd rather consolidate all these disparate datasources using the Visual compsoer which can get this data out of nearly an datasource and merge them in one single report; in theory again you could implement all BEx functionalities but at which cost and effort??
Weird that a customer is asking such a question because it is usually the other way around: use SAP BW data in another front-end... by the way SAP is going to acquire BO soon....
hope this helps...
Olivier.

Numbers: linking cells in different tables

In Numbers, how can you copy the value from a cell in Table 1 to a cell in Table 2? The two cells must be linked so that when the value changes in Table 1 it changes in Table 2 as well.
Thanks,
Striped Trousers

Striped Trousers wrote:
Yes, Jerry, this is what I was attempting to do and I am surprised that Numbers doesn't allow this (you can 'link' cells in different files in Excel). I was beginning to realize this after your last message. I followed your instructions linking cells in the same sheet, and then linking cells in different sheets of the same file. Both worked a treat but as soon as I tried this with a different file, it wouldn't work.
This is something for Apple to work on I guess.
In the meantime, I will enter the value manually and get on with my life! My thanks again for your continued efforts to help.
Happy New Year!
ST.
ST,
Linking between documents can be a can of worms, and is certainly not something that we could label as a basic requirement of a spreadsheet program. In your case, especially, it's probably best practice to isolate the years and not have the documents dependent on one another. Numbers has some nifty features, but it's not the 2-pound Swiss Army knife app that Excel is. There certainly are times when linking between documents would be handy, such as when different aspects of a project are in separate documents and need to be summarized. This would only be the case if the overall project size was very large, or if the project was divided up between different users.
There are many more urgent needs, if the iWork team has time on their hands, such as improving the speed and capacity of the apps.
Glad you are on your way.
Jerry

Linking cells in different spreadsheets

I need to link cells from different spreadsheets but cannot find a command in Numbers to do this. In Excel it is "Copy" from the first spreadsheet and then "Paste Special" into the second spreadsheet. I cannot find this function in any of the manuals or help files.
Does anyone know how to accomplish this?
Maria

Maria Folsom wrote:
I need to link cells from different spreadsheets but cannot find a command in Numbers to do this. In Excel it is "Copy" from the first spreadsheet and then "Paste Special" into the second spreadsheet. I cannot find this function in any of the manuals or help files.
Does anyone know how to accomplish this?
Is it a living link that you wish to get ?
If it is, the response is:
no living link between different documents.
Between two tables from the same document, you may build living links.
Assuming that you want to link cell B2 of table 1 of sheet 5
to cell B2 of table 12 of sheet 1
click in cell B2 of table 1 of sheet 5
type the character "="
cell B2 of table 12 of sheet 1
press return.
In cell B2 of table 1 of sheet 5 you will get the formula
=sheet 1::table 12 :: B2
Yvan KOENIG (from FRANCE mercredi 23 janvier 2008 22:26:56)

Make Portal masthead's help link languague independent?

Hi Team / Experts,
I need to make the help hyperlink in the masthead languague independent.
I know that the content of the help page is stored and maintained in the Portal KM content but it is an HTML file.
And the link to the help page is specified in the ***.masthead iview property
So what is the best solution to do this?
- Shoud i do it with a parameter and control it in the htlm file by reading the parameter and changing the content visible or redirecting it to another page? (then i have to change the html to some jsp file)
- Can i redirect to another page by clicking the help url directly
Regards,
Michael

Hi Jithin,
The link that you've shared talks about a different scenario.
In my case, I want to pass the portal user id when the user clicks on the Help Link present in the header area.
I am trying to pass it along with the Help Link Url property of a masthead iview but it is not getting passed to the target Url.
I would like to know if it is possible to pass the Portal User Id in this way or not.
Though if we create a appintegrator iview and pass the user id <User.UserID> along with the target Url, it reaches there.
Thanks & Regards,
Anurag

Differentiating Master Data from two different source systems

Friends,
i have used standard InfoObjects that provide master data for two InfoCubes which take data from two different source systems. Now the some of the master data is identical in both the source systems (example: 10 stands for "Industrial" in one whereas 10 stands for "Agricultural" in the other). What do i do so that the system(BW) differentiates the two.
Thanks in advance for all the help.
Mike

I tried to include the 0SOURSYSTEM in the compounding of this InfoObject (for master data) but it gives me a list of other objects that use this InfoObject as a reference characteristic and also says that this InfoObject is used in a ODS and data needs to be emptied in the ODS before activating this InfoObject. Please let me know if there is any way out of it.
Thanks
Mike

Repointing "Help" link to a different source in EP6 SP2

Similar Messages

Maybe you are looking for