Report 10g on web.

Dear,
i am using Report 10g. when i buid a report with wizard it runs on the web. but when i build it mannually it don't run on the web.
what's the problem?
thanks
Muhammad Nadeem

Hello,
Do you create a "Web layout" when you create your reports manually ?
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/whatare/reports/webrpt/a_web_rpts.htm
Regards

Similar Messages

Running reports 10g in web

hi
i am trying to run a report from the web
i get the error 'UNABLE TO CONNECT TO REPORT SERVER XXX'
in 6i on the console it works correctly
i want to know if there is a different way to run a report in web 10g, is it necessary to run a report server, or i can like in 6i just configure the registry?
thanks for any help

Hello,
Since 9.0.2, you have to start a reports server :
On Windows rwserver server=repserver
then use a URL like :
http://server:port/reports/rwservlet?server=repserver&report=test&destype=cache&desformat=html
Regards

Not Able to run Report 10g through Web Layout Option

I have installed Oracle Developer 10g on my Laptop, I am able to run form, Report(In paper layout) successfully but when I try to run Report in Web Layout Mode, I am getting following error, Is there any setting is missing, could you provide some hint that would help me in resolving my issue.
Thanks
Kamlesh
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Errors compiling:C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\3000\default\defaultWebApp\persistence\_pages\\_MODULE1001201432.java
javac: invalid flag: Files\Java\j2re1.4.2_01\lib\ext\QTJava.zip;;C:\Dev10g\j2ee\home\lib/ejb.jar;C:\Dev10g\j2ee\home\lib/servlet.jar;C:\Dev10g\j2ee\home\lib/ojsp.jar;C:\Dev10g\j2ee\home\lib/jndi.jar;C:\Dev10g\j2ee\home\lib/jdbc.jar;C:\Dev10g\j2ee\home\iiop.jar;C:\Dev10g\j2ee\home\iiop_gen_bin.jar;C:\Dev10g\j2ee\home\lib/jms.jar;C:\Dev10g\j2ee\home\lib/jta.jar;C:\Dev10g\j2ee\home\lib/jmxri.jar;C:\Dev10g\j2ee\home\lib/javax77.jar;C:\Dev10g\j2ee\home\lib/javax88.jar;C:\Dev10g\j2ee\home\../../opmn/lib/ons.jar;C:\Dev10g\j2ee\home\../../opmn/lib/optic.jar;C:\Dev10g\j2ee\home\../../lib/dms.jar;C:\Dev10g\j2ee\home\../../dms/lib/dms.jar;C:\Dev10g\j2ee\home\../../diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\../../dms/diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\lib/connector.jar;C:\Dev10g\j2ee\home\lib/bcel.jar;C:\Dev10g\j2ee\home\lib/cos.jar;C:\Dev10g\j2ee\home\lib/jsse.jar;C:\Dev10g\j2ee\home\../../oracle/lib/jsse.jar;C:\Dev10g\j2ee\home\lib/jnet.jar;C:\Dev10g\j2ee\home\lib/jcert.jar;C:\Dev10g\j2ee\home\lib/activation.jar;C:\Dev10g\j2ee\home\lib/mail.jar;C:\Dev10g\j2ee\home\../../javavm/lib/jasper.zip;C:\Dev10g\j2ee\home\../../lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../oracle/lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../jlib/orai18n.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/orai18n.jar;C:\Dev10g\j2ee\home\lib/jaxp.jar;C:\Dev10g\j2ee\home\lib/jaas.jar;C:\Dev10g\j2ee\home\jazn.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\jaxb-rt-1.0-ea.jar;C:\Dev10g\j2ee\home\../../soap/lib/soap.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsserver.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsdl.jar;C:\Dev10g\j2ee\home\../../rdbms/jlib/aqapi.jar;C:\Dev10g\j2ee\home\lib/jem.jar;C:\Dev10g\j2ee\home\../../javacache/lib/cache.jar;C:\Dev10g\j2ee\home\lib/http_client.jar;C:\Dev10g\j2ee\home\../../jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../jlib/repository.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/repository.jar;C:\Dev10g\j2ee\home\lib/jaasmodules.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/runtime12ee.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/translator.jar;C:\Dev10g\j2ee\home\lib/crimson.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcms.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcms.jar;;;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\classes;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;.
Usage: javac
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are used
-classpath Specify where to find user class files
-sourcepath Specify where to find input source files
-bootclasspath Override location of bootstrap class files
-extdirs Override location of installed extensions
-d Specify where to place generated class files
-encoding Specify character encoding used by source files
-source Provide source compatibility with specified release
-target Generate class files for specific VM version
-help Print a synopsis of standard options

Hello,
The problem seems to be a space in the Classpath :
javac: invalid flag: Files\Java\j2re1.4.2_01
Files\Java\j2re1.4.2_01 seems to be the end of c:\Program Files\Java\j2re1.4.2_01 ..
Check REPORTS_CLASSPATH
regards

Report 10g in Web Layout

I've configured forms and reports server 10g. Forms are working fine. However report is not running in web layout. I'm getting the following error message in web browser.
Reports Error Page
Thu Jul 19 14:33:14 IST 2007
javax.servlet.jsp.JspException: REP-50002: Server is shutting down
Reports are running in Paper layout.
Can anybody help me about this?

Ok,
first of all are you running your reports on the iAS or OC4J of iDS?
second are you running on windows or linux or unix ...
if running on iAS are you trying to run your report with the in-report server?
If so create your own standalone report server and integrate it in your iAS console with the addNewTarget command
Message indicates that your reports server is not running smoothly , can you access your ias admin console?

How to deploy the Oracle Forms and Reports 10g in Web?

Currently I am working in Oracle forms & Reports conversion project (6i to 10g).
As of now 6i forms working as a standalone application. After migrated it to 10g, I need to deploy the forms and reports in web.
Any one know how to deploy the Oracle forms and Reports in web?
Please help me out. Thanks in advance.
Vimal

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

Pls help me to track post print event in reports 10g (web layout)

I am displaying a report on the web using WEB.SHOW_DOCUMENT built in after calling it from Forms. I want to update some attribute in the database after the report is printed. Where can i place the update statement.
note:I dont need solution for the reports printed using paper layout.
Thanks in advance.

Mr. Marcos, The problem is After-Report trigger will fire when the report is printed in paper layout. when the same report is printed in web layout the After-Report is not firing. It seem that the update code should be included in the Web-Source tab in Object Navigator but I don't know how to script it.

With Reports 10G can you customize you message and stop formatting?

Oracle, states to come here for answer. they said, OTN should be able to help.
If any one knows how this can be done can you please help me out?
thanks,
We were told this was fixed with 10G so we upgraded to 10G. We have a
report and we want it to execute if it's less than 10 records if not we want a
message to come up that the report needs to be scheduled.
Well we run the report and it displays exceeded record count but the format
still runs so no time saved on the web.
If the record count was exceeded we want to HALT the system and not go any
farther.
Now if we could modify the system message 1825 we would be o.k. But we don't
know if that is going to work. If we could change the message we would be
o.k. with that. that would mean changing the system codes though.
### How is the Report being called (Command line, URL or via Oracle Forms): ###
If false comes back in the beginning then we don't want any report formatting
to be done. Right now the format is done it seems but no data is displayed
because criteria isn't met.
So we dont wnat the formatting to be run when criteria isn't met. But for
some
reason it still runs and takes time.
See we have some reports on the web that can only be ran by date range right
now the clients can only run the reports for a 6 months range.. Well some
clients have a lot smaller record count. So we want to change the way the
reports are ran to a records count. If the count is large than said amount
then a message comes up that states the report has to be scheduled. If the
amount is under said amount then the report runs.
So at this time in the report we do a count then we move onto will the report
run or not if over the amount we want to abort the process but we don't want
the client to see the abort. We definately don't want the client to sit and
wait for the format to run when NO Data is to be returned.
### Error messages and error scenario: ###
So what we want is too see a message "Schedule the report count exceeded" and
NO formatting done. If under amount we want the report to run.
### Provide a detailed step-by-step description of your problem or question: ###
Or is there a way to customize the messages the client / users will see. And
no formatting time for no records returned.
Contact me via : E-mail -> [email protected]
Text continued in next action...
20-SEP-04 18:39:53 GMT
Text continued from previous action...
20-SEP-04 19:18:51 GMT
New info : Is there a way if the error messages have to come up that we can
hide the message or have another screen cover that error message something to
cover the message so that the user doesn't see the error message.
20-SEP-04 19:30:23 GMT
Hi Darlene,
Thank you for using MetaLink. Iam currently working on a very critical issue.I shall review/research your issue at the earliest opportunity and w
ill update the SR / call you as soon as we have relevant information. Thank you
for your patience.
Best Regards,
Seema,
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
20-SEP-04 19:30:30 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 00:32:18 GMT
Hi Darlene!
If you are calling the report from a form, try using the EXIT_FORM line in your code.
Thanks and Regards,
Seema
21-SEP-04 00:33:01 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 14:09:20 GMT
New info : We will try it and let you know.
21-SEP-04 14:19:04 GMT
New info : We are not calling the report from a form so this won't work. Any
other way. We are needing to do this badly.
21-SEP-04 14:39:06 GMT
New info : Can I get detailed steps about how to customize the system message
or hide the message when we abort the report?
21-SEP-04 15:38:39 GMT
Hi Darlene!!
As talked to you on phone, here are the steps for you to try.
The below has been run as a test case using emp table in scott schema of a database
1) create a summary coloumn say cs_1 in the data model.
2) point the function to count.
3) Point the source to what ever's count you want it to be pointed to(say empno of emp table of
scott schema)
4) create a user parameter say NO_ROWS
5) in its property palette make its data type number and initial value as 1
6) I had teh following query for my report:
select empno, ename from emp
where rownum <= :no_rows
This means that the report that will be generated will consist of a total no of NO_ROWS(that we
shall be specifying at run time). The before report trigger(mentioned in 7 below) shall assure
that whenever we specify NO_ROWS greater than 5 then the report will display a customized pop up
message.
7) create a before report trigger as:
function BeforeReport return boolean is
user_excp EXCEPTION;
begin
if :cs_1 >5 then
raise user_excp;
return (false);
else
return true;
end if;
EXCEPTION
WHEN user_excp then
SRW.MESSAGE(30, 'Data is more please schedule this report:');
raise SRW.PROGRAM_ABORT;
return (false);
end;
This way when u run a report, an argument is asked whether how many rows do you want to be
displayed as in the parameter NO_ROWS. then you specify the number. If that number is greater
than 5(in this case, due to if :cs_1 > 5 then....) then it will pop up a message saying "Data is
more please schedule this report:"
In case you do not want to specify NO_ROWS..then you need not put that and modify the report
query as "select empno, empname from emp;" i.e. without where clause.
21-SEP-04 16:49:30 GMT
New info : we will try this then update the TAR.
21-SEP-04 16:58:09 GMT
ok you update the tar when you try the above steps.
STATUS:
@CUS
23-SEP-04 02:16:00 GMT
New info : Information from the person that did this suggestion step by step.
I tried this step by step, but unfortunately, it doesn't work the way we want.
First with this suggestion, the user needs to choose how many records they
want
to get, or we default a number of records, in order to run the report. The most
important thing is, whenever you specify the statement return false or raise
SRW.PROGRAM_ABORT in the before report trigger, the system message will pop up.
I really hope that people from Oracle would let us know how to customize the
system message or hide it.
23-SEP-04 14:23:04 GMT
New info : I just thought that we have some sort of message, which I guess is
from the database, when we do claim search on client inquiry. I am just
wondering if we could try the same thing to the report.
The some sort of message looks like this on dev box:
Your search exceeded 5000 records and will surpass the capabilities of this
connection. Please narrow the search criteria and resubmit.
It's just a thought, not sure if it's going to work.
When could we have the DBA Make this change. The servlet.properties???
23-SEP-04 17:30:55 GMT
REQUESTED INFORMATION PROVIDED
===============================
Hi Darlene,
Thank you for providing the requested information. I am currently reviewing/resea
rching the situation and will update the TAR / call you as soon as I have additi
onal information. Thank you for your patience.
Best regards,
Ajit
STATUS
=======
@WIP -- Work In Progress
23-SEP-04 18:04:31 GMT
UPDATE
=======
Hi Darlene,
We cannot modify the system messages nor do I think there is a method to hide the system message. The message that was coming is
due to the raise srw.program_abort command, which is the element through which
we can abort the program.
Thanks
Best Regards
Ajit
@CUS
23-SEP-04 18:29:26 GMT
New info : Can you please look into a way that we can get something to work?
23-SEP-04 18:49:28 GMT
Hi Darlene,
I am sorry to say that but I don't think there is any any workaround to this because the system message is what is generated by the oracle reports i
nternally. Still if you wish you may refer to the otn discussion forum which is
maintained by teh product management group and post a new thread on it. the link
to the forum is Reports
Also since nothing can be done on our side I don't see any reason to keep this TAR open an
d if you wish we can soft close this.
Thanks
Regards
Ajit.
New info : Shouldn't there always be a way to do something? I don't understand
why we were told in 10G that this could be done and now we are told it can't.

K T wrote:
Yep - not nice...unless you do a TE 'Get Info' in the Finder and √ the 'Open in 32-bit mode' box and try again...then, all seems well in snow leopard land.
Really? I figure since I have a Core Duo chip, everything always opens in 32-bit mode. In any case, I did file a bug report and will give your suggestion a try later today.

How to deploy existing forms and reports on the web

Hi Guys,
I have 6i forms and reports within our environment, and we are running client/server architecture, by installing forms and reports runtime on each client PC's. We would like to get rid of this by deploying forms and reports on the web, without zero coding. Can any one suggest and guide me through the process with proper security mechanism enabled along with.
Thanks in advance,
Aji

Thanks for the update,
We have a develpment 10g AS environment setup made,
1) But we are really confused how to present the forms and reports.
We have around 250 forms and reports running on client/server architecture. All these forms/reports have been copied to a fileshare and access control is restricted by folder security.
2) How to deploy forms - entries within formsweb.cfg with Named Configuration sections.
3) How to deploy reports, as to were to copy the .rep files.
getting the following error
REP-110: Unable to open file 'Car_Readings.rep'.
while trying
http://kddsvr6.kddc.com:7778/reports/rwservlet?report=Car_Readings.rep&userid=username/passwd@db&desformat=htmlcss
Thanks in advance,
AJi

What's the fastest way to create simple report for the web?

I have Developer 6i and Oracle 9I installed.
If i have a report already done, how can I make it available to users, so they can access them thru an IP or a host?
can I achieve that just with my developer 6i (report builder) and my database (oracle 9i)???
If so, how?

1) pls see
[     Publishing reports to web - 10G ]
see
[    All Docs for all versions    ]
for 9i version of same document
2) Better to have 9i builder - 9i ias combinations
(not sure whether other combination is supported or not. but understandably it is best to have same combination]
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Form & reports 10g VS Form & reports 6 ???

Hi All,
We have customers that running Form & reports 10g application and they (must) use IAS 10g for deployment.
But now they are considering to downgrade to Form & Reports 6 (client-server). So they put the Form & Reports to a folder on a server and map the folder to the clients.
Actually what are the benefits of running Form and Reports 10g on IAS and Browser compared to running Form & Reports 6 on client server mode ?
Thank you very much,
xto

Hi Xto,
If you use Forms 10g in web mode, thin clinets can be used and hardware cost can be reduced. Only you need to have good application server.
And you can access the application from browser and no need of installation/setup in client machiens. so maintanance cost also can be reduced.
These are some of benefits while running in web mode.
~Gouri Sankar

Showing Oracle reports in current web application with JBOSS as AS

hi:
I have installed the Oracle AS(10g 10.1.2.0.2) and the reports services... I have also installed the Stand Alone J2EE Thin Client (http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/Tools/index.html)
My current web project uses JBoss and I have to show oracle reports keeping the current environment.
I have followed the steps provided on the doc mentioned in the above link.
first i did the following steps ( please refer to the text of that readme doc below)
(//text of readme doc, I have done these steps
1. Deploy THINCLIENT_HOME/reports/j2ee/reports.ear on the J2EE application server.
2. Add the following JAR files to the classpath of the J2EE application server:
* THINCLIENT_HOME/reports/jlib/rwrun.jar
* THINCLIENT_HOME/jlib/zrclient.jar
3. Use THINCLIENT_HOME/vbroker4/lib/vbjboot.jar while starting the application server.
but i cannot understand what is written just next to the above llines in that doc I am pasting those points from that doc
(text of readme doc:
The following section provides detailed instructions on carrying out the above 3 configuration steps with OC4J Standalone Distribution 10g (9.0.4). You need to consult your J2EE application server's documentation to carry out the same steps for your application server.
1. Add the following to OC4J_HOME/j2ee/home/config/server.xml
<application name="reports" path="<THINCLIENT_HOME>/reports/j2ee/reports.ear" auto-start="true" />
2. Add the following to OC4J_HOME/j2ee/home/config/http-web-site.xml
<web-app application="reports" name="web" root="/reports"/>
3. Add the following to OC4J_HOME/j2ee/home/config/application.xml
<library path="<THINCLIENT_HOME>/reports/jlib/rwrun.jar"/>
<library path="<THINCLIENT_HOME>/jlib/zrclient.jar"/>
according to what i understood i went to OC4J which is under my Oracle_Infra directory and then completed the above steps
after that I ran the command (according to this doc):
java -Xbootclasspath/p:<THINCLIENT_HOME>/vbroker4/lib/vbjboot.jar -jar oc4j.jar
the result of this command is following
06/02/09 14:57:37 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0) initialized
and then it never comes back to command prompt
Now after all these steps...i don't understand what to do next and my problem is still there which is How to deploy reports made by oracle reports from my web project links
please help
Waqas

If the links in your example report1 and report2
follow my format stated earlier
http://machine:port/reports/rwservlet/report=reportnam
e.rdf&destype=cache& paramform=htmlcss&server=<YourReportSe
rverName>&userid=scott/tiger@hrdb&desformat=pdf
This is what I believe
>
so http://machine:port/ is the port where
JBoss is running and
This should be the port that the report server is listening on
>
server=<YourReportServerName> is the name of
my oracle report server
so I call the above link in my current application
and the report would show up
Yes
>
that means (correct me if I am wrong) that my reports
would have to be deployed in OracleAS
Yes
>
I have to try all this yet as till this point I was
trying to run Oracle reports deployed in JBoss...
This may be possible, I am not sure.
>
Oracle J2EE Thin Client?
I am not sure what this is used for in your setup.

Maximum number of concurrent reports 10g

Hi all,
We hava an application with two backgroundprocesses running a maximum of 1 report at the same time so in total 2 reports. Also user are allowed to run reports we however do not want them to run more reports at the same time so in total max 3 reports at the same time additonal reports should be stalled to keep performance up.
How can this be setup in reports 10g ?
Regards,
Laurens Wagemakers

1) In the entry Jon has given
<engine id="rwURLEng" .....
>
You should actually do it for
<engine id="rwEng" ...
>
The second one is the one which is used for running reports created through builder and is the most common one (99.99%).
(For URLEngine you can keep 1 engine or 0 engine)
Also
engLife="1".
This is very inefficient. You can put it to "engLife="50". [Otherwise an engine will run only 1 job and a new engine will be spawned. Infact it can run any number of jobs. This life is there only because if there is any small memory leak for a request, it will pile up for very large number of jobs. You can safely put it to 50 (default) ]
2) >>>> will your solution give a message that reportsserver is busy or will it set up a queue <<<<
If more requests come than the number of engines, then those reports will be queued and will be executed as and when engines become free.
3) Reports engine is actually very fast and unless reports are huge, it will complete a report in short time.
According to the load , you should arrive at a "maxEngines" for your server.
If it is too much your machine will crawl ("it" I mean - Number of engines)
If it is too less jobs will get queued
You should come to a balance.
4) I do not know whether any mechanism exists to restrict the max reports run by a user to 1 at a time.
5) Refer Chapter 19 and 20
"Managing and Monitoring OracleAS Reports Services"
"Tuning Reports" document
in the following link
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
Thanks
Ratheesh
[    All Docs     ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

How to view my pro*C reports on the web with forms10g

Hi All,
I have a scenario where :
I just migrated my forms from forms6i to forms10g. My IDS 10g R2 sits on Windows XP machine through which I build my form. My IAs 10g R2 sits on Linux machine throught which I compile my forms. Lot of my forms uses pro*C reports which I want to display on the web. I'm using host command in my forms. My questions are :
1) Do I have to use webtuil?
2) Is my pro*C reports needs to be ftp into my windows machine or I can still run it even though they sit on linux machine.
3) How can i dsiplay my pro*C report on the web?
regds
Lasily

Greetings anandhi108,
After reading your post, it sounds like you are experiencing an error with the Photos app on your iPhone. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
Turn your iOS device off and on (restart) and reset
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities,
BobbyD

Parameter Where - report 10g

Hi
I have a variable vsWhere.
vsWhere := 'WHERE TABLE.COLUNM1 = 1 AND TABLE.COLUMN2 = 3'
I have too the parameter :P_WHERE in the report
I tried to past the variable to parameter in report, but is not ok. The report show just the word "WHERE", why?
ex: vsOther_parameter := 'PARAMFORM=NO BLANKPAGES=NO P_WHERE='vsWhere;
forms and reports 10g
att,
Marcos

Ok
vsOther_parametro := 'PARAMFORM=NO BLANKPAGES=NO MAXIMIZE=YES'
vsOther_parametro := vsOther_parametro || ' P_WHERE=WHERE VI_MOVIMENTO_ESTOQUE.TIPO = 1 AND VI_MOVIMENTO_ESTOQUE.STATUS = 2';
P_WHERE is parameter of report.
report_id:=FIND_REPORT_OBJECT('AEF2001');
----- call the procedure
RUN_REPORT_OBJECT_PROC(report_id,                                   vsReport_servname,                              vsReport_desformat,
CACHE
               vsReport_filename,
     vsReport_desname,
vsOther_parametro,                         vsReport_servlet);
----- end call the procedure
--- procedure that call report
     PROCEDURE RUN_REPORT_OBJECT_PROC(
                                                                                report_id REPORT_OBJECT,
                                                                                report_server_name VARCHAR2,
                                                                                report_format VARCHAR2,
                                                                                report_destype_name NUMBER,
                                                                                report_file_name VARCHAR2,
                                                                                report_desname VARCHAR2,
                                                                                report_otherparam VARCHAR2,
                                                                                reports_servlet VARCHAR2) IS
     report_message VARCHAR2(100) :='';
     rep_status VARCHAR2(100) :='';
     vjob_id VARCHAR2(4000) :='';
     hidden_action VARCHAR2(2000) :='';
     v_report_other VARCHAR2(4000) :='';
     i number (5);
     c char;
     c_old char;
     c_new char;
BEGIN
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_file_name);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
     hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
     hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
     hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY (report_id,REPORT_DESFORMAT);
     hidden_action := hidden_action ||'&userid='||get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
     c_old :='@';
     FOR i IN 1..LENGTH(report_otherparam) LOOP
          c_new:= substr(report_otherparam,i,1);
          IF (c_new =' ') THEN
               c:='&';
          ELSE
               c:= c_new;
          END IF;
          -- eliminate multiple blanks
          IF (c_old =' ' and c_new = ' ') THEN
               null;
          ELSE
               v_report_other := v_report_other||c;
          END IF;
     c_old := c_new;
     END LOOP;
     hidden_action := hidden_action ||'&'|| v_report_other;
     hidden_action := reports_servlet||'?_hidden_server='||report_server_name || encode(hidden_action);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction='||hidden_action||' '||report_otherparam);
     report_message := run_report_object(report_id);
     rep_status := report_object_status(report_message);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
     rep_status := report_object_status(report_message);
--rep_status := report_object_status(report_job_id);
END LOOP;
     IF rep_status='FINISHED' THEN
          vjob_id :=substr(report_message,length(report_server_name)+2,length(report_message));
          WEB.SHOW_DOCUMENT(reports_servlet||'/getjobid'||vjob_id||'?server='||report_server_name,' _blank');
     ELSE
          null;
     END IF;
END;
--- end procedure that call report
--- procedure encode
FUNCTION ENCODE(URL_PARAMS_IN Varchar2)
                                        RETURN VARCHAR2 IS
     v_url VARCHAR2(2000) := URL_PARAMS_IN; -- Url string
     v_url_temp VARCHAR2(4000) :=''; -- Temp URL string
     v_a VARCHAR2(10); -- conversion variable
     v_b VARCHAR2(10); -- conversion variable
     c CHAR;
     i NUMBER(10);
BEGIN
FOR i IN 1..LENGTH(v_url) LOOP
     c:= substr(v_url,i,1);
     IF c in (';', '/','?',':','@','+','$',',',' ') THEN
          v_a := ltrim(to_char(trunc(ascii(substr(v_url,i,1))/16)));
          IF v_a = '10' THEN
               v_a := 'A';
          ELSIF v_a = '11' THEN
               v_a := 'B';
          ELSIF v_a = '12' THEN
               v_a := 'C';
          ELSIF v_a = '13' THEN
               v_a := 'D';
          ELSIF v_a = '14' THEN
               v_a := 'E';
          ELSIF v_a = '15' THEN
               v_a := 'F';
          END IF;
          v_b := ltrim(to_char(mod(ascii(substr(v_url,i,1)),16)));
          IF v_b = '10' THEN
               v_b := 'A';
          ELSIF v_b = '11' THEN
               v_b := 'B';
          ELSIF v_b = '12' THEN
               v_b := 'C';
          ELSIF v_b = '13' THEN
               v_b := 'D';
          ELSIF v_b = '14' THEN
               v_b := 'E';
          ELSIF v_b = '15' THEN
               v_b := 'F';
          END IF;
          v_url_temp := v_url_temp||'%'||v_a||v_b;
     ELSE
          v_url_temp :=v_url_temp||c;
     END IF;
END LOOP;
return v_url_temp;
END;
--- end procedure encode
att,
Marcos

Forms and Reports 10g run on the other client machine

Dear Sir,
Please tell me how to run forms/reports which is compiled/build in ORACLE 10g.
I mean that I have build some forms and reports in Oracle 10g now I want to run them on another client machine without creating oracle application server. Is there any way to run
As example in oracle 6.0 i we only install forms and reports services at client machine and ours froms/ reports are running. Can we do so in 10g also ??
Please guide me about it.
Ghulam Yassen

without creating oracle application server. That is not possible. Forms 10 only runs in web mode, so you need the OAS with the Forms and Reports sever (OAS Enterprise Edition) or the Forms and Reports 10g stand alone server.
in oracle 6.0 i we only install forms and reports services at client machineForms 6i was the last version that you can run in client/server mode.

Report 10g on web.

Similar Messages

Maybe you are looking for