Report 2 returning data from previously ran report 1 - Plus/Viewer

Hello,
We have an issue running through discoverer viewer and plus.
If you run the first report with a parameter for the year with this returns the correct data. However if you run report after the first with year 09-10, the 08-09 data is returned again from the previous report
It doesn't matter which order you run them i.e. if you run the 09-10 first and then the 08-09 the 09-10 data is returned.
The reports work fine when run in Discoverer Desktop.
When 2nd report is run after first it returns the data that appears in the first. This Does not happen on Disco Desktop. The SQL from the reports also runs correctly in TOAD.
Metalink notes suggest turning of the Webcache but this is not turned on in either apps tiers
I have also recreated both reports and this has not made a difference either.
Regards
Rachael

Hi,
Even with webcache turned off Discoverer holds the results of the last run from plus/viewer in the application server and will return these results unless an explicit refresh is entered. Normally, if different parameters are entered this is recognised and the report is re-run. I don't know how you are running your report but for some reason it is not recognising the new parameters and returning the last result set. A refresh should return the correct results.
Rod West

Similar Messages

Query returns data from previous month. Need to have it return data for the entire year

This is the part of the query that returns data by month:
(YEAR(`rereport`.`market_reports_5`.start_date) = YEAR(CURRENT_DATE - INTERVAL 1 MONTH)AND MONTH(`rereport`.`market_reports_5`.start_date) = MONTH(CURRENT_DATE - INTERVAL 1 MONTH))
How can I get it to return data for the year.
TIY

How about omitting the MONTH part:
(YEAR(`rereport`.`market_reports_5`.start_date) = YEAR(CURRENT_DATE - INTERVAL 1 MONTH)
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Reading data from a crystal report using crystal for eclipse

tried both approaches listed here: [Help needed in reading data from a Crystal Report]
but having the same issues, is this a bug or is there some workaround? cant get any results with rowsetcursor and only the first 100 no matter what i do with browsefiledvalues

Hello,
I have the same problem. I need to know values of last record in CrystalReports and i got only 100 records.
Have you found solution for this problem?

Error while loading Reported Financial Data from Data Stream

Hi Guys,
I'm facing the following error while loading Reported Financial Data from Data Stream:
Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
The message appears in Target Data. Item is not filled in almost 50% of the target data records and the error message appears.
Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown. When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data. Item is not filled up, hence causing the error.
For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign. When it is posted as negative / Credit in the source data, it is not properly written to the target.
Should I need to define any breakdown category for these items? I think there's something wrong with the Item definitions OR I'm missing something....
I would highly appreciate your quick assistance in this.
Kind regards,
Amir

Found the answer with OSS Note: 642591.....
Thanks

Return data from all columns apart from a certain data type.

Bit stuck on something, hope somebody here can help:
I want to do a 'select * from ' a table, to return all columns except ones of a certain datatype. ie. I want to return data from all columns, excluding columns of datatype 'SDO_GEOMETRY'.
This gives me the list of columns:
SELECT COLUMN_NAME
FROM   USER_TAB_COLUMNS
WHERE TABLE_NAME = 'ORDER_ITEM'
AND   DATA_TYPE <> 'SDO_GEOMETRY'; But I can't seem to take it any further...
Now if I knew the columns beforehand, then of course I could just list them, excluding the geometry column, but this is to be used for a plug-in for MS Word, where a user can pick database columns to dynamically fill a report from - but I don't want the geometry columns as these can't be handled in this way.

Hi Reggie,
> connects to the database and presents a list of tables
My guess is that this macro is written so it selects from all_tab_cols.
Change that plugin and let it select from a view like the one above. That way, the users won't be able to see/pick anything that you are not able/willing to present for them.
Edit:
You could even tease your users, and let them see the columns, but not being able to pick them.
create or replace view available_tab_columns
as
   select decode(pickable.data_type, null, 0, 1) pickable
         ,atc.* -- narrow down yourself
     from all_tab_cols atc -- or maybe user_tab_cols
         ,(select 'CHAR' data_type from dual union all
           select 'DATE' from dual union all
        select 'NUMBER' from dual
           -- complete positive list, yourself
          ) pickable
    where atc.data_type = pickable.data_type(+);Regards
Peter
Message was edited by:
Peter Gjelstrup

Adhoc Reporting using Data Sources instead of Report Model

Hi Gurus,
I'm working on SSRS 2008. I'm trying to create Adhoc Report using Report Builder 3.0. To select Data Source, both *.rsds and *.smdl are listed. I selected a Data Source which points to a SQL database. When I add New datasets, I'm able to add the fields and
it automatically detect relationships (Joins) using Primary Key and Foreign Key defined in the tables. I'm also able to edit the query. I ran the report and it ran successfully.
My question is I couldn't find any documentation regarding using Data Source for Adhoc Reporting. MS SQL documentation and forums insists that Report Model is required for Adhoc Reporting.
Please let me know if someone tried to create Adhoc Report using Data Source instead of Report Model. While I understand there are more benefits using Report Model (define entities/attributes, show/hide entity/attributes, organize entities/attributes etc.),
I just want to know if this is possible.
Are there any known limitation using this method?
Thanks In Advance!

Hi Ereswaran,
Yes, we can create ad hoc report using report using data source instead of Report Model. Ad hoc reports typically are used to answer a specific question at appoint in time, so consequently people don’t spend a lot of time arranging and formatting the data
in a precise way. Other report development tools are available in Reporting Services to support more sophisticated reporting requirements.
Using Report Builder, we can build a simple report that display data form a single data source as defined by a report model. This tool is most useful for business users who need access to information but lack the skills to write a SQL query. If we have full
experience of SQL query, of course we can use data source instead of Report Model.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
Charlie Liao
TechNet Community Support

BDT *TFKB_Collect FM to return data from PAI

Hi Experts, hope you are going great.
I am working on adding a couple of z fields in table TFKB, and letting users modify them thru tcode FM_FUNCTION. I have added them to the table, and am wanting to edit/update them thru tcode FM_FUNCTION. I was able to add z fields on the FM_FUNCTION through BDT (App Object FMFA in TCode BUS0). However, the issue I ran into is that there is no standard *TFKB_COLLECT function to pass zfield changes from my my z PAI Function Module. The BDT guide says that the *tablename_Collect should be used to return data from Z PAI. I am curious as to why SAP left out this module, and what are the options I have to return zfields back to SAP. No FM under Function Group FM_FUNCTIONAL_AREA seem be doing this either. We are running ECC 6.0.
(The "Get" module is available, but with a name different than the naming convention - "FMFA_DI_READ_DATA".)
Thanks.

The below mentioned code was answered by one of the members. I am copy pasting this here as i am not aware of how to attach other threads.
use the below code to get spool data into internal table.
data: begin of itab occurs,
data(2000),
end of itab.
SUBMIT rspolst2 EXPORTING LIST TO MEMORY AND RETURN
WITH rqident = 'spool number'
WITH first = '1'
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = mem_tab (table LIKE TABLE OF abaplist.)
IF NOT mem_tab[] IS INITIAL.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
List_index = -1
TABLES
listasci = itab
listobject = mem_tab (LIKE TABLE OF abaplist)
endif.
by the above code you can get the data into internal table itab.

The ways to return data from a stored procedure.

Hi, I know there are three ways to pass out a value from a Microsoft SQL stored procedure, but I have no clear idea what Oracle SP can do, I know Oracle doesn't support multi-recordset(v8), can not return a recordset by a inner select query, but I do know there is a cursor object, which doesn't like its counterpart in Microsoft SQL server, is a choice under most situation. Here I wonder anyone who is good at Oracle can give a list of all ways to return data from a SP, including example is more better, thanks.

Here is a way to get return a record from a function and a procedure. You need to be familiar with Oracle packages as well as stored procedures and functions:
CREATE OR REPLACE PACKAGE EmpPkg AS
cursor cEmp(pEmpno in number) is
select empno, ename, job, hiredate, sal
from emp
where empno = pEmpno;
FUNCTION GetEmployee(pnEmpNo in number) RETURN cEmp%rowtype;
PROCEDURE GetEmployee(pnEmpNo in number, prEmp out cEmp%rowtype);
END;
CREATE OR REPLACE PACKAGE BODY EmpPkg AS
FUNCTION GetEmployee(pnEmpNo in number) RETURN cEmp%rowtype IS
rEmp cEmp%rowtype;
BEGIN
open cEmp(pnEmpNo);
fetch cEmp into rEmp;
close cEmp;
return rEmp;
END;
PROCEDURE GetEmployee(pnEmpNo in number, prEmp out cEmp%rowtype) IS
BEGIN
open cEmp(pnEmpNo);
fetch cEmp into prEmp;
close cEmp;
END;
END;
Here's how you use the package:
DECLARE
rEmp EmpPkg.cEmp%rowtype;
BEGIN
rEmp := EmpPkg.GetEmployee(7782);
dbms_output.put_line(rEmp.ename);
EmpPkg.GetEmployee(7902, rEmp);
dbms_output.put_line(rEmp.ename);
END;
Note that you can return any Oracle data type from a function. Likewise, you can specify any Oracle data type as an out parameter in a procedure. Also, you can make a parameter both an in and an out datatype like this:
PROCEDURE GetEmployee(pnEmpNo in out number);
I hope this puts you in the right direction.
null

TS4036 I added Icloud to join my calendar to another person. It erased all history date from previous months. how do I get that data back?

I added Icloud to join my calendar on my phone to another person. It erased all history date from previous months. how do I get that data back?

i found the answer to the first part: reboot and keep hold of command+r
this gave me a list of options
one of them was to reinstall lion from fresh
i went for this
dont know why... but all forum posts i read said u should delete hard disc? theres an option for this
which is the right option?
any suggesstion where i go to register new mac would be great
thanks

Return data from spark list itemrenderer

Does anybody no how to return data from the itemrender for a spark list. say i had a checkbx in my itemrenderer how can I get that info back to my main component if its selected or not. I looked at datagrid and itemeditor but I really rather use a spark list. Thanks

thanks I also found another way to doing it. A click handler on my list when that fires I can check if checkbx has been selected by doing event.target.document.mycheckBx.selected this will not work if using currentTarget cause it take the info from the itemRenderer. Now I understand the difference between currentTarget and target.
not sure if this is a better way to access the data I think I might still just dispatch a event and do it your way.
Its weird that mx:list has a editItemRenderer and s:list does not
thanks again TK

How configure a primavera web service to return data from the second database?

Hi everyone,
We have P6 with first WS deployed on a single server weblogic domain. The first WS return data from the first database instance.
Then deployed advanced second WS on a separate weblogic domain server with a different port. Configured second WS with <WS2_INSTALL_HOME>/bin/dbconfig.sh, creating a new branch of a configuration that specifies a different second instance of the database. However, this configuration is ignored and second web services return data from the first database.
We have one domain, which including next servers:
Name / Host / Port / Deployments
P6 / localhost / 0001 / P6(v8.3), p6ws1(v8.3)
p6ws2 / localhost / 0002 / p6ws2(v8.3)
Now we have two different file BREBootstrap.xml.
P6 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db1:1521:db1</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass1</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB1" instances="1" logDir="anydir/P6EPPM/p6/PrimaveraLogs"/>
</Configurations>
p6ws2 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db2:1521:db2</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass2</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB2" instances="1" logDir="anydir/P6EPPM/ws2/PrimaveraLogs"/>
</Configurations>
‘P6 Config_DB1’ and ‘P6 Config_DB2’ including Database property for 1 and 2 database respectively.
How to configure a second web service to return data from the second database?
Thanks in advance!
Regards,
Dmitry

OK, so I got this to work this morning with Username Token Profile (with little help from Oracle Support).
I followed your steps 1-4 but in step 2 I didn't add the -Ddatabase.instance=2 because I want to check to see if my code could swap between different instances.
It appears for Username Token Profile to use Database Instance, you need to set it in the soap header.
So my soap request looks like this:
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <s:Header>
        <DatabaseInstanceId xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Authentication/V1">2</DatabaseInstanceId>
        <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
            <u:Timestamp xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3'>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
                <u:Expires>2014-10-23T04:29:01.152Z</u:Expires>
            </u:Timestamp>
            <o:UsernameToken u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3' xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd'>
                <o:Username>admin</o:Username>
                <o:Password Type='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText'>password</o:Password>
                <o:Nonce EncodingType='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary'>vJBQhCc28bAeszej7gOaiC2tVCQ=</o:Nonce>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
            </o:UsernameToken>
        </o:Security>
    </s:Header>
    <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
        <ReadProjects xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Project/V2">
            <Field>ObjectId</Field>
            <Field>Id</Field>
            <Field>Name</Field>
            <Field>Status</Field>
            <Field>StartDate</Field>
            <Field>FinishDate</Field>
            <Field>DataDate</Field>
            <Filter>Id = 'EC00515'</Filter>
        </ReadProjects>
    </s:Body>
</s:Envelope>
This request pulled the project from the second instance.
V/r,
Gene

I want to return data from TreeMap in order from DB

i want to return data from treemap in the order from the db... but it returns it in alphabetical order...

You do realise of course that a TreeMap is a SORTED Map.
It will sort whatever you put into it as you put items into it.
If you don't want the items sorted, don't use a TreeMap.
As suggested, a LinkedHashMap gives you the best of both worlds
I often use a LinkedHashMap, indexed by primary key id, but ordered by something else (name for instance)
- Retains insertion order (by default) for iteration
- Provides the quick access of the Map - by id

A message saying I had to restore my iPad to factory settings came up, can I recover data from previous back-ups?

Tonight, a message came up on iTunes came up saying I need to restore my iPad to factory settings came up. Is there any way I can avoid doing a factory restoration? If not, can I recover data from previous backups?

If you got the message that you need to connect to iTunes, there is no choice now but to restore the iOS software. Yes, you can restore from a backup after you restore the iOS software.
You can only restore now by connecting to your computer and using iTunes, and at the end of the restore process, you will be asked if you want to restore from your iTunes backup to which you will say yes and then sync your iPad as well. Syncing will transfer all of your apps, music, movie, books, photos etc, back to the device. If you do not backup and sync with iTunes, you can still restore from an iCloud backup after you restore the software in iTunes.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

Returning data from child jdialog...problem

Hello
I have a parent form which calls a jdialog. I need to return data from the jdialog.
So i have this class which contains the varaibles i want to set.
public class ProtocolRecordType {
public int num;
public String name;
I from my main i call this class and method. Now i seem to be able to set object values to try and do a pass by reference in teh constructor, but if i use the same variable in a method it says unresolved symbol. Most of the code was generated with netbeans ide.
Can anybody explain this to me ?
Thanks
public class ProtocolsDialog extends javax.swing.JDialog {
/ Creates new form ProtocolsDialog */
public ProtocolsDialog(java.awt.Frame parent, boolean modal, ProtocolRecordType protocol ) {
super(parent, modal);
initComponents();
System.out.println("done constructor");
// public int y=0;
protocol.name="protoname"; <==========setting it here works, i can print this out when it returns to parent frame.
private void Protocol1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
//protocol.name="aaaa";
// ProtocolRecordType.name="";
System.out.println("proto1 selected");
protocol.name=("xxxtest"); +<=================this says cannot find symbol protocol.name+
}

Check out tjacobs.ui.dialogs.ParamDialog and tjacobs.ui.ex.SetupPane in TUS for two easy ways to do this

LR is using meta data from previous edited photos on new imports

LR is using meta data from previous edited photos on new imports-
When I am importing new photos to a new catalog LightRoom gave all the photo settings that I had used on a previous catalogs photo I had to delete the catalog because I could not find an answer anywhere. Tried the deleteing and importing 3 times with same result.
Once I did Start another new catalog and pressed reset on everything I could find it worked.
What can I do if this happens again? Anybody know what setting that involves?

On the right side of the Import screen, there's a heading "Apply during import". (If it doesn't show, right-click on the panel on the right and choose it from the menu.) One of its sub-fields is Metadata. That field and the Keywords field below it, I think are "sticky". You need to make sure that they contain the metadata that you want applied in your current import.
It's almost always a bad idea to delete your catalogue or re-import images. Both those things fall at the very end of possible remedies because they cost you a lot of work, and there are almost always cheaper ways of solving your problem.
Hal

Report 2 returning data from previously ran report 1 - Plus/Viewer

Similar Messages

Maybe you are looking for