Report 6 or 6i For Landscape

Hello,
I have problem in Report6 or Report6i, i want to print report in character mode landscape, i set all the properties related to its landscape and character mode but it still print in potrait format and i used printing definition files but it still print in potrait. So please anyone help and solve my problem.
Note: Printer Name
1. Epson LQ2180
2. HP 6L
null

I set orientation and select but it still print in landscape character mode. When it print in character mode report in portrait format its ok.
I Set and use all the option in report to print in Landscape in character mode.
I ask you please to give me information about the printing definition files and its codes, how to use printer codes. I use two printers
1. Epson LQ2180 2. HP 6L
I used HPLWIDE printing definition files put its still print in portrait format not to print in landscape.
Thanks for corporation
I will wait ur reply...
At this address
[email protected]

Similar Messages

Page Format for landscape/legal paper for ALV Grid report

Hi!
I have a request to set up a particular ALV Grid report as a background job with the report output printing on legal-size paper with landscape orientation. We currently don't have any reports set up to print on legal size paper. What do I need to do to set this up? We currently use X_58_170 or X_65_255 which print on letter-size paper. I cannot seem to find a page format for landscape legal other than LEGAL which seems to be available only for SAPscript or Smart Forms. Any help will be greatly appreciated.
Best Regards,
Nik von Ruden
Edited by: Nik Von Ruden on Oct 8, 2010 1:11 AM

Hi,
Thanks for you reply.
I cannot control left and right margin in PDF. Also, it is a PDF file so eventhough somehow you are able to change left and right margin, the content does not adjust itself to fit the legal page (as it does in word or excel).
Let me know if there is any other option.
Thanks,
RS

Landscape Verification-The data needed for landscape verification is missin

HI experts,
I've successfully installed Landscape Verification 1.0 for my SAP Solution Manager 7.0 EhP1 SP20.
Then I added the role SAP_SMSY_LV_ALL of users and triggered transaction LVSMLOAD_. But the background task runs only 1 minute. OK, then run the transaction LVSM and shows the error:
The data needed for landscape verification is missing or incomplete (33 % available).
Already met someone with this error?
THX

Hello Miroslav,
There are a few notes you should check
1484609 LVSM: Error corrections for product instance recognition
1485671 No systems displayed in Landscape Verification tool
1501586 Link to error message display is not working
1506251 Shortdump in IF_E2ELV_ADAPTER_PPMS~GET_TEXT_FOR_PVINST
1506730 Corrections for Product Instance Detection (LVSM_LOAD)
1510273 Incorrect product instance detection status reported
1511818 Relevant product instances not included in detection
1516332 Corrections for system factorization and guessing
1517258 Dual stack systems are not recognized correctly
1525078 LVSM:No product instance detection for TREX/LiveCache system
1528030 Inconsistent display of systems and landscape pattern
Hope this helps.
Regards,
Paul

Report Open balance for Customers back in time

Dear All,
I would like to have a question: How can I report Highest Balances for Customers back in time? So I have to list Date and Amount, in the last one year, when Customers had their Highest Balances (highest outstanding amount). I have a transaction that can show actual status but I cannot report it for a long period in the past.
Does anyone have an idea how could I do it?
It would be very helpful.
Thank you!
A.

Hello,
Solution Manager does not desal with Customer Balances. Perhaps you wanted one of the banking industry forums, or FI AR/AP?
In any event this question will not help you much in this forum.
Regards,
Paul

Classic report - Condition evaluated for every row

APEX 4.2.2
I am seeing something strange in a classic report region. A report started to fail at run-time with a strange error about bad syntax. When I run the page in debug mode, I see the following
print column headings
rows loop: 30 row(s)
...Execute Statement: begin wwv_flow.g_boolean := '' is not null;
end;
......Result = false
...Execute Statement: begin wwv_flow.g_boolean := '' is not null;
end;
......Result = false
...Execute Statement: begin wwv_flow.g_boolean := 'string with a embedded ' single quote' is not null;
end;
......Result = true
Looks like the APEX engine is evaluating a boolean expression after rendering and each and every row in the report. And for some strange reason, it is using a piece of data from my query's resultset and failing because of the bad syntax introduced due to the single-quote in the string.
I have never seen this before. Any idea what is going on?
Thanks

Howdy Paul, sorry should have provided all the details. No, this is a standard generic column template. Ah, you are right, drat I should have looked closer. The template has use a condition to show either a highlighted row or normal one. Sorry for the false alarm, I can take it from here. Enjoy your flight :-)

How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreet

Hi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi ‏23 KB

SharePoint Foundation 2013 - report / chart / Graph for Employee vacation.

In SharePoint Foundation 2013 I want to create a report / chart / Graph for Employee (Employee Id,Employee Name & Department) which will show month wise from which date to which date Employee are on vacation in particular department.
I'm thinking to create one List where where user will enter there vacation details and from that list report I will create chart / Graph Department wise to check the Employees availability.
Please provide some good example or idea in detail for this.

Hi,
Chart Web Parts are useful for visually representing data in line charts, bar charts, and other views. Charts enable you and other users to view performance information at a glance.
In SharePoint 2013, chart web part is one of the discontinued features. We usually use Excel Service to replace it, however, Excel Service is only available in Enterprise edition, so we need to figure out coding methods or third party tool if you are using
Foundation edition.
Here are some links for workaround in your situation, please check if they can be help:
http://sivarajan.me/post/SharePoint-2013-Chart-WebPart-Using-HTML-5-RGraph-with-WCF-REST-Services
http://charts4sharepoint.codeplex.com/
Regards,
Rebecca Tu
TechNet Community Support

Discoverer report been refreshed for all users

Hi,
We have created few reports in discoverer. These reports are been ported on to the portal.
Totally there are almost 30 portal users. The problem i am facing is the report gets refreshed for all the portal users, due to which we are facing the performing issue. How can restrict a specific report which will refresh only for few users and not for all 30 portal users
Thanks in advance
Vishwanath

Generic, try create as many discoverer portlets as type of refresh you need. and grant access on this portlets for appointed users

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

Report Generation toolkit for labview 2010

H All.
I'm looking to download the report generation toolkit for labview 2010. When I proceed to download the toolkit from the national instrumnets website, it says that i need to labview 2011 or later in order to install it.
Is there a version of this report generation toollkit for labview 2010 and can someone provide a link maybe??.
Thanks for reading.
Solved!
Go to Solution.

Try this: [Link removed, NI software downloads can be found on ni.com/downloads, the LabVIEW 2010 Report Generation Toolkit is available to customers with Standard Service Program here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other customers may contact NI directly]
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Add Report Generation toolkit for Microsoft Office in exe

Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi ‏132 KB
Untitled Project 1.zip ‏3841 KB

Hi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG ‏92 KB

LV Report Generation Toolkit for Microsoft Office says "This VI or item belongs to a library that is expired or invalidly licensed"

I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.

Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit?

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

Control checkbox form field in word with report generation toolkit for Microsoft office

Hi all,
Happy New Year!
I insert in the word template the check box form field. It has a bookmark name "Check1".
Now I'm trying to checked or unchecked this field using the report generation toolkit for Microsoft office and I couldn't. If anyone now how to do it? I'm using LabView 8.0
Thanks in advance,
Boris
Solved!
Go to Solution.

Boris,
The Microsoft Office Toolkit does not have support for checking/unchecking check box forum field. You would have to research the activex functionality that enables this to be checked or unchecked and then do the activex calls yourself. I did hear of one csutomer who used a special font to write a blank box or a checkbox into a word document and changed it that way as well.
Maybe http://www.ozgrid.com/forum/showthread.php?t=53715 gives a hint to an activex reference
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.

The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htm

It is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.

Report 6 or 6i For Landscape

Similar Messages

Maybe you are looking for