Report-6i Drill Down Problem

Hi,
I have problem, while running master report, and press button(for drill down), it is showing error
"Unable to open file moddet.rdf"
Procedure Button:
SRW.RUN_REPORT('moddet.rdf mode='||:p_Style||' paramform=no
p_deptno="'||:deptno||'"');
Thanks for advance help!!
Regards,

Hello,
Do you know if the file moddet.rdf is in a directory belonging to the list of directories set in REPORTS60_PATH ?
Regards

Similar Messages

REPORT PAINTER DRILL DOWN REPORT

Hi,
i need to develop report painter report with drill down for cost elments and month wise
out should be cost elements and all months
Please suggest how to use drill down
Thanks and Regards
RAVi

Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
Mark

What is the difference in Interactive reports and Drill down reports?

What is the difference in Interactive reports and Drill down reports? Are they same?

Hi FRD ,
Both are same .
as far as i know there is no difference .
bye .

How to insert "%" into the report figure in report painter/ drill down

Please kindly advice how to insert "%" in the calculated amount in the report painter/ drill down report.
Thank you
Sirirak

Hi,
Create a text variable (for query name, option available in query properties).
Processing Type would be Replacement path, replace with variable.
Give the variable name created for the selection box characteristic in 'Replace with variable' option.
This would replace value of the text variable with the user input value.
Hope this helps!

Drill down problem

Hi ALL
I hv a question that in repository i hv month name & month code in periods table.
and i set drill down on month name and month code as a level key.
but when i take month code in report then drill down is possible on month code.
i want to know, why is it happening?
Regards,
SAP

Hi SAP,
When you set the level key, you have to uncheck the use for drill down check box to disable the drill down .
Now go to the logical level key properties and uncheck it.
Thanks,
Vino

Drill Down Problem in Report

Hi,
I am using the product hierarchy in the report and its used for drilling down. when i say drilldown the report is not working and TIME OUT warning is coming.
I have run the same report in quality system which contains more or less the same data. it works fine. all the packages are same in both the systems ?
any one have an idea of why its behaving like that?
Best Regards
Bhav

Bhavani,
Welcome to SDN ...
what is the timeout set in the servers .... Check in your Quality systems for the profile settings in RZ10 for the timeout setting and have the same in the other server as well..
otherwise leave it blank if you do not want any time out.
Arun
Assign points if useful
Message was edited by:
Arun Varadarajan

Cash Management Report FF7B - drill-down from planning levels to AP/AR OIs

Hi
I'm configuring cash management and have created all planning levels and groups needed.
All master data, ie GL accounts, vendors and customers, have the correct planning level or group.
I've created all the groupings etc that I need.
I'm running the reports FF7A and FF7B. I have two questions and problems.
1. When running the Liquidity Forecsat for customers and vendors I drill-down to the standard PL or SL planning levels for AP and AR postings respectively. Then I drill into the planning groups correctly (E1-E9 and R1-R8). But when I try to drill into the cash management detail records (or is it the AP/AR line items?) I get "Memo Records: List - List Contains No Data". This happens every time. Should I now see the AP or AP line items? Or should I see some cash management memo records? I have deleted all the cash management data several times and recreated but I still get this problem (using reports RFFDDL00 and RFFDKU00)
When I do the same for purchase orders, purchase requisitions or sales orders I see a Memo Records List which agrees with the previous planning level total and I can then drill into the actiual POs, PRs or SOs from this list without an issue.
2. When running the Cash Position and I do the drill-down to the GL Line Items, I get an enormous list which does not just show the total of items at the previous planning level. Why is this please? Example: a bank account with a balance of £2,000 (shown on the panning level) but with 000's of line items totalling say £5m. Again I have deleted the CM data and recreated but without any improvement to the problem.
Any help anyone can give me with these issues will be very much appreciated.
Thanks.
Wayne

Hi
I have the same trouble with Tcode FF7B. There´s a message "Memo Records: List - List Contains No Data"; bit in the TcodeFF7A, it runs OK. The message appears just witn Tcode FF7A.
Also, There´s all TR data in tables FDSB for GL accounts, FDSR and FDFIEP for customers/vendors.
Can you help me?? can you solved this issue?
Tanks for your Help

SAP Report Painter (Drill down)

Hi, SAP Experts,
I'm Henry. This is my first post on SCN.
I'm trying to solve a problem on drill down report of report painter.
I don't have much experiences. I really need your help.
The problem is that I developed one report painter (Balance Sheet) and one query (Line item report by account code).
I put the query on the report painter as drill down report. So, when I click a row on the report painter,
It should go to the query and see appropriate data on it.
However, somehow, company code is NOT copied to the query. Therefore, the result is the query shows all compnies data.
*My client has several compnay codes.
<Example>
[Selection field on the report painter (BS)]
   *Table: FAGLFLEXT
   1. Company code: "A1"
   2. Fiscal Year: "2014"
   3. Fiscal Month: "3"
[Selection field on the query (Line item report by account code)]
   *Logical DB: SDF
   1. Company code: blank (This is the problem. I need to know why the company code isn't copied)
   2. Account code: xxxxxxxxx (The account code is copied from the report painter. This is no problem.)
   3. Fiscal Year: "2014" (No problem)
   4. Fiscal Month: "3" (No problem)
   *After clicking a row on the report painter, I can see all companise data on the query. The query should give only one company which is selected.
If you have any solution or knowledge, could you please share it with me?
If you give me some advice, I would really appreciate it.
Best Regards,
Henry

Hiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki

Inconsistency in upper level report and drill down report

I have to reports:
1) Higher level report pulls data against customers and shows aggregated data for all promotions for that customer from a table A.
2) Lower level report pulls data from the same table A, but for all promotions against a customer after i drill down on a Customer.
However, the values of a measure when summed up for a customer in the higher and lower level reports, does not match sometimes. Sometimes its in sync, sometimes its not.
My Oracle BI servers are 2 in no. with clustered configuration. Can this be an issue related to caching of measure values? If not, please give me pointers in other directions i can look.

clustering is not a problem here....just check for some example...and do some unit testing to find the rootcause of mismatch..it might be including some some extra values..

Viewing reports with Drill Down option

Hi all, here is the complaint that we received:
Please try to find a means to help!
When I’m in my Report and when in an account and I go to a deal to alter or look at it, when I return to reports I always am driven back to the top of the report file. If I’m in December and looking at the entire year I have to go through all accounts once again to get to the same starting point. A great irritant. I can’t help but think that there is a better way.
Anyone know if this can be changed? Thank you in advance!!!

Sorry, let me explain...
The problem isn't with the report, they have issues with what happens after you drill down into the account from the report and go back to the report.
When they go back to the report after adjusting the account/opp it doesn;t go back to what they were looking at, the view will go to the top of the report. Say they were looking at Account #100 out of 250 (250 total accounts in the report), if they drill down into account 100 and then go back to the report they will be taken back to account #1.
Is that more clear?
What they want is to be able to go back to the view of Account #100.

Drill down problem when execute CR Viewer from Sap Web Application Server

Hello,
We are using Sap Was 7.01.
The report viewer jar files deployed to the j2ee engine , and I am using j2ee servlet application to execute the report.
Everything works OK, but when I am trying to drill down to the next sub report the screen become blank.
I checked with httpwatch and it seems that there is no response from the server , after DD.
The web.xml file look like this:
<web-app>
     <display-name>WEB APP</display-name>
     <description>WEB APP description</description>
     <context-param>
       <param-name>crystal_image_uri</param-name>
       <param-value>./CrystalReports/crystalreportviewers</param-value>
      </context-param>
      <context-param>
       <param-name>crystal_image_use_relative</param-name>
       <param-value>server</param-value>
      </context-param>
      <context-param>
       <param-name>crystal_servlet_uri</param-name>
       <param-value>/CrystalReportViewerHandlers</param-value>
      </context-param>
     <servlet>
          <servlet-name>CrystalReportViewerServlet</servlet-name>
          <servlet-class>com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet</servlet-class>
    </servlet>
     <servlet>
          <servlet-name>reportviewerClient.jsp</servlet-name>
          <jsp-file>/reportviewerClient.jsp</jsp-file>
     </servlet>
     <servlet>
          <servlet-name>ReportViewerSrvlt1</servlet-name>
          <servlet-class>com.illumiti.demo.ReportViewerSrvlt1</servlet-class>
     </servlet>
    <servlet-mapping>
          <servlet-name>CrystalReportViewerServlet</servlet-name>
          <url-pattern>/CrystalReportViewerHandler</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>ReportViewerSrvlt1</servlet-name>
          <url-pattern>/jRun</url-pattern>
     </servlet-mapping>
</web-app>
There are no javascript errors and I can see that the following JS files exist on the browser cache:
allInOne.js
allStrings_en.js
crv.js
Also the dynamic rendering of the graphic objects working, for exampale:
http://sapdevpor.themigroup.net:52000/ReportViewerNwds/CrystalReportViewerHandler?dynamicimage=crystal1258027361240644774257355486184.png
sapdevpor is the Sap application server.
Need help with this asap.
Thanks
Nir

Hello,
to which directory have you unzipped the Files? I would suggest C:\temp because there are problems with long filenames. Have you tried to reboot and then disconnect Drive M:?
Regards
Gregor

Drill down problem when using union all combination

Hi All,
I have a simple report with a drill down. The report has three columns Region, Sales, Flag... which will drill down to detail level of sales. The Flag column has Y, N values and we added 'All' Value in flag so that the user can select Y, N and All from the table prompt in the report . We have used union all in the report using combination to add the ' All ' Value in the flag. The problem is that now the main report is not passing the Flag values to the detail report. Flag is prompted in the filter in detail report.
If I remove the 'All' value from Analysis with only Y N selection criteria the drill down works.
Is there any work around? I have to use table prompt and All value selection in flag for drill down.
Thanks,
Virat

The problem is without union all when doing combination of analysis drill down works, when I use combination drill down does not work because it does not pass the parameters for flag . I have used union all to add All value in flag.

Drill down problem in EC-CS when moved 4.7c to ECC 5.0

Hi
We are still using EC-CS and upgraded to ECC 5.0.
We have customised report for consolidated BS and income.While running the report thru GR55, we come across a screen ( during drill down ) which is like CX34, we can see that the dimension and version field is blank.We fill the values and excute , get error that "local currency of cons unit 123xx is not maintained " . Now we run cx34 in another session, populate the dimension , version etc. Go back to the report and there is no error. Has any one faced similar problem ?
Thanks in advance
Satya
Edited by: satya kantiwal on Dec 17, 2007 5:10 PM

I have used the GR55 reports to compare the extracted data in BCS with R/3.
Why he can not access the transaction code.. ask him to contact security admin to resolve it.

Drill down problem using 0FISCPER3

Hi expert!
I try to explain my BEX problem.
I have a query where in column there are two restricted keyfigures and 0FISCPER3.
Both Kfigures are filtred by 0fiscper3 range variable. This variable is entered by user input.
<b>kfigure 1</b> --> 0fiscper3: from value 1 to variable value;
<b>kfigure 2</b> --> 0fiscper3: from variable value+1 to value 12.
When I run the query, filter on an individual 0fiscper3 value and then drill down a characteristic, the report miss the value and end up with "not data found", even if the data is existing.
thanks a lot.
C.
Message was edited by:
claudia martini

Hi,
Could you give us more details on the layout of your query and the drill down ?
Cheers,
Nicolas

EC_CS drill down problem

Hi
We are still using EC-CS and upgraded to ECC 5.0.
We have customised report for consolidated BS and income.While running the report thru GR55, we come across a screen ( during drill down ) which is like CX34, we can see that the dimension and version field is blank.We fill the values and excute , get error that "local currency of cons unit 123xx is not maintained " . Now we run cx34 in another session, populate the dimension , version etc. Go back to the report and there is no error. Has any one faced similar problem ? This problem was not there in 4.5 , it only started after migrating to ecc.Gurus kindly shed some light on cx34 mistry.
Thanks in advance
Satya

Dear Satya,
could you please check in tabe TF164 whether the currency indicator is really missing for any cons unit? (use no selection to dimension or version).
If it did not help, what is the error message number?
Cheers,
David

Report-6i Drill Down Problem

Similar Messages

Maybe you are looking for