Report after improper shutdown never works (ok, worked twice)

Hi,
In the past three years, after 62 freezes, 10 kernal panics and other problems, I got my second window from the OS after rebooting, that says something like, the system did not shut down properly; would I like a report (or report it to Apple)? I clicked on report. Nothing happened. This has happened one time before. It too did nothing. I remember in the old OS 9 days that I would get messages all the time when recovering from a freeze, that the OS hadn't been shut down properly.
Shouldn't this work? Does it work for anyone else? As I say, It has only shown up twice in the past three years despite all these freezes that have caused the OS to not be shut down properly.
(I am a page or two away in my computer diary from posting more on all the freezes, kernal panics and other OSX problems I've had in the past three years. That will be a separate post.)
Thanks for any info.
John L

No, the computer was not being used during the last 3 freezes (and 1 kernal panic). I couldn't tell what time it froze last night but I had gone to bed, so some time between 1 and 9am. Previous to that, it froze at 5:42 am on Tues, 5/6, had a kernal panic at 3:56 am on Sun, 5/4 and froze when I was awake but not using it on Thurs, 4/24. Other recent freezes before these took place while I was using it for various things for at least a few of them, not going back too far...
It is online all the time. I just dim the screen, mute it and close all apps when I go to bed. OSX's firewall is always on and internet sharing always off.
I've looked into this in the past and never got too far. Things would clear themselves up soon enough. While I would like to minimize these problems, I will post a thread on this when my diary fills up, a few pages from now. So, we can wait 'til that happens to really dig into it.
I'd be curious if others have problems with this "report" thing.
Cheers and thanks.
John L

Similar Messages

  • Unable to execute update commands after improper shutdown

    Hi!
    It sounds a little strange.
    I am unable to execute update commands from my application. My machine was shutdown improperly. Then I loaded the datastores again. I was able to execute select commands but unable to execute update commands. It was working fine before shutdown.
    Regards
    /Ahmad

    Hi Chris!
    SQLExecute method of ODBC is returning -1.
    I have checked the syntax of the query its also correct. I am also very confused on it why is this happening. If I execute the update command from ttisql it works ok.
    The code is the same that we discussed in our previous conversation.
    The steps I did after improper shutdown:
    1. Started TimeTen daemon >ttdaemonadmin -start
    2. Loaded the Data store >ttAdmin -ramLoad spiderM
    3. Executed the code
    The output of ttstatus is as follows:
    TimesTen status report as of Fri Jun 29 21:45:41 2007
    Daemon pid 8273 port 17001 instance tt70
    TimesTen server pid 8284 started on port 17003
    TimesTen webserver pid 8280 started on port 17005
    Data store /tmp/spiderM
    There are 6 connections to the data store
    Data store is in shared mode
    Shared Memory KEY 0x08004f3c ID 557070
    Type PID Context Connection Name ConnID
    Subdaemon 8278 0x0000000000570520 Worker 2042
    Subdaemon 8278 0x00000000005dc4d0 Flusher 2043
    Subdaemon 8278 0x000000000060d5d0 Checkpoint 2044
    Subdaemon 8278 0x000000000063e5a0 Aging 2045
    Subdaemon 8278 0x000000000066f570 HistGC 2046
    Subdaemon 8278 0x00000000006a0430 Monitor 2047
    RAM residence policy: Manual
    Data store is manually loaded into RAM
    Replication policy : Manual
    Cache agent policy : Manual
    Data store /usr/users/spider/TimesTen/tt70/info/TT_tt70
    There are no connections to the data store
    Replication policy : Manual
    Cache agent policy : Manual
    Access control enabled.
    End of report
    Regards
    /Ahmad

  • Boot fails after improper shutdown

    A few months ago, my Powerbook G4 Titanium began failing to boot into 10.4 after any improper shutdown---power failure, force restart, etc.
    It would begin booting, the little circle would start to spin, and then the thing would just shut off. No error, no message.
    The only solution was to pull out my Norton Systemworks CD, use it to boot into OS9, and then restart into 10.4.
    Any help in figuring out what's up would be greatly appriciated.

    Norton Systemworks was actually probably the cause at one point. It is not compatible with Mac OS X in its Disk Doctor or Speed Disk module.
    You should only use these utilites:
    1. A backup utility before any other as my backup FAQ says:
    http://www.macmaps.com/backup.html
    2. And if your data is backed up and won't boot after an improper shut down, try repairing your directory with utilities known to work as my FAQ explains:
    http://www.macmaps.com/directoryfaq.html
    The only elements of Systemworks that are even remotely safe for use with Mac OS X are Retrospect for backup, and Anti-virus for locating Windows viruses on your Mac that you may transfer to Windows users. Everything else, you should throw away from the Systemworks bundle.

  • Macbook air doesn't wake up after improper shutdown

    Hi guys,
    I've had this issue for couple times in the past 8 months.
    I've consulted Apple support but doesn't seem helpful at all.
    They took my MacBook Air for invenstigation for over a week and returned and concluded no issue found.
    Hence I had to consult genius on the forum.
    I seldomly had this issue, my MacBook Air 2012 just shuts while it's in use, or while it's asleep, and I couldn't wake it up.
    It looked like dead and nothing turned it back on, keyboard nor pwoer button.
    I could only to wait for another 10 or 15 minutes, and then press the power button again.
    Usuallys it comes back from a restart and return to the login menu.
    After I log in, it shows there was an inproper shutdown.
    This kinda annoys me as I don't know if there's going to be any potential issue after my warranty expires. (still 4 months left)
    After suggestion would be much appreciated.

    Hi all,
    Thanks for the help. Sorry for the late reply as I was away from Internet access for the past week.
    I couldn't reproduce this at will. It happened again this morning.
    I was pretty sure I had the power connected, lid closed and connected to my HDMI monitor and USB mouse and keyboard. I left the MacBook Air on when I went to bed, and I had power went sleep after an hour in the energy setting.
    When I resumed my computer by pressing keys couple of times (strange, it doesn't wake my computer up with one press) on my USB keyboard, my computer went straight into the login screen. I knew it was shutting down again.
    I just did reset SMC but I don't think it helps. I'll monitor it for another week.
    I did have the crash log and will send to Apple Support for further investigation.
    I'll post it here just in case anyone is interested.
    Date/Time:       2014-03-09 08:53:20 +0800
    OS Version:      10.9.2 (Build 13C64)
    Architecture:    x86_64
    Report Version:  18
    Event:           Sleep Wake Failure
    Steps:           45
    Hardware model:  MacBookAir5,2
    Active cpus:     4
    Powerstats for:  kernel_task
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 28 samples
    Primary state:   28 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 28 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 28 samples Unknown
    *28 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
       *5  ??? (mach_kernel + 2304605) [0xffffff8000432a5d]
         *5  msleep + 114 (mach_kernel) [0xffffff80005e1802]
           *5  ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
             *5  lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
               *5  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                 *5  ??? (mach_kernel + 223627) [0xffffff800023698b]
                   *5  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *4  ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 40348) [0xffffff7f820dfd9c]
         *4  msleep + 114 (mach_kernel) [0xffffff80005e1802]
           *4  ??? (mach_kernel + 4068730) [0xffffff80005e157a]
             *4  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
               *4  ??? (mach_kernel + 223627) [0xffffff800023698b]
                 *4  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *3  pmSlaveIdleThread + 16 (AppleIntelCPUPowerManagement) [0xffffff7f81cde310]
         *3  slave_block + 37 (AppleIntelCPUPowerManagement) [0xffffff7f81cde2f3]
           *3  lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
             *3  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
               *3  ??? (mach_kernel + 223627) [0xffffff800023698b]
                 *3  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *2  ??? (mach_kernel + 2288286) [0xffffff800042ea9e]
         *2  msleep + 114 (mach_kernel) [0xffffff80005e1802]
           *2  ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
             *2  lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
               *2  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                 *2  ??? (mach_kernel + 223627) [0xffffff800023698b]
                   *2  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *2  ??? (mach_kernel + 303674) [0xffffff800024a23a]
         *1  IOService::watchdog_timer_expired(void*, void*) + 39 (mach_kernel) [0xffffff8000698f97]
           *1  IOPMrootDomain::sleepWakeDebugTrig(bool) + 503 (mach_kernel) [0xffffff80006e7437]
             *1  stack_snapshot_from_kernel + 123 (mach_kernel) [0xffffff80005b03fb]
         *1  IOService::pmDriverCallout(IOService*) + 60 (mach_kernel) [0xffffff80006990fc]
           *1  IOPMrootDomain::willNotifyPowerChildren(unsigned long) + 15 (mach_kernel) [0xffffff80006df71f]
             *1  IOHibernateSystemSleep + 1293 (mach_kernel) [0xffffff800067ed8d]
               *1  hibernate_setup + 68 (mach_kernel) [0xffffff8000256304]
                 *1  ??? (mach_kernel + 2028140) [0xffffff80003ef26c]
                   *1  vfs_iterate + 266 (mach_kernel) [0xffffff80003ddeaa]
                     *1  ??? (mach_kernel + 1985395) [0xffffff80003e4b73]
                       *1  VFS_SYNC + 198 (mach_kernel) [0xffffff80003fa506]
                         *1  ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 99186) [0xffffff7f820ee372]
                           *1  vnode_iterate + 557 (mach_kernel) [0xffffff80003d8a9d]
                             *1  ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 99339) [0xffffff7f820ee40b]
                               *1  ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 105619) [0xffffff7f820efc93]
                                 *1  msleep + 114 (mach_kernel) [0xffffff80005e1802]
                                   *1  ??? (mach_kernel + 4068730) [0xffffff80005e157a]
                                     *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                                       *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
                                         *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
         *1  ??? (mach_kernel + 223264) [0xffffff8000236820]
           *1  ml_set_interrupts_enabled + 27 (mach_kernel) [0xffffff80002d650b]
       *1  ??? (mach_kernel + 328449) [0xffffff8000250301]
         *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
           *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
             *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  mapping_replenish + 402 (mach_kernel) [0xffffff80002c8422]
         *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
           *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
             *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  pmInitThread + 939 (AppleIntelCPUPowerManagement) [0xffffff7f81cdebc1]
         *1  pmSpawnThreads + 172 (AppleIntelCPUPowerManagement) [0xffffff7f81cde739]
           *1  pmMasterIdleThread + 14 (AppleIntelCPUPowerManagement) [0xffffff7f81cdebee]
             *1  master_wait_for_forced_idle + 51 (AppleIntelCPUPowerManagement) [0xffffff7f81cde3ca]
               *1  lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                 *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                   *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
                     *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  idle_thread + 24 (mach_kernel) [0xffffff8000237908]
         *1  processor_idle + 170 (mach_kernel) [0xffffff80002375ba]
           *1  machine_idle + 478 (mach_kernel) [0xffffff80002dd76e]
       *1  ??? (mach_kernel + 2301917) [0xffffff8000431fdd]
         *1  msleep + 114 (mach_kernel) [0xffffff80005e1802]
           *1  ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
             *1  lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
               *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                 *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
                   *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  ??? (mach_kernel + 4436498) [0xffffff800063b212]
         *1  mach_msg_receive + 162 (mach_kernel) [0xffffff800021df22]
           *1  ipc_mqueue_receive + 66 (mach_kernel) [0xffffff80002168e2]
             *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
               *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
                 *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  ??? (mach_kernel + 4401402) [0xffffff80006328fa]
         *1  msleep + 114 (mach_kernel) [0xffffff80005e1802]
           *1  ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
             *1  lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
               *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                 *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
                   *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  ??? (mach_kernel + 2288484) [0xffffff800042eb64]
         *1  msleep + 114 (mach_kernel) [0xffffff80005e1802]
           *1  ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
             *1  lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
               *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                 *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
                   *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 31744) [0xffffff7f820bfc00]
         *1  msleep + 114 (mach_kernel) [0xffffff80005e1802]
           *1  ??? (mach_kernel + 4068409) [0xffffff80005e1439]
             *1  lck_mtx_sleep_deadline + 87 (mach_kernel) [0xffffff800022d257]
               *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                 *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
                   *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 25015) [0xffffff7f820be1b7]
         *1  ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 30380) [0xffffff7f820bf6ac]
           *1  sock_receive_internal + 369 (mach_kernel) [0xffffff800062fea1]
             *1  soreceive + 2306 (mach_kernel) [0xffffff8000614fa2]
               *1  sbwait + 297 (mach_kernel) [0xffffff800061aea9]
                 *1  msleep + 114 (mach_kernel) [0xffffff80005e1802]
                   *1  ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
                     *1  lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                       *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                         *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
                           *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
       *1  ??? [0xffffff7f8213de99]
         *1  ??? [0xffffff7f8214d4c3]
           *1  ??? [0xffffff7f8213ddbb]
             *1  thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
               *1  ??? (mach_kernel + 223627) [0xffffff800023698b]
                 *1  machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
    *0xffffff7f81cd8000 - 0xffffff7f81cf5ff3  com.apple.driver.AppleIntelCPUPowerManagement 216.0.0 (216.0.0) <70947979-EA9B-39D1-AD15-CDAB19F031AF> /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/App leIntelCPUPowerManagement
    *0xffffff7f820b8000 -                ???  ??? <4158E96F-9D53-3BF9-8F75-674C1475EC8F>
    *0xffffff7f820d6000 -                ???  ??? <BD701679-9DF1-3F30-9AF1-526277C33E87>
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  fseventsd
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 3 samples
    Primary state:   3 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 3 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 3 samples Unknown
    *3 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *3 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *2 lstat64 + 156 (mach_kernel) [0xffffff80003e936c]
           *2 ??? (mach_kernel + 2035890) [0xffffff80003f10b2]
             *2 namei + 1460 (mach_kernel) [0xffffff80003d51e4]
               *2 lookup + 603 (mach_kernel) [0xffffff80003d588b]
                 *2 VNOP_LOOKUP + 75 (mach_kernel) [0xffffff80003fcecb]
                   *2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 26592) [0xffffff7f820dc7e0]
                     *2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 115631) [0xffffff7f820f23af]
                       *2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 10995) [0xffffff7f820d8af3]
                         *2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 9816) [0xffffff7f820d8658]
                           *2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 54226) [0xffffff7f820e33d2]
                             *2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 53234) [0xffffff7f820e2ff2]
                               *2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 51978) [0xffffff7f820e2b0a]
                                 *2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 50013) [0xffffff7f820e235d]
                                   *2 ??? (mach_kernel + 4150359) [0xffffff80005f5457]
                                     *2 ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 6851) [0xffffff7f820b9ac3]
                                       *2 ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 18163) [0xffffff7f820bc6f3]
                                         *2 msleep + 114 (mach_kernel) [0xffffff80005e1802]
                                           *2 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
                                             *2 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                                               *2 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                                                 *2 ??? (mach_kernel + 223627) [0xffffff800023698b]
                                                   *2 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
         *1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
           *1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
             *1 ??? (mach_kernel + 2137655) [0xffffff8000409e37]
               *1 tsleep + 92 (mach_kernel) [0xffffff80005e189c]
                 *1 ??? (mach_kernel + 4068730) [0xffffff80005e157a]
                   *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                     *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                       *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
    *0xffffff7f820b8000 -                ???  ??? <4158E96F-9D53-3BF9-8F75-674C1475EC8F>
    *0xffffff7f820d6000 -                ???  ??? <BD701679-9DF1-3F30-9AF1-526277C33E87>
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  revisiond
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 2 samples
    Primary state:   2 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 2 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 2 samples Unknown
    *2 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *2 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
           *1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
             *1 ??? (mach_kernel + 2045285) [0xffffff80003f3565]
               *1 VNOP_READ + 225 (mach_kernel) [0xffffff80003fd9b1]
                 *1 spec_read + 253 (mach_kernel) [0xffffff800040ca8d]
                   *1 cdev_read + 99 (AppleFSCompressionTypeDataless) [0xffffff7f81fbf9ab]
                     *1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
                       *1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
                         *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                           *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                             *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                               *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
         *1 fsctl + 282 (mach_kernel) [0xffffff80003ee7ca]
           *1 ??? (mach_kernel + 2026349) [0xffffff80003eeb6d]
             *1 ??? (mach_kernel + 2034267) [0xffffff80003f0a5b]
               *1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
                 *1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
                   *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                     *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                       *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                         *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
    *0xffffff7f81fbe000 - 0xffffff7f81fbfff7  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 56 (1.0.0d1) <39250897-347B-3440-9AA4-DD9E2F057F42> /System/Library/Extensions/AppleFSCompressionTypeDataless.kext/Contents/MacOS/A ppleFSCompressionTypeDataless
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  launchd
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *1 sync + 23 (mach_kernel) [0xffffff80003e4b17]
           *1 vfs_iterate + 266 (mach_kernel) [0xffffff80003ddeaa]
             *1 ??? (mach_kernel + 1985395) [0xffffff80003e4b73]
               *1 VFS_SYNC + 198 (mach_kernel) [0xffffff80003fa506]
                 *1 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 99186) [0xffffff7f820ee372]
                   *1 vnode_iterate + 95 (mach_kernel) [0xffffff80003d88cf]
                     *1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
                       *1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
                         *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                           *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                             *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                               *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
    *0xffffff7f820d6000 -                ???  ??? <BD701679-9DF1-3F30-9AF1-526277C33E87>
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  securityd
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
           *1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
             *1 ??? (mach_kernel + 2045285) [0xffffff80003f3565]
               *1 VNOP_READ + 225 (mach_kernel) [0xffffff80003fd9b1]
                 *1 spec_read + 253 (mach_kernel) [0xffffff800040ca8d]
                   *1 ??? (mach_kernel + 3836905) [0xffffff80005a8be9]
                     *1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
                       *1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
                         *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                           *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                             *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                               *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
             0x10a5e0000 -        0x10a69aff7  securityd (55199.2) <24B2717F-5436-3EC4-B212-34D13427025B> /usr/sbin/securityd
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  coreservicesd
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
           *1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
             *1 ??? (mach_kernel + 2137655) [0xffffff8000409e37]
               *1 tsleep + 92 (mach_kernel) [0xffffff80005e189c]
                 *1 ??? (mach_kernel + 4068730) [0xffffff80005e157a]
                   *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                     *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                       *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  authd
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
           *1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
             *1 ??? (mach_kernel + 2045285) [0xffffff80003f3565]
               *1 VNOP_READ + 225 (mach_kernel) [0xffffff80003fd9b1]
                 *1 spec_read + 253 (mach_kernel) [0xffffff800040ca8d]
                   *1 ??? (mach_kernel + 3836905) [0xffffff80005a8be9]
                     *1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
                       *1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
                         *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                           *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                             *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                               *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
             0x1085da000 -        0x1085f1ffb  com.apple.authd 1.0 (55471.14) <BC5ADE5F-6EF4-3B5D-AF34-046E74CF1CAE> /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/authd.xpc/ Contents/MacOS/authd
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  stackshot
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *1 __sigwait_nocancel + 480 (mach_kernel) [0xffffff80005ddd70]
           *1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
             *1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
               *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                 *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                   *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                     *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  mtmd
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *1 fsctl + 282 (mach_kernel) [0xffffff80003ee7ca]
           *1 ??? (mach_kernel + 2026349) [0xffffff80003eeb6d]
             *1 ??? (mach_kernel + 2034267) [0xffffff80003f0a5b]
               *1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
                 *1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
                   *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                     *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                       *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                         *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  mds
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
           *1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
             *1 ??? (mach_kernel + 2137655) [0xffffff8000409e37]
               *1 tsleep + 92 (mach_kernel) [0xffffff80005e189c]
                 *1 ??? (mach_kernel + 4068730) [0xffffff80005e157a]
                   *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                     *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                       *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
             0x1067c1000 -        0x10691efff  mds (800.23) <617609E5-A375-3F8D-9A34-B56A5B28837F> /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Support/mds
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  WindowServer
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_mach_scall64 + 22 (mach_kernel) [0xffffff80002f3b46]
       *1 ??? (mach_kernel + 825197) [0xffffff80002c976d]
         *1 mach_msg_overwrite_trap + 195 (mach_kernel) [0xffffff800021e043]
           *1 ipc_kmsg_send + 117 (mach_kernel) [0xffffff80002139f5]
             *1 ipc_kobject_server + 241 (mach_kernel) [0xffffff8000226bf1]
               *1 ??? (mach_kernel + 746840) [0xffffff80002b6558]
                 *1 is_io_connect_method + 415 (mach_kernel) [0xffffff80006cb81f]
                   *1 IOUserClient::externalMethod(unsigned int, IOExternalMethodArguments*, IOExternalMethodDispatch*, OSObject*, void*) + 782 (mach_kernel) [0xffffff80006cddce]
                     *1 shim_io_connect_method_structureI_structureO + 266 (mach_kernel) [0xffffff80006cd26a]
                       *1 IOAccelGLContext2::set_surface_get_config_status(IOAccelGLContextSetSurfaceData *, IOAccelGLContextGetConfigStatus*, unsigned long long, unsigned long long*) + 602 (IOAcceleratorFamily2) [0xffffff7f81b8db1c]
                         *1 IOAccelGLContext2::get_config(unsigned int*) + 100 (IOAcceleratorFamily2) [0xffffff7f81b8efea]
                           *1 IOGraphicsAccelerator2::acceleratorWaitEnabled() + 104 (IOAcceleratorFamily2) [0xffffff7f81ba4e9c]
                             *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                               *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                                 *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                                   *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
             0x103745000 -        0x103745ffd  WindowServer (599.20.11) <1A1CC705-012E-3B8D-95FB-6E1883EA2952> /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/WindowServer
    *0xffffff7f81b7b000 - 0xffffff7f81baeffc  com.apple.iokit.IOAcceleratorFamily2 98.14 (98.14) <30D694F4-CF00-3CC3-9732-C6DEB6986B57> /System/Library/Extensions/IOAcceleratorFamily2.kext/Contents/MacOS/IOAccelerat orFamily2
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  uHD-Agent
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_unix_scall + 216 (mach_kernel) [0xffffff80002f3818]
       *1 unix_syscall + 471 (mach_kernel) [0xffffff800063e0a7]
         *1 __sigwait_nocancel + 480 (mach_kernel) [0xffffff80005ddd70]
           *1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
             *1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
               *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                 *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                   *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                     *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
                  0x1000 -                ???  ??? <DE36A007-FB4F-317B-8C6B-1E3237DCA934>
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  AirKeyboard
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
       *1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
         *1 recvfrom_nocancel + 224 (mach_kernel) [0xffffff80006201b0]
           *1 ??? (mach_kernel + 4326270) [0xffffff800062037e]
             *1 soreceive + 2306 (mach_kernel) [0xffffff8000614fa2]
               *1 sbwait + 297 (mach_kernel) [0xffffff800061aea9]
                 *1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
                   *1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
                     *1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
                       *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
                         *1 ??? (mach_kernel + 223627) [0xffffff800023698b]
                           *1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
      Binary Images:
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  client-mac
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:    0 samples on Battery, 0 samples on AC, 1 samples Unknown
    *1 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
       *1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
         *1 ??? (mach_kernel + 223264) [0xffffff8000236820]
           *1 ml_set_interrupts_enabled + 27 (mach_kernel) [0xffffff80002d650b]
      Binary Images:
                  0x1000 -                ???  ??? <FFFF245F-1190-8CB3-B8B0-DC0F16048E1E>
    *0xffffff8000200000 - 0xffffff80007a513a  mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
    Powerstats for:  prl_event_tap
    Start time:      1970-01-01 08:00:00 +0800
    End time:        1970-01-01 08:00:00 +0800
    Microstackshots: 1 samples
    Primary state:   1 samples Non-Frontmost App, Non-Background Priority, User mode
    User Activity:   0 samples Idle, 0 samples Active, 1 samples Unknown
    Power Source:   

  • CHKDSK deleting Files after Improper Shutdown

    I've been on a SATA drive for a while now...every time I crash and have to shut down by pressing the power button or reset, WinXP will ask me to CHKDSK...it runs...finds corupted files (9 out of 10 times it shuts down improperly) and deletes...I'm at a point where i'm afraid to use this thing...It has deleted a JPG i was working on...lucky for me it wasnt the PSD.
    Should this be happening?
    My Rig:
    AMD 64 3200+
    MSI K8T Neo2
    Apacer 512 DDR 400 PC 3200
    ATI Radeon 9800 128mb
    SB Live 5.1
    LG DVD RAM
    LG CD RW
    Maxtor 120 SATA
    TT 420W PSU
    Also wondering...which controller is better? the VIA or the PROMISE?
    Is there a update for the SATA drivers that came with the MOBO? (replace the old drivers on floppy and put the new one in??)

    Hi
    Right click on My Computer - manage - disk management, it will say if disk is healthy, there are various tools there to check disk, I would re partition and format. First check the cables are fully in place.
    I use the Via controller, its better.
    If you haven't ghosted before, it is not a good time to start. Don't think it will do any harm, but if you are not sure what you are doing, you may not get data back.
    I think norton AV on its own might be OK, but Norton System works, does not like this setup.
    Once you have formatted, run the check disk utility in disk management, with fix errors ticked.
    good luck
    jocko

  • Issue after improper shutdown

    My wife did an improper shut down by holding the power key while something was working on it. She is running mavericks on the system. Now it will start to boot and shut down when progress bar gets half way. Disk utility says it can not fix problems, and when I try to reinstall mavericks from disk utility, it either says hd is locked, or it won't show me hd.
    We have no system disk, so how can I fix this?

    OS X- Gray progress bar appears under Apple logo during startup
    OS X v10.6- Gray progress bar appears under Apple logo during startup
    You may end up having to erase the drive and reinstalling OS X:
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • On boot after improper shutdown, no automatic device check any more

    Several times I have to shut down with the hardware because of the f**king intel driver freezing the X server. Until a few days ago, at boot time the / device was automatically checked, but now I just get "enter root password for maintenance" and I have to rum fsck by hand (and sometimes fsck does it in no time without any interaction from me), and reboot again.
    Why isn't the device check automatically forced any more? Can I fix that?
    Thank you very much in advance.

    Same complaint. In my case thunderstorms are the usual cause. The error is the "superblock is in the future" or something like that. In the past "check forced" is triggered automatically. Now it switches to single user mode. I just do "control-d" and reboot and this time "check forced" is triggered. Would be good if there is a way to get back the old behaviour instead of requiring manual intervention. I don't usually turn on the monitor for my server.

  • Banks Agree to Erase Debts From Credit Reports After Bankruptcies

    FYI - "Under federal law, once a borrower has erased a debt in bankruptcy, banks are required to update the credit reports to indicate that the debt is no longer owed, and remove any notation of “past due” or “charged off.”" http://www.nytimes.com/2015/05/08/business/dealbook/bank-of-america-and-jpmorgan-chase-agree-to-erase-debts-from-credit-reports-after-ban 

    It still doesn't work   It says "page not found)

  • I have to keep turning on an off the wi-fi connection to connect to my network after system shutdown with mountain lion, I did not have to do this with 10.6.8 before I upgraded, is there a bug fix in the works?

    I have to keep turning on an off the wi-fi connection to connect to my network after system shutdown with mountain lion, I did not have to do this with 10.6.8 before I upgraded, is there a bug fix in the works?

    Many have posted this fix:
    Go to System Preferences > Energy Saver > Computer Sleep ... set to anything greater than the 15 min. default setting.

  • A few seconds after start the GDM mouse stops working

    After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
    Edited: Mouse works. Only pointer does not move.
    lscpi says:
    00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
    gdm says:
    usb 2-2: new low speed USB device using uhci_hcd and address 4
    input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
    (this line is repeated several times:)
    [drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
    [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
    [drm:i915_reset] *ERROR* Failed to reset chip.
    /var/log/Xorg.0.log says:
    [ 23.129]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 23.129]
    X.Org X Server 1.9.3.901 (1.9.4 RC 1)
    Release Date: 2011-01-07
    [ 23.129] X Protocol Version 11, Revision 0
    [ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
    [ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
    [ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
    [ 23.129] Build Date: 08 January 2011 11:27:31PM
    [ 23.129]
    [ 23.130] Current version of pixman: 0.20.2
    [ 23.130] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
    [ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.206] (==) No Layout section. Using the first Screen section.
    [ 23.206] (==) No screen section available. Using defaults.
    [ 23.206] (**) |-->Screen "Default Screen Section" (0)
    [ 23.206] (**) | |-->Monitor "<default monitor>"
    [ 23.206] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.206] (==) Automatically adding devices
    [ 23.206] (==) Automatically enabling devices
    [ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.260] Entry deleted from font path.
    [ 23.295] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.295] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.295] (II) Loader magic: 0x81f3160
    [ 23.295] (II) Module ABI versions:
    [ 23.295] X.Org ANSI C Emulation: 0.4
    [ 23.295] X.Org Video Driver: 8.0
    [ 23.295] X.Org XInput driver : 11.0
    [ 23.295] X.Org Server Extension : 4.0
    [ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
    [ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 23.296] (II) LoadModule: "extmod"
    [ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.314] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.314] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.314] Module class: X.Org Server Extension
    [ 23.314] ABI class: X.Org Server Extension, version 4.0
    [ 23.314] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.314] (II) Loading extension XFree86-VidModeExtension
    [ 23.314] (II) Loading extension XFree86-DGA
    [ 23.314] (II) Loading extension DPMS
    [ 23.314] (II) Loading extension XVideo
    [ 23.314] (II) Loading extension XVideo-MotionCompensation
    [ 23.314] (II) Loading extension X-Resource
    [ 23.314] (II) LoadModule: "dbe"
    [ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.320] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.320] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.320] Module class: X.Org Server Extension
    [ 23.320] ABI class: X.Org Server Extension, version 4.0
    [ 23.320] (II) Loading extension DOUBLE-BUFFER
    [ 23.320] (II) LoadModule: "glx"
    [ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 23.337] (II) Module glx: vendor="X.Org Foundation"
    [ 23.337] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.337] ABI class: X.Org Server Extension, version 4.0
    [ 23.337] (==) AIGLX enabled
    [ 23.337] (II) Loading extension GLX
    [ 23.337] (II) LoadModule: "record"
    [ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 23.338] (II) Module record: vendor="X.Org Foundation"
    [ 23.338] compiled for 1.9.3.901, module version = 1.13.0
    [ 23.338] Module class: X.Org Server Extension
    [ 23.338] ABI class: X.Org Server Extension, version 4.0
    [ 23.339] (II) Loading extension RECORD
    [ 23.339] (II) LoadModule: "dri"
    [ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 23.347] (II) Module dri: vendor="X.Org Foundation"
    [ 23.347] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.347] ABI class: X.Org Server Extension, version 4.0
    [ 23.347] (II) Loading extension XFree86-DRI
    [ 23.347] (II) LoadModule: "dri2"
    [ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 23.351] (II) Module dri2: vendor="X.Org Foundation"
    [ 23.351] compiled for 1.9.3.901, module version = 1.2.0
    [ 23.351] ABI class: X.Org Server Extension, version 4.0
    [ 23.351] (II) Loading extension DRI2
    [ 23.351] (==) Matched intel as autoconfigured driver 0
    [ 23.351] (==) Matched vesa as autoconfigured driver 1
    [ 23.351] (==) Matched fbdev as autoconfigured driver 2
    [ 23.351] (==) Assigned the driver to the xf86ConfigLayout
    [ 23.351] (II) LoadModule: "intel"
    [ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.408] (II) Module intel: vendor="X.Org Foundation"
    [ 23.408] compiled for 1.9.3, module version = 2.14.0
    [ 23.408] Module class: X.Org Video Driver
    [ 23.408] ABI class: X.Org Video Driver, version 8.0
    [ 23.408] (II) LoadModule: "vesa"
    [ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.414] (II) Module vesa: vendor="X.Org Foundation"
    [ 23.414] compiled for 1.9.0, module version = 2.3.0
    [ 23.414] Module class: X.Org Video Driver
    [ 23.414] ABI class: X.Org Video Driver, version 8.0
    [ 23.414] (II) LoadModule: "fbdev"
    [ 23.425] (WW) Warning, couldn't open module fbdev
    [ 23.425] (II) UnloadModule: "fbdev"
    [ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
    [ 23.426] (II) VESA: driver for VESA chipsets: vesa
    [ 23.426] (++) using VT number 7
    [ 23.435] (WW) Falling back to old probe method for vesa
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: drmOpenMinor returns 8
    [ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 23.435] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 23.435] (==) intel(0): RGB weight 888
    [ 23.435] (==) intel(0): Default visual is TrueColor
    [ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
    [ 23.436] (--) intel(0): Chipset: "946GZ"
    [ 23.436] (**) intel(0): Tiling enabled
    [ 23.436] (**) intel(0): SwapBuffers wait enabled
    [ 23.436] (==) intel(0): video overlay key set to 0x101fe
    [ 23.520] (II) intel(0): Output VGA1 has no monitor section
    [ 23.587] (II) intel(0): EDID for output VGA1
    [ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
    [ 23.587] (II) intel(0): Year: 2010 Week: 1
    [ 23.587] (II) intel(0): EDID Version: 1.3
    [ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
    [ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
    [ 23.587] (II) intel(0): Gamma: 2.20
    [ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
    [ 23.587] (II) intel(0): First detailed timing is preferred mode
    [ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
    [ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
    [ 23.587] (II) intel(0): Supported established timings:
    [ 23.587] (II) intel(0): 720x400@70Hz
    [ 23.587] (II) intel(0): 640x480@60Hz
    [ 23.587] (II) intel(0): 640x480@67Hz
    [ 23.587] (II) intel(0): 640x480@72Hz
    [ 23.587] (II) intel(0): 640x480@75Hz
    [ 23.587] (II) intel(0): 800x600@56Hz
    [ 23.587] (II) intel(0): 800x600@60Hz
    [ 23.587] (II) intel(0): 800x600@72Hz
    [ 23.587] (II) intel(0): 800x600@75Hz
    [ 23.587] (II) intel(0): 832x624@75Hz
    [ 23.587] (II) intel(0): 1024x768@60Hz
    [ 23.587] (II) intel(0): 1024x768@70Hz
    [ 23.587] (II) intel(0): 1024x768@75Hz
    [ 23.587] (II) intel(0): 1280x1024@75Hz
    [ 23.587] (II) intel(0): 1152x864@75Hz
    [ 23.587] (II) intel(0): Manufacturer's mask: 0
    [ 23.587] (II) intel(0): Supported standard timings:
    [ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 23.588] (II) intel(0): Supported detailed timing:
    [ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
    [ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 23.588] (II) intel(0): Monitor name: SyncMaster
    [ 23.588] (II) intel(0): Serial No: HMFZ102588
    [ 23.588] (II) intel(0): EDID (in hex):
    [ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
    [ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
    [ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
    [ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
    [ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
    [ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
    [ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
    [ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
    [ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 23.613] (II) intel(0): Using EDID range info for horizontal sync
    [ 23.613] (II) intel(0): Using EDID range info for vertical refresh
    [ 23.613] (II) intel(0): Printing DDC gathered Modelines:
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Printing probed modes for output VGA1
    [ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Output VGA1 connected
    [ 23.614] (II) intel(0): Using exact sizes for initial modes
    [ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
    [ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
    [ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
    [ 23.614] (**) intel(0): DPI set to (96, 88)
    [ 23.614] (II) Loading sub module "fb"
    [ 23.614] (II) LoadModule: "fb"
    [ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 23.628] (II) Module fb: vendor="X.Org Foundation"
    [ 23.629] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 23.629] (II) UnloadModule: "vesa"
    [ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.629] (==) Depth 24 pixmap format is 32 bpp
    [ 23.629] (==) intel(0): VideoRam: 262144 KB
    [ 23.629] (II) intel(0): [DRI2] Setup complete
    [ 23.629] (II) intel(0): [DRI2] DRI driver: i915
    [ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
    [ 23.656] (II) UXA(0): Driver registered support for the following operations:
    [ 23.656] (II) solid
    [ 23.656] (II) copy
    [ 23.656] (II) composite (RENDER acceleration)
    [ 23.656] (II) put_image
    [ 23.656] (II) get_image
    [ 23.656] (==) intel(0): Backing store disabled
    [ 23.656] (==) intel(0): Silken mouse enabled
    [ 23.658] (II) intel(0): Initializing HW Cursor
    [ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 23.673] (==) intel(0): DPMS enabled
    [ 23.673] (==) intel(0): Intel XvMC decoder disabled
    [ 23.673] (II) intel(0): Set up textured video
    [ 23.673] (II) intel(0): Set up overlay video
    [ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
    [ 23.673] (==) intel(0): hotplug detection: "enabled"
    [ 23.674] (--) RandR disabled
    [ 23.674] (II) Initializing built-in extension Generic Event Extension
    [ 23.674] (II) Initializing built-in extension SHAPE
    [ 23.674] (II) Initializing built-in extension MIT-SHM
    [ 23.674] (II) Initializing built-in extension XInputExtension
    [ 23.674] (II) Initializing built-in extension XTEST
    [ 23.674] (II) Initializing built-in extension BIG-REQUESTS
    [ 23.674] (II) Initializing built-in extension SYNC
    [ 23.674] (II) Initializing built-in extension XKEYBOARD
    [ 23.674] (II) Initializing built-in extension XC-MISC
    [ 23.674] (II) Initializing built-in extension SECURITY
    [ 23.674] (II) Initializing built-in extension XINERAMA
    [ 23.674] (II) Initializing built-in extension XFIXES
    [ 23.674] (II) Initializing built-in extension RENDER
    [ 23.674] (II) Initializing built-in extension RANDR
    [ 23.674] (II) Initializing built-in extension COMPOSITE
    [ 23.674] (II) Initializing built-in extension DAMAGE
    [ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
    [ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.316] (II) LoadModule: "evdev"
    [ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 24.334] (II) Module evdev: vendor="X.Org Foundation"
    [ 24.334] compiled for 1.9.0, module version = 2.5.0
    [ 24.334] Module class: X.Org XInput Driver
    [ 24.334] ABI class: X.Org XInput driver, version 11.0
    [ 24.334] (**) Power Button: always reports core events
    [ 24.334] (**) Power Button: Device: "/dev/input/event1"
    [ 24.340] (--) Power Button: Found keys
    [ 24.340] (II) Power Button: Configuring as keyboard
    [ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.340] (**) Option "xkb_rules" "evdev"
    [ 24.340] (**) Option "xkb_model" "evdev"
    [ 24.340] (**) Option "xkb_layout" "us"
    [ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.380] (**) Power Button: always reports core events
    [ 24.380] (**) Power Button: Device: "/dev/input/event0"
    [ 24.386] (--) Power Button: Found keys
    [ 24.386] (II) Power Button: Configuring as keyboard
    [ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.386] (**) Option "xkb_rules" "evdev"
    [ 24.386] (**) Option "xkb_model" "evdev"
    [ 24.386] (**) Option "xkb_layout" "us"
    [ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 24.394] (II) No input driver/identifier specified (ignoring)
    [ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
    [ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
    [ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
    [ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
    [ 24.403] (**) Option "xkb_rules" "evdev"
    [ 24.403] (**) Option "xkb_model" "evdev"
    [ 24.403] (**) Option "xkb_layout" "us"
    [ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 24.411] (II) No input driver/identifier specified (ignoring)
    [ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.182] (II) intel(0): Using hsync ranges from config file
    [ 27.182] (II) intel(0): Using vrefresh ranges from config file
    [ 27.182] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.256] (II) intel(0): Using hsync ranges from config file
    [ 27.256] (II) intel(0): Using vrefresh ranges from config file
    [ 27.256] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.363] (II) intel(0): Using hsync ranges from config file
    [ 27.364] (II) intel(0): Using vrefresh ranges from config file
    [ 27.364] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.433] (II) intel(0): Using hsync ranges from config file
    [ 27.433] (II) intel(0): Using vrefresh ranges from config file
    [ 27.433] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
    [ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
    [ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 72.861] (**) USB Optical Mouse: always reports core events
    [ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
    [ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
    [ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
    [ 72.866] (--) USB Optical Mouse: Found relative axes
    [ 72.866] (--) USB Optical Mouse: Found x and y relative axes
    [ 72.866] (II) USB Optical Mouse: Configuring as mouse
    [ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
    [ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
    [ 72.867] (II) USB Optical Mouse: initialized for relative axes.
    [ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
    [ 72.868] (II) No input driver/identifier specified (ignoring)
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.752] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.322] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.323] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.093] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.094] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.080] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.081] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.641] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.642] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.913] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.712] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.348] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.916] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.917] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.953] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.954] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.450] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.451] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.802] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.803] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.372] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.373] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.630] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.631] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.932] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.933] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.517] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.518] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.762] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.763] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.439] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.440] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.705] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.706] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.190] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.191] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.467] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.468] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.768] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.770] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.446] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.849] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.852] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.082] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.280] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.171] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.172] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.312] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.313] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.209] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.210] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.521] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.526] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.470] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.606] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.607] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.070] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.071] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.911] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.826] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.827] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.814] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.567] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.568] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.833] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.834] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.806] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.807] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.428] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.429] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.354] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.355] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.029] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.030] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.266] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.267] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.519] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.520] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.179] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.180] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.297] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.376] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.395] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.396] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/outpu

    I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Installing application in shutdown script does not work

    Hello,
    I'm trying to organise the deployment of office 2013. I want to give users the choice between installation during startup and installation during shutdown of their computer.
    Installation during startup works fine: installation starts and the user can use their computer and wait for the installation to finish in the background.
    Installation initiated from a console window works fine as well.
    However, installation using a shutdown script doesn't work as the installation command returns immediatly, the script ends and the computer shuts down.
    I have changed the gpo script timeout setting.
    In the powershell script, I execute the installation using "start-process" with the option "-wait". It seems like this command returns immediatly and the setup is never executed as it does not start logging the installation progress to
    a local log file.
    The shutdown script runs fine and it also logs its progress to a logfile on a network share so I'm sure the script actually runs and it has network access as well.
    Any clues as to why the installation might fail during a shutdown script and work fine in other situations? Thanks!
    I'm not sure if this is a gpo or an office 2013 deployment question. I'm thinking the environment during execution of a shutdown script might be different so that's why I'm asking my question here.

    Hi,
    Based on your description, we can also try asking for suggestions in the scripting forum to see if they can provide a better solution.
    The Official Scripting Guys Forum
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Best regards,
    Frank Shen

  • I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

    I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

    This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
    Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
    tt2

  • When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id,  I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.

    When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id,  I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.

    Finally got through to tech support and found someone who seemed to know what was going on, he walked me through and using appleid.applesupport got me to a point where i could get a new password for the apple id that kept showing up. 
    I think you were on the right trail and I want to say thanks for your help.  Much appreciated
    ccl43

  • Exporting report to excel format via VBA to work in 2007 runtime

    Hi
    What code can I use to export a report to excel format file which will work in Access 2007 runtime?
    Thanks
    Regads

    As I know, you can easily export the data from an MS Access Report to Excel, but it's really hard to get the formats exported along with the data, or just not doable at all. 
    Please see these links:
    http://www.howtogeek.com/howto/microsoft-office/export-an-access-2003-report-into-excel-spreadsheet/
    http://www.access-programmers.co.uk/forums/showthread.php?t=143884
    Also:
    https://social.msdn.microsoft.com/Forums/office/en-US/826a30c5-775e-4a51-b639-2ffb046bfe85/formatted-access-report-to-excel
    Also, keep in mind...it's easy to export the data from a report to Excel.  You can certainly setup Excel as a template, which has all the formatting applied and just sits on your disk drive...somewhere...waiting for you to dump new data into it from
    a new report...whenever you need it.
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Maybe you are looking for

  • Missing Parameter values - Error

    Post Author: Shayari CA Forum: .NET Hello, There is a main report,from which we pass the parameters to the subreport.The subreports parameters are the stored procedure's input parameters which are created when the SP is included as the datasource.Whe

  • RSS and Podcast Title

    Hello all. I'm having some difficulty with my Podcast RSS feed. The title iWeb uses is Podcast. Where does iWeb get the title of the Podcast when creating the RSS feed? I have named the podcast correctly in GarageBand and also in the Inspector in iWe

  • IPod nano 4th generation backlight no longer works.

    After 2 years of faithful service my iPod nono no longer allows me to view the screen without the help of a bright light pointed at the screen. I tried the 5 'Rs' in the manual, it is fully charged, plays as it always has but without the backlight. P

  • Re: iPhoto thumbnail corruption?

    My wife is going nuts trying to cope with erroneous thumbnails attached to her images in iPhoto (a thumbnail shows one thing and when she double clicks on it the real image shows). I assume the thumbnails file, or whatever, is corrupted? If so maybe

  • Ipod keeps disconnecting during sync

    Just adding my issues to the pile. Same as many other, I consistently have my 80GB Classic ipod disconnect with the "wrong volume in disk" message. It will make it through about 2100 of the songs before it stalls out and disconnects. Every time it ha