Report and queiry

hi freinds
let me know what is report and queiry, when do we use
thanks

Hi tariken
SAP ERP include many Report technic. Such as, Drilldown report, report painter, Query, etc.
From business view, report be used shown operation result.
From SAP technic view, Drilldown report, report painter, Query, etc. are collectively called report.
Best Regards,

Similar Messages

Open Work Order report and shortage report

Hello,
First of all, I am very new to SAP and sap forum. I do need to learn SAP very fast. I work as Buyer and Planner. I would like to know how do you run open work order report and also how do run shortage report.
I appreciate different feedback.
Thanks
Raj

Hi,
Use tcodes CO24. First you need to activate that report PPCOXPR1 in SE38 enter report name and execute
In COOIS select list components you can be requirement qty and withdrawn qty , here you can find out open work orders also
Thanks
Diwakar

Crystal report(Can i link sub report and main report Compulsorily) - invalid path

hi.
i need small clarification.
i am developing one Crystal report
main report i took it from rdr1 one table...
report is working fine..
Sub report i took it from inv1 one table.
i have not linked any fields from these tables.
May be it is having links in b1..
but in my other report both the tables.... from main report and sub report does not have any relation.
My Questions is..
Can i Compulsorily link fields to main report...
if both does not have any relation what should i do...
i took two tables.
main report rdr1
sub report inv1...
if i run the report it is asking two parameters one is for sub report and other one for main report working find in crystal report.
but...i want to run the report in b1.
while importing i am getting the error (Plz have a look on below image)
if i choose any other report it is importing fine...
Clearly i am mentioning i dont want to link both tables there is no links between two reports...
in this scenario can develop a report..
I need your Valuable suggestions.
here below u can find my developed sample report...
http://www.megafileupload.com/en/file/544758/NewReport-rpt.html

hi.
If i try only i am getting the error..
out side if i run i am able to run the crystal report but
in b1 i am not able to import the report.
you can also try my report
from below link u can get my simple report.
if u find any mistake what i have done plz inform me..
http://megafileupload.com/en/file/544806/NewReport85-rpt.html

Crystal Report and Log4net error 1.2.10

Hi at all,
I have problem on Crystal Report and log4net.
It happens when I deploy the Web applications on the server.
I'm using Visual studio 2013 update 2, and I'm using log4net 2.0.3 (1.2.13) and I'm using CRforVS2013_13_0_10, the last.
When I deploy my application on the target machine, where I have also installed the runtime 64 bit for Crystal Report, I found this error:
ERROR 2014-07-31 16:26:42,721 1528053ms 8Euro                  - IP:192.168.0.38    - HOST:192.168.0.38 DumpWebRequest                           - ERROR: Exception of type 'System.Web.HttpUnhandledException' was thrown.
Exception StackTrace:   at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ERROR: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.
ERROR: Could not load file or assembly 'log4net, Version=1.2.13.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Exception StackTrace:   at CrystalDecisions.Shared.SharedUtils..cctor()
ERROR: Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Not able to extract code, error:Value cannot be null.
Parameter name: source
Exception StackTrace:
On my local Visual studio it works, works fine.
But when I'm deploying on Server, 2008 win 64 bit, I found this error.
I've tried everything, I've installed also the runtime 64 bit on the target/server machine.
The problem is that the log4net is not registered in the windows\assembly directory on the target server ? Do I have to use the Gac util to register the log4net dll assembly ?
Please help me, It one day that I'm facing this error, but I'm not able to solve.
Regards
Vittorio

Hi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to develp a subreport in the same page of the main report and processed when is called

SSRS 2012
Hi guys,
I am developing a report that includes a subreport.
therefore The report is made up by 2 sections:
1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info (Each row represent a specific item)
2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
for the main reports).
3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
Thanks for your help.

Hi Fasttrack2,
According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
Reference:
Troubleshooting Reports: Report Performance
Drillthrough, Drilldown, Subreports, and Nested Data Regions
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.

Generate SSRS Report and save as PDF in SharePoint

Hi,
I am working on a SharePoint 2010 Visual WebPart that lets a user click a button to generata a SSRS report and save the report in a SharePoint Library as a PDF file. Code is mentioned below:
try
string siteContext = SPContext.Current.Web.Url;
string strReport = siteContext + "/Reports/Quote/Quote.rdl";
WR_SSRS.ReportExecutionService rs = new WR_SSRS.ReportExecutionService();
rs.Url = siteContext + "/_vti_bin/ReportServer/ReportExecution2005.asmx";
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
byte[] result;
string format = "PDF";
string historyID = null;
string devInfo = "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>";
WR_SSRS.ParameterValue[] parameters = new WR_SSRS.ParameterValue[3];
parameters[0] = new WR_SSRS.ParameterValue();
parameters[0].Name = "EnqID";
parameters[0].Value = enqID.ToString();
parameters[1] = new WR_SSRS.ParameterValue();
parameters[1].Name = "QuotationID";
parameters[1].Value = quoteID;
WR_SSRS.DataSourceCredentials[] credentials = null;
string showHideToggle;
string encoding;
string mimeType;
WR_SSRS.Warning[] warnings;
WR_SSRS.ParameterValue[] reportHistoryParameters;
string[] streamIDs;
WR_SSRS.ExecutionInfo execInfo = new WR_SSRS.ExecutionInfo();
WR_SSRS.ExecutionHeader execHeader = new WR_SSRS.ExecutionHeader();
string SessionId = null;
string extension;
rs.ExecutionHeaderValue = execHeader;
execInfo = rs.LoadReport(strReport, historyID);
rs.SetExecutionParameters(parameters, "en-gb");
SessionId = rs.ExecutionHeaderValue.ExecutionID;
result = rs.Render(format, devInfo, out extension, out mimeType, out encoding, out warnings, out streamIDs);
execInfo = rs.GetExecutionInfo();
using (SPSite site = new SPSite(SPContext.Current.Site.ID))
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPFolder folder = web.Folders[siteContext + "/Quotes"];
string filename = string.Concat(quoteID, ".pdf");
//remove old copies
SPList lib = web.Lists["Quotes"];
foreach (SPListItem i in lib.GetItems())
if (i.Name == filename)
i.Delete();
break;
SPFile file = folder.Files.Add(filename, result);
SPListItem item = file.Item;
item["EnquiryID"] = enqID.ToString();
item["FinalQuote"] = "No";
item.Update();
web.AllowUnsafeUpdates = false;
catch (Exception ex)
LogError(ex.Message);
The WebPart works fine in my local server and even on another development testing server. However, once deployed to the live server that has claims authentication it stops working and throws an error that says:
"Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<RSError xmlns="http://www.microsoft.com/sql/reportingservices"><MoreInformation><Message>An unknown error occurred with the Reporting Services endpoint on this SharePoint site. Contact the SharePoint site administrator for help.</Message></MoreInformation></RSError>
If I open the report manually in SharePoint Site, it works fines it even works fine when try to view in a WebPart.
Can someone help me with this ?
Regards, Vikram

Hi Vicky,
Based on the error message, it is related to the service account for reporting service.
If the Report Server service runs under a built-in account such as NetworkService, the Grant database access option in SharePoint Central Administration will not work correctly.
Configure the service account to run under a domain user account as follows:
1. Start the Reporting Services Configuration tool and connect to the report server.
2. On the Service Account page, click Use another account, enter a domain user account, and click Apply.
3. Click Web Service Identity, for Report Server, click New, type an application Restart the Report Server service.
Here is a detailed MSDN article for your reference:
http://msdn.microsoft.com/en-us/library/ms159704.aspx
Best Regards
Zhengyu Guo
TechNet Community Support

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

Financial reporting and balance carry forward at Line item level

Hello
We are in the process of implementing a new GL and using it to create Balance Sheet and P&L statements in BW.
We have installed the new datasource for GL line items 0FI_GL_14 and loaded the data to a DSO. Installed the 0FI_GL_10 (totals infosource) as well.
Also we created a custom infocube on the line items DSO and want to use it to report against a Financial Statement Version. In order to do that we created a
virtual cube with the FM and added the necessary Financial Statement Item and other key figures in the virtual infocube.
Now I want to know is it the correct way to create financial reports?
Can we load totals and Line items to the same infocube? Do we have to load totals to a different DSO/Cube or same Cube?
How do we address the Balance Carry Forward on the Line items cube? Since the balance carry forward is done on totals only, and the cube I created is a detailed cube is it possible to carry forward balances at that level?
Also can someone let me know what is the best approach to create financial reports and give drill down capability at the document level?
Thanks in Advance
Raju Kosuru

Now I want to know is it the correct way to create financial reports?
NO .. Its not.
Can we load totals and Line items to the same infocube?
NO
Do we have to load totals to a different DSO/Cube or same Cube?
Yes.. SAP has delivered C10 for Totals and O14 for line items... No point in creating cube for line items i.e. on top of O14.
Balance carry forward can be done on totals only (that is how totals extractor _10 is designed), U can not do that on the Line items. Pls contact functional consultant for clarification
Best approach is RRI (Jump targets) for _10 report to _14 report to give drill down capability at the document level.

Difference in S_ALR_87013557 Report and CJI3 Report for Actual Values

Hi,
I have created a Project & booked some cost on against WBS Elements. Now when see CJI3 report it shows correct values but in S_ALR_87013557 it shows different value for Actual-Overall. This value is slightly greater than the actual value.
Please tell me how to resolve this issue?
Thanks,
Sandeep.

Hi,
CJI3 is a cost element report and S_alr......... is a Heirarchial report which will work on Value categories.
This may be due inconsistencies in cost either by value categories or by some other way.
Run CJEN and CJBN then check the report. still the problem persists.
check the value categories in the IMG whether you have maintained all the cost elements that are used while posting to wbs and check whether there is any diplucation of cost elements by the transaction 'Check Consistency of Value Category' which is available in IMG.
Navigation IMG>Project System>Costs-->Value Categories.
Rgds
Sudhir reddy

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]

Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein

Migrating from 11i to R12 - setup reports and diagnostics

Hi,
we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.

983173 wrote:
Hi,
we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Identifying Data Model Changes Between EBS 12.1.3 and Prior EBS Releases
https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
EBS Seed Data Comparison Reports Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
eTRM
http://etrm.oracle.com
Thanks,
Hussein

Performance Issue Crystal Report and Oracle

Hello,
We have one procedure that takes 3 input parameters and returns Cursor from Procedure that is used to design the report. There is no caluculation involved here and cursor is opended dynamically. We are using Oracle Native connection.
When we click on preview button it takes lots of time ( >10 Mins) to show complete data. While we call the same procedure in application and generate HTML report using Cursor returned it is done in < 15 Seconds. Can some point me where to look into to improve the performance of Crystal Report.
DB: Oracle 10G
CR: Version XI

Hi Vadiraja
The performance of a report is related to:
External factors:
1. The amount of time the database server takes to process the SQL query.
( Crystal Reports send the SQL query to the database, the database process it, and returns the data set to Crystal Reports. )
2. Network traffics.
3. Local computer processor speed.
( When Crystal Reports receives the data set, it generates a temp file to further filter the data when necessary, as well as to group, sort, process formulas, ... )
4. The number of record returned
( If a sql query returns a large number of records, it will take longer to format and display than if was returning a smaller data set.)
Report design:
1. Where is the Record Selection evaluated.
Ensure your Record Selection Formula can be translated in SQL, so the data can be filter down on the server, otherwise the filtering will be done in a temp file on the local machine which will be much slower.
They have many functions that cannot be translated in SQL because they may not have a standard SQL for it.
For example, control structure like IF THEN ELSE cannot be translated into SQL. It will always be evaluated in Crystal Reports. But if you use an IF THEN ELSE on a parameter, it will convert the result of the condition to SQL, but as soon as uses database fileds in the conditions it will not be translated in SQL.
2. How many subreports the report contains and in section section they are located.
Minimise the number of subreports used, or avoid using subreports if possible because
subreports are reports within a report, and if you have a subreport in a details section, and the report returns 100 records, the subreport will be evaluated 100 times, so it will query the database 100 times. It is often the biggest factor why a report takes a long time to preview.
3. How many records will be returned to the report.
Large number of records will slow down the preview of the reports.
Ensure you only returns the necessary data on the report, by creating a Record Selection Formula, or basing your report off a Stored Procedure, or a Command Object that only returns the desired data set.
4. Do you use the special field "Page N of M", or "TotalPageCount"
When the special field "Page N of M" or "TotalPageCount" is used on a report, it will have to generate each page of the report before it displays the first page, therfore it will take more time to display the first page of the report.
If you want to improve the speed of a report, remove the special field "Page N of M" or "Total Page Count" or formula that uses the function "TotalPageCount". If those aren't use when you view a report it only format the page requested.
It won't format the whole report.
5. Link tables on indexed fields whenever possible.
6. Remove unused tables, unused formulas, unused running totals from the report.
7. Suppress unnecessary sections.
8. For summaries, use conditional formulas instead of running totals when possible.
9. Whenever possible, limit records through selection, not suppression.
10. Use SQL expressions to convert fields to be used in record selection instead of using formula functions.
For example, if you need to concatenate 2 fields together, instead of doing it in a formula, you can create a SQL Expression Field. It will concatenate the fields on the database server, instead of doing in Crystal Reports. SQL Expression Fields are added to the SELECT clause of the SQL Query send to the database.
11. Using one command as the datasource can be faster if you returns only the desired data set.
It can be faster if the SQL query written only return the desired data.
12. Perform grouping on server
This is only relevant if you only need to return the summary to your report but not the details. It will be faster as less data will be returned to the reports.
Regards
Girish Bhosale

REPORT AND DATA BASE SETUP

i have been using CView Manager 11 to do my reports and is relatively easy to setup reports to the data base, but not all of my reports work with this program plus there is no user manual available. So I am trying to switch over to Chrystal Reports 11 with little success. I can not figure out how to setup the data base server with this program. I am trying to access the McKesson IntelliShelf Supply (Supply Scan) data base server. Is there anyone that can help me with this?

McKesson is an OEM partner of ours. I suggest you ask them how to.

Report and data comming wrong after compress data with full optimization

In SAP BPC 5.1 version to increase the sysetm performance we did full optimization with compress data.
Theis process end with error, after login into system the report and values comming wrong,
What is the wrong,how to rectify it
Regards
prakash J

This issue is resolved,

Report and queiry

Similar Messages

Maybe you are looking for