Report and workbook migration

Hi all,
what are the steps that need to be followed to migrate 3.X queries and workbooks to BI 7.0(2004s)? Or do they automatically get converted?
And is it possible to upgrade the frontend to BI 7.0 and use the new reporting (front end)functionalities, while the back end is still on 3.X?
Any insight or help would be appreciated and rewarded.
Thanks,
Mav

This question is a little ambiguous then as Heike and I have different interpretations. When you say "2004s backend", what do you mean? You need a 2004s spack to use the new functionalities (both backend and frontend).
Within this new stack, the old 3.x runtime exists and you can use it. Within the 2004s stack, you can use 3.x Infosource, transfer rules, update rules. I view this as a 3.x backend in a 2004s environment. So if your dataflow is using 3.x, that doesn't limit you to use only the 3.x tools. You can use the new tools.
I consider using transformations, DTP, etc as 2004s backend functionality.
So to clarify, what are you considering a 3.x backend? The technical requirement is to be on a 2004s stack, which I outlined in my original post... The delineation is the 3.x backend concept or 2004s backend concept in the new stack can both be used and that doesn't influence which frontend tools you can use.

Similar Messages

Obiee Reports and RPD Migrations

Hi All,
Could you please any one help me the steps for OBIEE reports & RPD migrations/deployments from instance to other instance.
Ex:-
scenario 1 :- i changed the reports (or) developed the new reports at development server , now i want to move this to other servers like UAT / PROD
scenario 2 :- i changed the existing RPD (or) developed the new logics in RPD at development server , now i want to move this to other servers like UAT / PROD
please help me the with steps.
Thanks,
Surendra.

Hello User,
You can do that in two methods:-
Method-1:-
i) FTPing the RPD and Webcatalog of DEV from Devinstancer to your Local Machine
ii) Again FTPing the Same RPD and WebCatalog from your local Machine to the UAT/Prod Server instance
iii) And modifying the NQSConfig and Instance Config accordingly.
Method-2:-
http://obiee-rk.blogspot.com/2012/01/migration-of-rpd-and-catalog-from.html
Let me know if u need any more info on this...
Thanks,
OBIEELearner.

What is BEX reports and workbooks and web templates

please send me in 2 lines of each,..thx

All 3 are the different forms of Result display
Bex Reports: It is based on MS excel functionalities and output is in Excel form. All reporting functionalities like swaping, exception, condition, etc..can be used.
Workbook: Bex reports can be formated as per need..say making bold, creating your own layout, adding images. In short all excel functions. This workbook gets refresed when new data loaded to datatarget
Web Template: Here charts, combos, dropdown...wtc ca be added what is called as Template.
Regards
Pankaj

Migrating from 11i to R12 - setup reports and diagnostics

Hi,
we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.

983173 wrote:
Hi,
we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Identifying Data Model Changes Between EBS 12.1.3 and Prior EBS Releases
https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
EBS Seed Data Comparison Reports Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
eTRM
http://etrm.oracle.com
Thanks,
Hussein

Migration steps in oracle reports and forms

Hi,
I want to migrate oracle reports and oracle forms from its curent versions to 10G.
current versions:
Oracle Report : 2.5
Oracle Forms : 4.5
any help would be appreciated.....
Thanks,
Ganesh

Hi,
there is the forms upgrade center on OTN. There is a lot of information about upgrading of forms. ou can find it here: http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html.
The way is (to my knowledge), go from 4.5 to 6i and then to 10g.
On the page you also find a link for Oracle Reports.
If you have more questions, I think you should ask your questions in the Forms Forum: Forms or in the Reports Forum: Reports There are the experts on the topic.
Herald ten Dam
http://htendam.wordpress.com

How to migrate Power View reports and respective BISM connections from one SharePoint environment to another?

Hello All,
We have a few Power View reports and respective BISM connections that need to be migrated from our DEV SharePoint 2013 site to our TEST Sharepoint 2013 site. The reports have been "migrated" over but they do not work. Eventually, I just recreated
all the Power View reports from the BISM connections.
We have to do one more Sharepoint migration, and I'd rather not have to recreate the reports. What do we need to do in order to migrate the Power View reports seamlessly?
Thanks,
Carter

I created a new BISM in the new SharePoint site with the same name and modified the cinneciton string in the report and uploaded the PowerView Reports ( download from the existing SP site ).
Please see the below link to modify the connection string in the PowerView report.
https://pivotstreamllc.zendesk.com/hc/en-us/articles/202123933-Editing-a-Power-View-Connection-String

Where to find the migration reports and errors

i am using Oracle SQL developer 3.0 for migrating MS SQL 2008 to oracle using migration wizard,after clicking on finish the tool throws the null as error window and asked me to look into migration reports. where should i find the migration reports and errors
KK
Edited by: 860986 on May 25, 2011 9:33 PM

Log into the SQL Developer Migration repository and you get the list of Migration Projects.
Click on the project you're interested into and on the right side you get a pane with Status, Summary, Analysis...
The Summary pane shows you how many objects SQL Dev migrated.
You also have Capture isues showing you the issued during the capture phase as well as Conversation Issues etc.

Migration of Anwers reports and Dashboard to different Machine

We are at very Inital level of development have created Repositories, Answers Reports and Dashboard on dev machine. Now i want to migrate to another box. So what are the files we will migrate. Please guide.

This one is based on TECHNICAL NOTE 369:
OBIEE: Migration from development to production environment.
DEVELOPMENT SERVER:
1. Stop Oracle BI Services
2. Take backups of the most recent development files (for recovery purposes):
a)Repository:           \OracleBI\server\Repository\*
b)Presentation Catalog:\OracleBIData\web\catalog\*
c)NQSConfig.ini:          \OracleBI\server\Config\NQSConfig.ini
3. If any Software registry strings were modified or added, export them.
4. Take backups of any customized GIF, CSS, GSP, XSL, and XML files from
                    \OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res
                    \OracleBI\web\app\res\
for postinstallation replacement of like production files.
PRODUCTION SERVER:
5. Copy any customized folder/file structures especially those of step 2 and 4.
6. Define necessary back-end database ODBC DSNs and/or native drivers required per repository Connection Pool(s) data source names definitions.
7. If created, import the saved development registry export.
8. Verify BI Server ODBC settings: There is an ‘Analytics Web’ ODBC System-DSN with the driver 'Oracle BI Server' installed on the Presentation Server box.
9. Verify Presentation Catalog Path: OracleBIData\web\config\instanceconfig.xml
10. Start Oracle BI Services
11. Verify Dashboard Web connection.
Regards, Thomas

Migration of bex 3.x queries and workbooks to Bex 7.1 queries and workbooks

Hi,
Migration of bex 3.x queries and workbooks to Bex 7.1 queries and workbooks.
For instance when you edit,open an 3.x query in 7.0 query designer it is automatically migrated.Would it be same if we open it in 7.1 query designer?Is it possible to migrate queries and workbooks without any fail or deletion or loss?
Thank you.

I will add to the already excellent suggestions made above that the migration from Bex 3.x to Bex 7.0 is VERY laborious. There are no automated tools.
All queries and workbooks must be identified (use this as an opportunity to get rid of unused objects)
Each query must be converted to BI 7 and repairs done as needed.
Each Workbook must be converted to BI 7 and repairs done as well. The "Automated" conversion tool that SAP provides (it's behind the scenes Visual Basic) presents problems with at least 50% of the workbooks, and so they have to be manually fussed with.
If you've used Visual Basic at all in your Workbooks, you'll have to change 'em all. The On Refresh event no longer exists.
And of course, test... test.. test.. and test.
And don't forget to retrain your users. The User interface is dramatically different.
Good luck ! We're 3 months in to a five month conversion project.

Migrating HFR and Web Analysis Reports and Documents

Dear All,
Is there any way I can migrate HFR and Web Analysis Reports and Documents from test environments to production instead of re-creating reports?
Thanks,
ioGGo.

For HFR reports,
- If you want to do a bulk export, then choose File->Export & select multiple reports & save to a .zip file when prompted. In this case, reports' folder hierarchy is maintained the same as in source.
- If you want to do a selective export, select the folder(where your report is present) from the (left)navigation pane. Then choose File->Export, select the report & save to a .des file when prompted.
For WAS reports,
you may export each report definition from File -> Export. I believe- it'd let you save as .apt file.
However, for both type of reports, you need to ensure the respective database connection file(s) are already present before you import the reports/documents in your prod. environment.
- Natesh

Discoverer Reports and OBIEE

Hi,
Our Company has some Discoverer Reports and we would like to convert those reports into OBIEE. Has Oracle provided any migration or conversion utilities for this excercise? Please let us know.
Thanks and Regards,
-G

Hello
It depends how simple your workbooks are. The more complex they are the more difficult they are to migrate and some Discoverer features will be lost during the translations. Some Discoverer features will not migrate at all.
At this moment in time, with the current state of DOMA, I am coming down on the side of starting from scratch with OBIEE. There are, in my opinion, just too many of Discoverer's nice features that will not migrate. Starting from scratch will allow you to take advantage of all that OBIEE has to offer. Migrating could limit you to what Discoverer had to offer.
You could try a migration and see how much work there is still left to do. However, before you can do that you will need to upgrade Discoverer to 10.1.2.1 at the minimum. If you have already upgraded Discoverer to 10.1.2.1 or 11g you should be able to migrate the metadata. The only supported OBIEE version at this time is 10.1.3.4.1. After you have migrated to 10.1.3.4.1 you can then upgrade it to 11g.
Best wishes
Michael

Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]

Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein

How to remove connect and workbook link after pressing Save as,Print,Export

I have to remove the connect link and workbook link which appear AFTER pressing Save as,Printable Page,Export in a discoverer viewer report. I had already removed the link in the report itself with changing the uix files, but after pushing the link for export, save as or print the link Connect and Workbook still appear.
I know that I have to change something in UIX Files, but which one and what I have to change...? Have anyone an idea? Thanx for fast reply, it´s a urgent problem.
in addition: In metalink,otn and google were no solution...

If the tone really is a single (or at least narrow band) frequency like the picture shows, I'd try the Notch Filter on the Audition/Effects/Filter and EQ menu. It might take some playing around to get the exact frequency and tweak the amount of cut you apply vs. the effect it will have on surrounding frequencies--but if you can get the right balance, you can then easily apply this to the whole of every file.
Sorry, can't help on the Premiere Pro question since I only use Audition.

Front end Backend Modeling Configuration Reporting and Extraction.

Hi..All
Can Any one plz explain the terms "Front end","Back end" related to Modeling,Configuration,Reporting and Extraction.
Thanks & Regards
Jonn
<u>[email protected]</u>

Hi,
Frontend is the reporting aspect, i.e Workbooks, queries, Web reporting, Crystal reports, etc.
Its called the frontend as that's what the users see and they don't see what goes on in the 'backend' i.e Config and Extraction, data manipulations, etc.
Modeling is used to design the cube, ODS, etc. Also modeling concepts can be used to design frontend queries as well.
Cheers,
Kedar

Install and config issues with Oracle Portal, Forms, Reports and Discoverer

For a while now I've been struggling with migrating a testing database to a newer version.
And right now I'm pretty much stuck at trying to configure Oracle Portal, Forms Reports and Discoverer
What I've got:
Windows server 2008 R2 64bit
Oracle 11g database
Java 6u27 64bit
JDK 1.6 64bit (using this after 1.7 ended up throwing out bugs while trying to start a weblogic server)
JDK 1.7 64bit
Weblogic 10.3.5 (or so i think - I've installed from the wls1035_generic.jar from the oracle website)
PFRD 11.1.1.2 with 11.1.1.3 installed over it, installed without config
and a hanging up configuration
Basically I've been trying to install PFRD (only forms, reports and enterprise manager from it actually) but it kept failing once it got to the configuration stage, so I installed without config, applied 11.1.1.3 and now trying to run the config manually with the good old \bin\config.bat
Result - the config froze for approx.18 hours then failed
There isn't much useful info I could deduct from the logs, mostly just says one or more configuration parts failed. At one place it mentions trying to set up a domain and starting up an adminserver for it - and apparently that's where it hangs up and finally times out and fails.
I'm a little clueless what to do about it as the logs don't say anything else of use I could understand. Any ideas there?

Trying the step by step, the only difference between that and what i do seems to be the file copying (which I can't do - there is no windows\extra\ directory anywhere, the files mentionned seem to already be on their places and either only there, or exactly the same) and clistering
So far the news ain't good - the config process hangs on creating domain ->Step Creating Domain started
It isn't frozen per se - the process doesn't use up any processor time, memory consumption within bounds, it reacts to button clicks and all..it just doesn't do anything concerning the said domain
the last thing the .out file shows:
Creating a new AdminServer Object ...
AdminServer port is 7002
Starting the domain ...
LOADING DLL : E:\OracleDb\Middleware\develtools\install\config\\StartUtil64.dlland in the log:
[2011-09-08T11:57:03.456+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 14] [ecid: 0000J98U0KsFS8XLxuDCiW1EQ92r000005,0] Setting >valueOf(DOMAIN_PORT) to:7002. Value obtained from:USERit's the same it did last time, when after 18hours it woke up with .out saying:
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3173)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1644)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:634)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3143)
     ... 18 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
progress in calculate progress4
progress in calculate progress4
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
Going to execute executeAfterConfig
java.lang.IllegalStateException: Action:Application Configuration failed with error:Configure Classic Failed.
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.fail(ConfigAction.java:227)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:129)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
In Config Module Finish Event...and the log continuing with some variable setting notifications and this:
[2011-09-08T08:27:45.272+02:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 14] [ecid: >0000J93lRQOFS8XLxuDCiW1EPpn_000005,0] One or More configurations failed. Exitingthen again more traces and notifications until the end marking config as failed
I'm kinda paranoid about the double backslash in the dll path, but other than that no clue as to why the domain doesn't set up
the other link you mentionned seems to have no relevance yet
does that clear up anything for you though?
..can the lack of SOA suite have anything to do with the problem?

Report and workbook migration

Similar Messages

Maybe you are looking for