Report Asset (tables)

Hi,
I need to make a new report  (z report) which shows the accumulated ordinary depreciation posted in a specified date. I can see that the table ANLC shows me the ord. dep. posted accumulated in the year up to the last period and the accumulated in the last years, but I need to get it in the date that I enter as a parameter, so it could be a past period. For example the depreciation was run until 31.07.09 and I need to get by the reporte the one accumulated until 31.05.09.
I cannot find a table which shows me this information, any idea?
In addition, I need the report could shows me the depreciation planned for the future, but I have the same problem; in the table ANLC I could get the one planed for the rest of the year, but not the one for future years. Any idea?
Thanks,
Cecilia

Hi,
According to me you dont need to go for a Z report to get the accum dep values until your report date, which you have specified in your selection screen.
Please check the below thread, where i have explained earlier to the poster regarding similar issue by me.
[Re: Calculating Acqusition value and Accumulated depriciation]
Further to that you can use anohter report S_P99_41000192 - Posted Depreciation, which will shows the posted dep for an asset for a period.
I hope above will serve your purpose.
Thanks,
Srinu

Similar Messages

  • Relation between BSEG with Asset Tables

    HI Guru's,
    how to find relation between BSEG with Asset Tables like ANLA and ANEP..
    regards
    JK

    Foreign keys
    - ANEP items are linked to ANLA via fields in common ANLN1 and ANLN2
    - ANEK header is linked to ANEP items via fields in common ANLN1, ANLN2, GJAHR and LNRAN
    - BKPF and BSEG are linked to ANEL ANEP via BUKRS, BELNR and GJAHR
    Optimization (as BSEG is behind a cluster table RFBLG)
    - Append BSIS (ZABSIS) and BSAS with ANLN1 and ANLN2, then create an index with these fields. As BSIS is filled via MOVE-CORRESPONDING statement, only a one-shot report to initially fill the new fields is to be developed. (look at old OSS [Note 62435 - F-03: Selection by purchasing documents|https://service.sap.com/sap/support/notes/62435] for optimization via purchase order)
    Regards

  • Report In Table Format in Email

    Dear sir,
    i want to send mail to user in format of report of issues in table Format in Body of mail.
    Actully i want to send mail daily to user with Pending Issues of user.
    HOD allote issue to user with Close target Date .Mail would be fire till tagget date >sysdate .
    There can be Multiple issue with user.
    so i want to create a list of All pending issue in report in table which are not Closed .
    Report should be display with that column
    eg. User 0010 has 3 Pending Issue
    Issue No-----subject-----Create On-----Target Date
    001---------ABC-------27-Mar-2011-------30-Jnn-2011
    002--------BHN-------23-Jun-2011---------06-July-2011
    003--------JHN--------05-Jun-2011---------02-July-2011
    That Report Should be sent to User in mail.
    My Code is
    DECLARE
    l_id number;
    to_add varchar2(1000);
    to_sub_by varchar2(1000);
    from_add varchar2(1000);
    l_body varchar2(4000):=:P33_DESCRIPTION;
    l_sub varchar2(1000):=:P33_SUBJECT;
    I_case varchar2(10):=:P33_CASE_ID;
    I_isue_dte date:=:P33_SUBMITTED_ON;
    l_regd    varchar(100);
    CURSOR C1 IS SELECT EMAIL_ID,(SELECT EMAIL_ID FROM USER_MAS WHERE USER_ID =:P33_SUBMITTED_BY_ID) AS D FROM USER_MAS WHERE USER_GR_ID=:P33_ASSIGNED_TO_GROUP_ID AND USER_ID NOT IN(:APP_USER);
    BEGIN
    if :P33_ASSIGNED_TO_GROUP_ID is not null then
    open C1;
    LOOP
    FETCH C1 INTO to_add,to_sub_by;
    EXIT WHEN C1%NOTFOUND;
    select email_id,user_name into from_add,l_regd from user_mas where user_id=:app_user;
    l_id:=APEX_MAIL.SEND(
            p_to        => to_add, -- change to your email address
            P_cc        => to_sub_by,
            p_from      => from_add,
            p_body      => 'Issue Information'||''||chr(13)||chr(10)||chr(13)||chr(10)||
                           'www.farhorizonindia.net:7777/crm'||''||chr(13)||
                           'Issue Title'||':'||l_sub||CHR(13)||chr(10)||
                           'Issue Number'||':'||I_case||CHR(13)||
                           'Issue Open Date'||':'||I_isue_dte||''||chr(13)||chr(10)||CHR(13)||chr(10)||
                           'Most Recent Comment'||':'||''||chr(13)||chr(10)||
                           l_body||chr(13)||chr(10)||''||CHR(13)||chr(10)||'Regards'||chr(13)||chr(10)||''||l_regd||CHR(13)||chr(10)||CHR(13)||chr(10)||'Please do not reply to this email.If you wish to update the call.please login to the issue Management.',
      P_subj      => I_case ||' Issue '||l_sub);
    end loop;
    close C1;
    end if;
    COMMIT;
    apex_mail.push_queue(
    P_SMTP_HOSTNAME => '102.111.0.9',
    P_SMTP_PORTNO => 25);
    commit;
    END;How can i create that format in Body Of sending Email.
    Thanks
    Vedant
    Edited by: Vedant on Jun 30, 2011 3:44 AM
    Edited by: Vedant on Jul 5, 2011 9:17 PM

    Look at using an interactive reports and subscription routine..: http://st-curriculum.oracle.com/obe/db/apex/r40/apexirr/apexirrdev/apexirrdev_ll.htm
    Death called while you were out, so I gave him your cell number.
    Thank you,
    Tony Miller
    Webster, TX

  • Create a Cockpit (Transaction) for Reports and Tables

    Hi Gurus,
    i am very new in ABAP. I want to create a Transaction/view in SAP BW where i can put my favourite Abap reports and tables and execute These directly from the created view/Transaction without se16/se11 or se38 Access and dont know if this is possible and how to do it.
    the reason herefore is that we get deprived in differently time ranges our authorizations for the Standard Transactions.
    I have a list of my tables and programms.
    Thanks for your help.

    we get deprived in differently time ranges our authorizations for the Standard Transactions.
    So you try to bypass security checks put in place by the Basis team
    or could you explain your requirement ?
    Remember (or learn) that creating such transaction, you are able to bypass following authorization checks using SU24 (Identity Management, User and Role Administration of Application Server ABAP, AS ABAP Authorization Concept, From the Programmed Authorization Check to a Role, Editing Authorization Default Data (Development System) / Editing Authorization Default Data (Customer System). )
    Regard,
    Raymond

  • Report Asset

    Dear Expert,
    Is there report asset that shown Depretiation value, book value,  and Purchase Order Value ?
    Example,
    our depretiation use IDR but n PO Asset we use USD.
    Rgds,
    Iwan Siahaan

    You need to develop a report.
    Before that check if you can bring purchase order number into sort version: (Check in OAVI)
    Edited by: Ravi Sankar Venna on Nov 4, 2011 9:56 AM

  • Report or table

    Dear All,
    Please let me know from which report or tables can i get the list of delivery order, delivery document number, billing document number and corresponding FI document number.
    Regards,
    Indranil

    HI
    In the table VBRP you can get the sales order number, delivery number the fields are
    VBRP-AUBEL (Sales Order)
    VBRP-VGBEL (Delivery)
    VBRP-VBELN (Invoice
    For Accounting doc you need to goto BKPF Table
    regards
    Prashanth

  • Report - asset balances by asset class

    dear all ;
    when i run report asset balances by asset class (S_ALR_87011946) , it tips error message "fiscal year change not yet made for company code1000"
    what's wrong with it ,how can i do ?
    thanks.

    Hi
    if you want close posting period you have post depreiciation completely then only system will allow close posting period
    Thanks & regards
    Phaneendra

  • Asset table for plan data

    hi,
    may i know which table i can get the asset base value for yr 2008? i able to get 2007 data but not able to get 2008 in the asset table.
    thanks

    Hope Table ANLC Asset Value Fields can help you !

  • Asigning Reports, specific tables and Url links to the Role

    Hello Gurus,
    could you please tell me the procedure of asigning Reports, specific tables and Url links in the role.actually i know the process of assigning T-Codes to the role but i dont know the procedure for reports and url links and tables...
    i hope u people will respond positively.
    Cheers.......
    srinivas.korva

    Hi Srinivas,
    "i want to add only one particular table not all tables", you can do this using a Custom Transaction Code, the following are the steps to do it:
    1) goto se93, give a unique name, say zxxx
    2)Enter SE16 into the transaction field and select the flag the ‘skip initial screen’ field:
    3)On the lower portion of the screen, enter the following information:
    Name of screen field: DATABROWSE-TABLENAME
    Value: Enter the name of the table you want to browse with
    4)save it.
    5) Now add the transaction zxxx in th role, and assign it to the user.
    With this, when user executes the transaction, he/she will be able to see only the perticular table you added.
    "in PFCG what is the use of Exper mode for profile generation. what is the difference between general profile generation and expert mode profile generation".
    Expert mode has 3 options:
    1) Delete and recreate profile and authorizations---This will completely delete the old profile and add only  the new once.
    2) Edit old status----It will edit the old values
    3) Read old status and merge with new data----This will add the new values aithout actually disturbing the old ones.
    Hope it helps.
    Please award points if it is useful.
    Thanks & Regards,
    Santosh

  • HOW TO DECIDE IN A REPORT WHICH TABLE SHOULD LOOP FIRST?

    MY Report contains 3 item table and one header table or 4 header tables then how to decide that this table should loop first.And how could i judge that this table contains duplicate entries.
    HOW TO DECIDE IN A REPORT WHICH TABLE SHOULD LOOP FIRST?
    Moderator message: please search for available information/documentation before asking, do not post in all upper case, these forums are not a substitute for ABAP training.
    Edited by: Thomas Zloch on Dec 6, 2010 12:00 PM

    Hi,
    It is suggested to loop at the header table and then read the item table. Where in if you have multiple entries in the item table that matches, use the parallel cursors concept (Loop from index) as shown below
    Loop at header....
    Read table item with key......
    If sy-subrc EQ 0.
    Loop at item from sy-tabix.
    -- Perform your processing.
    endloop.
    endif.
    endloop.
    Also make sure if you have duplicate entries in your internal tables, Use SORT and then DELETE ADJACENT DUPLICATES so that it avoids the performance issues as well
    Hope this helps you.
    Regards,
    Shiva

  • Crystal Reports Temp tables - Driving Me crazy

    Our ongoing saga with temp tables and crystal reports continues. I am ready to go crazy, so any help would be appreciated.
    Notes:
    I create the ##tempsmall table in query analyzer, so it is present when the code executes.
    When I use the sa/Corinne credentials, it works.
    When I use a non sa set of credentials, I get an error saying the temp table is not found.
    When I add the non sa user to the tempdb as a user, with DBO permissions, It works.
    Code is below
    Dim Report As New ReportDocument()
    Report.Load("C:\KI\Customers\Live Customers\Brookledge\ReportRD\CrystalReportsApplication1\Projects.rpt")
    Dim LogInfo As New TableLogOnInfo
    Dim Tbl As Table
    For Each Tbl In Report.Database.Tables
      LogInfo = Tbl.LogOnInfo
      LogInfo.ConnectionInfo.ServerName = "ocamb-vista"
      LogInfo.ConnectionInfo.DatabaseName = "mapps20"
      ' We need to figure out how to make this work with a non sa user?
      LogInfo.ConnectionInfo.UserID = "medequipuser"
      LogInfo.ConnectionInfo.Password = "mapps"
      'LogInfo.ConnectionInfo.UserID = "sa"
      'LogInfo.ConnectionInfo.Password = "corinne"
      Tbl.ApplyLogOnInfo(LogInfo)
    Next Tbl
    Report.Database.Tables.Item(0).Location = "tempdb.dbo.##tempsmall"
    Dim v As New Viewer
    v.CrystalReportViewer1.ReportSource = Report
    v.Show()

    Hi Scott,
    The problem is tempdb is only accessible by the Administrator account and they are typically not to be used by anyone other than the system. This is how SQL server works, any query being run will create a temp table for the DB server to use and pass that data to the calling query, once completed the tempdb is deleted.
    As you have seen, unless you set permissions each time for a specific user you don't have access to it. One option is to use real tables that you can populate and delete the rows of data each time. Not very efficient though.
    Crystal respects all DB permissions so it's not a CR issue.
    One possibility is in your front end you could use MS SQL Server API's, if there are any, or use a stored procedure to set permissions to the temp table before calling CR to set location. Sorry no samples to do this, its a DB server question.
    Another option is to write the data into a Data Set and then set the location to the DS for CR to use. If you have more than 5000 row though don't do this or your reports will have performance problems.
    CR does not have any API's that will allow you to access a table that it does not have permissions to get to. Basic DB security, you'll get the same log on error trying to connect ot any table that user doens't have access to.
    Thank you
    Don

  • Last Used status for Reports, Transactions, Tables ??

    Dear all,
    Kindly let me know how to find the last used status for
    Reports, Transactions, Tables ??
    This is very urgent, Please do the needful.
    Waiting for the responses..
    Cheers,
    Virendra.

    Here the issue is same.
    STAT transaction is asking for the time which is the main hurdle.
    I am hanging around with STAT transaction but not finding
    how to getover the time specification.
    if i dont specify the time i takes by default the 2 or minutes back from the current time.
    which is not useful for me at all.
    My main requirement is that my seniors want to know what are all reports or transaction or tables which are not used at what last time ?
    so if i have to specify the time wont be so useful for me.
    And writing a report 'll not gain anything coz internal SAP report is take time as main parameter.
    Regards,
    Virendra.

  • IAS report infrastructure tables

    All,
    I am trying to find any information on where data would be stored in the report infrastructure tables on the IAS server. I want to be about to query these tables, similar to what the OEM web page has in a sense of displaying the failed/completed and running reports. Does anyone have any insight as to where these tables reside or if they are stored in something like xml files?
    TIA
    Brian

    Brian,
    I am looking for the same thing. If you have obtained the information you were looking for, would you please send it to me: [email protected]
    Thanks so much!

  • Hello! Want to programatically alter the Report.Database.Tables info

    Post Author: RobotSlave
    CA Forum: .NET
    Crystal Reports 2008    CFK0Y-KVURM2M-00UFAFF-N43MCrystal Reports 2008 for Visual StudioMicrosoft Visual Studio 2005Version 8.0.50727.762  (SP.050727-7600)Microsoft .NET FrameworkVersion 2.0.50727
    Installed Edition: Enterprise
    Microsoft Visual C# 2005   77718-007-4000003-41954Microsoft Visual C# 2005
    why? to save time thats why, I have a zillion reports that I have to point at a new database periodically, (and I have some time on my hands here at the ranch) so I decided to automate the process. I made a windows application with Visual Studio that opens the rpt files as objects using the crystaldicisions object object model thingy, pulls out the table logoninfo.connectioninfo stuff and sets it to a new location THEN when I try to set the report.database.tables back to my new modified version it says that the tables property is a readonly thingy. I can open and save, but I cant modify the part I want to... how can I alter the serverName and databaseName properties such that I can save the result?
    thank you!
    much love.

    Post Author: RobotSlave
    CA Forum: .NET
    I was making a new copy of the database.tables and then editing it then trying to set the whole reportdocument.database.tables = to my modified version, it was readonly so it didnt work. when I just iterate through the tables and set the properties on each one, it works just fine.

  • List of users with authorised reports and tables.

    hi all
    i have another requirement, that is List of users with authorised reports and tables in SAP.
    that means user wise which reports and tables have authorisations to execute.  for that what is the tcode or table name?.  please help me in this..
    Thank you.

    Hi,
    In SUIM tcode expand transactions node der ull have for users..........
    Cheers,
    jose.

Maybe you are looking for