Report automatical date/time

Hello again. I have a table with some columns, a form on this table from which i insert data, but i want that on the report, at a specific column, instead of me entering the value, i want it automatically to insert the sysdate (date and hour/minutes) something like "select sysdate from dual". Is it possible to do what i want?

Hi Wintermute3190,
Can you create a sample of your page in apex.oracle.com.
Does your table have Data filed..
Is it a report or tabular form...
If it is a tabular form/ or normal form... how are you creating it .. using wizard or manualluy.
If u r creating using wizard , then Data field will be included in it .. you just need to
go to source tab
source used Alway replacing existing value in the session state
source typ sql query
and in source value or expression
enter select sysdate from dual;
If this doesn't work the create a dummy application in apex.oracle.com and give the credentials.. so that have we can solve it.
Regards,
Shijesh

Similar Messages

  • I have lost the automatic date/time stamp

    I have lost the automatic date/time stamp when a form is submitted on my response page.  How do I make it start doing it again?  The column just appears blank now with new submissions.

    In the first cell of the column you need to re-enter the formula that used to be there.  Enter "= LOCALTIME(ROWCREATEDATE()".  You may need to change the date format after this.  Click on the Table button in the toolbar, select the Column with the dates, then select your prefered format.
    -Jeff

  • Time is delayed by 10 minutes when you use Automatically Date & Time

    Time is delayed by 10 minutes when you use Automatically Date & Time in France

    It is not carrier as all my Apple products where up to 10 minutes fast. I had to reset each product to the correct time. I'm in New Zealand.

  • TS3297 I find the instructions to use automatic date/time in ts3297 to be totally unacceptable.

    I do things on my MBP (software builds) that REQUIRE consistent timestamps. I also travel extensively, which frequently results in "going backwards in time' (flying east to west). Updating date/time automatically causes total confusion for my builds, among other things.
    I haven't debugged (yet) the same error message on my iPhone 4 which _does_ have 'automatic date/time' set.
    My iPhone 4S and original iPad seem to work just fine. The 4S has automatic date/time, original iPad has manual date/time.
    All ios devices are 5.1.1, MBP is Mountain Lion. In other words, no software updates required for any device.
    The interesting thing, it's only updates.... Now that _does_ require date/time info, but I would expect to see 'no updates found', not 'unable to connect'.

    Okay, checked the iPhone 4 debug steps.
    Not my ISP, I can press 'featured' in the App Store and see what's up. Safari works, etc.
    Doesn't matter whether connection is Wi-fi or 3g, fails.
    Powered down/up, no change. Switched from automatic to manual and back, no change.
    Went back to MBP, the OSX app store works just fine. It found I needed to update iTunes on my MBP. We'll see what happens after that. Can't expect it to solve my iPhone 4 issue, though.
    Download time for iTunes update is 35+ minutes (hotel connection). I'll be back.....

  • Automatic Date & Time

    Somehow the Automatic date & time, and the Automatic time zone settings get themselves unchecked.  I don't know how it happens, but it's happened three times in the past month.  Is there some way to lock them, and perhaps other settings as well, so they can't be changed?  Or is access to all settings on the LG G2 wide open all the time?

    Thank you for the quick response!  I have never backed up the phone nor restored to factory data reset.  It's a new device.  I've had it for about a month.  I am the only user of this phone.  There are no kids in the house.
    I suspect what's happening is that it is very easy to get to the settings page from the front panel, and that if the I put the phone in my pants pocket, it doesn't take much to get into settings mode and from there to the date settings and from there turning off those automatic time/date settings.  I've notice other settings get turned off as well, so it's not just the date and timezone.  If there was some way to make it harder to get to the settings page, that would help a lot.  Maybe if that link were hidden, or just not on the front panel?
    The first time this happened I was on a trip to a different time zone.  I set the alarm clock to wake me up for the flight back home, and when did went off it was 32 minutes late.  The next time it happened I had set an alarm clock for a morning business meeting and it got me there an hour early.  And then it happened again this week but now I check the time every night, so I caught it.
    I was using a blackberry for years before this phone, and they made the settings pages well hidden.  So I was hoping there was a way they could be hidden better on this phone.

  • Automatic date/time stamp a document

    Is there a way to automatically insert a date/time on a document? I have a program that allows me to alter pdf documents and I need to be able to enter the date and time. Blackberry allowed me to type "dt" and it would automatically enter it for me. Does Apple have a feature similar?

    I have looked at that but haven't been able to figure out how to use or edit the stamp.  Is there a place
    to set up time/date stamping, or maybe it's to be done manually?  In either case, I haven't been able to figure how to do a stamp that is anything other than the stock stamp.

  • HT4995 Location Services and Automatic Date & Time

    What do you do when selecting 'Set Automatically" in the Settings>General>Date & Time is not accurate?  Also what should be done when Location Services, specifically the Maps app, through wi-fi at home are inaccurate?  Both are showing the time zone and location of the home I just moved away from.

    - For location, the iPod uses the location of nearby wifi router that are in Apple's database. It sounds like you took the router with yo and Apple has not yet updated their database. They update it via information obtained from iPhones. There is not way to tell Apple to update an individual router.
    - Do you have the right time zone select in Settings>General>Date&Time? That is not part of the Automatic setting.

  • Automatic date & time not working on my iPhone 4S

    Anyone got any ideas on why, when I set date & time to change automatically, does my iphone 4s revert to London time regardless of where I am?

    Switch to manual and the time where you are. Do it several time then return to automatic. Correct time should stand

  • Automatic Date & Time not working in Pages 5

    I have some templates that I had created with Pages 09 which have Date & Time fields that are set to auto update.  When I open those templates in Pages 5, the dates are displayed as 7 days in the past.  When I right-click on the field to edit it, I don't see any such option to edit the date like I did in Pages 09. 
    So I tried inserting a new Date & Time field.  This inserts today's date as expected, but there is still no way to edit the date in any way (formatting, auto update option, etc.) that I can find.  Is this a bug, or am I missing something?

    It might be that you need to recreate your document and tables in Pags 5 and then resave it as a template.  Pages '09 gave an "update on open option" with a date insert wich is not there in Pages 5.  So simply insert the today() or now() function into a table cell in Pages 5 and it will update to the current value.  When you select the cell in the table with either of these functions, the Format inspector Cell tab gives you the option to format these calculations further.

  • How to insert automatic Date/Time Stamp on filename?!

    I have a simple chart that I fill out for work hours and whatnot every day with the Numbers program.
    I would love to have the date inserted into the filename automatically so that I don't have to manually enter it every day when I save.
    Is this possible?

    --
    --[SCRIPT savewith_date_timestamp]
    Enregistrer le script en tant que Script : savewith_date_timestamp.scpt
    déplacer le fichier ainsi créé dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
    Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
    Aller au menu Scripts , choisir Numbers puis choisir savewith_date_timestamp
    Le script enregistre les documents Numbers ouverts ayant été modifiés.
    Il crée également une copie dont le nom inclut la date et l'heure.
    --=====
    L'aide du Finder explique:
    L'Utilitaire AppleScript permet d'activer le Menu des scripts :
    Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
    Cochez la case "Afficher le menu des scripts dans la barre de menus".
    Sous 10.6.x,
    aller dans le panneau "Général" du dialogue Préférences de l'Éditeur Applescript
    puis cocher la case "Afficher le menu des scripts dans la barre des menus".
    --=====
    Save the script as a Script: savewith_date_timestamp.scpt
    Move the newly created file into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
    Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
    Go to the Scripts Menu, choose Numbers, then choose "savewith_date_timestamp"
    The script save open and modified Numbers documents.
    It create duplicates with date_time stamp appended to the file names.
    --=====
    The Finder's Help explains:
    To make the Script menu appear:
    Open the AppleScript utility located in Applications/AppleScript.
    Select the "Show Script Menu in menu bar" checkbox.
    Under 10.6.x,
    go to the General panel of AppleScript Editor’s Preferences dialog box
    and check the “Show Script menu in menu bar” option.
    --=====
    Yvan KOENIG (VALLAURIS, France)
    2010/11/11
    --=====
    on run
    -- my savemodifieddocuments("Pages")
    -- my savemodifieddocuments("Keynote")
    my savemodifieddocuments("Numbers")
    end run
    --=====
    on savemodifieddocuments(theApp)
    local titres, aDoc
    tell application "System Events" to set titres to title of processes
    if theApp is in titres then
    tell application theApp
    repeat with aDoc in every document
    if modified of aDoc then
    save aDoc
    tell application "System Events" to my duplicatewith_date_timestamp(path of disk item (path of aDoc))
    end if
    end repeat
    end tell
    end if
    end savemodifieddocuments
    --=====
    on duplicatewith_date_timestamp(fichier) (* fichier is an HFS path*)
    local Nom, ext, dossier, nomZip, source, dest
    tell application "System Events" to tell disk item ("" & fichier)
    set Nom to name
    set ext to name extension
    set dossier to path of container
    end tell
    set source to quoted form of POSIX path of (fichier)
    set Nom to text 1 thru -(2 + (count of ext)) of Nom
    set nomZip to Nom & (do shell script "date +_%Y%m%d-%H%M%S") & "." & ext
    set dest to quoted form of POSIX path of (dossier & nomZip)
    do shell script "ditto " & source & " " & dest
    end duplicatewith_date_timestamp
    --=====
    --[/SCRIPT]
    Yvan KOENIG (VALLAURIS, France) jeudi 11 novembre 2010 10:37:19

  • Automatic date & time 6 minutes slow on O2

    Anyone else see this? I noticed my iPhone & my PC didn't agree on the time this morning. I tried setting the iPhone manually but as soon as I switched the option back to *Set automatically* the iPhone time gets set 6 minutes behind every other clock in my flat. I assumes O2's time server is out but that seems like a quite a big discrepancy.
    tt2

    Maybe your PC is off and O2's time is correct?
    Or it could be the other way around.
    Try setting your time from here - http://www.atomic-clock.org.uk/atomic-clock.php

  • How to report with different time zone dynamically based on user's account?

    Hello
    I am wondering is there a way to change the report's date & time data based on user's locale setting in OBIEE?
    Let's say the user log in to OBIEE with eastern time zone setting. The data that's in the database is storing a transaction of $400 at 1am Pacific time.
    So when this user run a query which does something like 'select date, transaction, amount from date, transaction, sales where this = that', it should display the $400 amount done at 4am eastern time instead of 1am pst.
    What I have done is to have data stores in date dimension to be UTC time, and I have also changed the data type of the date column to be 'local time zone'. DB is Oracle DB 11G now.
    Now this query works perfectly well in the DB as long as I run the following commend first:
    Alter session set time zone = 'whatever my time zone'
    and then
    Select date, transaction from tables..
    The date displayed will automatically be converted into different time zone..
    Since everything is working nicely from Oracle DB level, I need to know how to make it work when OBIEE sends the same query down to the DB..
    I know that, probably I will have to enter the above alter session commend in the connection pool, however, I can't hardcode the time zone value.
    I also don't want to store user's time zone in the user table because these users travels a lot. So even if his table setting is EST, but at a given day he can be traveling to pst time zone and view reports.
    Is there a way to dynamically set the time zone based on user's account locale setting?
    Let me know if you guys have implemented something similar or not
    Thanks

    garuda wrote:
    Hello Sarvan
    I have already done that part at the DB level and it is working perfectly with alter session commend before the query.
    My question is, how do I configure OBIEE so that before each user runs a report from BI, the alter session commend will be fired with each user's personal locale time zone setting passed through so that each user will be able to view data according to their different time zone?did you tried with Connection scripts(Execute On connect) in Connection pool.write ur Alter commend to Change Time Zone in this script box.

  • How to avoid displaying date,time using Enhancement point.

    Hi friends,
    i have to work on the standard report.
    stadard report displays date,time ,reportname on the top of the page. my requirement is not to display date ,time,reportname.
    they have used the following code,
    WRITE text-001 TO m_line+d_offset(4). " Time
    WRITE sy-timlo USING EDIT MASK '__:__:__' TO m_line+d_offset(08).
    WRITE text-002 TO m_line+d_offset(05). " Date
    WRITE sy-datlo DD/MM/YYYY TO m_line+d_offset(10).
    BY using Enhancement point how to achieve my task.
    kindly help me

    Post Author: jsanzone
    CA Forum: WebIntelligence Reporting
    basham,
    You didn't mention which type of DBMS you are using (i.e. Oracle, MS SQL, MySQL, etc), but in a nutshell using MS SQL here is the principle.  Your time that is recorded in the records is dependent upon a setting in your RDBMS.  For instance, the RDBMS can use the machine time (which would most likely be local time), or it can use the machine time with an offset (to accomodate GMT, for instance).  GMT is factored differently based upon your time zone (and time of year, i.e. DST or EST, etc).  I'm on the east coast so right now my offset is GMT - 5, so if my time right now is 1457, then GMT is 1957.  To get SQL to compute an offset you must take the number of hours to offset and divide by 24 (24 hours in a day) and add that to the record in the database.  For instance, to get GMT right now I would use:
    select cast(getdate()5/24. as char(12))rtrim(convert(char(12),getdate()5/24.,8))' GMT'
    Hope this helps.  If you're on Oracle, then the mathematical principles remain the same, just the formatting will be different.

  • Generating Date Time Stamped Excel Sheet

    Hi
    I am working on Data Logging project and requirement is to log data data to excel sheet at one per second. Moreover the name of excel sheet should be automatic date time stamp generated. Can anybody help me in generating datetime stamp file name for this file which I have downloaded from ni website.
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    continuouswritespead.vi ‏26 KB

    Your program does not create an Excel File.  It creates a text file that Excel is able to open up and import.
    As it is right now, the name of the file you create is  determined by a dialog box that pops up with the old version of the Open/Create/Replace file that you have.  If you want the program to determine the file name, you need to build a file path out of string data in the same manner you are using the string coming from the Get Date/Time String function you have inside the loop.
    Message Edited by Ravens Fan on 04-25-2010 02:59 PM

  • Set Date & Time Automatically

    I have an Airport Extreme tied to a cable modem. I also have an Airport Express setup using WDS (remote base station). On both the Exteme and the Express I have checked "Set Data & Time Automatically" and selected "time.apple.com".
    The Extreme finally has the correct date and time. (And I assume year.) However, the Express keeps loggin this error; "No address for NTP server time.apple.com." (I am using the "AirPort Management Utility" to view the logs for each Airport.)
    I tried typing in the raw ip address for time.apple.com but it didn't change anything. Other then this minor issue both Airports are working fine.
    What am I doing wrong?
      Mac OS X (10.3.9)  

    Your setup is similar to mine but my Express is in Client Mode not WDS. Here are some of the log entries I see. After it powers up the time is wrong and it reports the same as you of "No address for NTP server time.apple.com." but after a short time it does!
    Dec 31 17:00:00 Severity: 5 Joined BSS [my AEBS-MAC address]
    Dec 31 17:00:01 Severity: 5 Initialized (firmware 6.3).
    Dec 31 17:00:11 Severity: 3 No address for NTP server time.apple.com.
    Dec 31 17:00:11 Severity: 5 Internet configuration leased (host 10.0.0.5/24 gateway 10.0.0.1 dns1 [my DNS servers] lease 1080).
    Jan 11 06:24:04 Severity: 5 Clock synchronized to network time server time.apple.com (adjusted +1136985823 seconds)
    Jan 11 06:27:31 Severity: 5 Disconnected from network.
    Jan 11 06:27:41 Severity: 5 Joined BSS [my AEBS-MAC address]
    Jan 11 06:27:49 Severity: 5 Internet configuration leased (host 10.0.0.5/24 gateway 10.0.0.1 dns1 [my DNS servers] lease 1080).

Maybe you are looking for