Report availabilty doesnt showup in the Cube

Hi Gurus
we have a cube and everyday full updates are loading to the cube thru process chains
we have delete overlapping req step in the process chain for this cube..
its a basic cube and it doesnt have any aggregates...
everyday around 20 requests load to this cube.,. but today, all the requests loaded for this cube and surprisingly there is no Report Availabiltiy symbol shows up even though all the reqs are successfull...
all the reqs in the cube are successfull without showing any RA symbol in the cube
when i checked the "manage" tab of the cube, no reqs are available fore reporting even though the reqs are successfull
i have already checked the transferred and added records...everything is fine and when i checked the infocube content, data is available, but no RA symbol shows up to any of the request
please help me....
appreciate your swift replies
regards

Gurus
I have checked althese options...
no job is running which loads to the cube...
refreshed cube many times in RSA1 and logged off and logged on ...but in vain...
still no RA symbol shows up... and all the technical and QA status of the reqs are green
wht to do i wonder??!!
cheerios

Similar Messages

Data doesnt come through in the cube

Hi all,
I loaded flat file in the cube, the data not in the cube but the data in PSA....
cube is normal cube, doesnt have aggreegates...just normal cube...
Please give me step by step...where do i look what should i do...
am new to bw
Thanks,
sidhartha

Hi
Am using BW 3.5 version, in the update tab, i did like this
Full update
Always update data, even if no master data exists for the data
and
error handling i selected, valid records updata, reporting possible (request green)
terminate after no errors: 9,999,999
in the processing tab,
PSA and Data tagets in parallel (package by package)
even i deleted request and loaded data several times but no use
still data not in the cube but in PSA
Please help me out from this problem
i will be very gr8ful to you....
thanks
sidhartha

Report does not show data , but data exists in the cube.

Hi All,
I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
It shows the data if I load directly from the extractor, but not when I load data thru DSO.
Any ideas.
Alex(Arthur Samson)

Hi Alex,
I am facing same problem, i have data in cube but in report i cant see....
i have created a generic DS, i loaded the data to DSO then CUBE.
data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
i think you solve this issue... plz help me to resolve this issue.
Regards,
SHAIK.

No Reporting Symbol for the cube.

Hi all,
no reporting symbol for an cube.
I created Z cube without any aggregates and loaded data sucessfuly QM status is green but i'm not able to see the reporting symbol next the request id. When i checked in manage content data, data is available for the fact but not for any dimension table.
Please go through the following when we did the diagnosis.
Diagnosis
    There is an inconsistency between the load status of the data and the
    option of reporting on this data.
    There is data in the InfoProvider that is OK from a quality point of
    view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000003343, number
    REQU_44ROL5YBBCJMDL5HQ8TVBAER6.
Procedure
    Choose Refresh to remove the inconsistency.
As per the procedure we did but went to short dump
UNCAUGHT_EXCEPTION
CX_SDB_ORA_PROGRAM_ERROR
Highly appreciable if any one could resolve our issues.
Thanks in Advance.

Hi Niyati,
What is your BW version. If it is BI 7.0 then check these OSS Notes:
975948 No update statistics for newly created tables
998904 Statistics check shows red or yellow traffic lights
If it BW 3.X version then run the RSRV check for the cube.
Bye
Dinesh

How the data is fetched from the cube for reporting - with and without BIA

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens

How the data is fetched from the cube for reporting

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at          ***** Records, Selected     *****Records, Transported
Cube A     *****             blank                 *****           0.624305         *****          8,087,502        *****             2,011
Cube B     *****                     E   *****                      42.002653 *****                  1,669,126            *****                    6
Cube B     *****                     F *****                     98.696442    *****                  2,426,006       *****                    6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi Jay,
Thanks for sharing your analysis.
The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
Thanks,
Krishnan

Key Figure values in the Bex Report are different from the cube

Hi all,
When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
Could some one help me find a solution to this issue.
I look forward to hearing from the experts.
Regards,
S.P

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

Customer master Query report doesnt pick all the customer account groups

Hello experts
We have a custom Query report created using customer master tables KNA1,KNVV,KNB1 etc. We have customers maintained under 5 customer account groups. One of the selection fields in the query is account group. But it displays customers only in 4 of the 5 account groups for some reason, even though we have customers maintained in that group(prospective customers).
Any reason why this could occur? How do i ensure that customers from all account groups are visible?
Thanks in advance

Hai Ravi
In SAP query if you join
KNA1 - KNB1- KNVV
General - Sasles data - company data
May be your 5th Account type is created without company code data.
The query will display only if the data is linked in all tables.
In case if you don't have company code data but you want the details of the account group customer
In the query join screen.
Right click on the joining line between KNB1 and KNVV and select Left outer join.
Now run the report , it will show all the account group data.
Regards,
Mani

Error,when executing "contents in the cube & a report in the bex analyser"

Hi,
If i execute a cube contents,i am getting this message "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error data has not appeared,only structure appeared in the cube.
When we execute a query in the BEX, we got the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
Please let us know what can be the problem and the solution.
Thanks in advance and best regards.
kumar.

Hi Dhanya,
thanks for your quick response,
it is helping more for me,
but i have some query's for this.
ie i made proper installation for activation 0infoprov(BusinessContent info objective) at BI Content Level. but it appears as inactive mode at modeling level. when,i made activation of 0infoprov, it is asking "0LOGSYS" must be an attribute, but i given "0LOGSYS" as attribute for this 0INFOPROV, however it shows some other errors at the time of activation, it appears as Inactive mode only, means it is not activating at this modeling level.
At the time of activating "0infoprov" it is asking, insert the "0logsys" must be an attribute.why?
the info objective 0infoprov is appears as inactive mode at modeling level0.
please let me know,what will be the problems for activating "0infoprov".
plz respond quickly.
kumar.
Edited by: kumar kumar on Dec 10, 2008 5:35 AM

Fields in the cube

Hi Experts
Here client wants 200 fields in cube
whether that is suggestable help me in this
Regards
Anand

Hi,
Its possible to have that many fields in the cube, but you have to consider what the reporting requirements are and how the data is connected, etc. You also have to consider how much data volume is going to be generated and at what level you are going to store the data in the cube. If your client is suggesting you to have line item level or granular data in your cube , suggest to them to have that in an ODS and provide jump queries from the cube to the ODS if necessary.
If many of the fields are not going to be required for reporting at present or in the future, suggest to the client to have them in the ODS and a smaller subset of the fields in the cubes.
Cheers,
Kedar

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

Could not see loaded data in the Cube

Hi Gurus,
Pl. help me in this: I am not able to get teh data loaded into the cube. In PSA it is loaded right. after that I created Transformation on InfoCube and I got Proposal Generated. Then I created DTP and executed, and monitor shows green. but when I right click on the cube and look for data(also maintain master data on InfoObject), I see only the headers of the table but no data is displayed.
I hope you have similar situations. Thanking you in advance.

Check if the request is reportable, sometimes the load could be fine, but the request may not be reportable. Make sure in your start routine you don't have a routine which will filter or delete the data out from the cube before it gets update.
thanks.
Wond

Data in the cube/ ODS?

Hi all,
I would like to ask one simple question. Can someone tell me how to check if infocube/ ODS contains data (instead of checking it by runing reports in BW Analyzer). Thank you.
Best wishes,
John

Hi John,
In RSA1, find your cube or ODS > right click > Manage > Requests tab. Here you can see the data that has been loaded to the object.
You can also move to the contents tab and look at the contents from here, or at least click on Number of records to get an idea of the volume of data.
Or in SE16 > /BI/A<b>YrODS</b>00 for the ODS active data table and /BI/F<b>YrCube</b>for the cube fact table.
Hope this helps...

Data in the cube is showing multiple entries when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika

Report availabilty doesnt showup in the Cube

Similar Messages

Maybe you are looking for