Report Builder 10g does not start on Windows 7 (stays minimized)

When i run the report builder 10g in my Windows 7 machine, the splash screen appears for some time and then it minimizes to the task bar. Thinking that it has loaded and gone to task bar, if i click the icon on task bar, it shows another splash screen and loads another copy of Report Builder, which also minimizes to same icon.
On right-clicking the icon there is no maximize button. I tried running it as administrator and also fix the compatibility, but nothing worked.
This issue starts only after some days of installing the developer 10g. It worked ok for some days and then it started behaving like this. Seen this twice now, both times on re-installing the developer suite the issue goes away.
Is there any way to solve this other than re-install the Oracle Developer ?

Hello,
Did you check the files cagprefs.oar and cauprefs.ora ?
Re: report builder
regards

Similar Messages

PE 9 does not start on Windows 7 Ultimate 32 bit

No matter how I try to start PE 9, it does not start.
From Welcome Screen -> New Project: nothing happens. Form Elements Organizer -> File - New - Premiere Elements Video project it takes some time loading all modules, libraries and sorts of things until an error message appears saying that PE 9 does not function anymore.
That's all, no error log or something like this. Please let me know what info is needed.
PS: Why does my cursor jump to the beginning when I press enter in text editor here?

Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various
parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle...
this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video
editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows
(or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on
drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in
the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the
type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum
http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but
eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual
disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Itunes does not start in Windows 7

Hi,
Itunes does not start anymore...
It used to work witout any problems. Any hints?
Thanks
Philofun

Restart Computer.
Refer steps here to delete SC file(s):
Win7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your QuickTime. START > CONTROL PANEL
WinXP - Add n Remove Programs
Win7/Vista - Programs n Features
highlight QUICKTIME and click CHANGE then REPAIR

Iphone 4 does not start, logo apple stays on screen

Help! My iphone 4 does not start.
The epple logo stays on the screen.
It seems like the setup keeps repeating.

If you haven't tried, Reset the phone by pressing the power and home buttons at the same time until the phone turns off. With itunes open try turning the phone back on if it didn't by itself. Itunes should ask you then to restore the phone.

Refresh of a Report Builder Dataset does NOT show newly added field

I'm working with Report Builder 2.0 (we don't plan on getting SQL 2008 R2 - so NO 3.0 for us!) and have found that if I have an existing report using an existing stored procedure (it has 4 existing parameters) and I add a new field to the stored procedure
it will not refresh the
data set.  I have gone to the DataSet properties and executed the query(SPROC) where it does show the new field (so I know the sproc will
execute), but when I click OK and hit Refresh Fields it stops responding.  I also tried the same steps without the Refresh Fields and still stops responding. I also tried to add the field name and it errored out as invalid.
The only work around I've found is to
create a new dataset referencing the updated SPROC with a different name, deleting the old dataset and then re-naming the newer dataset with the old
one's name so all the field references are the same.  I do know that in the case of renaming
a field in a sproc that this would end BADLY because there is no way any of the old field's references would work.
But it seems odd I have to go through so much to refresh for new fields, so perhaps I'm missing a step in dealing with this situation.  Any recommendations would be appreciated.

Hi CinBH,
I understand that the Report Builder 2.0 hangs while flush the dataset by executing the query. In that case, I think it is necessary to capture a user dump when the problem occurred. And then, you can send the dump to Microsoft CSS support. Support Professionals
from Microsoft will assist you to solve the problem.
I am providing the steps below for you to gather the hang dump or crash dump to further work on this issue,
Hang dump,
a. Open Report Builder as usual, and wait for a while.
b. When you found that the Report Builder application hang, and was not responding, please open TaskManager by one of follws,
- Pressing “Ctrl + Alt + Del” button and then click “Start Task Manager” item.
- Or right-clicking your task bar, click “Start Task Manager”menu.
c. Once the Task Manager opened, switch to Process tab, find the “Report Builder” process MSReportBuilder.exe.
d. Right-click the item, click Create dump file.
e. After that, it will prompt a window and let you know the location of the dump file.
You can copy the hang dump or crash dump file to your development machine configured with symbols files, and open it in Visual Studio 2008. Next, you can analyze the error / exception, and call stacks to see why the error happens.
Thanks,
Eileen

Lync 2013 Desktop does not start on WIndows 8.1

My Office 365 version of Lync 2013 64bit crashes every time I start it. There is no error message just the "Microsoft Lync has stopped working" message with Close option. In further looking for a solution, I found the suggestion to
uninstall the Intel Bluetooth drivers but my system uses Realtek Filter drivers. I have looked  in the event logs and found:
Log Name:      Application
Source:        Windows Error Reporting
Date:          2014-09-11 1:47:20 PM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      --------Win8
Description:
Fault bucket 85949488684, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lync.exe
P2: 15.0.4641.1000
P3: 53c5ce3c
P4: KERNELBASE.dll
P5: 6.3.9600.17055
P6: 532954fb
P7: e06d7363
P8: 0000000000005bf8
P9:
P10:
Attached files:
C:\Users\Yves\AppData\Local\Temp\WERCA6B.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Yves\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lync.exe_1f7a49ef615ca788e016ddaf8db0d1fb92c4a8e9_00000000_256fdc4d
Analysis symbol:
Rechecking for solution: 0
Report Id: aa908032-39db-11e4-8280-48d224dc5142
Report Status: 0
Hashed bucket: 61000269e077a9a343a6fe9bbb7efc54
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-11T17:47:20.000000000Z" />
    <EventRecordID>143379</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Fedmet-YL-Win8</Computer>
    <Security />
</System>
<EventData>
    <Data>85949488684</Data>
    <Data>4</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>lync.exe</Data>
    <Data>15.0.4641.1000</Data>
    <Data>53c5ce3c</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.3.9600.17055</Data>
    <Data>532954fb</Data>
    <Data>e06d7363</Data>
    <Data>0000000000005bf8</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
C:\Users\Yves\AppData\Local\Temp\WERCA6B.tmp.WERInternalMetadata.xml</Data>
    <Data>C:\Users\Yves\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lync.exe_1f7a49ef615ca788e016ddaf8db0d1fb92c4a8e9_00000000_256fdc4d</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>aa908032-39db-11e4-8280-48d224dc5142</Data>
    <Data>0</Data>
    <Data>61000269e077a9a343a6fe9bbb7efc54</Data>
</EventData>
</Event>
A lot of sites suggest to uninstall Intel Bluetooth drive but I does not have Intel Bluetooth.

Go to your computer manufacturer’s website and update all driver packages for your computer, especially:
Audio drivers
Bluetooth drivers
System chipset drivers
webcam drivers
Important Note:
If you use office 64 bit, Lync 2013 must be 64 bit also. {And vice versa, If you use office 32 bit, Lync 2013 must be 32 bit}
Also check answer of Eric to fix this issue
http://social.technet.microsoft.com/Forums/en-US/e8268935-e97c-4033-9a2e-02734b4390bf/lync-2013-client-on-windows-81-stuck-at-starting?forum=ocsclients
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Photoshop CS5 and CS6 does not start. Windows 7

I am using Photoshop CS5 as well as CS6, 64-bit on Windows 7. Since the last few days, I noticed that Photoshop would take a very long time to start (earlier it used to start within few seconds). Today, I found that both the Photoshop versions do not start at all. Nothing happens when I click the short-cut on the Task Bar. Neither do they start through the Start Menu. Why does this happen and what is the solution?

Have you tried using the task manager to see if Photoshop is hung and look at your windows reliability history to see if Photoshop CS5 an CS6 are crashing?

SAP Web Dispatcher does not start as windows service

Hi,
I have successfully installed and configured SAP Web Dispatcher. When I start the web dispatcher from command prompt, it works fine. I created a windows service for web dispatcher using the command
ntscmgr install sapwebdisp -b "c:\program files\sap\sapwebdisp\sapwebdisp.exe"
-p "service pf=sapwebdisp.pfl -cleanup -auto_restart"
The command successfully created sapwebdisp service. The service also starts fine, but web dispatcher does not get started.
Any ideas experts?

Hi,
Ok. Few suggestions.
1. Can you review the SAP note:
552286 Troubleshooting for the SAP Web Dispatcher
2. When you said: "web dispatcher does not get started ", what error you got ? Can you be more details here ?
3. Please check the trace file dev_webdisp" that generated in the work directory. If the log entries is not abvious, increase the trace level to 2 or 3, and reproduce and re-check the trace file.
4. What is the output of the command "sapwebdisp -v"
5. How about sapwebdisp.pfl ? Are those settings correct ?
Hope this helps.
Regards,
Vincent

Satellite A305D-S6848 does not start up - Windows failed to load

SCREEN SAYS "Windows failed to load because a required file is missing, or corrupt.."
file: ntoskrnl.exe
status: 0xc0000098
I DO NOT HAVE AN INSTALL DISK AND DONT KNOW HOW TO GET SYSTEM BACK UP AND RUNNING??
CAN SOMBODY PLEASE HELP ME ???

Hi
It seems to be a Toshiba US notebook series and therefore the recovery process might be different as on Toshiba European notebooks
However, the recovery procedure should be mention in user manual. Check this
Try firstly this:
Power up the unit and press F8.
Then choose Safe Mode and try to boot the Windows in safe mode.
If it does not work, try Repair the Computer option.
I think the notebook should be equipped with HDD recovery. This means that you could recover the unit without the usage of the recovery disk.
As mentioned this is US notebook series and as far as I know you have to press 0 button immediately after the notebook has been powered up.
This should start the recovery

Skype does NOT start with Windows Anymore (start S...

My Skype NO LONGER starts with Windows anymore!!! I HAVE to manually open Skype!!! I cheked the options and "start Skype with Windows" IS checked!!! I tried unchecking the option and rechecking it, made no difference!!! how do I fix??

Just because Skype isn't starting up automatically doesn't mean it isn't trying. Other applications you have loading at startup could be slowing down Skype's ability to start. You can run msconfig ( Start - Run (Wink key + R) - "msconfig". Under the startup tab you can see if Skype is set to start or not. You can also uncheck everything else but Skype and see if it comes up them. If it does, using a process of elimination you should be able to determine the application causing the probelm. If you do not see anything for Skype you can use the registry files provided to toggle that feature on/off just as the Skype program attempts to.
Attachments:
Start_Skype.zip ‏2 KB

Report Builder 6i will not start

I have developer 6i Report Builder and Form Builder on new laptop. Installation appeared to work fine. However, when I try to start Report Builder, it shows the splash screen for a few seconds and then it just goes away. The application will not open. Same for the Form Builder. I did Typical install for each, so I believe all requisite components have also been installed. Any suggestions would be appreciated.

Some progress, but still not there..... Last night I un-installed my 11g client and developer 6i. Then, I installed 6i first. I verified that I was able to open both Report Builder and Form Builder applications. Then I re-installed the 11g client. Again, I was still able to run both developer applications. HOWEVER, when I try to open existing reports, the Report Builder immediately closes without giving an error. When I try to open an existing form, Form Builder gives me "Failed to load in the color pallette". It appears to load the form, but when I look, it is missing most of the trigger and program unit data.

10 G installation does not start on Windows 2000 SP 4

Machine configuration:
Pentium 4 2.8 GHz
496 MB RAM
120 GB HDD
The temp folder log shows that all installer requirements are met.
Still the OUI window does not show up. Any ideas?

Hi Viking
First things first. Here are some things to consider:
1. If using Windows 2000, you need to be using Windows 2000 Professional with SP4.
2. You should not have any other Oracle software running during this install.
3. You also not have ORACLE_HOME, TNS_ADMIN or any of the other Oracle environment variables set.
4. You need to be a local administrator on the machine.
5. You should not have a firewall enabled.
6. You need to have a fully qualified domain name (FQDN) set for the machine.
7. The FQDN should be set in the HOSTS file which you can find in c:\windows\system32\drivers\etc
8. You need to check the certification matrix for 10.1.3.2.0 and make sure it is available for Windows 2000 and that there are no other prerequisites?
Does any of this help?
Regards
Michael

Firefox does not start in Windows Vista. It can be seen in the task manager that the process is running. But nothing happens. After deleting the process it still does not work.

Are there any issues with Firefox 10 and Vista? IE works.

Hi webero,
There are no Known Issues that I am aware of. You should take a look at [[Firefox is already running but is not responding]] and our article called [https://support.mozilla.org/en-US/kb/Firefox-not-start Firefox will not start].
Hopefully this helps!

MacBook Pro can turn on and off, but does not start up. Stays on white screen with flashing folder icon, does not go to desktop.

MacBook Pro is not starting up. It just stays on a white screen with a flashing folder icon. Have tried restarting while holding the Option key, and the cursor becomes visible and movable, but it does not go to the desktop.

Hello Sonya_Rose,
I found this article when researching the issue you describe here named A flashing question mark appears when you start your Mac found http://support.apple.com/kb/ts1440.
Check the mouse and keyboard
This issue might occur if a mouse or trackpad button is pressed during startup. Make sure the button isn't pressed.
If the issue persists, shut down your Mac with its power button, disconnect any external mouse and keyboard, then turn on your Mac with its power button. If the flashing question mark issue persists, reconnect the keyboard and mouse.
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.
Regards,
Sterling

"Reporting services" service does not start automatically

I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log:
1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect.
2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
If i select "start" from service's context menu then it starting normally and it's state becomes Running.
What can i do to make reporting services starting automatically on system load?

i have the same problem here in one of our servers ,, it was working and suddenly it stopped i don't know why
when i reviewed the Event Viewer :
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 8/22/2010
Time: 12:05:26 PM
User: N/A
Computer: SERVICE-CENTER
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. ---> System.UnauthorizedAccessException:
Access to the path 'C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer\RSReportServer.config' is denied.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at Microsoft.ReportingServices.Diagnostics.Globals.SafeOpenXmlDocumentFile(XmlDocument doc, String pathToXmlFile)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.LoadDocument()
   at Microsoft.ReportingServices.Diagnostics.R...
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any body can help with this ,, because i didn't find anything helpful till now !!!
dear all
i installed SQL Server 2005 SP2 and it solved my problem
wish you all luck

Report Builder 10g does not start on Windows 7 (stays minimized)

Similar Messages

Maybe you are looking for