Report Builder 6i & 10g crashes

Hi,
I have installed both Report Builders 6i and 10g. When I try to open just the builder (Did not create or open any report) both of them are crashed after few
seconds. Moreover, I also could not see any Icons in the Tool bars in the reppot builder when the Report is open for that few seconds.
I am opening one at a time.
My machine is Windows XP. I am also getting alrerts saying that Service Pack 3 is missing in the OS and need isntallation. How ever I have ignored that.
Does it causes any issue to Builder.
Any pointers are helpful.
Regards,
Ram

Hi All,
Issue resolved by applying patches 566304.1 & 361206.1. Also couple of Microsoft Recommended updates are done for the XP.
Thanks for your responses.
Regards,
Ram

Similar Messages

Report Builder is crashing... 6i, 9i and 10g

Dear All,
During my experience with all versions of report builder, all versions crash from time to time when building reports.
Is there any way to get rid from this??
Regards,
Joe

I noticed crashing of the builder on Windows 2000 running in VM. After applying SP4 on Windows 2000 the issue was gone.
Crashing is mostly caused by wrong datamodel coding is my experience.
Marcos

Reports Builder Crashes

Hi,
I just installed the Oracle9i Developer Suite. I'm trying to launch Report Builder and it crashes right from the get go every single time. Any ideas?
Thanks
Chad

Most likely you have something wrong in your environment settings. The best place to look is
a. in the registery (under local_machine, then oracle, ...)
b. path.
Here's the ultimate solution for env confusion: you runReportsBuilder.bat
(I pasted below):
set ORACLE_GROUP_NAME=Oracle - OraHome90
set ORACLE_HOME_NAME=OraHome90
set ORACLE_HOME=D:\orawin90
set NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
set ORACLE_HOME_KEY=Software\ORACLE\HOME0
set SQLPATH=D:\orawin90\dbs
set CA_GPREFS=d:\orawin90
set CA_UPREFS=d:\orawin90
set CORE40=d:\orawin90\core40
set NET80=d:\orawin90\network
set OCL25=d:\orawin90\tools\common90
set OTM25=d:\orawin90\otm25
set RW=d:\orawin90\reports
set REPORTS_TMP=d:\temp
set REPORTS_PATH=d:\orawin90\reports\templates;d:\orawin90\reports\samples\demo\reqfiles;
set TK90=d:\orawin90\tools\common90
set VGS90=d:\orawin90\tools\common90
set DOC90=d:\orawin90\tools\doc90
set D2DOCREP=d:\orawin90\reports\doc
set PLSQL80=d:\orawin90\plsql80
set GWIZARD60=d:\orawin90\graph60
set GRAPHOGD60=d:\orawin90\graph60\gwiz_ogd
set RDBMS80=d:\orawin90\rdbms80
set PLUS80=d:\orawin90\plus80
set PRO80=d:\orawin90\pro80
set PROC_DFLT=PROC80
set DE90=d:\orawin90\tools\common90
set MM90=d:\orawin90\tools\common90
set ID=0
set UI_ICON=d:\orawin90\reports\plugins\resource
set UI90=d:\orawin90\tools\common90
set BROWSER90=d:\orawin90\browse90
set BROWSER=d:\orawin90\browse90
set REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar
set REPORTS_CLASSPATH=d:\orawin90\reports\jlib\rwbuilder.jar;d:\orawin90\reports\jlib\rwrun.jar;d:\orawin90\jlib\zrclient.jar;d:\orawin90\j2ee\home\oc4j.jar;d:\orawin90\j2ee\home\lib\ojsp.jar;
d:
cd d:\orawin90\bin
PATH=d:\orawin90\jdk\bin;d:\orawin90\jdk\jre\bin\classic;d:\orawin90\jdk\jre\bin;d:\orawin90\bin;%path%
rwbuilder

Getting error in report 6i database 10g in thin client

Hi,
I have one report in which button, i am calling anothere report on that button in
6i report builder and 10g database.
this report is working fine in thick client getting error in thin client
rep-1418
Thanks
Reena

You post so few info
Have a look here, Maybe could be it helps
http://www.oracle.com/webapps/online-help/reports/10.1.2/state/content/navId.3/navSetId._/vtTopicFile.htmlhelp_rwbuild_hs%7Crwrefex%7Cplsql%7Cbuiltins%7Csrw%7Csrw_null_arguments~htm/

Oracle Report Builder Bugs

If the JSP file generated by Report Builder contains the statement,
<systemParameter name="DESTYPE" initialValue="Screen" display="yes"/>
you will receive the following error message when you try to run the report in Web Layout:
javax.servlet.jsp.JspException: REP-56092: No class defined for destination type Screen
I found the only solution to be to remove the offending statement, or set its display parameter to no. (The statement can be found in the JSP file under the <data> tag.)
This statement displays the Runtime Parameter Form dialog which is intended only for Paper Layouts. Seems as if Report Builder is reading a Paper Layout statement from the JSP file when it is executing a Web Layout command.
Another minor problem occurs when you open a report and attempt to display it in Web Layout before connecting to the database. When the Connect dialog appears, the mouse pointer remains as an hour glass.
The Report Builder came packaged with Oracle Developer Suite 10g, but the Report Builder's Help About shows version 9.0.4.2.0. However, I noticed that other copies of Oracle Developer Suite 10g came packaged with Report Builder version 10g. I can't say whether the above problems apply to these later versions of Oracle Builder or not.

Hi,
There's a dedicated forum for Oracle Reports and I would suggest you to post your questions there to get answered by those who are experienced in Oracle Reports.
I did work with Oracle Reports a long time ago, so as I remember, you have to create a link between colb and colc fields. When colb is null then this link will pull over colc and print it in place of colb.
Hope this helps.
Regards
Asif Momen
http://momendba.blogspot.com

Pls-Help! Report Builder won't open( rwbuilder.exe -Bad Image)

Hi all,
I am having a problem opening the report builder oracle 10g.My Form builder opens and works fine.When i click on report builder i get a pop-up window with following error message:
the application or dll c:\DEVSuiteHome\bin\rw90.dll is not a valid windows image.Please check this against your installation diskette.
What should I do to get my report builder working.

Thanks!
I tried to reinstall 5-6 times , but to no avail.
I tried a different cd from my friend and installation had no problem .
My Oracle Forms and reports just works fine now.
Thanks again.

Report Builder 6i crashes while compiling

I have report builder 6.0.8.11.3, running on Windows XP SP2.
I am connecting to a 10g database and compiling a custom report.
This report was running fine in the database, i just copied to my folder and compiling from local system (connecting to the 10g server). So this is not a code issue.
After compiling 50%, the report builder crashes with this message: Report Builder has encountered a problem and needs to close.In more information, the error signature is given as AppName:rwbld60.exe AppVer3.0.0.0 ModName ora805.dll ModVer 0.0.0.0 Offset 00046d68.
We have re-installed Report Builder/Windows/Oracle client from scratch many times but not able to solve this issue.
Please let me know of any pointers in this regard.
Thanks
Manu

dude dude we get the same error hell of times ..its a bug in report builder ..it suddenly crashes in unexpected situations and oracle is no longer supporting 6i builders ..i think its time for you to migrate to 10g developer suite.
or else recreate the layout and try ..i have done that for many reports becuase for some reasons layout gets corrupted.
All the best

Reports Builder 10g hanging while printing

Hi all,
We have a printing issue with our Reports Builder 10g. When I run a report, select FILE and PRINT and click o.k, Reports Builder hangs where it trys to format page one. Any suggestions?
Thanks,
Mike

Strange, my ReportBuilder works with File/Print but hangs when printing from the print icon.
ReportBuilder is not a robust product. It hangs and crashes frequently. Little has been done to correct. Except for the auto-save/crash-recovery feature - that is a job saving addition to the product.
That said, lots-o-features get added from one release to the next, but precious little attention seems to be given to improving stability.

ORACLE reports Build 10g - Data Model - query - If statement in Alias ?

I have the following select statement. It has the alias Survivors, Deaths and "All
With the ORACLE reports Build 10g - Data Model - I have the following query statement. I require the alias to change. Can the following be done.
Cases". Is it posible to use :P_LANGUAGE variable to say that -- IF :P_LANGUAGE = FRENCH THEN alias are Survivants for survivors, Décès for Deaths, Tous_les_cas for All Cases. Please advise
SELECT ALL T_NTR_MULTIBAR.CAT, T_NTR_MULTIBAR.NUM_CASES_LEFTBAR AS Survivors,
T_NTR_MULTIBAR.NUM_CASES_MIDDLEBAR AS Deaths, T_NTR_MULTIBAR.NUM_CASES_RIGHTBAR AS "All Cases"
FROM T_NTR_MULTIBAR
WHERE INSTANCE_NUM = :P_INSTANCENUM
order by ORDERS

It is no problem, you can automatically change the complete query before the report is running, which delivers you different kind of values. But the alias names does not change in the group of the data-model, although two query are running with different alias names at different times. In the data model you see the alias names of the first implemented select statement, which are the column fields in the layout.

Issue is TEXT_IO application API is not working in report builder 10g.

Issue is TEXT_IO application API is not working in report builder 10g.
TEXT_IO application api is working in report builder 6i. (Not working in upgrade from Oracle EBiz 11i to Oracle Ebiz R12)
I saw that details in some forums, client_text_io is available for form builder 10g.
Is any other api available for report builder 10g?
If it is available what steps we need to do?

All the CLIENT_% procedures are part of webutil in Forms. Forms uses the Java applet on the client PC to perform actions on the local PC via webutil. This is not possible for Reports.
You can still use text_io on the server, but you need some other way to copy the files to/from the client PC.
I wonder how you used the functionality in EBS R11. Even R11 uses web reports, so text_io already worked on the server, not the client PC.

How i can save report updation on report builder 10g

how i can save report updating on report builder 10g
please help me
any help will be appreciated

See anwer in :
why no body try to help me its possible no body has idea about how to save

Dynamic Order By on Report Builder 10g

Hi,
How can I do a dynamic order by clause using user parameters on Report Builder 10g? I need to set dynamically the column and the direction on the clause.
Thanks.
Bruno Galletti
Brazil.

Hi Bruno / Rainer,
I am implementing the same solution, and after adding the lexical parameter reference in the SQL statement and calling the report from Oracle Forms the report failed with the following error on the report server:
Terminated with error: <br>REP-300: missing expression select wcsr_no , wcsr_date , wcsr_rec_week_zone , wcsr_loc_house_num || ' ' || wcsr_loc_pre_dir || ' ' || wcsr_loc_street_name || ' ' || wcsr_loc_street_type || ' ' || wcsr_loc_post_dir || ' ' || wcsr_loc_unit || ' ' || wcsr_loc_city || ' ' || wcsr ==>
No change has been done to the SQL statement except adding the &p_orderby parameter at the end of the query.
Any suggestions? Are all parameters defined as "bind" parameters on the Repotr Object Navigator.?
Thanks
Gabriel Aguirre
[email protected]

Report Builder 10g does not start on Windows 7 (stays minimized)

When i run the report builder 10g in my Windows 7 machine, the splash screen appears for some time and then it minimizes to the task bar. Thinking that it has loaded and gone to task bar, if i click the icon on task bar, it shows another splash screen and loads another copy of Report Builder, which also minimizes to same icon.
On right-clicking the icon there is no maximize button. I tried running it as administrator and also fix the compatibility, but nothing worked.
This issue starts only after some days of installing the developer 10g. It worked ok for some days and then it started behaving like this. Seen this twice now, both times on re-installing the developer suite the issue goes away.
Is there any way to solve this other than re-install the Oracle Developer ?

Hello,
Did you check the files cagprefs.oar and cauprefs.ora ?
Re: report builder
regards

Report Builder 10 Crashing while generating to pdf

I can get a report to show all the pages in previewer mode.
However, when attempting to generate to pdf, report builder crashes at random times. Not at just one page, but whenever it feels like it.
Report is 4,000 pages, but I've ran 15k page to pdf before. And it is NOT the report, it crashes on all reports.
We've had some recent windows security updates pused to us recently, but that is it as far as system changes go.
Environment:
Win XP, SP3
Report Builder 10.1.2.0.2
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production

Report Builder 10.1.2.0.2That is the base version of Developer Suite that you can download on OTN. I would at least start with upgrading to the latest patch, especially since you connect to an 11g database.
Another thing: do you have this problem in Reports Builder, or on the application server? Latter case: check your AS version against the certification matrix too.
Edited by: InoL on Jan 27, 2011 11:37 AM

Use css file in oracle 10g report builder

hi every one
i am using oracle 10g report buidler. i want control paramform by usign css file.
any body have idea how can i use css file in oracle report builder 10g and how can i modify it's path and i how can i manage any css class on a perticular field.

Thanks Billy.
Yes you are right.
Here why I discarded that option is,
I may get the source files with changing layouts.
My Actual scenario is as follows.
Initially we developped all the things using PL/SQL packages. Its working fine.
But as per the inputs we received from requirements group, the file structure changes dynamically. and we would able to consider those new columns also. We should be able to changes the rules dynamically.
Lets say, we doing fullouter join on Src_A and Src_B. on columns col1_A and col1_B.
Now the requirement changes in a way that, the join should be done on Src_A and Src_C. on columns col1_A and col_C.
For this I need to define a new package.
Instead of that, I would like to do everything dynamically based on configuration parameters given as input.
Thank you,
Regards,
Gowtham Sen

Report Builder 6i & 10g crashes

Similar Messages

Maybe you are looking for