Report Builder 6i compatible with database 9i?

We just upgraded to 9i database and all are applications are working but
when I try to run Report Builder 6 - i try to connect to database and once I
enter the logon info click Ok the report builder comes down. This happens on the
runtime also. Is Report builder 6 able to run against 9i database?

Yes, Reports 6i is very much compatible with Oracle 9i database.
I think ur issue relates to something else.
U can update with more info so that will be getting clear idea abt the issue.
thanx,
cheers,

Similar Messages

Add management server: Setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0

I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
Maybe there is a newer setup installer? But I can't find it.
[10:42:54]: Error:
:Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read returned true. so far, this is OM DB, not an empty DB
[10:42:54]: Debug:
:Connection was not open. We will try to open it.
[10:42:54]: Debug:
:SqlConnectionReady returned True.
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read did not return true. The MG is missing. This is not OM DB
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Always:
:Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.

Never mind, found it!
Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
CLR Types for Microsoft® SQL Server® 2012 and now it works!!

EXP-00037: Export views not compatible with database version

kindly help with this error. We have already run catexp.sql but still that is not helping, we are still getting the same error.
we are exporting 8i db.
Export: Release 8.1.7.0.0 - Production on Thu Feb 21 14:34:25 2008
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
EXP-00037: Export views not compatible with database version
EXP-00000: Export terminated unsuccessfully

Does this apply to you?
Error: EXP 37
Text: Export views not compatible with database version
Cause: The Export utility is at a higher version than the database version
and is thereby incompatible.
Action: Use the same version of Export utility as the database.

SAP and XL Reporter are both compatible with Microsoft Office 2007.??????

Please confirm that SAP and XL Reporter are both compatible with Microsoft Office 2007.

Darpal,
SAP Business one supports Microsoft office starting with 2005 A patch 15 and up. You can see the specifics on supported platforms at this link
[https://service.sap.com/smb/sbo/platforms]
Regards,
Lucas

CR11 Report Viewer not compatible with MFC10.0

I upgraded to the Visual Studio 2010 (from 2008) last week. After the upgrade I recompiled all my applications and everything worked as expected except for the CR11 Report Viewer.
The latest MFC version (10.0) causes an "Unhandled Exception at xxxxx in yyyyy.exe 0xC00000005....Access Violation". This occurs in the MFC code where "DoVerb" is being called on the CR OLE object.
Because VS2010 allows applications to be recompiled to use a prior version of MFC I recompiled using the 9.0 version (the version from VS20008) and my "Print Preview" dialogs (which use the CR11 Report Viewer Component) work correctly.
It seems the Report Viewer is NOT compatible with MFC 10.0 (note: MFC10.0 doesn't interfere with the RDC because I can print reports from the applications; it's only the viewer that causes the application exception).
Does anyone know how to 'fix' this problem with MFC10.0/CR11Viewer?
Thanks,
Randy

Hi Randy,
Because you are using the RDC in a C++ app there may be a work around, although it's still not officially supported. Download CR XI R2 and patch yourself up to Service Pack 6. SP 4 is a full build and then apply SP 5 and then SP 6.
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Also, we have not supported MFC classes for a long time now so if you can avoid using them that may help too, or at least within the RDC API's.
I'll check with our PM's to see if there is anything we can do as far as escalating this issue but I doubt it.
Your only option may be to use the 9 version as you noted it still works.
Thank you
Don

Report builder, image issue with PDF output

hi there,
i generate report to PDF. i got the company logo on the header. everything is working fine. my pdf is generated and my letter comes out nice and proper.
now once the PDF is generate and i view it on adobe reader, i want to protect the logo from been copied. like, when u click on the image and then right click on it, it gives u the option to copy image. i want to protect this from happening. i dnt want the logo to be able to be copied.
anyone know on how i can protect the images from been copied. or direct me to a site where i can find some help.
thanks in advance.
cheers
The software and version i am uising
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning option
JServer Release 9.2.0.5.0 - Production
Report Builder 10.1.2.0.2
ORACLE Server Release 10.1.0.4.2
Oracle Procedure Builder 10.1.2.0.2
Oracle ORACLE PL/SQL V10.1.0.4.2 - Production
Oracle CORE 10.1.0.4.0 Production
Oracle Tools Integration Services 10.1.2.0.2
Oracle Tools Common Area 10.1.2.0.2
Oracle Toolkit 2 for Windows 32-bit platforms 10.1.2.0.2
Resource Object Store 10.1.2.0.2
Oracle Help 10.1.2.0.2
Oracle Sqlmgr 10.1.2.0.2
Oracle Query Builder 10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 10.1.2.0.2
Oracle XML Developers Kit 10.1.0.4.2 - Production
Oracle Virtual Graphics System 10.1.2.0.2
Oracle Image 10.1.2.0.2
Oracle Multimedia Widget 10.1.2.0.2
Oracle Tools GUI Utilities 10.1.2.0.2

You can configure a custom destination (securePDF) to enable PDF security settings.
Check out the following thread Re: how can prevent user for printing report
Edited by: Rodolfo Ferrari on Jun 18, 2009 11:25 PM

Will Report Builder 2012 Work with SQL Server 2008???

Simple question really
Will Report Builder 2012 work in conjunction with SQL Server 2008???
Is it worth while upgrading?
The main reason i ask is the ability to export in an xlsx format
Thanks

Hi Gmach,
The version of Report Builder on SQL Server Reporting Service (SSRS) 2012 is Report Builder 3.0. The Report Builder 3.0 manufactures 2010 RDL reports, so it only works with the version of SQL Server 2008 R2 or later. So in your scenario, we can no connect
to SQL Server 2008 Server using Report Builder that on SSRS 2012.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

Can't get Report Builder to work with Apache Webserver

I'm running ColdFusion 7.0.1 and have it configured to work
with Apache. I've got an application named realestate. I created
the following entry in my host file:
127.0.0.1 realestate
In Apache, I've created a virtual server that uses the
realestate server name. But I can't get the Report Builder to
connect to it at all. When I run the wizard, I try to install an
RDS server. I've used 127.0.0.1 for the host name as well as
realestate and I've set the port to 80. I can't get port 8500 to
work at all. I set my ColdFusion root location to fall under
Apache's htdocs. Should I have left it under C:\CFMX7 ? How would I
change the location?

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Reports: is it compatible with Dreamweaver?

Is Reports compatible with Macromedia Dreamweaver?
In other words, is it possible to view the taglibs generated with Reports into Dreamweaver?
Thanks

[[Will Firefox work on my mobile device?]]

Create Pie Chart and Vertical bar chart using report builder 3.0 with sharepoint custom list

Hi All,
I have a client requirement to create reports which should show the graphical representation of SharePoint Custom List data. The reports are Month wise and YTD. Also i have to create dashboard.
For creating reports, i have heard about Report Builder and SSRS. I have SQL server 2008r2 and installed report builder 3.0 but i am not aware of creating reports(KPI, Pie Chart, Vertical bar, etc.,) with sharepoint customlist.
Can some one please help me on this.
MercuryMan

Here is some information about using the SharePoint List Data source with SSRS/Report Builder/BIDS:
http://www.infotoad.com/blog/post/2012/10/11/using-a-sharepoint-list-connection-type-as-a-data-source-for-reporting-services.aspx
http://technet.microsoft.com/en-us/library/ee633650.aspx
http://www.codeproject.com/Articles/24469/SQL-Reporting-Services-data-from-SharePoint-lists
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Is Financial Reporting 9.3 compatible with Essbase 7.x?

Can Financial Reporting 9.3 be used against Essbase 7.x applications?
Thanks,
Dan

It's even compatible with essbase 6.5.1, I created a proof of concept as an example against an old data source and it seems to work as well as the current 931 version.

Report Builder 3.0 odbc database name using parameters

I am using an ODBC connection for my Datasource in a report (MYSQL).
I have a valid connection for the report using a database name in the connection string i.e. 'BOE-201402'.
However I need to be able to allow the user to run the report using different databases.
I can get a list of the databases as a parameter by setting a dataset using the following
SELECT `SCHEMA_NAME` FROM `information_schema`.`SCHEMATA` WHERE `SCHEMA_NAME` LIKE 'BOE-%' ORDER BY `SCHEMA_NAME` DESC;
i.e.
BOE-201402
BOE-201401
I have set a parameter called @BOE_DATABASE from the drop down list provided above.
What I need to do is before rendering the report is to be able to point the datasource to the database stored in @BOE_DATABASE so that the results that are in the report come from the chosen database.
I am sure that there is a way to do this as I have done this using ACTUATE BIRT reporting tool which we want to replace urgently with Microsoft SQL
I would sincerely like to thank any quick response on this matter

Hi Leslie,
Thank you for your post.
Please refer to the thread your post above.
http://social.technet.microsoft.com/Forums/en-US/f02b7caf-5f01-41d9-810f-fbce659e5aec/report-designer-odbc-connection-string-for-data-source-using-a-parameter?forum=sqlreportingservices
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Cyrstal Report Server Version Compatible With What Crystal Reports 2008 Ver

I am currently running Crystal Report Server Version 12.1.0.882 . I am having issues getting my reports to run on the reporting server. I need to install Crystal Reports on the same machine so that I can test the connection to the database that we are reporting on. The Crystal Report 2008 version I have is 12.2.0.290 but it is incompatible with the current Server version so they can not both run on the same machine.
What version of the Crystal Reporting Server matches up with the latest version of Crystal Report 2008 12.2.0.290?

If you want to run Crystal Reports created with Crystal Reports 2008 designer (I believe you are using SP2) you need to have Crystal Reports Server 2008.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken
http://twitter.com/mfoeken

Build html page with database images

Hello,
I have to build html pages in jsp that display images (JPEG, GIF) who are stored in database BLOB fields.
Is anybody have sample to do this ?
Thanks

> Please help me... I need it!
The answer that you do not want to hear is - spend some time
learning HTML
and CSS if you want to do things like this. It's true. DW
will expect this
knowledge on your part. Without it you will encounter
continuous mysteries
in your pages.
> I have designed my page in Photoshop and have saved it
as a HTML with
> images.
This is the wrong way to start. Here's a better plan....
http://apptools.com/examples/pagelayout101.php
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Noreago1979" <[email protected]> wrote in
message
news:g1vhsa$lg6$[email protected]..
> Is there a way to anchor a layer to a specific point on
a HTML page?
>
> I have designed my page in Photoshop and have saved it
as a HTML with
> images.
> I then opened it in Dreamweaver and alligned my designed
page centre so
> that it
> is always center to the opened explorer window. The
problem I am having is
> that
> I want to place my text layers in the document and have
them anchor or
> stay to
> the exact spot i placed them on the page i designed and
now have opened in
> Dreamweaver. When i test it or open it up in the
explorer page the text
> layer
> shifts differently than the the designed page i created
in photoshop. I
> would
> like them to move together at the same rate.
>
> How can I make this work.... I have tried everything
that i could think
> of.
>
> Please help me... I need it!
>
> Thanks
>

Crystal Report 2008 is compatible with Crystal Report 9?

I'm using VB6 and VS 2003 for application development and using Crystal Report 9 for reporting. Thanks.

I understand that the question is;
Can I run reports created in CR 2008 with CR 9?
Answer is yes - as long as - you do not use any new features of CR 2008;
cascading params, dynamic params, flash, etc.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Report Builder 6i compatible with database 9i?

Similar Messages

Maybe you are looking for