Report builder on windows 7 64 bit on 11G

Hello,
I have 11g on my laptop running windows 7 64 bit.
I need to be familiar with the report builder real quick.
I cannot find the software to download for report builder for 11g for windows 64 bit.
Can anybody help........

Forms 11.1.2.1 is the right version to use. Have you followed installation steps similar to the below? If you don't install WebLogic, Forms/Reports won't work.
Steps to install:
1.) Install Supported JDK: 1.6.0_35+ or 1.7.0_07+
2.) Install WebLogic 10.3.6
3.) Install Forms/Reports Home
4.) Configure Forms/Reports builders and weblogic domain
5.) Open reports builder.
Thanks,
Gavin
Edited by: GavinWoods on May 16, 2013 10:53 AM

Similar Messages

Error when open Oracle Report Builder 10g (Windows 7 Ultimate 32-bit)

Hi all,
I installed Oracle Developer 10g on windows 7 ultimate 32bit.
Form builder running well, but the report got problem when i opened.
This is the error message:
Problem signature:
Problem Event Name: APPCRASH
Application Name: rwbuilder.exe
Application Version: 10.1.2.0
Application Timestamp: 42ea43b7
Fault Module Name: ROS.dll
Fault Module Version: 10.1.2.0
Fault Module Timestamp: 42c3b2b7
Exception Code: c0000005
Exception Offset: 0000afaa
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Can anyone help?
Regards,
eRie

Hello,
For installing Developer suite 10gR2 on windows 7 there are some special installation steps.
Please make sure that i hava followed them as described in the metalink note:
Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) (Doc ID 1292919.1)
Also be aware of the following issue:
Cannot Open Forms/Reports Within Forms/Reports Builder 10gR2(10.1.2.3) on Windows 7 (Doc ID 1306651.1)
Regards,
Alex

Reports builder on Windows 7 (64bit)

Hello,
I hope someone can help me with this....... I have installed Oracle Forms an Reports (64) on Windows 7 (64bit) successfully, but when i try to start report builder it does not open and no error apeared. I try to run it in cmd and i get the following message : The Reports Builder is only supported on the Linux x86 and Windows x86 operating systems... So is it true that I can't run reports on 64bit Windows or am I doing somethin wrong? What can I do? Can I install Forms/Reports (x86) on my version of Windows and will it work?
If someone has any idea please hepl me,
thank you!!

Today I installed FMW 11.1.1.3 and got the same error message when calling rwbuilder.bat. I had to remove the line "goto end" in the batch file to get Reports Builder running. I havn't tested the stability so far but at least I can run the builder. It is (as expected) the 32-bit software. If there are problems I would try to run it in compatibility mode.
Regards Juergen

REPORT BUILDER ON WINDOWS 98

HI I HAVE ORACLE 8i AND DEVELOPER 6i. iS THERE A WAY TO GET REPORT BUILDER IN DEVELOPER. FORM BUILDER AND EVERYTHING ELSE IS WORKING PERFECTLY I JUST DONT KNOW WHERE TO GET REPORT BUILDER DOWNLOAD FROM. PLZ HELP

Just go to the download page of OTN and download the Developer. Everything that you need is in there. You may check your current CD now, they are usually bundled together.
null

How to install oracle report builder in windows 7

Hi Team,
Could you guide me to install oracle report 11g in my PC . Previously i was using 10g .
OS : win 7
DATABASE : 11g

Follow How to install forms builder? | Oracle Community
Hope read all and give a try.
Hamid

CF8 Report Builder duplicates subreport parameters

I am experiencing this problem running Report Builder under
Windows XP:
1. Create a report.
2. Create a subreport that has input parameters.
3. Add the subreport to the primary report and define
subreport parameters.
4. Save and close both files.
5. Reopen the primary report file.
6. Look at the list of subreport parameters for the linked
subreport
I routinely find that in this scenario, any subreport
parameter that I originally defined has been duplicated, such that
if I started with:
varOne - #query.foo#
varTwo - #query.bar#
Upon reopening the primary report and insepcting the
subreport paramaters list I will see:
varOne - #query.foo#
varTwo - #query.bar#
varOne - #query.foo#
varTwo - #query.bar#
Which causes errors when I attempt to run the report.
What's the patch schedule for report builder?

This problem appears to be fixed in build 181436 of the
Report Builder

Inserting a two page TIFF file into Report Builder 10.1.2.2.0

Hello all!
I am trying to create a report which uses a pre-printed form. I went to the paper layout view and inserted my TIFF file, however only the first page is used. This is a two page file. How can I use both pages in my report?
Thanks!

Can you open any other rdf?
We had quite a few crashes with the Report Builder on Windows 7, especially when using graphs in rdfs. Setting the compatibility of the shortcut to "Windows Vista" solved most of our problems.
Regards
Markus

Report Builder 10.1.2.0.2 Crashes on opening a rdf file

Hi,
I am trying to do a customization on an oracle standard report (sales order acknoledgement),when i try to open the rdf file from the Reports builder it crashes immedietly. Also i noticed the builder is crashing if i open rdf file having size more than 1MB. I am able to open rdf and make changes in it if its lesser than 1 MB. Not sure if there is any configuration that restricts the size of the rdf file. Please help.
Thanks
Prathap

Can you open any other rdf?
We had quite a few crashes with the Report Builder on Windows 7, especially when using graphs in rdfs. Setting the compatibility of the shortcut to "Windows Vista" solved most of our problems.
Regards
Markus

Oracle Fussion Report Builder Not properly Work in 64 bit windows?

Windows 7 64 bit Oracle Report Builder 11.1.1.3 not properly work
Windows 2008 server 64 bit Oracle Report Builder 11.1.1.3 not properly work
Data model Design Open (APPCRASH) vgs.dll
copy paste not properly work
windows donot send message many times
very very slow working in design time
goto end (delete in both operating system)
but ii think report builder work only 32 bit windows????
any body can help me what can i do for 64bit windows

Reports Builder 11g doesn't work on 64-bit OS-system (linux also). You can only use an VM-maschine with 32-bit OS or wait until oracle fineshed the Builder for 64-bit.

Windows file association for RDF file type to open in Reports Builder 11g

Does anyone know how to create a Windows file assocaition to open a reports RDF binary file in Reports Builder 11g? We're running FMW 11.1.2 64bit on Windows 7 64 bit.
Thanks

Hi InoL
Thanks for your reply.
Would this work with Reports 11g? rwbuilder.exe seems to require being called via rwbuilder.bat in 11g.
Kind Regards
Neil

Report Builder 11g on Windows 7(64bit)?

Hi Oracle Guys
I know that Report Builder 11g is not certified on Windows 7 (64Bit)
Knows someone if release 2 it is planned ?
Or knows someone for when the releases 2 or a patch is planned?
We want to install next year new Developer-Clients and we want to know if Windows 7 64bit is an “no go”
thx
Alfred
Edited by: alinzenb on 16.08.2010 15:47

I use the 11g Reports Builder on 64bit Windows 7.
It works fine except that it doesn't like the Aero interface. Windows automatically switches to basic mode when you're running the builder.
If you're ok with that then you shouldn't have any problems.
Cheers,
Toby.

Hw to install oracle forms and reports 11g builder on windows machine

HI Guys
i need to install oracle forms and reports 11G builder on windows machine for devlopers.. do anybody know from where i can download them and install them on developers machine. if anybody know steps of them .. that will be great..
Regards,
Devender

Maybe this thread will help you: Re: Install Forms & Rpts 11.1.1.3 with WebLogic Server 10.3.3 on Win32

Oracle 11g, 64 bit, Forms 11g 64 bit on Windows 7 Professional 64-bit

We just changed over to Windows 7 64 Bit now we trying to find out what version of Fusion Middleware will run on Windows 7 64 bit. Most posting say you can't install
Oracle 11g 64 bit on Windows 7 64 bit OS, but we have found a few that say they have found away to install 11g 64 bit. Not one of them shows you the install
from start to finish and some of the posting go back to 2009!
If this has been a problem from 2009 - present can some tell why Oracle has not provided a fix or update for Windows 7 64 bit and are they going to in the future?
If anyone knows how install Oracle 11g 64 bit, Forms 11g 64 bit on Windows 7 Professional 64-bit please let me know!
Thanks!
Monty

Monty,
I assume that you mean the developer tools? They are kind of in limbo with 64-bit support for the dev tools, but if you want to get the latest (as of today) release working, you can do this:
1). Install a 64-bit JDK
2). Install WLS 10.3.4 generic (use the 64-bit java)
3). Install Forms/Reports 11.1.1.2 (install only, don't configure)
4). Install Forms/Reports 11.1.1.4 (install only, don't configure)
5). Edit your PATH system variable so that it doesn't contain any parenthesis. I did this by creating a junction point for c:\program files (x86) and using the junction point in the path
6). Run the configuration utility to create the forms/reports domain. Be sure to specify the dev tools
7). Look in the start menu for the Reports Builder icon. It will be pointing to a batch file. Edit that batch file to comment out the lines that print a message and exit (because you're on 64-bit)
Not officially supported, but it works for me.
John

11g Report builder hanging

Hi,
I have problems with getting 11g reports builder to run from my machine. Every time i start my report builder the rwbuilder.exe is recorded as running from the task manager
but the application will just hang afterwards. Any solutions available for that? Please help.
Cheers,
user11336462

Hi,
I have one question where can i download reports builder 11g for windows xp os.
Thanks in advance.

32 bit Flash Builder on Windows 7

How does one install 32 bit Flash Builder on Windows 7 ? It install 64 bit by default thorugh Creative Cloud.

Thank you for your reply.
The online assessment will not work. I suspect it relies on flash to run it. After I log in I proceed through a couple of screens which talk about the assessment. The screen supplies 2 buttons, 1 to start a practice session, another to do the actual assessment. I click the practice button whereupon a small popup window appears with a "please wait" message. This is quickly replaced by an errorpage.aspx which reports an error code. Following a link to an explanation of the error code it tells me this:
"This message is displayed when the connection to the assessment system cannot be established. A firewall or security software may be blocking the test from downloading or one of your browser software components is not up-to-date.
In order to overcome this problem, please ensure your version of Java and Adobe Flash Player is up-to-date. You can download the latest version for free using the below links:
Java: www.java.com/getjava/
Flash: http://get.adobe.com/flashplayer/"
In addition to this a link is displayed which helpfully attempts to verify environment setting. It opens another page which lists some current computer settings. Those checked as correct are given a green tick, those in error are given a red cross. Operating system and browser type are OK with green ticks, Flash plugin version and windows media player are marked with red crosses with links next to both to show how to fix them. The flash link takes me to another screen which displays this message:
"If you are using Internet Explorer (IE) please ensure that you use the 32-bit version. Flash is not compatible with the 64-bit version of IE."
Then it points to the adobe site to get the right download.
If my 64 bit flash also comes with 32 bit, how do I switch it on please ?
Thank you
Richard

Report builder on windows 7 64 bit on 11G

Similar Messages

Maybe you are looking for