Report Builder: output to Excel removes leading zeros
I'm trying to use the Report Builder to output a numeric
field to EXCEL , but on numbers that start with zero EXCEL removes
the leading zero's. ex. 00123 becomes 123.
Is there something that I can put in the expression builder
on the field to overcome this.
I've tried concatonating a single quote on the front of the
field but the single quote shows up on the output. I've tried this
on both the SQL and on the expression builder.
I've read on some of the posts where people have tried using
'mso-number-format:"\@'" within a TD tag but I can't seem to get
the syntax right inside the Expression Builder.
Has anybody got any suggestions?
Excel will remove leading zeros in a numeric field because it is treating the column as numeric. Putting a ' in front of the number forces Excel to treat the column as text.
Similar Messages
-
How to convert Report Builder output to .XLS
Dear All,
Let me please know how to convert the Report Builder output to Excel Format.
As there are having the facility to convert the output in .PDF or .HTML format but i want to convert that into Excel Sheet......
Please Guide me in this regards
Thanks in advance
Regards,
Vishal......What version of reports are you running?
If it's Reports 10g then have you looked at the help under the topic "About spreadsheet output"? -
How to convert the Report Builder output to .xls
Dear All,
Let me please know how to convert the Report Builder output to Excel Format.
As there are having the facility to convert the output in .PDF or .HTML format but i want to convert that into Excel Sheet......
Please Guide me in this regards
Thanks in advance
Regards,
Vishal......Hello,
If your question is about the format spreadsheet, it is not possible from Reports Builder :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/whatare/output/output_a_simpleexcel.htm
Restrictions
It is not possible to generate spreadsheet output directly from Reports Builder. Instead, on the command line, you can run the report using rwrun or Reports Server clients (rwservlet, rwclient, rwcgi), with DESFORMAT=SPREADSHEET. You cannot store DESFORMAT=SPREADSHEET as a system parameter value in the report definition (.rdf file).
Regards -
Remove leading zeros in report
Hi all,
I do a clasical reoporting. Data in the internal table numeric types. But when writing in the report, is appearing as 000056 etc. I want to remove this leading zeros in the report output. Any helps?
Regards,
Mic.Hi Michael,
u can use the function module for removing leading zeros
CONVERSION_EXIT_ALPHA_INPUT (adding zeros)
CONVERSION_EXIT_ALPHA_OUTPUT (removing zeros)
Regards
Nagesh -
Removing Leading zeros from query output.
Hello Experts,
Is it possible to remove leading zeros from the query output for a particular column?
I have a characteristics 'Reference Document' which has values like '000001386'. The users just need '1386' to be displayed and have asked us to remove the leading zeros.
Is there something that can be done for this at a query level? I can't modify the underlying InfoProvider because this requirement is just for one set of users, the other users need the document nmber in the original format.
Thanks
ArvindHi,
you can use ALPHA conversion option in the definition of that particular characteristic.
Try this code in a routine.,in query designer;
data a(9) value '000001386'.
SHIFT a LEFT DELETING LEADING '0'.
write:/ a.
Output will be : 1386
Or use this method also
data a(9) value '000001386'.
Call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
Exporting
input = a
Importing
output = a.
write a.
output:
1386
Regards
CSM Reddy -
Conversion routine to remove leading zeros from nonnumeric values.
Hi,
Can anybody tell me any conversion routine while can remove leading zeros from a character value.
Eg :
input : asdfe
output : 0000asdfe and vice versa
I tried with Alpha conversion routine but that is useful only with numeric values.
Please help.
Regards,
Deepti Jain.Hi,
See the following program, and the same logic you can apply in Transfer Rules/Transformations. Take ABAPer help.
REPORT ZALPHA_INPUT.
DATA: ZI(18) TYPE C,
ZO(12) TYPE C.
DATA: ZS(12) TYPE C,
ZR(18) TYPE C.
ZI = '000000099999889925'.
ZS = '099999889925'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = ZI
IMPORTING
OUTPUT = ZO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = ZS
IMPORTING
OUTPUT = ZR .
Write:/ ZI.
Write:/ ZO.
Write:/ ZS.
Write:/ ZR.
Thanks
Reddy -
Removing Leading Zeroes in Location value
HI Gurus,
I am having some trouble in releasing demand plan to SNP. On the demand planning side, we are using standard characteristic 9ALOCATION for storing location values. When I release demand plan (using Location characteristic - 9ALOCATION) to SNP, I get a message saying 'Location 00000000000000003000 does not exist'. But, I have location '3000' assigned to the active model in APO system.
I believe this issue is arising because, the system is storing leading zeroes in Location value '3000' on Demand Planning side. I know that there is customization setting (SPRO-> APO -> Master data -> Product -> specify output format) to prevent leading zeroes from being added to product number. But I don't see a similar setting for Location and moreover I am using 9ALOCATION and not 9ALOCNO.
So, how can I remove leading zeroes in the values of 9ALOCATION.
Any help/comments are appreciated.
Thanks,
Shiv.I found a solution to this problem. Unlike 9ALOCNO, Characteristic '9ALOCATION' has Alpha conversion routine. So this conversion routine fills up the leading zeros. I removed Alpha conversion routine from the 9ALOCATION in RSA1 and it works fine now.
-
Hi Gurus,
I have a alpha routine in update rule which will add leading zeros in omaterial,but now I want to display 0material in the report without leading zeros. How to do this ?
Thanks
LizaEasiest thing is remove the conversion routine in 0material, if you dont want leading zeros.
Or
In update rules, use truncate statement to remove leading zeros.
Ravi Thothadri -
How to remove leading zero from Material Number
Hello Everyone,
I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
Is there any setting in query desinger to handle this issure or in the backend.
Need your inputs.
Thanks,
Lasya.Hi
you can use the function Module
CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
to test this go to SE37 --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
>display -
> F8
in the input give 000000456
and execute
the out put will be 456
for getting Zeros you can use
CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
Santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM -
How to remove leading zeros from variable
hi,
how to remove leading zeros from variable like it_vbap-matnr.
value in it_vbap-matnr is 000000000000000358
i want to remove leading zeros so that it become 358
regards
deepakYou can use Function Module <b>'CONVERSION_EXIT_MATN1_OUTPUT'</b>
This Function Module will eliminate leading Zeros.
For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
I think u will not get leading Zeros into utr Internal table when u read from VBAP.
Bcoz MATNR in VBAP itself have Conversion routine.
If u r getting leading zeros,U can use following Logic.
tables:
vbap.
data:
t_vbap like standard table of vbap.
select matnr
from vbap
into corresponding fields of table t_vbap.
loop at t_vbap into vbap.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
EXPORTING
INPUT = vbap-matnr
IMPORTING
OUTPUT = vbap-matnr
modify t_vbap from vbap transporting matnr.
endloop.
Hope this will work..... -
Removing leading zeros from a string value
Hi All,
i have a Requirement like , i need remove leading zeros from a string value,
like , 00Raj00Shekar==>Raj00shekar,
how can i do this ?
if it is only with the custom functions ,where can add the fuction in Jdeveloper and SOA Middle ware?
Thanks in Advance,
RajHi Raj,
you can use below function to get the desired output in xsl.
<xsl:value-of select='translate(oraext:left-trim(translate(<inpString>,"0"," "))," ","0")'/>
HTH,
Regards,
Vikas Manchanda -
Remove leading Zeros from the mapped context node(Table)
HI,
I have he following requirement:
In the Leave approval application , in the Approver worklist we have the coloumn to display the resuqester's Perner.
The perner starts with leading zeros. We have to remove these leading zeros.
I have refer the following threads:
Removing leading zeros in a column
How to remove leading zeroes of string
and wiki document:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/remove%252bleading%252band%252btrailing%252bzeros%252bfrom%252ba%252bstring
but I am not able to create the calculated attribute in the Mapped Node( NWDS is not allowing indicating it is not allowed for mapped nodes.)
Any pointer how I can remove leading Zeros from existing column?
If I create the calculated attribute outside the mapped node then it is taking only the first value of the mapped node.
Please note we do not want to modify the RFC.
_vishalHi,
Thanks for inputs,
Now I created a test application where the original structure is as follows in the View Controller:
1) Context -> Z_Portal_Test_Input (mapped Node/folder) -> IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
note: this attribute Eid has the values (01, 02,03,04,05)
2)Context -> Z_Portal_Test_Input (mapped Node/folder) -> Output(mapped Node/folder) ->IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
Now as per your suggestion I created another node like this
Context -> Z_Portal_Test_Input (mapped Node/folder) ->testnode(value node) ->testValue(value attribute)
testnode cardinality is 1..1 and singlton = false
In the Layout
The tablecell editor of one coloumn is mapped to text Z_Portal_Test_Input.testnode.testvalue
It is expected that this will show the values like(1,2,3,4,5) but it is showing value(1,1,1,1,1)
The code of get method is:
public java.lang.String getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement element)
//@@begin getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement)
String msg =wdContext.nodeZ_Portal_Test_Input().nodeOutput().nodeIt_Itab().currentIt_ItabElement().getEid();
return removeLeadingZeroes(msg);
//@@end
the functon removeLeadingZeroes(msg) is implemented as per the wiki link.
What wrong I am doing/ missing....
_vishal -
Remove Leading zeros from column
How can I remove leading zeros from a column?
The data looks like *00-04-071*
The output should display 4071user10876532 wrote:
How can I remove leading zeros from a column?
The data looks like *00-04-071*
The output should display 4071try
select to_number(replace('00-04-071','-','')) from dual -
Remove leading zeros coming from Active Directory
Greetings all. Our sapusername is stored in Active Directory with leading zeros. Is there a way to remove these zeros in the portal so SSO will work? I have had my AD team manually remove the zeros in front of my sapusername, so I'm sure that's the issue.
Alternately, is there a setting in R3 that would allow leading zeros?Hi,
I've seen the problem before and I think you only have two choices (haven't looked into if R3 can accept leading zeros)
1. Since you are allready retrieving sapusernames from an R3 change that mapping to remove leading zeros and possibly put it in a new attribute.
2. Create a JAAS login module which retrieves found username from the HeaderVariableLoginModule and trims leading zeros before putting the username back to shared state. This new LoginModule must be placed before the CreateTicketLoginModule.
Note it is not very trivial to create a JAAS login module but an excellent guide can be found here http://help.sap.com/saphelp_nw2004s/helpdata/en/46/3ce9402f3f8031e10000000a1550b0/frameset.htm -
Remove leading zeros using MDX function
Hello,
BO XI R3.1 SP2 FP2.5, SAP BW 7.0
This seems simple, but I cannot find a solution.
How do I remove leading zeros from a character field in a OLAP universe. Is there any MDX function?
I tried
<EXPRESSION>
Value([0MATERIAL].[LEVEL01].[[20MATERIAL]].[Value])
</EXPRESSION>
<EXPRESSION>
StrToValue([0MATERIAL].[LEVEL01].[[20MATERIAL]].[Value])
</EXPRESSION>
I can remove the leading zeros in Webi, but we require it for ad-hoc reporting? Is there a way to do this in the universe?
Thanks,
NikhilHi,
SAP BW MDX only allows calcuated expressions that return numeric values: this is one if the main SAP MDX limitations.
By the way there is the abilitiy to return string only for those expressions:
[Dimension].currentmember.name
[Dimension].currentmember.uniquename
So you can do this:
<EXPRESSION>
(right([0MATERIAL].currentmember.name, 4))
</EXPRESSION>
<EXPRESSION>
(right([0MATERIAL].currentmember.uniquename, 4))
</EXPRESSION>
<EXPRESSION>
(left([0MATERIAL].currentmember.name, 3))
</EXPRESSION>
<EXPRESSION>
(left([0MATERIAL].currentmember.uniquename, 3))
</EXPRESSION>
Otherwise you can use WebI formulas as described in the thread.
Regards
Didier
Maybe you are looking for
-
I prevsiouly owned an Ipad. Before selling it, I backup it on my Macbook. When the new Mavericks has been released, i upgraded my Mac. Now that I have iBooks on my Mac, I want to restore my iBook collection from my previous Ipad to my Mac. On my Mac,
-
My videos are not rendering properly
my videos icon does not look the same and it wont play . but it shows its saved as a mp4
-
Selection conditions in Infopackage
Hi, I developed a data source in R/3 used to load Text Data. I selected the Key field,Key text and language fields from the table and i checked them in the extract structure of data source. Now when i replicated the data source and created info pac
-
TS4268 Imessage and Facetime ID
i have a new ipad mini. when trying to sign in using my apple ID for imessage and FaceTime. it shows that apple id or password is incorrect. help please
-
I wrote a document using "pages" program when I email people can not open it, help?
I wrote a document with "pages" program, but when I attache the document to email and send it people are unable to open it, help anybody?