Report Builder - Printing in dos mode

I am using developer 2000 - report builder
I want to printing all my near around 15000 -in dos mode
because in windows printing it is very slow .
so just want to print it in dos mode .

Hi,
are you find any solution for you problem(slown printing in windows), if found pls send me the solution.
Srinivas

Similar Messages

Print in dos mode using air

is it possible to print in dos mode without print dialogue box using abobe air...
can anybody suggest a way,,,
thankss

I don't have that printer - you'll have to look through the menus to see where to enable it.
If you can't find it, do one of these two things:
Go to Print & Scan prefs, highlight the printer, and click on Options and Supplies, then select Options. Is the option available there?
or
1) Use a browser and go to localhost:631 (this is your internal CUPS print system admin web page - on your Mac)
2) Go to the Printers tab
3) double-click the Epson, which will take you to the detailed admin menus for the printer
4) choose Set Default Options under the Administration menu.
5) Look for the draft/economy option and enable it.
6) Don't forget to apply changes by clicking on Set Default Options at the bottom of the page (may have to scroll down)
and
just to confirm - in Print & scan prefs > highlight the printer > Options & Supplies, it shows driver version 9.04?

Report Builder printing problem...

HI all
I created a report in Report Builder 6i
When I print, it doesn't show printing dialog box for me to select printer or pages for printing
And it prints all pages automatically. What may be reason?
Thanks ...

Set PRINTJOB= YES
e.g.
ADD_PARAMETER(ID_PL, 'PRINTJOB', TEXT_PARAMETER, 'YES');

How can i modify my report to print in duplex mode ?

Hello, I have a report to print orders (i use vb6 and CR XI-R2 at runtime with CrystalActiveXReportViewer object) but now i must print the payment conditions on the back of each order. What is the way to modify my report to do that.
(Is there somewhere examples of duplex printing report?).
Thanks in advance.

Hi Ludek,
I have imported the reg key but i have the same problem: you must install SP2 or SP4 before.
Here is my reg key :
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{94FB0978-D094-40C7-91D7-834D39220D4A}]
"AuthorizedCDFPrefix"=""
"Comments"=""
"Contact"=""
"DisplayVersion"="11.5.8.82627"
"HelpLink"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,\
70,00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,\
00,6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,\
00,00
"HelpTelephone"=""
"InstallDate"="20080416"
"InstallLocation"=""
"InstallSource"="C:
CRXIR2SP2Full
win32
"ModifyPath"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,78,\
00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,00,\
38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,39,\
00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,00,\
30,00,44,00,34,00,41,00,7d,00,00,00
"Publisher"="Business Objects"
"Readme"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,70,\
00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,00,\
6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,00,\
00
"Size"=""
"EstimatedSize"=dword:001bcc81
"UninstallString"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,\
78,00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,\
00,38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,\
39,00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,\
00,30,00,44,00,34,00,41,00,7d,00,00,00
"URLInfoAbout"=""
"URLUpdateInfo"=""
"VersionMajor"=dword:0000000b
"VersionMinor"=dword:00000005
"WindowsInstaller"=dword:00000001
"Version"=dword:0b050008
"Language"=dword:00000000
"DisplayName"="Crystal Reports XI Release 2"
Hope this helps you.
Just a precision : the message 'can't load data' not occures on all PC with runtime, At work i have installed runtime on 3 PC's (XP) and it works, problem occures when i 'm connecting to my customer's server (windows 2003 server SP2) via tse.

Report not printing in preview mode

i have a report that has real strange behavior. we are using the forms server to produce this report in preview mode. this report will produce the desired results for some of the reports. but on other reports this pulls up a blank pdf document. on the webserver the pdf is produced properly in cache. the pdf can be opened on the server and viewed fine. does anyone have any ideas of why this is occuring.
thanks

hello,
which webserver are you using? did you try to copy the file to your client and display it locally, just to see, if the client-side-acrobat is working fine ?
regards,
The Oracle Reports Team

Report printing in character mode in rb6.0.5.28.0

hi all,
i am facing a problem to print reports, devepoped in character mode.
i am using report builder 6.0.5.28.0
and operating system windows 98 on client.
The situation is
A) 1st case: when i run a report (.rep file) with destination type
screen or preview. then i want to print it on printer, but as soon
as i select the printer and click ok button it gives the
operating system's message of "this function has performed an illegal
operation" and the application exits.
B) 2nd case: when i run a report (.rep file) with destination type
screen or preview. then i want to generate an text file .txt,
but when i generate to txt it doesn't generate the file as in screen
i.e. format is changed.
C) 3rd case: the interesting situation is that when i run
a report (.rep file) with destination type printer and
select the printer and click ok it prints quite fine.
D) 4rth case:similarly if i select the destination type as file the it
generates to file quite fine.
please help me in this regrard.
suggest either i need any patch etc.
i haven't install any patch
prompt response would be highly appreciated.
dilshad ch.
null

hello,
i would strongly suggest you
1) install the latest patches
2) check back with oracle support services if your problems persist. check oracle metalink for known problems.
regards,
the oracle reports team --pw

Report Builder 3.0 launch issue in SharePoint Integration mode

Hello,
I'm facing issue when opening the report builder 3.0 tool. Report server is configured in SharePoint Integration mode. I already have the FQDN configured for report server and in SharePoint (AAM) but still it fails when the end user is trying to access
the report builder 3.0.
Just to brief on the instance setup;
SQL box setup
1. Windows Server 2012 R2 Standard/Enterprise edition with latest service packs and updates
2. SQL Server 2008 R2 Enterprise edition with all features except Reporting Services installed and configured
3. SQL Engine and Agent are configured in service account (domain account)
Web box Setup
1. Windows Server 2008 R2 Standard/Enterprise edition with latest service packs and updates
2. IIS enabled with all the features
3. SharePoint Foundation 2010 with SP2 installed in advanced mode and the database server is mentioned as above
4. Farm is configured with domain account (farm account)
5. Default site is configured with domain account (site account)
6. Authentication used for default site is NT domain accounts
7. AAM is setup for default site to use the FQDN (server.domain.com)
8. SQL reporting services is installed (only) with service account (same account used which is configured in the SQL engine and agent in database server)
9. Reporting Services add-in for SharePoint Foundation 2010 is installed
10. Reporting Services is configured to use the FQDN, email settings is configured
11. SharePoint Foundation 2010 is configured to use the Reporting Services (General Application Settings) by granting the access to database, integration the report server URL with windows authentication (used the SQL reporting services service account)
12. Report Web services when clicked, open the Reporting Services window properly where it shows the SharePoint default site URL and on click shows the proper folders configured for use for reporting services
13. Report Builder launch URL is specified as /_vti_bin/ReportBuilder/ReportBuilder_3_0_0).application
14. IIS restart done, SQL Reporting Services restart done, even web server reboot done
15. When supplied the URL in browser as
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder_3_0_0).application it start the clickonce window but after this immediately throws the error message as below.
16. Also, I tried to open the Report Builder 1.0
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application it fails with same error message.
17. After debugging several times, I am unable to resolve the issue.
18. I tried re-installing the Reporting Services (first uninstalled, then reboot, then folder cleanup, then install Reporting Services) but no hopes and the issues remains same as "The remote server returned an error: (500) Internal Server Error."
19. Also, I tried with the fresh machine, wiped out the VM, installed OS, IIS, SharePoint Foundation 2010, SQL Reporting Services, etc. again no luck, the issue remains same as "The remote server returned an error: (500) Internal Server Error."
Error message when launching the Report Builder tool
PLATFORM VERSION INFO
Windows    : 6.1.7601.65536 (Win32NT)
Common Language Runtime : 4.0.30319.18444
System.Deployment.dll   : 4.0.30319.18408 built by: FX451RTMGREL
clr.dll    : 4.0.30319.18444 built by: FX451RTMGDR
dfdll.dll    : 4.0.30319.18408 built by: FX451RTMGREL
dfshim.dll    : 4.0.41209.0 (Main.041209-0000)
SOURCES
Deployment url   :
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX%20Report%20Models/XX%20Report%20Models/XXX%20XXX%20Report%20Model.smdl
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl resulted in exception. Following failure messages were detected:
  + Downloading
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl did not succeed.
  + The remote server returned an error: (500) Internal Server Error.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [9/19/2014 4:42:13 PM] : Activation of
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl has started.
ERROR DETAILS
Following errors were detected during this operation.
* [9/19/2014 4:42:16 PM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
  - Downloading
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl did not succeed.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
   at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
   at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
   at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
   at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions
options, ServerInformation& serverInformation)
   at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions
options)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
  --- Inner Exception ---
  System.Net.WebException
  - The remote server returned an error: (500) Internal Server Error.
  - Source: System
  - Stack trace:
   at System.Net.HttpWebRequest.GetResponse()
   at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
Thanks & Regards,
Mahesh Dhinge

I have resolved this issue as it was mainly due to the integration of reporting services to SharePoint Foundation.
Thanks,
Mahesh
Thanks Mahesh Dhinge

Report Builder Question: Printing PO's from E-Business Suite - POXPRPOL

I'm hoping there's someone who has the time to help me: We are using Report Builder 9, Oracle 9i, and E-Business Suite 11.5.10.
I am a new developer using Oracle, and need to make some changes to the seeded (default) POXPRPOL (Purchase Order Print - Landscape) report, using Report Builder.
I have two problems:
1. When I print PO Releases from E-Business Suite, and specify I want releases 1 through 2, I get those fine, but the first page is my "Purchase Agreement". The question is: Is there any way (programatically or otherwise) to say "When the "Release" fields are filled out, don't include the Purchase Agreement?
2. Somehow, after making a few changes to the POXPRPOL report, my quantity has disappeared. Is there any suggestions on how this could happen? I look at the query where they are using "POL.QUANTITY_TO_PRINT" for the working and the non-working reports, and they look identical.
I'm hoping DESPERATELY that someone can help me - I'm really in a bind...
Thanks!
Steve

Srini,
Thanks so much for your reply!!!
1. Ok, but how do I hide a whole page? I noticed the conditional formatting, but I want to "not print" a whole page when this page is a "Purchase Agreement".
2. I've checked the source - it's coming from POL.QUANTITY_TO_PRINT - POL is a view that is unpopulated. I assume it's populated at run-time. So now I am trying to track down where it's populated, but can't find that in report builder. The quantity is being taken into account, because I put a total at the bottom of the page, and that number matches price * pol.quantity_to_print. Very strange...
Finally, here's another question, if you don't mind:
3. When I print a purchase order that is set up as a blanket, as I mentioned before, I get my "Purchase Agreement" first, and then one (or more) pages per release. But the "Page Number" on each is "1" because each is a one-page PO. But my "total pages" is "3", so each page reads "Page 1 of 3". Any idea if there's a way around that?
Thanks again! Hoping you have some more insight! :)
Cheers!
Steve

Report builder not printing

HI all,
we were using Oracle Report 6i on windows XP Service pack 2, Oracle Database 10.1.0.2.0 On AIX 5.2 and SEDCO Magina L2200c printer was being used to print the reports from report Builder 6i and it was working fine. but now just we change the our user PC instead of service pack2 we are using service pack 3 and insatllesd oracle report builder 6i on it .but its not printing properly (it skip some character). i check the NLS_LANG=ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256 ,it is same as previous, we using arabic language. if any body has idea please do suggest me what should be taken. i am waiting for your response.
BEST REGARDS
------------------

Report 6i That is not very specific. Are you on the latest patch (patch set 17 I believe)?
It could also be a problem with the printer. Check for driver updates for this specific printer.

Why is printing report different from report builder and app server

I created a report and when ran from report builder it looks fine.
And when i moved the report to server and ran the report in the browser using this url
http://192.1.1.8:7778/reports/rwservlet?userid=esp/esp_dev1@wdev&report=FMMA_VOUCHER.rdf&destype=cache&desformat=pdf
and print it the report shrinks, the fonts become small and the margins change. I am having hard time how to figure out a way to correlate the formatting in the report builder and when i run on the server using pdf format.
Is there any way to set the server so that the pdf output matches with the report builder.
Thanks.
Sree

I assume you are doing a cross platform deployment
Pls read section 6.2
Resolving PDF Font Issues During Cross-Platform Deployment
in
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Problem printing a report in Report Builder 6

Hi people, I'm experiencing tremendous difficulty when attempting to print a report in Report Builder 6. I've NEVER had this problem before, and it is a bone of contention to our client. Whenever I try to print a report from the report previewer, I get the following error:
"REP-1849: Failed while printing."
This error occurs irrespective of the query's complexity!
Even if I write a simple query such as, "SELECT 'johann' FROM dual", I get the above error. PLEASE help! Failure to test my report (and implement it) is causing a loss of approximately R570,000.00 to the company.
Your feedback will be appreciated; feel free to e-mail your suggestions to me at:
[email protected]
Thanks!

The latest patch(patch 11) addresses this issue.
Thanks.

Print in character mode with Reports 6i

No matter what I do, when I try to print a report made in character mode the .prt file is not applied, I changed de initial value of desformat to de desired printer configuration, but nothing, I even change de dflt.prt, and made de width larger but it still prints with de default configuration.
If anyone can help me.
Thx.
David.

hi dear,
actually i faced this problem b4. ok let me give u full procedure that I apply to make my reports be printed in .txt file as i want it.
humm...first of all if u are creating reports using report wizard plz make sure u select Template = "Character Mode"
and if not using report wizard as I don't use he he he..then
ok ...let go...
1. open property palette for report module
- set unit of measurement = Centimeter (it's not that imp but i do)
- now go at last section in that prop. pale. and set "Design In Character Units" = "Yes"
2. in Data Model goto system parameters
- Desformat = "dflt" (it's default)
- desname = "d:\h1.txt" (or whtever u like it;'s use full while development)
- destype = "File" (so u will get your report directly into the file specified at desname)
- mode = "Character" (obviously..he he he)
ok now step 3
3. layout model
-> main Section
- humm now let say u want your report to be 150 char in width
so just see there u will find width = 21.59 and in char mode (down in that prop.
pale.) report width = 80
so it's very simple maths 150 char => 40.48125 got it....
now that's all he he he
Enjoy your report with 150 char width...wht else... ok ok ok let me give u a copy of my dflt.prt (as it's also having it's impact on this...issue :)
DFLT.PRT
========
printer "dflt"
height 68
width 208
linefeed control(J)
===============
ok and yeah try to see the output file into word pad or some like...dont' try it using notepad as i am not sure how will it look (:-o)
bcoz I am actually creating this reports to be transferd to solaris so i removed line return (i.e. control(M)) .u can keep it ok...
so....if any prob just contact...
Enjoy Oracle...

Print information from a row - Report Builder 3.0 - printer button option?

Does Report Builder have any way of printing information from a row selection onto a page, rather than the whole report? I don't think it has a print button option when you create the report?

Hi KittyCat101,
According to your description, you want to select some particular rows when printing the report. Just as you said, there is no such feature in Reporting Services.
To work around this issue, we can create a parameter with the key field value in the report. Then we can print the particular rows based on the selection in the parameter. For more details, please see:
Create a multiple parameter named filter in the report.
Specify Available Values and Default Values from the dataset key field which is acted as filter when printing the report.
Add a filter as below in the tablix:
Expression: [Key field]
Operator: In
Value: [@filter]
When we render the report in report builder, it displays all data. While we can select the particular rows in the drop-down list when we want to print the report.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How Do I Print my reports Horizontally using Coldfusion Report Builder

Hi-
I want to print my reports Horizontally rather vertically using Coldfusion Report Builder. I am using a very simple query
SELECT
      Zones.Zone_id,
      Zones.Zone_name,
     Count(employees.cnic) as Employees
FROM Zones, Employees
WHERE Zones.zone_id=Employees.zone_id
GROUP BY Zones.zone_name
Or say Daily/Monthly Zone Sale with Zones in Rows and Dates/Months in Columns
Thanks
Tayyab Hussain

Have a look at my response to your post in the Report Builder sub-forum.

SQL Server 2012 Reporting services Report Builder ClickOnce in SharePoint integrated mode

Hi
I've installed SSRS 2012 in Integrated Mode with SharePoint 2013.
I've created RS Application, I have the Content types for Report Builder Report but when I try to create a new Report Builder Report from a document library (using ribbon) it try to lauch the following url
http://sp2013/bi/_layouts/15/ReportServer/RSAction.aspx?RSAction=ReportBuilder&FileUrl=http://sp2013/_layouts/15/ReportServer/rs.rsapplication&SaveLocation=http%3A%2F%2Fsp2013%2Fbi%2FDocuments&Source=http%3A%2F%2Fsp2013%2Fbi%2FDocuments%2FForms%2FAllItems%2Easpx
which gives an 404 Not found error
I've installed Report Builder 3.0 as standalone because from SQL installation I didn't get an Report Builder
What else should I do ?
I've noticed that ReportBuilder_3.....application is in webservices folder of sharepoint
Please help
Sorin Sandu

Hi Sorin,
SQL Server 2012 Reporting Services (SSRS) includes stand-alone and ClickOnce versions of Report Builder. The ClickOnce version can be used with Reporting Services installed in native or SharePoint integrated mode. For more information about how to start
Report Builder, please see:
http://msdn.microsoft.com/en-us/library/ms159221(v=sql.110).aspx
Reference:
SharePoint 2010 – SQL 2012 Reporting Services
SharePoint 2010 - SQL 2012 Reporting Services Part 2
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Report Builder - Printing in dos mode

Similar Messages

Maybe you are looking for