Report Builders Sections

In version 10.1.2.0.2 of Report Builder, is it possible to create a custom user defined section in addition to the standard header, trailer and main sections?

No, that's not possible. It's only possible to customize the given sections. What do want to achive?

Similar Messages

  • Blank space in the report detail section

    Hi ,
    I have data for ten columns and after that i am getting a blank space, so my report is scrolling to right side without any data.How shall i remove the blank space.Any suggestions.For one more i am getting this only at the second page (Detail section)
    Regards,
    Rajasekar

    Thanks James for the reply,but i am not getting it correctly.
    I have a year column which is the last column in my detail section.If i don't get any value for that year column then i am not getting these blank space at the right side of my report.If i have value for the year column then i am getting blank space double the times to my report detail section.
    Any suggestions
    Regards,
    Rajasekar

  • How to separate report layout sections in one report

    All,
    I'm trying to determine how to separate report layout sections in one report using Report Builder 10g. My requirement is to provide a user the ability to display a report in PDF, excel, RTF formats. How can I assign LayoutA to 'PDF' and 'RTF', LayoutB to 'Spreadsheet'?
    I've attempted to utilize the Header and Main sections in the paper layout, which contain unique layouts of the same report, but during generation, both sections are being displayed.
    Thanks
    Edited by: Jdavis on Apr 10, 2009 10:56 PM

    Hi there,
    How are you running the report? If you are selecting different types of output before calling the report then you could pass a parameter that is checked at runtime in the report and suppresses the layouts you do not want using format triggers.
    Mark

  • Report header section does not print all pages

    Hi,
    I have a custom report that consists of all 3 parts. it has a header section, main section, and a trailer section.
    I have a problem in a header section that it does not print all pages. It only gives the output of the first page and the last page for the header section.
    I open the .rdf file with oracle reports 6i .
    what do i need to check please?

    Please refer the following thread:
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-dev-l/report-header-section-does-not-print-all-pages-4166062

  • Setting Isolate Report/Page sections and Isolate Group sections using SDK

    Hi all,
    Has anyone exported the report to CSV format, by setting Isolate Report/Page sections and Isolate Group sections programmatically. If so, to which object should i set, and what are the methods to do
    this ? The CSV exported report contains lots of these sections, along with the actual data, so i am
    trying to suppress these other data in the exported file.
    I am using BOE SDK.
    cheers
    Nithy

    Hi Nithy,
    RAS SDKs may help you to achive your task.
    I would suggest you to see setGroupSectionsOption and setReportSectionsOption of CharacterSeparatedValuesExportFormatOptions class given in RAS APIs.
    Anu

  • Crystal Report Group section in new page

    Hi all,
    I have a program written in VB.Net 2005 which display a report. In this report, I have a group by Item type ascending.
    When I run the program and load the report, it display the data correctly.
    When I move my mouse cursor on Group Section Hearder on the report, it will change to Magnify icon.
    When I double click on that Group title which is "Item Type" in my report, it will load a new page beside "Main Report" in Crystal tool bar.
    Problem is it didn't contain Report Header/Footer or Page Header/Footer.
    I like this feature but it only display the group section is not enough for me.
    Why I like it is because my report will have different Item Type. Each type can list up to more than 1 page.
    I want to print the report by Item Type. That means Item A may be total 2 pages, Item B may be total 6 pages.
    All I need to do is load the page like I mention above, it will only contain that Item Type and click on Print to print out particular Item type.
    Another issue is If i supress this Group Section in crystal report during design, when I run the program I can't double click to open up new page beside Main report.
    Any idea and solution for my case????
    Thanks.
    Edited by: scsfdev on Mar 4, 2010 9:34 AM

    Your report will need re-designing. What you are seeing is an expected behavior. Consider redesigning your report - possibly using subreports.
    If i supress this Group Section in crystal report during design, when I run the program I can't double click
    - again, an expected behavior. You suppressed the GroupSection. E.g.; you made it invisible / non functional / not needed by suppressing it...
    Ludek

  • Report Map Section not updating after refresh

    Hi
    I have created a section in my report based on employee.  After executing the report for the first time the report map shows the section and each employee for which a section has been created.
    The is really useful as you can use the report map to navigate directly to info for a specific employee.
    When I refresh the query and select a different cost center a new list of employees is presented in the report, however the report map is not refreshed to relect this new list of employees.
    Is there a separate step to get the report map to update the sections for the changed variable selection?  (In this case I selected a different cost center and as a result got a new list of employees)
    Thanks
    Ian

    A few things I would suggest you do to determine where the problem lies.
    1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
    2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
    Good Luck,
    -John

  • How Both View Selector and Column Selector in one report dashboard section

    Can we use a view selector and column selector inside a report in one section of the dashboard?
    env: obiee 10g
    Appreciate any links and pointers
    Thanks in Advance
    Kris
    Edited by: user566193 on Mar 22, 2011 10:18 PM

    hi kris,
    Can we use a view selector and column selector inside a report in one section of the dashboard?Here view selector is nothing but having multiple views and selecting depends on what end user want to see.You are saying in a single report in once section only.
    If it is a single report you can go with using a column selector.
    Note:-View selector and column selector combination can be used.....but it looks wierd as you need to select view at the same time the corresponding column.
    UPDATED POST
    Yes you can have it by creating different compound layouts with pivots in it.
    Cheers,
    KK
    Edited by: Kranthi.K on Mar 22, 2011 11:27 PM

  • J!INQEFILE report TDS section wise

    Hi Gurus,
    In T-code J1INQEFILE,
    Report is not generated based on TDS section wise.
    Niether section code is provided in Selection screen nor in the report, as provided in selection screen of T-code J1INCHLN.
    While filing Quarterly TDS return, it is required to be filed section wise. 
    Regards
    Velu Mudaliar

    If i am understanding is correct, You want to see the report official withholding tax key wise?(194C, 194K, 194J,194I etc)
    If yes, J1INQEFILE provides the data as per income tax act/legal requirement, as per the income tax act we have to file the quarterly return like below
    TDS other than salaries have to file FORM 26Q, TDS on foreighn payments Form 27Q, for TCS Form 27EQ.
    If you want to see the official w/tax key wise tax deduction execute the j1inqefile with form 26Q and in excel file you can able to see the section wise deduction and details.
    or you can execute the J1INMIS required section wise.

  • Reports-Header Section Suppress

    Hi,
    I have one frame in header section and it is having the variable in vertical and horizondal valasticity property,
    While running the report there is no data in that header section, I want to suppress that first page
    Most Urgent
    Thanx for response

    Try using
    blankpages=no
    in command line
    (You need to go to latest patchset first, because there was a bug that blankpages=no would not work in earlier versions)

  • Show graphs before the report detail section

    Post Author: Dan4sure
    CA Forum: Charts and Graphs
    I have a report where I have graphs in the report footer and the report details in a subreport.  Is the a way to produce the same report without a subreport.  I.e. is there a way to show the graphs in the report header or before the detail section?
    Thanks, Dan

    Post Author: Dan4sure
    CA Forum: Charts and Graphs
    I figured out what to do by looking into the sample reports.  I can place graphs in the report header.
    Thanks, Dan

  • Unreconciled Transactions report - Summary section

    Hi,
    When our controller runs the Unreconciled Transactions report after doing a (external) bank reconciliation, there is a summary section after the list of the unreconciled transactions with the following:
         Total Debit in Books / Bank
         Total Credit in Books / Bank
         Total Open in Books / Bank
    For some reason this doesn't always print on the report. We are using the default template (i.e. no customization). Is there a setting or something in the reconciliation that determines whether this summary section is included on the printout? I can see it in PLD/edit layout but don't see anything that would indicate why it doesn't always print.
    On SBO2007A SP01 PL07.
    Thank you,
    Heather

    Hi Gordon,
    WeI haven't been able to determine a pattern yet. The controller is going to have me sit with them next time they process a reconciliation but in meantime thought I'd see if there was something we were missing.
    The only pattern is that out of the 3 companies/databases, it is only with one that we are seeing this happen. Is there anything in the localization? We have both Cdn & US localization.
    Thank you,
    Heather

  • Not able to see "Folder and Report Tasks" section in BI publisher

    Hi Expert,
    I am trying to use BI publisher, after login as Administrator/Administrator, all I can see are two folders: My Folder and Shared Folder. I did not see anywhere I could create new report. Could someone help me?
    Thanks a lot.

    You should have a group called 'XMLP_ADMIN' in your repository and administrator or the user you are using should be part of that group. Look into paint.rpd for all these.

  • Hyperion Interactive reporting - Pivot Section Facts Sequence / Order

    Requirement :
    Dynamically populating Month Name & Year as Column Name.
    Challenges :
    Using a computed colum and variable, we are able to assign the variable to the computed column and get the values as desired. We have 7 non computed columns and 12 computed columns to be displayed in the Pivot Section.
    All the functionalities are met except for displaying the 4 non computed columns first , the 12 computed columns secondly and remaining 3 non computed columns at the right end
    For Instance :
    The Pivot should display this.....
    Order Date Qty Amount Mar,10 Apr, 10........Feb, 11 Return Date Stock
    Instead, it is displaying as
    Order Date Qty Amount Return Date Stock Mar,10 Apr, 10........Feb, 11
    In the above scenario, my database columns are
    Order Date, Qty, Amount, Return Date, Stock
    and
    Computed Columns are :
    Mar,10 , Apr, 10........Feb, 11

    Is there a possibility to display Pivot Facts in a sequence order (computed & non computed items dynamically)?

  • Break Report into sections

    Hi, I have a data model with different groups. I want to be able to place the groups side by side. When I place the table side by side and preview it shows one at the top abd one below. An example of what I want is beow
    Group1 Group2
    1 2 4 5 qqq ddd vvv bbb
    ccc bbb mmm kkk
    zzz vvv bbb aaa
    The preview instead shows group2 under group1.
    Can you tell me if this is possible. Group1 can grow independent of group2 and vice versa.
    Thanks

    Hi user11980169,
    Sure you can - create an outer table, size the columns appropriately, and hide the borders.
    Put each of groups in their own table inside a cell of the outer table in the appropriate column.
    Regards,
    Gareth
    Web: http://www.virtuate.com
    Blog: http://garethroberts.blogspot.com

Maybe you are looking for