Report categories for selection screen in HR programming

Hi all,
i want to know what report category has to be used for displaying personnel number,personnel area and employee subgroup. you can also suggest me on a report category that coincides with above fields along with other fields. please give me a immediate reply.
Thanks & Regards,
Nanda

Hi Nanda
Why do not use the F4 help for that? You can bind an HR Report Category to a report from its "Attributes" screen. There you can use the F4 list and the description of report categories are more or less says something. There you can also define your own report category.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Similar Messages

Selection-screen in module program

Hi,
I have created a module pool prog.
Now the new regd. is that I want to create selection-screen before displying the actual screen.
But when I m trying to use selection screen then I m getting the message that it is not possible in type 'M' as my program is module pool.
I m using screen 9000 to display the records, now where to write selection screen in the program?
I think in PBO but getting some error, I have created one screen and in that defined a subscreen but it is giving some error.
So any body knows how to add selection screen in 'M' type program?
Thankx in advance.
Umesh

Hi,
You can create a selection-screen for a module pool program.
Create a new program with executable type. Create the selection screen as you would do in a normal program. Once you give data in the selection and press F8 button, based on the logics written, the O/P must appear in a table control. This is what your requirement is:
A example below for your understanding.
name of the prog : ZTEST
Type: Exectable report (I)
*----Selection Screen -
SELECTION-SCREEN BEGIN OF BLOCK IPDATA WITH FRAME TITLE TEXT-001.
PARAMETERS: PR_MONTH LIKE BOITEM-SPMON.
SELECT-OPTIONS: SO_VKGRP FOR KNVV-VKGRP.
SELECTION-SCREEN END OF BLOCK IPDATA.
SELECTION-SCREEN BEGIN OF BLOCK ORGDATA WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: SO_REGIO FOR KNA1-REGIO,
                SO_KUNNR FOR KNA1-KUNNR,
                SO_WERKS FOR T001W-WERKS.
SELECTION-SCREEN END OF BLOCK ORGDATA.
*--Selection Screen Events--
START-OF-SELECTION.
W_CURMFDAY = SY-DATUM.
W_CURMFDAY+6(2) = '01'.
PERFORM F001_GETDATA.
IF SY-DBCNT EQ 0.
    MESSAGE S017(ZSFL).
    EXIT.
ENDIF.
PERFORM F002_ADDITIONALDATA.
CALL SCREEN 100.
For this screen 100, both the PBO and PAI can be declared in this main program itself.
Regards,
JLN.

Calling another report by passing selection screen parameter

Hi,
I have created a report "ZREPA" with selection screen parameter say, "creator".
Nw, i hv to call that report "ZREPA" from another report say "ZREPB" by passing an value to the selection screen field "creator".
Can anyone tell me how to resolve this??
Thanks,
Aaru.

Hi,
You can call one selection screen from other selection screen program using SUBMIT command.
The syntax is as follows -
codeSUBMIT... VIA SELECTION-SCREEN
USING SELECTION-SET <var>
WITH <sel> <criterion>
WITH FREE SELECTIONS <freesel>
WITH SELECTION-TABLE <rspar>.[/code]
e.g.
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
codeREPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.[/code]
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
rspar TYPE TABLE OF rsparams,
wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
/ 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
WHEN 4.
seltab-sign = 'I'. seltab-option = 'BT'.
seltab-low = 1. seltab-high = 5.
APPEND seltab.
SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
WITH paramet eq 'Selection 1'
WITH selecto IN seltab
WITH selecto ne 3
AND RETURN.
WHEN 5.
wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
wa_rspar-low = 14. wa_rspar-high = 17.
APPEND wa_rspar TO rspar.
wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
wa_rspar-low = 'Selection 2'.
APPEND wa_rspar TO rspar.
wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
wa_rspar-low = 10.
APPEND wa_rspar TO rspar.
SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar
AND RETURN.
ENDCASE.
=> To leave a called program, you can use SUBMIT .... AND RETURN. by choosing F3 or F15 from list level 0 of the called report.
Regards,
Omkaram.

Calling selection screen of another program

Hi all,
     Am trying to call a program from a enhancement section of IW3K transaction using the following statement.But the selection screen of the program is not getting displayed.
but the screen is dispalyed when i run the statement in debug mode.
Can anyone help me on this...
useful answers will be rewarded.
submit Z XXXXX            via selection-screen
                                   WITH s_ispla = 'BEKD'
                                   WITH p_rsnum = CAUFVD-rsnum
                                   WITH s_rspos in   i_range_tab
                                   and RETURN.

hi,
You can call one selection screen from other selection screen program using SUBMIT command.
The syntax is as follows -
codeSUBMIT... VIA SELECTION-SCREEN
USING SELECTION-SET <var>
WITH <sel> <criterion>
WITH FREE SELECTIONS <freesel>
WITH SELECTION-TABLE <rspar>.[/code]
e.g.
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
codeREPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.[/code]
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
codeREPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
rspar TYPE TABLE OF rsparams,
wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
/ 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
WHEN 4.
seltab-sign = 'I'. seltab-option = 'BT'.
seltab-low = 1. seltab-high = 5.
APPEND seltab.
SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
WITH paramet eq 'Selection 1'
WITH selecto IN seltab
WITH selecto ne 3
AND RETURN.
WHEN 5.
wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
wa_rspar-low = 14. wa_rspar-high = 17.
APPEND wa_rspar TO rspar.
wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
wa_rspar-low = 'Selection 2'.
APPEND wa_rspar TO rspar.
wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
wa_rspar-low = 10.
APPEND wa_rspar TO rspar.
SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar
AND RETURN.
ENDCASE.[/code]
=> To leave a called program, you can use SUBMIT .... AND RETURN. by choosing F3 or F15 from list level 0 of the called report.

Tool-tip text for Selection screen buttons.

Hi all,
Got another requirement and need your help.
I have a user-defined selection screen in my program. I would like to know if it is possible to have a tool-tip text ( quick info ) for the Pushbuttons on this selection screen.
Any help is appreciated.
Regards,
Anand Mandalika.

Function Buttons.
For report programs you declare the selection screen appearence with select-options, parameters and selection-screen commands, function key is one of them.
So a quick example
REPORT ZYX.
TYPE-POOLS: ICON.
TABLES: SSCRFIELDS.
DATA: WA_FNTXT TYPE SMP_DYNTXT.
SELECTION-SCREEN FUNCTION KEY 1.
INITIALIZATION.
WA_FNTXT-ICON_ID = ICON_GREEN_LIGHT.
WA_FNTXT-TEXT = 'Go Faster'.
WA_FNTXT-QUICKINFO = 'NO Speed Cameras'.
SSCRFIELDS-FUNCTXT_01 = WA_FNTXT.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
WHEN 'FC01'.
etc.

Problem with the selection screen in submit program

Hi Friends,
i am facing the problem wih the selection screen in submit program. in my Module pool program i am using the submit program statement, When i execute the program , The module program display the submit program selections creen.
I have implemented the code same as below.
submit ztest with tknum =p_tknum and return.
Can you pleaes help me how to avoid the submit program selection screen.
Thanks,
Charan

Hi Charan,
You have to give the selection screen values when you submit a job.
Press F1 on submit and you will see more details.
Here is an example from ABAP Documentation.
Program accessed
REPORT report1.
DATA text(10) TYPE c.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
     DATA: text(10)   TYPE c,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Regards,
Jovito.

Code for selection screen, urgent

Hi Everyone,
I need code for selection screen.
I have four radio buttons, p1, p2,p3,p4(assume)
If I select second radiobutton, remaining three radiobuttons should be in disable mode and also the information under them should be in disable mode. Give the coding details. Thanks in advance. U will be rewarded.
Regards,
Nagaraju

Hi,
REPORT ZTEST222 .
PARAMETERS : p_add RADIOBUTTON GROUP radi
                         USER-COMMAND radio MODIF ID MOD,
p_disp RADIOBUTTON GROUP radi DEFAULT 'X' MODIF ID pod,
p_chng RADIOBUTTON GROUP radi MODIF ID rad,
p_er_log RADIOBUTTON GROUP radi MODIF ID cod.
SELECT-OPTIONS : s_idn    FOR vendor   MODIF ID mod,
                               s_pcode FOR ws_c_pcode MODIF ID pod.
PARAMETERS: p_plant    LIKE zaw_pol_plan-plant   MODIF ID rad,
             p_zzvend   LIKE zaw_pol_plan-zzvendor   MODIF ID cod.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_add EQ 'X'.
      IF screen-group1 EQ 'MOD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_disp EQ 'X'.
      IF screen-group1 EQ 'POD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_chng EQ 'X'.
      IF screen-group1 EQ 'RAD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_er_log EQ 'X'.
      IF screen-group1 EQ 'COD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
Pls. reward if useful
    ENDLOOP.
Pls. reward if useful

How to set default variant for selection screen

Hi,
I want to make one variant as default for selection screen for one user.
For eg., take COOIS. For the selection screen, i have 3 variants. But i want one variant to be default. Thsi is not for all users. Thsi is for particular user.
I am not seeing any way to do this. please help me..
Thanks
Srini

Hi,
If you are using Z program then you can ask your developer to get Variant name Runtime from Parameter ID.
This means you decide a Parameter ID name : ZVAR in your Z program and ask your developer to load variant each time your Z program loads.
Now, second step will be using SU01 transaction you can set value of ZVAR in Parameters tab for the user. This value will be the variant which you created for this user.
This will solve your problem and you can make n number of variants and assign it to different users.
Regards,
Arpit

Dinamic variant for selection screen

Hi,
I got a requirement where i need a Dynamic variant for selection screen .There is a date field in the selection screen i want to create a variant such that when i choose it,it should give the current day date in selection screen.can anyone help me.
Regards,
Ravi

Hi,
Using Customer Exit code you can give it.
Create a Customer Exit Variable and write simple code in CMOD. See the usefull Exit code for reports in the following url.
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
WHEN 'ZV_DAT'.
    IF i_step = 1 .
      CLEAR l_s_range.
      l_s_range-low = sy-datum.
      l_s_range-opt = 'EQ'.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
    ENDIF.
Thanks
Reddy

Help For selection screen

Hi,
I dont have any selection screen in my program.
But when user press enter the transaction he should get some screen in which some message is written" This pgm is for background".
Plese suggest me.

Try this code:
AT SELECTION-SCREEN.
if sy-batch <> 'X'.
Display ur message
endif.
Regards,
Joy.

Transaction Variant for Selection Screen

Hi, experts!
A question regarding transaction variants: Is it possible to create screen variants and transaction variants via SHD0 for selection screens? I' ve created a customer report with one selection screen including parameters and select options and would like to provide the users with a variant transaction for this.
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported. And trying to create a transaction variant via SHD0 fails because values entered in the selection screen parameters and select options help screens are not saved and presented.
Any hints are more than welcome!
Regards,
Thomas

You wrote
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported.
But, give the variant a name beginning with "CUS&" and this variant will be transported. Variant beginning with "CUS&" or "SAP&" are so-called "system variant" and are transported automatically. You can then copy the transaction code and use this new variant in the new transaction.
Regards,
Raymond

Global Variable for selection screen variable

Hi All,
We need to create a report where calendar day has to be included in the selection screen.Later after executing the report we should be able to retrieve the selection screen input for calendar day and modify it and use the modified one for other calculations.Can somebody help me out in finding the global variable in the variable exit where we find all the inputs for selection screen variables....
Regards,
Shravani

shravani,
I_vnam will store the varaible names...if you have varaible in the query...
please use this code for ur help...
DATA: ww_der_date LIKE sy-datum,
        wzdate LIKE sy-datum,
        wzact_gi_dte TYPE /bi0/oiact_gi_dte.
wzact_gi_dte = sy-datum.
IF i_step = 2.
    READ TABLE i_t_var_range INTO wa_i_t_var_range WITH KEY vnam =
    'ZNODAYS'.
    ww_der_date = sy-datum - wa_i_t_var_range-low.
        CLEAR wa_i_t_var_range.
    IF i_vnam = 'ZVAGIDCUSTEXIT'.
      CLEAR l_s_range.
      l_s_range-low    = ww_der_date .
      l_s_range-high   = wzact_gi_dte.
      l_s_range-sign   = 'I'.
      l_s_range-opt    = 'BT'.
      APPEND l_s_range TO e_t_range.
      CLEAR l_s_range.
    ENDIF.
ENDIF.
in this case user will enter no.of days in ZNODAYS and that being is used in calculation and used in the next varaible....

How to create variant for selection screen which is in subscreen

Hi,
How to create variant for selection screen which is in subscreen in a module pool program?
it is very urgent.
Thanks in advance.

Hi,
You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
Regards
Sudheer

How to write HTML code in Web Template for selection screen

Hello All,
Is it possible to write a html code in the web template html tag so that the output of the html is displayed in the selection screen, i.e before the execution of query.
I know that we can write html, which will be displayed once the query has been executed, but can it be done for selection screen.
if so, how.
My exact requirement is : to display a 2-3 lines of text in the selection criteria screen - sort of, various options available to user for entering values in the selection screen. I was thinking of putting this text using HTML code in the selection screen.
Regards,
Nagendra.

Hi Erick,
No, unfortunately nobody replied to this thread. So i assumed it is not possible to modify the selection screen thru html code.
Btw, as my requirement was to provide user with multiple answers on the selection screen. I did the validations on customer exit and popped an errror dialog when applicable.
Regards,
Nagendra.

Change default value (200) of Max No of Hits for selection screen in WAD

How do i change the default value of Maximum Number of Hits from 200 to 1000 for selection screen's find box in Web Application Designer .
Thanks in Advance
Points will be surely Rewarded

Dear Hammad,
Please refer to the wiki created by me,
http://wiki.sdn.sap.com/wiki/display/BI/Information+on+the+user+setting+for+the+selector+dialog
Regards,
Arvind

Report categories for selection screen in HR programming

Similar Messages

Maybe you are looking for