Report Changes and New Reports in R12 - A useful document

Hi All,
I found this document.
I hope it will be useful for everyone
EBS R12: Financial Reports impacted by the R12 (12.0 and 12.1) Upgrade [ID 1110684.1]
Pleaselet me know if there are any addional reports or completely new reports available in R12.
Thanks and Regards,
MPH

997361 wrote:
Hi,
What are the new reporting in R12? I am not clear on this.
Thanks
KNhttps://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
http://docs.oracle.com/cd/E18727_01/index.htm
https://forums.oracle.com/forums/search.jspa?threadID=&q=RCD&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Similar Messages

Views on CF Report Builder and Crystal Report

Dear all,
I would like to get your opinions on CF Report Builder and
Crystal Report.
As we all know, CF Report Builder is a new reporting tool.
But I find it very difficult to design a complex report maybe due
to limitation in its functionalities. Sometimes the tool shutdowns
by itself without any warning and reason. But the output is nicely
presented on a flash paper / pdf and it can be run on non-MS
platforms.
On the other hand, Crystal Report is a more matured product
but runs only on MS platform. It is very easy to use and very
powerful. I have been using it for almost 10 years. But the output
is not nicely presented on the web browser unless if we purchase
Crystal Report Enterprise to generate the report which is very
costly.
Can you all share your views? I need to make decision which
tool(s) to use. Really appreciate it.
Cheers,
Keiko

Hi Keiko,
Yes, CF Report builder is new and initially there was few
issues with this. But I guess now it's good after hotfixes.
Well, I am using CF Report Builder. It's good for me. You can
also design and develop complex reports, that depends upon the
query you are writing. You can also add subreports to your main
reports.
Mainly CF Report is platform independent and you can also
generate reports in PDF, EXCEL and FlashPaper.
Crystal Report is no doubt is very good, and it's there for
long years. I agree you can create complex reports with this, but
you also can do the same in CF also. You are using this for last 10
years, so I guess you should try something new and that is CF
Report Builder and you can judge then.
I am sure you will have fun with CF.
Thanks
Sankalan
(www.mindfiresolutions.com)

Difference between Crsytal Report 2011 and Crystal Report for Enterprise 4

difference between Crystal Report 2011 and Crystal Report for Enterprise 4.0?
I think Crystl Reprt 2011 has more function, is it right?

Hi,
I recently attended a SAP Virtual trianing on SAP Business Objects BI 4.0.
Here are few extracts from that which probably shows some light to you:
SAP Crystal Reports 2011
1. UI and associated processing servers remain the same as CR 2008
2. Incremental update to CR 2008 with a few new features*
3. Continue to provide current CR 2008 functionality as-is for existing customers
SAP Crystal Reports for Enterprise 4.0
1. Major update & redesign of the Crystal Reports Designer and associated processing servers
2. Focus on streamlined report design, reporting against BI 4.0 Universe, & reporting against SAP BW data
3. Provide the foundation for all future releases of Crystal Reports
Differences between these two releases:
Data Source & Usage Type                                       General Recommendation
1. SAP BusinessObjects BI 4.0                                        SAP Crystal Reports Relational Universe (UNX) for Enterprise
OLAP Universe (UNX)
2. SAP NetWeaver BW 7 BEx Query (BICS)                    SAP Crystal Reports for Enterprise
3. SAP NetWeaver BW 3.5 BEx Query                             SAP Crystal Reports 2011
4. SAP Profitability Cost Management                              SAP Crystal Reports for Enterprise through Analysis View
SAP Strategy Management
SAP Budget, Planning and Consolidation
SAP Extended Analytics
5. Platform Driven Alerting                                                SAP Crystal Reports for Enterprise
6. Business Views                                                           SAP Crystal Reports 2011
7. Direct RDBMS or OLAP access                                    SAP Crystal Reports 2011
    SAP ERP/ Live Office Content/
    Enterprise search content
Regards
Gowtham

Can 10g OAS run 10g Report server and 6i reports together?

Re-posted from the OAS thread: Can 10g OAS run 10g Report server and 6i reports together?
We have need to run 6i and 10g reports from the same physical server running OAS 10g.
Are there issues / conflicts?
There are hundreds of 6i reports called from many applications. Converting completely is a separate project on the books.
The need is to utilize 10g graphs on this urgent project. The graphing in 6i has not gotten along here with RAC and other distributed architecture. Additionally, I believe the 6i graph runtime would have to be installed on each client workstation... again, hundreds.
Thank you.

Hello,
You can install OAS 10g and Reports 6i on the same server as long as they are installed in different ORACLE_HOME ..
Take car to the value of the variable PATH ..
Regards

How do I set security on Leopard to prompt admin password before any changes - eg new instal , updates etc. Used to have this before recent upgrade to leopard

How do I set security on Leopard to prompt admin password before any changes - eg new instal , updates etc.
Used to have this before recent upgrade to Leopard and keen to keep this function

Run from a standard account and not an admin one.

Oracle Reports 11g - Add new report server

I have installed Weblogic 10.3.2 and Forms and Reports 11.1.0 ontop.
I have configured my forms in the same way as 10g iAS, by adding to formsweb.cfg etc etc. The forms are fine.
On 10g iAS reports, I used to select the report item from the iAS OEM screen and then edit configuration, changing the sourceDir, tempDir and cacheDir.
Alternatively, instead of uning the in-process server, how can I add a new report server and use that intead? I would prefer to add a new report server. I cannot see the section in the doco that explains this.

Hi,
Creating new reports servers isnt too bad in 11g. Please see the following oracle note on creating additional reports standalone reports servers for 11g Reports running on WebLogic: Oracle Note 961174.1
Hope this helps.
Thank you,
Gavin
http://www.pitss.com

Crystal Reports - Aggregation and Sub-report design for reconciliation

Hello,
I apologize for posting the question in this form (I am new to Crystal reports - so am trying to get my hands around the development)
I created two crystal reports
1. Report on top of BW
Fields:
A. Company Code
B. Vendor
C. Local Currency
D. Total Amount
2. Report on top of ECC
Fields:
A. Company Code
B. Vendor
C. Local Currency
D. Total Amount (This is a formula, as I used the total amount and debit/credit indicator to get the negative sign for amount)
Once I have created these two reports,
The first question is,
In the second report for the combination of the three characteristics mentioned above I have multiple rows, how can I aggregate them similar to BW where I have one row for a given combination.
The second question is,
I created a third report and I used the option you mentioned earlier "Insert --> Sub-report". When I used this option I selected the first report on top of BW and inserted it into Data Field and then used the same option to insert the second report on top of ECC and inserted it in Data field below the first report.
Once I had these reports inserted, I created formula fields in the third report for the following fields
1. Company Code
2. Vendor
3. Local Currency
4. Total Amount
From here on, I am not sure how can I link the fields from the above reports to the third report and also how can I do reconciliation between these two reports.
I really appreciate your help in this regards.
Thanks
Dharma.

Hi,
The first question is,
In the second report for the combination of the three characteristics mentioned above I have multiple rows, how can I aggregate them similar to BW where I have one row for a given combination.
>> You could create Groups in Crystal Reports and create totals in the report on top of ERP.
The second question is,
I created a third report and I used the option you mentioned earlier "Insert --> Sub-report". When I used this option I selected the first report on top of BW and inserted it into Data Field and then used the same option to insert the second report on top of ECC and inserted it in Data field below the first report.
Once I had these reports inserted, I created formula fields in the third report for the following fields
1. Company Code
2. Vendor
3. Local Currency
4. Total Amount
From here on, I am not sure how can I link the fields from the above reports to the third report and also how can I do reconciliation between these two reports.
>> Whats the source of the third report ? ERP or BW ?
You can use the Subreport Linking feature (right click on the report in the context menu) to setup the linking from the main report to the subreport
Ingo

Crystal Reports 2010 and activex report viewer.

I have an application built using VS 2010, and the matching crystal reports. However, the application includes legacy VB 6 components, and they are also used to generate reports.
Up until now everything has been fine, and the setup kits we build distribute the single crystal runtime required. Now I have discovered that CR 2010 does not allow us to distribute the activex viewer, crviewer.dll, and it isn't installed with the runtime.
I have spent a huge amount of time updating the vb6 projects to reference crviewer.dll version 13, since it is supplied with Crystal for VS 2010, only to find out that we are not allowed to use it
If we're not allowed to distribute it, and the runtime doesn't install it, why do we have it?
What workaround can anybody suggest? I don't really want to have to distribute 2 runtimes (2008 and 2010), and I don't want to have to undo all the changes I've made to the vb6 stuff (this really is write-only code).

Unfortunately, the answer I have for you is most likely one that you do not want;
Lots and lots of info on the RDC and VB6 and .NET on this web site (use the search box in the top right corner of this web page). There are KBs, Wikis and Blogs that I personally created. In a nut shell, the RDC was retired in version CR XI R2 (11.5). E.g.; two versions ago. While you will find the crxddrt.dll and crviewer.dll included with CRVS2010, these are for internal purposes and you are not licensed to use these (craxddrt.dll was a special license only in any version of CR). Your only option is to rewrite the code using the CR .NET SDK. As for the resources available on this website. See the following small sample;
Use of the Report Designer Component (RDC) in VS .NET
Report Designer Component - Past, Present & Future
Short history and resources for Crystal Reports Software Developer Kits (SDK)
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Different display on client report builder and web reports

Hi all, I have build a report in report 6i version Report Builder 6.0.8.13.1.And I set the page to 8.5*11 ,and it runs well in the client ,but when I put it on the UNIX SERVER,and run it from web URL,It displayed different from the client report builder.The web report is "smaller" than the client report ,but the font size is as same as the client .
My HPUX is 11x,and display the Chinese report .
Any body know why ?give me some advice ,thank u very much.

Hi
If you had built the report definition on Windows and then moved this to Unix server, you may find different fonts in use. This is becuase your Unix setup does not have the same fonts install. At design time, You need to use fonts which are available on Unix also. The same fonts shaould also be installed for printer in Unix i.e. the AFM/PFM font files should be kept under $ORACLE_HOME/guicommonX/tkXX/admin/AFM or PFM directory. This would give you the same output and would lessen the porting affect.
Thanks
Rohit

Difference Between Crystal Report Template and Sub Report

I am not able to get the Report Template Option/menu.
I am working with Visual Studio 2005 , Crystal Report Version 10.2
Do i need to have Crystal Report Server in order to work with Template.
Also i will like to know the diff. between Template and Sub Report?

Hello,
The Report Template Wizard is not part of Crystal in .NET. You need to upgrade to the full version of Crystal Reports.
Template is a base report to work from. Subreport is another report object that can be inserted into a section of the main report.
Thank you
Don

Unable to save reports to enterprise from Crystal Reports 2013 and Crystal Reports for Enterprise

Dear Expert,
when we tried to save report to enterprise, error happened:
"Failed to find a Report Application Server."
We closed BO server firewall.
We could check report from PC by browser.
But when we save report from CR 2013, then error happened.
Then we install CR enterprise and save report is ok from same PC.
We launch latest patches too.
Anyone see this before? Please kindly help~
Environment:
SAP Crystal Reports 2013
SAP Business Intelligence 4.0
Regards,
April.

April, since you have CR4E, you also have BI and thus free phone support included. My suggestion would be to create a phone incident and work with an SAP engineer on the issue. Only saying because it looks like you're somewhat anxious to get this going(?).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

CRM Interactive Reports - CRM and BI Reporting client same

Hello all,
I am setting up CRM Interactive reports in CRM 7.0 wherein the CRM client and the BI Reporting client are both the same. I know it is not recommended by SAP, but our requirement is very less.
I am following the steps as mentioned in the Best Practices C41. But, when I am trying to set up a source SAP system in RSA1(Section 4.14 of C41), i get an error saying that 'Source system XXXCLNTYYY already exists'. This is the same system which has already come under the BI node in RSA1.
Since we are using the same client for both the systems, how do I rectify this error?
Please help!
Regards
Debolina

Dear Srinivas,
One of the purposes of CRM Interactive reporting is quick-enablement of frequently used reports. Ofcourse these differ in all aspects with BI reports. These are faster and accurate when the data population is small.
It is not suggested to use dedicated BI server for Interactive reporting.
Anyways we can use both Interactive and BI reports simultaneously as per your client's requirement.
Hope it helps.
Thanks
Vikas
Edited by: Vikas Patil on Jun 7, 2010 5:58 PM
Edited by: Vikas Patil on Jun 7, 2010 5:59 PM

Report Optimization and Sub Reports

Post Author: olaszb
CA Forum: Crystal Reports
Hello,I am currently working with Crystal Reports XI Release 2 and have questions about optimization. We have a dataset (.NET) generated from Oracle and then passed to Crystal. For our largest report it is taking 15 seconds for the dataset to be generated, but over 3 minuets for Crystal to generate the report. We have 14 sub reports within this report. I'm pretty certain this is the bottle neck.Any sub report optimization suggestions? Would arrays be the way to go instead?

Post Author: olaszb
CA Forum: Crystal Reports
I went through the report and suppressed all sub reports and this cut the time down by 1/3 but still too slow. On our largest report we are getting 376 pages and with the sub reports suppressed there are 263 pages returned. Does anyone know if still goes through/caches the info of a sub report even if the report is suppressed?

SSIS DataFlow - copy only changed and new records

I am copying a few tables each night from one SQL server to another. At the moment I delete every record from the destination table, and then copy all records from the source table with a SSIS Data Flow Task.
That works fine so far, but I would like to copy only changed or new rows. What would be the best way with SSIS to achieve this? I am quite new to SSIS, I have no idea if my goal is possible and how...

I am copying a few tables each night from one SQL server to another. At the moment I delete every record from the destination table, and then copy all records from the source table with a SSIS Data Flow Task.
That works fine so far, but I would like to copy only changed or new rows. What would be the best way with SSIS to achieve this? I am quite new to SSIS, I have no idea if my goal is possible and how...
Many ways:
1st way
1.use Merge function from source to destination table where you can have this conditions like load when not matched and don't load when matched.
2. follow this ssis steps:
execute sql task where you can write merge function from source to destination
http://blog.sqlauthority.com/2008/08/28/sql-server-2008-introduction-to-merge-statement-one-statement-for-insert-update-delete/
2nd way:
oledb source 2.lookup outputlookup 3. oledb destination table
and you can mention in lookup as no match output.
3rd way:
you can use scd transformation task in ssis...
4th way:
you can use if exists update if not exists insert.. see below
http://blogs.msdn.com/b/miah/archive/2008/02/17/sql-if-exists-update-else-insert.aspx
http://sequelserver.blogspot.com/2011/02/alternate-to-if-exists-update-else.html
- please mark correct answers

What diff between BIP AttachEntity Report Generation and BIP Report Generation?

Hi all,
I want to know the two WF has what's difference.
I had seen they have same method and step.
Actually,I want to do a function, when click a button,will generate BIP reports.
Using the BIP Report Gneration can do this.
But I want pop a window to open or save the report after the WF finished work.
Could BIP AttachEntity Report Generation do that?
I had similitude it seem same as BIP Report Gneration.
Be appropriate to you if you can answer the question.
Thanks,
Wenqin

Ok, let me guess, you are seeing an error that says an invalid printer was selected, right? Well there is a bug in your code but it has nothing to do with the printer that you have selected. Specifically you have some of the margin values set to zero -- which is invalid. The margins have to have a value of at least 1. In case you're interested, I followed down the logic and inside the print report VI the code, for some unknown reason (NI is checking into it), remapps an error code that correctly identifies invalid margins to report one that reports an invalid printer name. Apparently this was first reported in 2008.
Verified this behavior of both LV2013 and 2014.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Report Changes and New Reports in R12 - A useful document

Similar Messages

Maybe you are looking for