Report changes not reflected in Portal

Hi,
I have a report designed in Business Intelligence Front end tool.  I have added that report to a role created in BI backend and assigned the report to that role.  I am executing the report in Portal through SSO and the report is executing successfully.
I  made changes in the report and assigned it to the role again.  When i execute the report in portal, the changes are not reflected.  But when i check the same report in Portal using another team mate id, he is able to see the changed report.  We checked the iview of the report in portal and the changed report is there in portal.  But i donno why it is not showing up for me.   We cleared the Browser cache and checked again but the result is same.  We both have the same roles, so nothing to do with the Roles.  I think the problem is in portal, but dont have an idea on where to check it.
Help me in this regard.  Thanks for your time.
Regards,
Murali

Hello Murali,
This is strange but please do this simple test & confirm:
Run the iView using your colleague's id. Copy the complete URL from the browser.
Open another fresh browser session, pasting the URL login using your credentials.
What do you see now? Do you see the change?
This a simple method to filter out the issue..whether its related to backend or not.
Awaiting Reply.
Regards,
Ritu

Similar Messages

  • Changes not reflected in portal after successful import

    Hello,
    I am having trouble with some transports in NWDI. I made some changes to the ESS Address Details dynpro and tested them in the development portal. I then imported them into CONS and the import ran successfully. However I cannot see the changes in the portal. I then ran the TCS Deployer and there was a long list of entries in the list of deployments for my buildspace. I then triggered the auto deployment and waited a few hours. This did not help either. I also checked to confirm that SDM was up and running which it was. Is anybody able to give me some advice on this?
    Thanks a lot,
    Ashley Butterfield

    i have faced the same problem, but after 30 hours all the deployements are done, we got some thing around 511 deployement request on the consolidation server,
    Cheers,
    Apparao

  • SPRO changes not reflecting in portal

    Hi Experts,
    We have made some changes in SPRO in Dev. We could see the changes in Portal Dev. The same we transported to QA but we could not see the changes in QA portal. We did cache refresh in Navigation but still we are unable to see the changes in portal. Any suggesstions.
    Please help us.
    Regards
    Sowmya

    Hi Sowmya ,
    Try to invalidate Metadata Cache by using aRFC Metadata Invalidation tool, Procedure mentioned in the attached link
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10465350-b4f5-2910-61ba-a58282b3b6df&overridelayout=true
    Srinivas

  • SAP Portal changes not reflect in all the  servers without  reboot?

    Dear  SDN Members
    We have  one sap ep 7.0 eh1  main instance   and  4 other portal instances.every time  we tranport any  portal develpment work  such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
    a solution if  exists to avoid  bouncing of all instances when a portal development work is  transported.
    Why does the changes not reflect in all the servers without the reboot??
    Thanks
    Chandra

    Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
    to avoid bouncing of all the instances. please let me know if you have any other suggestions.
    actually we have  a central portal instance and 4 other  portal servers connected  through a
    load balancer.Any tranport we move to central instance should refelect the changes in all
    other portal instances.But we need to restart all the instances to see the new changes.
    We are trying to find a solution if availbel which prevents server-restarts after each transport.
    Thanks
    Sekhar

  • TLN changes not reflecting

    Hi All,
    I have a requirement of customizing the TLN. I am modifying the CSS file from the toplevelnavigation.par in NWDS and then created an iView . But the changes done in CSS are not reflecting in portal's TLN.
    What can be done to see the changes ?
    Thanks,
    Nishant Singh

    hi,
    are you gettting any error at time of execution or your modifications didn.t effecting the TLN?
    did you check with the iview's preview.is it working fine? upload yor modifiedpar file with different name or (make a copy of you origina par file) cretae an ivew with modified par and check whether you are getting desired output and then you assign it to framework page.there may be a error in the CSS or mogified jsp file coding
    Regards
    Mahesh

  • Changes in Crystal reports are not reflecting after publishing

    Dear SDN Mates,
    We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
    Can anyone please help me on this.
    Thanks and Regards
    Arun S

    Hello Prathamesh,
    After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
    This is happening for all reports. Can you please suggest me on this.
    Thanks and regards
    Arun S

  • Custom report stored procedure changes not reflecting

    Hi,
    I have a custom report which works fine but now I want to do some changes in stored procedure. The stored procedure compiles successfully but the changes are not reflected in the report. Am I missing out something as I am assuming that once the stored procedure is saved, the changes must reflect immediately.
    Regards,
    Rahul Sharma

    I did some changes in the where clause to include few more input parameters and thats it. I have not changed anything else. Moreover, even if I try to introduce an error intentionally, OIM is not picking it up. Is there any other reference which I need to change?

  • Field lables changes in ESS iView not reflected on portal

    Hi All,
    I am trying to customize the SAP ESS Address DC (webdynpro Java) for South Africa region as per the SAP OSS note (No: 1428933).
    In order to incorporate the changes I have imported the ess/za/addr DC into NWDS. I have changed the label text as per the OSS note and deployed the DC but changes are not reflecting in the portal
    I did some more test on Label text;
    1. Removed the Label text property value from DC and deployed the application,  when I run the application during runtime screen is not showing any label text message for the label since I made it to empty.
    1. I added my custom text message to label text value instead of standard label text value and deployed the application, when I run the application during run time screen is automaticaly showing the standard label text value not my custom label text value.
    I'm trying to figure out from where these field labels value are coming from? Theoretically it should reflect field lables whats given in webdynpro but thats not the case here.
    From where Label field value is coming?. Help me out in this. Thanks,
    Regards, Suresh KB

    If you are just changing the field label the recommended approach is to do it through Web Dynpro UI personalisation.  DO NOT user NWDI to change the source code just for field label change.  The way you change through UI personalisation is locate the iView in portal content, and select preview of iView then use CTRL+RIGHT click mouse button on the field that you want to change the text, you will see properties of selected field in a popup window where you can change the default text.  Once you change it, and apply the changes you will be able to verify you changes in the iView properties (additional properties will be automatically created for the change you made).  Now check the personal data service under ESS role you should see the change.
    Hope this helps
    Siva

  • Changes not reflecting in Report designer after Transports

    Hi,
       I have made some changes to a Report in the report designer and transported it to Quality and Acceptance systems. But the changes are reflecting in Quality system not in Acceptance server. In Acceptance sever the changes are seen in the report physically but when i execute the report i still see the old format. I tried transporting the request again to the system but no luck.
    Cleared the Cache in Acceptance still no luck. Also regenerated the base query in RSRT and no effect on the report. Any idea?
    Thanks,
    Praveen

    Hi Praveen,
    Make sure you have collected all the objects of the report.
    You may check this in (development) RSA1->Transport Connection. Select  that report and see if any objects are still not under $TMP or under any other Package and not got collected in your previous TR.
    Regards,
    Pratap Sone

  • Universe export - data changes not reflecting in Report

    Hi
    The changes and the latest updates in the database are not reflecting in reports,
    even if i export the universe again.
    and i have refreshed the reports, that even not reflecting.
    i did Edit query and Run query  this action also not bringing the latest data to reports
    why this happens ?
    how to solve this issue ?
    Regards
    Dineshkumar

    You can search for KB articles on SAP Service Market Place .
    Here is first :
    Symptom
    You make changes a local Universe in Designer.
    When refreshing the report, in Desktop Intelligence, the results do not reflect Universe update.
    It used to be enough to simply refresh report's data, for Dataprovider to show object changes from the Semantic layer.
    Change of behaviour in SP3 codeline: the DeskI Query Panel does not automatically pick up the latest modifications made to the local Universe.
    Reproducing the Issue
    Using BusinessObjects Desktop Intelligence XIR2 SP3:
    Using your universe (eFashion), create and refresh a simple Desktop Intelligence report (.rep).
    Make a simple change to the universe (like renaming a field/ object name) and save these changes.
    Go back to the open DeskI report and try to refresh the data provider using: 'Data/Refresh Data'.
    This will not show the latest changes.
    However, if you follow the same workflow using XIR2 SP2, the universe update will be immediately visible (in the report) simply after refresh.
    Cause
    This is not a product regression, but intentional change in application's code delivered with FixPack3.1.
    Fix Request ADAPT00818520 changed the application's behaviour: << When a restricted user is logged on to view a Desktop Intelligence document, prompt windows may be slow to open. >>
    Resolution
    In Desktop Intelligence menu, go to:  Tools > Universes
    Click 'Refresh'
    Select and 'Import' your universe
    Next, go to toolbar menu:  Data >  Edit Data Provider
    In Query Panel, click 'Run' to regenerate the Query and interrogate the updated universe.
    Only after following these actions will the .unv ammendments be visible in the report.
    Here is second :
    Symptom
    Changes to object made for the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
    Desktop Intelligence (Deski) Report still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
    Row level Restriction is not applied correctly in InfoView(View Mode) when 'Allow selection of multiple Contexts' checked in the Universe Designer
    Environment
    BusinessObjects Enterprise XI 3.1 Service Pack 2 Fix Pack 2.6
    Reproducing the Issue
    Changes to object made in the Universe is not affected in InfoView(View mode) when 'Allow selection of multiple Contexts' is checked in Universe
    1. Log in to Designer
    i) Import Island Resort Marketing
    ii) Go to Universe Parameter >> SQL
    ii)Uncheck Allow Selection of Multiple Context
    2. Create a new Desktop Intelligence(Deski) Report based on Island Resort Marketing
    i) Drag the object Country in the Result's Pane
    ii) Save and Export the report to the repository.
    3. In Designer Change the Object Country under Resort from Resort_Country.country to
    i) Resort_Country.country+'ddd'
    Note: Uncheck Allow Selection of Multiple Context
    ii) Save and Export the Universe
    4. Log in to InfoView
    i) View the report
    ii) Refresh the report
    iii) Changes to the object taken place i.e Country is concatenated with ddd
    5. In the Universe Designer, change the Object Country under Resort from Resort_Country.country to
    i) Resort_Country.country+'eee'
    Note: Check Allow Selection of Multiple Context
    ii) Save and Export the Universe
    6. Log out from InfoView and login again
    i) View the report
    ii) Refresh the report
    iii) Changes not taken place. Shows only Country instead of Country concatenated with eee.
    Row level Restriction is not applied correctly in InfoView(view Mode) when 'Allow selection of multiple Contexts' checked for the Universe.
    Import efashion Universe 
    Drag the Outlet_Lookup table into the objects pane on the left hand side
    Create Row Level Restriction on the state field of Outlet_Lookup table as Outlet_Lookup.State=(u2018Texasu2019) 
    Apply the restriction to Administrator
    Save and Export the Universe. Note: Uncheck Allow Selection of Multiple Context in Universe Parameter>>SQL
    Log in to Desktop Intelligence (Deski) as administrator with Enterprise Authentication
    Create a new Deski report
    Drag the object state from the Outlet_Lookup table to the Results pane 
    Observed that the administrator is able to see only Texas which is expected behavior
    Save and export the report
    Log in to Infoview as Administrator
    View the report. Refresh the report
    Observed that the administrator is able to see only Texas which is expected behavior
    Log in to Infoview as any user say Test User
    View the report. Refresh the report
    Observed that Test User is able to see all the states which is expected behavior
    In the Universe Designer, Check Allow Selection of Multiple Context in Universe Parameter>>SQL for efashion Universe
    Save and export the Universe
    Log in to Infoview as Test user
    View the report
    Refresh the Report
    TestUser is  able to see only Texas which mean that the restriction is applied to Test User also
    Cause
    This is by Design as the  'Allow selection of multiple Contexts' forces selection of the context, which is not possible in Infoview, so that in Infoview it is assumed the Context is already selected and no SQL regeneration is required.
    Resolution
    Problem Description: Changes to object made in the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
    Explanation:
    If we modify an object and selects also the option 'Allow selection of multiple Contexts', it means that potentially there is more than one SQL that can be generated with the use of that object. Hence if a report is created in Deski, run and exported to enterprise, that means, one particular context (SQL) has been selected.
    If you then update one or more of the objects again, the SQL will have to be regenerated in Deski for the right context to be selected for that particular report.
    Therefore, if this option is used, for the objects to be updated, the SQL of the report will have to be regenerated in Deski, run and export it back to repository, then refresh the report in InfoView.
    For Deski reports viewed in InfoView, it is not possible to evaluate the context on refresh. The report will always use the context stored with the report and same for the SQL. Therefore the Deski report will need to be imported locally, refresh it and then export it back to repository for the changes to take place.
    Problem description: Desktop Intelligence (Deski) still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
    Explanation:
    The option 'Allow selection of Multiple Contexts' in Designer is not to disable the prompt. It will prompt you to select context if the object used is associated with context. The option is just to allow Deski to select multiple contexts at a time if in case the object used is associated with multiple contexts and accordingly generates the SQL.
    However if we uncheck the option even if there are multiple contexts associated with the object used, it will allow selection of only one context at a time.
    Problem Description: Issue with Row level Restriction when refreshed from InfoView with 'Allow selection of multiple Contexts' checked for the Universe.
    Explanation:
    We first have to regenerate the SQL in Deski, then export it to repository and refresh from InfoView for the changes to take place correctly. The explanation above applies.

  • Theme changes not reflecting in Consumer EP7.02 portal.

    Hi Experts,
    We are in CE7.2(Producer) fedarated with Enterprise portal 7.02. We are using custom theme and modified the font color for disabled field property from #999(grey) to #000000(black) in consumer portal. The changes are not reflecting in consumer portal. We have tried modifying the Master head and its reflecting as expecting. Even after that we cleared the cache and did restart both the servers as well. Still the changes are not reflecting.
    Please provide your inputs, it will be great helpful for us.
    With Regards,
    Ramesh G.

    Hi Ramesh,
    Please copy the custom theme folder and paste it in the following path in the consumer server:
    <Drive_name>:\sap\<SID>\JC<Instance_Number>\j2ee\cluster\server<Node_Number>\temp\webdynpro\web\sap.com\tcwddispwda\global\SSR\themes
    Thanks
    Gautam Singh

  • IMG HPF Area Page Customizing not reflecting in Portal

    Hi,
    I'm near to smashing my keyboard, but before I do so, maybe someone is able to help me:
    In IMG Homepage Framework I've got a custom Area Page which has a Headline Area Description and an Area Description Longtext. I need to change the contents of these two fields. If I change the Headline Area Description, it reflects in Portal right after relogging. If I change the Area Description Longtext it still shows the old Area Description in portal. This is not supposed to happen and it never happened before.
    Backend System: NW 7.01 Stack 8 ECC 6.00 EHP4 SP36
    Portal Server: NW 7.01 Stack 9, All respective XSS Java Components and Business Packages Updated to EHP equivalents
    I direly hope this is not due to the difference in Stacks ( Backend 8 - Frontend 9 ).
    Portal cache has been cleared and portal has been restartet, without any effect.
    Any ideas?
    regards, Lukas

    I haven't used external entries. From the Document you provided however, I take it, if I used one, I could just override the "bugged" Long description with an html file.
    UPDATE/EDIT: When I create a HTML File in KM Content and pack it into a Ressource for external Linking in the Area Page. It does reflect, but looks horrible. If I remove the external entry again and keep the description long field blank. The old text reappears in ESS...
    I looked through all the relevant tables in SE11/SE16 the entries in IMG do reflect; just not in ESS.
    Aside from this workaround. Any other ideas why my problem occurs?
    regards, Lukas
    Edited by: Lukas Weigelt on Aug 17, 2011 11:39 AM

  • Modified WAD report does not reflect in Production even after transport

    Dear Friends,
    We are using BI7.00 with Nw2004S. One of my report had been created in WAD (Web application designer). I have transported this report to production from Quality as in our case the Quality client is the base client for WAD report development. I collected the objects from the transport connection in RSA1 and transported the request.
    After the above since user wanted changes in the report,i again modified the report and checked. Everything was fine in my Quality client but when i transported it to production, the new modifications are not appearing.
    I have done the transport more than 2 times but still not changes is shown.
    Experts kindly provide your helping hand.
    Regards,
    M.M

    Dear Arun,
    Thank you for your feedback. As per your guideline we executed the program RS_TEMPLATE_MAINTAIN_70 in both QAS and PRD clients and found that the html codes are same. Moreover we are still not able to get the modified web items in our PRD clients. All the caches were deleted and still no improvement. Following are the other activities and obeservations done by us.
    1) Deleted the web item again in QAS client, Saved the report, recreated the web item, saved and then collected it in the request and transported and found that it is still not reflecting.
    2) In our observation, we find that the objects are found collected in the transport request and the task of the transport request contains no element. We do not know whether it is right.
    3) Missing of authorisation was also checked and found that it is not the culprit.
    In the above context we are still groping in the dark. Kindly provide your expert comments.
    Regards,
    M.M

  • Language Not reflecting in portal sub areas

    Hi all,
    We have installed languages in back end ECC6.0 (SP14,Enhancement Package2). In UME we have assigned the default language to. But still its not reflecting fully in portal page. It means for example I have assigned a french language to the particular user in UME.After doing this activity, i logged in to the portal then the french language is reflecting in the areas but not in subareas(data from ECC ).The data are displaying in English only.
    So, i think i need to maintain values are parameters for the translation has to be taken..
    FYI: Its ESS module and i changed my setting also in browser
    Anyone helping me in this it will be really helpful
    Regards
    Vijay kumar
    Edited by: vijay kumar gopal on Jun 6, 2008 1:26 PM

    Is the french language installed and maintained in your backend system? If yes, did you configure the browser so that is uses FR-fr as language first before using EN?
    Markus

  • PO changes not reflecting in the SAP R/3 system in Extended classsic

    Hi Guys,
    I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box  of Item deletion is updated. which means PO line item is deleted.
    Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
    Please help me.
    Regards
    Srujank

    Hi
      Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
    and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
    Then you should not face this problem. Let me know if you require more information.
    regards
    ravi

Maybe you are looking for