Report Column Heading Alignment - Center Not Working Correctly

I am using Apex 2.1 (XE) and now have an application with about 30 pages. I've noticed that some of my reports which have columns with a heading alignment of "center" are not always centering if they have columns that align to the left or right included before them. I looked at the generated HTML and it shows that align="LEFT" or align="RIGHT" is being generated in the source even when the column heading is set to center in the designer. It appears that if a field higher on the list says to align the column heading left or right, then that is what the following columns are going to do also if they are set to center. So column heading left and right works great, and center works only if all the columns are set to center.
My question: Is this a known bug? Is it something that can be scheduled for a fix at some point in the future?
Luckily the column data itself obeys the column alignment, so this is strictly a cosmetic problem with the column headings.
Thanks,
Jim

Hello,
What theme are you using?
Try setting them with a css decalration. Instead of align="right" put this is in the heading attribute
style="text-align:right;" or style="text-align:left;"
Carl

Similar Messages

Table css column-header text color not working

When setting
-fx-text-fill: red;
in a css table, it does not change the header to tex to red. Is there another value? .table-view .column-header {

You have to override the following from the caspian.css:
.table-view .column-header {
    -fx-text-fill: -fx-selection-bar-text;
    /* TODO: for some reason, this doesn't scale. */
    -fx-font-size: 1.083333em; /* 13pt - 1 more than the default font */
    -fx-size: 25;
    -fx-border-style: solid;
    -fx-border-color:
          Inner border: we have different colours along the top, right, bottom and left.
          Refer to RT-12298 for the spec.
        derive(-fx-base, 80%)
        linear-gradient(to bottom, derive(-fx-base,80%) 20%, derive(-fx-base,-10%) 90%)
        derive(-fx-base, 10%)
        linear-gradient(to bottom, derive(-fx-base,80%) 20%, derive(-fx-base,-10%) 90%),
        /* Outer border: */
        transparent -fx-table-header-border-color -fx-table-header-border-color transparent;
    -fx-border-insets: 0 1 1 0, 0 0 0 0;
    -fx-border-width: 0.083333em, 0.083333em;
.table-view .column-header-background {
    -fx-background-color: -fx-body-color;
    -fx-padding: 0;
}

Recovery Media Center not working correctly on C655D-S5200 purchased from retailer yesterday

I came to the Forum to see if anyone else is having the Create Recovery disk option....... I wish I had read this as well as other topics before I bought this. And this will be the 3rd time I have typed this out because of Forum Registration issues......am I ?
(3rd time) I am trying to create Recovery Media. The booklet that came with the computer and the Online User's Manual and the information stored on the computer all state something different about the Save media option. My issue is:
-I start the wizard
-Wizard allows the option of saving to USB (10 gb) or DVD (4)
-I choose USB and insert 16 gb flash drive into USB hub
-Wizard starts, formats flash drive, then starts
-After half an hour, the wizard stops and the two bars (Copyng Data and Overall Process) do not one more dot for at least half an hour and then I terminate.
-Information indicates that the total copying process should take only 1/2 hour.

I'm not a tech support agent, but to me it sounds you're not doing anything wrong. If it was me, I'd wait longer, say, a couple hours.
If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TAB delimited</Name>
       </OverrideNames>
       <Configuration>
           <DeviceInfo>
               <FieldDelimiter xml:space="preserve">	</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <UseFormattedValues>False</UseFormattedValues>
               <NoHeader>False</NoHeader>
               <FileExtension>TXT</FileExtension>
           </DeviceInfo>
       </Configuration>
      </Extension>

Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

11.1.1.5 - Column Heading Alignment not working

I've created a simple one-column analysis, and I'm viewing the Table. I'd like to center the column header (currently it is left-aligned).
In the Layout section for the Table view, I'm selecting Format Headings from the column's option icon.
Changing the font characteristics works fine. Changing the cell background color works. However, changing the Horizontal Alignment and Vertical Alignment have no effect.
I've also tried this on the on the Column Properties ... Column Format for the column, selecting the formatting icon next to the Column Heading field. No luck there either.
Where is the correct place to change the alignment for column headings?

hi
try this....
1. select criteria and go to column properties
2.Select Column Format(second tab) ->Column Heading ->format ->set the center for cell horizontal and vertical.
if you selected sort for this column, the center alignment is not working.
Thanks
Edited by: Kavitha on Jul 1, 2011 4:15 PM

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Sound blaster not working correctly?

Sound blaster not working correctly #I have a 64 bit, windows vista system.
A Logitech Z-5500 Digital speaker system (one woofer, center speaker, left, right, rear right, left rear speakers, and a seperate control head).
I have an X-fi gamer sound card.
I recently formatted my hard dri've and reinstalled everything. Trying to make everything happy again. Here is my problem:
When I use the Creative Console Launcher (CCL), my front right speaker tests fine. My front left speaker comes out of the woofer. And no other speakers will test at all. It does this in all modes (2., 4., 5. and 7.).
When I play some music, it is coming out of all of the speakers. But it won't test properly in the CCL. So, do I have an issue, does what the CCL is doing not matter, or something else In some games, hearing what direction stuff is coming from matters, so if it is sending sounds to the wrong speakers, then I need to figure out a fix.....hence my post.
Thanks for any help you can give, Robert

Well, as the official documatation states, the Archlinux is for more or less advanced users, and if you're not one, we will make you one
First of all, if you compiled your sound as modules, try putting this in your rc.local:
stat_busy "Activating Sound"
/sbin/modprobe your_sound_module
/sbin/modprobe other_sound_module
/sbin/modprobe yet_other_sound_module
stat_done
Change your_sound_module stuff to your module names as you configured in the kernel, of course.
Second: in order to have two or more sound apps working at the same time, you need some kind of sound server. For default one (esd), uncomment esd in /etc/rc.local (remove ! before it) . After that, you'll have to configure your sound apps to use esd. I know that this is extremely easy with xmms and xine, dunno about others. I do not use esd, because my favorite games (quake3 and half-life) require direct access to /dev/dsp.
And remember: nobody blames for asking 8)

I downloaded a book in iBooks store.The e-book is not working correct.

I downloaded a book in iBooks store. Titel: Zeitenzauber from Eva Völler. The e-book is not working correct. There are always errors on most of the pages: error at column, etc. I already downloaded the book again. But still the same problem. Any idea what I can do?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

System Update not working correctly

Hi forum,
System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
1: Not detecting old versions
SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
2: Not installing a suggested update
Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
Regards
AH_DE

Dear Herik,
thanks for your answer.
I checked the log file and found thousands of entries. Here are the lines related to "Fix for ...".
Info    2010-02-03 , 08:40:37
          bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
          Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
Info    2010-02-03 , 08:40:43
          bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
          Message: Candidate list:
Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
Info    2010-02-03 , 08:40:57
          bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
          Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
Info    2010-02-03 , 08:40:57
          bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
          Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
Info    2010-02-03 , 08:40:57
          bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
          Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
ADDITIONAL ENTRIES
Info    2010-02-03 , 08:40:57
          bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
          Message: System updated:
          Installed=0
          Not Installed=Tvsu.Beans.Update[]
          Deferred=0
          Download Failed=0
          Hidden=0
Severe          2010-02-03 , 08:41:17
          bei Tvsu.Sdk.SuSdk.ShutDownApplication()
          Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
Since I'm a normal user only, I can't interprete this information. Do you know what to do?
Kind Regards
AH_DE

Is prompted filter not working correctly with calculated items

Hello,
I am working on OBIEE 11.1.1.3 and having problem problem linking 2 analisys with action link
The test case is:
I have 2 attribute columns on a dimension
1. Conto 1 Code
2. Conto 1 Dsc (in RPD i set up the property Descritor ID of -> Conto 1 Code)
3. Conto 2 Code
4. Conto 2 Dsc (in RPD i set up the property Descritor ID of -> Conto 2 Code)
5. Conto Detail
and 1 measure on the fact table
1. Revenue (defined on RPD as simple sum)
On presentation layer i have the analisys:
1.
The First one using as Criteria: Conto 1 Dsc | Conto 2 Dsc | Revenue
The layout is a table with sub-total on Conto 1 Dsc
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 1 Dsc | Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 1 Code (is prompted) | Conto 2 Code (is prompted)
This pair of analisys are working fine.
Then i created a second pair of analisys as:
1.
Criteria: Conto 2 Dsc | Revenue
Using Calculated group \ Items i created a numerous set of sub-totals
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 2 Code (is prompted)
This pair of analisys are not working correctly. When i drill from first analisys to second one the Conto 2 Code filter is not used.
Replacing in the second analisys Conto 2 Code (is prompted) with Conto 2 Dsc (is prompted) a filter is being generated on the drill but it's using the Conto 2 Code value and the analisys ends with no results.
Thanks,
Jonni

Try adding Conto 2 code to the first analysis and keep the filter on the second analysis as Conto 2 code is prompted.
-Amith.

Program not working correctly-Help!

class Sort
     /* method takes an array of integers as an input,
     * and returns a copy with the element values sorted
     * by select method.
     int[] selectSort(int[] input)
          /*declare variables to be used in array */
          int x, y, max, temp;
          int[] select = new int[input.length];
          /*This loop reads the entire array */
          for(x = input.length - 1; x>0; x--)
               max = 0;
               /*This loop checks to see if any number is
               lower possible greatest number /
               for(y = 0; y <= x; y++)
               {//Returns number if lowest number
                    if(input[y] > input[max])
                         max = y;
                    }//end of if statement
               }//end of inner loop
               /*Switches the values */
                    temp = input[x];
                    select[x] = input[max];
                    select[max] = temp;
          }//end of outer loop
          return select;
     } //end of selectSort()
     /* method takes an array of integers as an input,
     * and returns a copy with the element values sorted
     * by bubble method.
     int[] bubbleSort(int[] input)
          int[] bubble = new int[input.length];
          for (int x = 1; x < input.length; x++)
               for (int y = 0; y < input.length - 1; y++)
                    if (input[y] > input[y+1])
                         int temp = input[y];
                         bubble[y] = input[y+1];
                         bubble[y+1] = temp;
          return bubble;
     } //end of bubbleSort
**********************Test Class**********************
class TestSort
     public static void main(String[] args)
          /* count variable used as loop counter when
          * result table display is generated
          int count;
          /* variable for object of class Sort */
          Sort x;
          /* create object of class GroupEx2 */
          x = new Sort();
          /* create a source array of integer elements */
int[] y = new int[5];
/* assign values to array elements to be sorted     */
          y[0] = 8;
          y[1] = 5;
          y[2] = 3;
          y[3] = 9;
          y[4] = 1;
          /* create variable for target of select sort array */
          int[] ss;
          /* create variable for target bubble sort array */
          int[] bs;
          /* call method to return an array with element values select sorted*/
          ss = x.selectSort(y);
          /* call method to return an array with element values bubble sorted*/
          bs = x.bubbleSort(y);
          /* display original and sorted arrays in three columns*/
          System.out.print("Input Array" + "\t");
          System.out.print("Select Sort" + "\t");
          System.out.println("Bubble Sort");
          for (count = 0; count < y.length; count++)
               /* Column 1: original array */
               System.out.print("input[" + count + "] = " + y[count]);
               /* tab between columns 1 and 2 */
               System.out.print("\t");
               /* Column 2: select sorted array */
               System.out.print("select[" + count + "] = " + ss[count]);
               /* tab between columns */
               System.out.print("\t");
               /* Column 3: bubble sorted array */
               System.out.println("bubble[" + count + "] = " + bs[count]);
          } // end of display for loop
     } // end of main()
} // end of class TestSort

Thanks for the Bash! I'm surprised you had the time
for it.Go back and look at your original post. A whole bunch of code, and the only description of the problem is "not working correctly." Do you honestly think that's a reasonable way to ask for help? Do you go to the doctor and say, "I'm sick" and then just wait for him to cure you? Do you take your care to the mechanic and say only, "It's broke"?
Look, this is your problem and it's your responsibility to fix it. There are people here who are happy to help you, but it's up to you to provide a reasonable statement of what's wrong, what you've tried, what you don't understand. For instance:
Does it compile? If not, post the complete error message.
Does it run, but throw an exception? If so, post the stack trace.
Does it not throw an exception, but not behave the way you expect? Then describe the expected beavior and the observed behavior.
Do you really need to be told this stuff? It seems like common sense that when you're asking people to spend their time helping you, you should give them the information they need to be able to do so.

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Why is Docs to go allowed to be sold as being able to function on IPAD3. The columns were blleding into the next column header and could not be accessed. Going into one cell gave me the forumula 4 cells down. Absolute rubbish. Moved to Quick Office PRO HD

I purchased Docs to GO Premium as it was suppose to work on IPAD 3. On loading a spreadsheet the columns under the header columns (ABC etc) started to blled into the next column. It does not work on IPad 3.
I swithced to Quick Office Pro HD. Absolutely fantastic App. I would love to get my money back for Docs to Go Prem (Rubbish)

Send your complaints to the developer. This is not the venue for them.

Report Column Heading Alignment - Center Not Working Correctly

Similar Messages

Maybe you are looking for