Report Comments visible in Windows Explorer?

Is there a way to view the "Report Comments" special field in Windows 7 Pro Explorer? We would like to track the version number of a report using this field, and it would be nice to see which version of the report is in a folder. Thanks!

Depends the version of CR. Look in the special Fields area for the function

Similar Messages

IPod nano: Connected to the iTunes on Mac OK but not visible in iTunes on Windows. But is visible in Windows explorer as a disc.

Hi,
I have an issue with my iPod nano. I first connected it to the iTunes on Mac and synced perfectly, but now I am trying to connect it to the iTunes in Windows but iTunes can't see it. Even althought the iPod is visible in Windows explorer so it is connected to the PC. Don't know what to do next.

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Cheers,
Patrick

DLL file in Windows\system32 folder cannot be found by regsvr32 even though the file is visible in Windows Explorer

I am trying to register a DLL on a Windows 7 ultimate, 64-bit computer (all SPs installed).
The file resides in c:\windows\system32.
The DLL file is clearly visible in Windows Explorer. The file is not hidden. It is not marked Read-Only. All users can access it.
When I run regsvr32 it responds that the file cannot be found. It says to check the path.
The same thing happens when I run from the command prompt if c:\windows\system32.
When I try to open using Dependency Walker, it also cannot find the file.
Does anybody know what's happening here? I feel like I'm in the Twilight Zone.
Thanks.
Murray
M Whipps

Hi,
You could run SFC command to see if you fix any corrupted system file.
If this cannot help, try to replace this file with a known good copy.
For the detailed steps, you could follow the link below:
http://support.microsoft.com/kb/929833?wa=wsignin1.0#method3
Alex Zhao
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Alex Zhao
TechNet Community Support

Tags from 'Comments' field in Windows Explorer don't show up in iTunes

I have thousand of files where I allready put tags directly in the comments field in the files proberties in Windows Explorer, but the tags don't show up in iTunes comments field?
I can then manually put tags directly in iTunes comments field and they will not show up in the proberties of the files in Windown Explorer!
So I ask, why on earth aren't those fields (in iTunes and in Windows Explorer) compatible, when all other fields (for example name, artist, year) are compatible?

Okay, thanks for replies and for your time, but the problem continues.
First: I've ripped CD's in different ways (before starting to use iTunes). I've used Nero, Windows Media Player, Lame and imported mp3 files directly from the internet. Some files have been through Flash Renamer and TigoTago. After importing the files I've tagged them with comments and other stuff directly in Windows Explorer. And then I decided to use iTunes because of buying iPods and playing music through AirPort Express.
What I've tried to right now:
I've tried to check files with MP3Val, but it said the files were OK.
Then I tried - with another laptop - to install I new iTunes program (English language to be sure and there after I imported/ripped a new CD using iTunes to import. Before importing I put a tag in the Comments field in iTunes and it never showed up in Windows Explorer Comment field. I also tried after that to put tags directly in Windows Explorer Comment field and add the files once again to iTunes library, but again, no comments in iTunes. Also again put tags in iTunes, but no tags in Windows Explorer.
Then I did more or less the same using Realplayer to import the CD, but with the same negative results.
*Then I went back to my old laptop, imported a CD using iTunes and then tagged the comment field in Windows Explorer and suddenly I got comments in iTunes! But the comments look like this: "00000000 00000210 000008E8 0000000000775908 00000000 0040E5E1 00000000 00000000 00000000 00000000 00000000 00000000".*
I don't know what to do with this?
And apparently, it's only when importing new files using iTunes to rip the CD, that this happens. Otherwise, nothing happens at all.

HT1329 iPod classic disc use - only some music visible in Windows Explorer!?

I followed above steps but then realized that it has only copied some of my music over. When I look at the music folder on the ipod in Windows Explorer, I only see some of the artists/albums/songs that actually on the iPod! I can see that a certain song is on my iPod and can play on my iPod without a problem, but it is not visible in Windows Explorer, hence it doesn't get copied over.
I can find the songs in the hidden ipod_content file on my ipod, but if I copy a file over to iTunes it gets added as a new file (which works), but the 'old' non-functional file is still there. We are talking hundreds of songs so doing it this way would mean hours and hours of locating manually and adding to playlists plus deleting the 'old' file in iTunes.
Is there a way to copy everything over from the ipod_content file and getting iTunes to match that with the missing songs like it did with the songs that were copied over the first time around?

Hmm.
Ideally you would have copied the entire iTunes folder from the old computer to the new one, having first consolidated your library to make sure that all the media content was inside the iTunes folder. If it isn't too late then go back and do it again.
Otherwise see Recover your iTunes library from your iPod or iOS device. If you have your preserved library file what might work is to manually recover the media files into a new iTunes library with the iLounge article near the end, get iTunes to organize the media. Then cut and paste the new media folder onto the one you had previously so that no duplicate files are created. With luck your original library can then find the recovered files.
tt2

Phone not visible in Windows Explorer - post 10.3 upgrade

I installed 10.3 on my Q10 no problem, saw the Blend icon and decided to install (having used it on the work Passports) so a couple of things....
1. Blend now downloaded - but wants to install on an F:drive - which would be the Q10.
2. When connected via USB (or wifi) the Q10 is not visible in Windows Explorer (it was fine in 10.2)
3. Can see the drivers begin to install, but then it rolls back and a 'Install failed, cannot find F:drive' appears.
4. Is Blend intended for use on the Q10.
Anyone got any ideas I can try?
Solved!
Go to Solution.

Found it, you have to go into Settings > Networks and Connections > Connection Services > USB and slide the USB Mass Storage Mode to the on position. It will then show as an ext. hdd in Windows Explorer.

My CD rom is no longer visible in windows explorer in my computer.

Please could someone help with the following query.
My CD rom is no longer visible in windows explorer in my computer. I have tried going to new hardware in control panel and couldn't find it.
I have run the toshiba diags and it finds it and says its fine.
Any advice on resolving this issue would be very much appreciated.
Thanks B

Hi
You need to remove the upper and lower filters from registry key.
First of all remove the CD/DVD drive from the device manager.
Then go to registry and remove upper and lower filter from this key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
After that reboot the notebook.
For details check this:
http://support.microsoft.com/kb/270008/en-us

Photoshop CS2 thumbnails not visible in Windows Explorer

I have Photoshop CS2 running on XP Pro, and all of the thumbnail images for my PSD files show up as black squares in Windows Explorer. The files I created in PS6 still show their thumbnail images, but once I load them into CS2 and save them, they're gone. Any ideas as to what's causing this?

There was a DLL called psicon.dll provided with early versions of Photoshop that made .psd thumbnails visible in the 32 bit Windows Explorer. I don't know whether later versions of .psd files might be incompatible.
For modern systems, especially 64 bit systems, there is no Adobe-supplied icon shell extension - one has to go to commercial (but inexpensive) software from one of a couple of companies out there who provide the proper codec:
Mystic Thumbs: http://mysticcoder.net/mysticthumbs.html
Ardfry PSD Codec: http://www.ardfry.com/psd-codec/
Of course, if you investigate these double check to be sure the software will work on your system.
Before paying for anything you might also check to see if you have the Maximize Compatibility setting checked in Edit - Preferences - File Handling.
Hope this helps.
-Noel

Problem: BB 8700g - connected via USB to my PC but not visible on Windows Explorer

when I connect my 8700 g (OS 4.5 / DTM 5.01) to my PC via USB and open the Windows explorer I exspected to see there the device , I don't!!!
I would like to "drag and drop" *.mpg-or *. jpg-files from my PC to the BB device (such as ring tones or photos)
Other smart phones are recognized , I can see them as drive E or F etc, and if I click on e.g. E, I see the contents of E and am thus in a position to transfer the files to the place I want.
So what have I got to do in order to make my device visible and ready for the work I described?
I hope I made myself understood and would appreciate you helping me solve this problem, thank you

Hi!
Here is the list of troubleshooting atricles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

NAS not visible in Windows Explorer!

I seem to be the most stupid person here but why is my newly installed NAS (Buffalo LS220D) not visible from the Windows Explorer?

Hi,
First, please make sure that you have setup the NAS corretly, you can refer to the user manual I found on the
Buffalo offical website
http://www.buffalotech.com/products/network-storage/home-and-small-office/linkstation-220
Meanwhile, please mak sure to turn on network discovery under Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings
Make sure that"client for microsoft network" is installed under the network connection\properties
If issue persists, please temporarily turn off firewall and anti-virus porgram since incorrect setting can block the connection.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Free disk space is reported as "working" by Windows Explorer for shares crossing 92TB

Hello,
We have shared a folder from Unix box using Samba and the disk space is about 92.5TB. After mapping the share on Windows 7 client, if we view the properties of the mapped share, the free space and the capacity are reported as "working". On the other
hand, if the disk space is about 90.5TB, free space and capacity are reported correctly in bytes.
Also, using the cmd prompt, if we execute "dir" command on the mapped share drive, the free space is correctly reported in bytes both in case of 90.5TB and 92.5TB.
Can you please let me know if there is a limitation with Windows explorer in displaying disk capacity if the disk size is more than 92TB?
Thanks,
Shilpa

Hi,
We would do something test about this result, and then update this thread as soon as possible.
Alex Zhao
TechNet Community Support

Iphone 4s with os 7.1.1 no longer visible in windows explorer

I have an iPhone 4s with OS 7.1.1 and can no longer see it in windows explorer - Windows 7

Hello garth17,
If your iPhone isn't appearing in iTunes, please see the article linked below.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Should the device appear in iTunes, but not in Windows Explorer, the next article provides troubleshooting that you may find helpful.
iOS: Unable to import photos to computer
http://support.apple.com/kb/TS3195
Cheers,
Allen

Lightroom 1.2 not visible in Windows Explorer

I had Lightroom 1.1. and had no trouble assigning Lightoom as the program to open .jpgs. Since I've upgraded to 1.2 Lightroom does not appear as a choice in the file type selection list in Windows Explorer. When I browse to the Lightroom .exe file location in the program sub-directory it doesn't get added to the list.
I reinstalled the upgrade, stopped all spyware and virus programs but still not working.
Any ideas anybody on how I can fix this??
I'm on Windows XP Professional, IBM laptop.

Same problem here.

Ifs 'o' drive not visible in windows explorer(WinXP)

Hi,
The 'o' drive does not appear in the windows explorer. I have installed version 2.0.1 on windows xp with oracle 9i.I have checked the node log, it says that the ntfs server has started successfully, but I find the drive anywhere.
Any ideas?
Thanks

Kashif,
9iFS 9.0.1 has not been certified with XP. Pleasae try to use a certified Windows client and let me know if you still have the problem.
Hanne.

Substituted Drive Not Always Visible in Windows Explorer

We have a 2008 server with terminal services enabled and the login script is used to subst I: to a folder on a local hard disk eg. SUBST I: D:\FOLDER
When the domain administrator is logged in via an RDP session they have an entry for I: shown in windows explorer. If a user logs in while the domain administrator is logged in they also see I: in explorer but if a user logs in when the administrator is not logged in they don't. Attempts to access I: from the command line are always successful and the substitution can be seen by typing SUBST at the command line.
Any idea what's going on?

Steve,
I would suggest that in your case it is eather a bug or a coincidence with other applications or permission sets.
I have had the same setup in couple of environments and I have not had such a problem. The subst was
excetud from logon scripts and it worked.
I would suggest you to use Process Monitor from Sysinternals:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
and run it when the users have the issue of not being able to access the I: drive.
Look for regestry and fily system access denied entier and you will come to the resolution.
I guess for someone else it would be difficult to reproduce this issue.
Citrix Technology Professional, PubForum.net Founder, LinkedIn, TS Training in Europe! Love Microsoft &its people to bits!

Report Comments visible in Windows Explorer?

Similar Messages

Maybe you are looking for