Report "Completely delivered PO"

Hello experts,
I'm looking for a report giving me all completely delivered purchase orders.
I need this report on header level (based on the header status information).
Do you know such a report or the name of the respective field so I can make this report myself?
Thanks, Sebastian

Hi,
Go to ME2n, here go to Dynamic Selection(Shift + F4)
Here go to Header Data .....Here there is Delivery Complete Indicator
Put X for Yes and Execute the report and in selection Parameter put WE101 and
Scope of list Put "ALV"
Hope Help U !
Regards,
Pardeep Malik

Similar Messages

  • Requirement in MRP even after Sales order completely delivered/cleared

    I see a sales order in md04 even after that order is already cleared completely delivered
    I have checked the pGI quantity in order and document flow. everything matches and status is completed/cleared.
    I also ran SDRQCR21 in se38 with data transfer checked. Still I am unable to delete that fake order from md04.
    any help is appreciated.

    Hello ,
    Have you checked & followed all instructions  in SAP note 207942.
    "Generally you can solve these problems with report SDRQCR21from Note 25444. If not, these kinds of problems must be processed further in SD-BF-AC.
    However, often the problem is also caused by the fact that
    no requirements are generated at first or the generated requirements are only displayed but are not included in MRP calculation
    or vice versa
    due to the Customizing settings requirements are stored although this is not wanted from the business view. "
    This is a release independent SAP note. so it applies to ECC6.0 as well.
    Hope this helps you resolve your issue.
    Thanks,
    Ram

  • Report "completed with warning "   APP-FND-00500: AFPPRN received a return

    hi ,
    i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_ORG_ID='200'
    P_PO_NO_FROM='9068'
    P_PO_NO_TO='9068'
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.US7ASCII
    Report Builder: Release 6.0.8.25.0 - Production on Fri Dec 2 16:56:40 2011
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter Username:
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 6098208      
    Number of copies : 1      
    Printer : wkwcomm
    wkwcomm: service-unavailable
    APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
    Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
    Action: Review your concurrent request log file for more detailed information.
    Finished executing request completion options.

    Please post the details of the application release, database version and OS.
    i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?Is this a custom or seeded concurrent program?
    Is the issue with this report only?
    Is this output from the printer that the report complete successfully with warning?
    Do you get an output file?
    wkwcomm: service-unavailableIs wkwcomm the printer name (queue name)?
    APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1Apps Print Requests Fail with lp: unable to print file: client-error-not-found [ID 359890.1]
    https://forums.oracle.com/forums/search.jspa?threadID=&q=APP-FND-00500&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

  • Report Completion date and Report start date in BI Publisher

    Guys
    We have a requirement to get the Report Completion date and start date without Scheduling the report. Can any one give me an idea to get in the BIP Reports
    Regards

    What is the requirement ?
    When the user run report from BIP EE, you want to display how long the report run ?
    or
    Where you want to display these info >?
    If you expecting these info, on click of viewbutton then i dont think it is possible, unless you write the query to fetch the time and in the template processing, subtract that from the current sys-time to get the time it took to run.
    if you can schedule then
    Simplest would be is , taking these info from the tables, directly for the report you are running.
    or
    use Public WS provided by BIP to get the report info
    but in order to get these, first of all the reports should be run in scheduled mode.
    if you don't want the report to be scheduled then, i don't think, you can get these kind of report completion status info.
    otherwise , you can run the query by yourself to get the data and the time it took to complete from database and do some sort of custom calculation by urself

  • Scheduling a Report to Deliver As an Email Attachment

    Hi,
    I want to schedule a Report to Deliver As an Email Attachment. But I am getting the below error.
    oracle.apps.xdo.service.delivery.DeliveryException: oracle.apps.xdo.delivery.DeliveryException: Exception reading response;
    nested exception is:
         java.net.SocketException: Connection reset
         at oracle.apps.xdo.service.delivery.impl.DeliveryServiceImpl.deliverToEmail(DeliveryServiceImpl.java:235)
         at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1215)
         at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:493)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
    In the below link its given to setup the email server (ArGoSoft Mail Server Freeware)
    http://www.oracle.com/technology/obe/obe_bi/bipub/advance/advance.htm
    But I did not do the steps mentioned in the above link. Since I have email server configured on my system.
    I am using the proper Host name and Port. Can you please suggest why I am getting this error.
    Thanks,
    Shiva

    Not really the best way to go.  You'll waste a lot of time and it may not work for your receiver.  Most email hosts have file size limits that make emailing video files a problem.  Better choice is upload you video to YouTube or some other file sharing site then email a link.

  • Complete Deliv and Mixed Item cat and Availability Check

    Hi Gurus,
    Not sure if this is problem is new, I have searched with no clues.
    A SO has 2 item categories. ZTAN, ZTAS. ZTAN is stock item, ZTAS is back to back item where a PO will be created. Same material. There is a GR processing time of 10 days.
    SO created on 12.05.2014.
    Item 1: MatA     First Date: 15.05.2014     Item Cat: ZTAN Qty: 500     Confirmed Date = 15.05.2014 (Stock Available)
    Item 2: MatA     First Date: 15.05.2014     Item Cat: ZTAS Qty: 1000     Confirmed Date = 29.05.2014 (Today + 10 GR Process)
    Then tick Complete Deliv. Indicator in SO overview screen.
    Item 1: MatA     First Date: 15.05.2014     Item Cat: ZTAN Qty: 500     Confirmed Date = 29.05.2014
    Item 2: MatA     First Date: 15.05.2014     Item Cat: ZTAS Qty: 1000     Confirmed Date = 29.05.2014
    Save SO.
    PO 1st AB line for SO item 2: Confirmed Date = 15.07.2014 results in Both SO item confirmed date = 15.07.2014
    PO 2nd AB line for SO item 2: Confirmed Date = 15.06.2014 results in Both SO Item confirmed date = 15.07.2014.
    You see the problem is after 2nd AB, confirmed date in SO does not change to earlier confirmed date. And even if we run the standard back order processing V_RA or V_V2, system still does not schedule earlier.
    Any solution?

    Then tick Complete Deliv. Indicator in SO overview screen.
    Item 1: MatA     First Date: 15.05.2014     Item Cat: ZTAN Qty: 500     Confirmed Date = 29.05.2014
    Item 2: MatA First Date: 15.05.2014 Item Cat: ZTAS Qty: 1000 Confirmed Date = 29.05.2014
    Save SO.
    PO 1st AB line for SO item 2: Confirmed Date = 15.07.2014 results in Both SO item confirmed date = 15.07.2014
    PO 2nd AB line for SO item 2: Confirmed Date = 15.06.2014 results in Both SO Item confirmed date = 15.07.2014.
    When you say system has confirmed in the first instance (29.05.2014), I am not sure where system is showing 15-06-2014 & 15-07-2014. 
    G. Lakshmipathi

  • To get the table for the purchase order , Completely delivered

    Hi Experts,
    I need to find a table for a given purchase order no . EKKO-EBLEN ,
    which shows the status of the purchase orde is completely delivered or completely invoiced.
    I tried finding using the F1 help and the where used list, but couldnt..
    Thanks in advance ,
    Harshit Rungta

    in EKPO, check for each item
    - ELIKZ "Delivery completed" indicator
    - EREKZ "Final invoice indicator"
    Regards,
    Raymond

  • How To: Create Report Completely Programmatically AND Save it!!!

    Post Author: nicolasiac
    CA Forum: .NET
    Hi,
    I would to know whether Crystal Reports supports the creation of new reports completely programmatically. (I am using Visual Studio 2005)
    So far I am only able to create a new blank report programmatically (using Visual Studio 2005) and add it to an existing VS solution.However, I would like to be able to specify the datasource (stored procedure or table), create and add fields to specific locations on the report and then save these changes in the newly created report.I read that there is a Report Application Server.NET SDK but I didn't understand whether this allows the creation of new fields of a report at runtime only or not.
    I would like to create the fields of the report comlpetely programmatically (meaning no designer interaction) and save these fields in the report so that it can be opened by another user. (not at runtime)
    Please tell me whether this is supported by Crystal Reports or by purchasing a different version of Crystal Reports.
    Regards,
    Nicolas

    Post Author: Ted Ueda
    CA Forum: .NET
    You can get pretty close to complete report creation/modification with Crystal Reports XI Release 2 Service Pack 2 and KBase 5074668
    Sincerely,
    Ted Ueda

  • Oracle XML Report Completes in Warning

    Hi,
    I have a report which has a column called Days Left which needs to be highlighted if the Days Left value is 3 or less than 3.
    I have written the following code.
    <?if:DAYS_LEFT<=3?><?if:CLOSE_FLAG='N'?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?><?end if?>
    But the report completes in Warning and gives no output.
    Then I modified the code to :
    <?if:DAYS_LEFT<='3'?><?if:CLOSE_FLAG='N'?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?><?end if?>
    then the report completes in Normal and gives output, but the Days Left are highlighted for Days Left values more than 3 also..
    Please help me resolve this as soon as possible.
    We have UAT lined up next week :(
    Thanks
    Abhilash

    Hi All,
    I tried to preview using Template Viewer and its giving me this error when Days_left = 3
    [041813_093808967][oracle.apps.xdo.common.xml.XSLTWrapper][ERROR] XSL error:
    <Line 68, Column 92>: XML-22036: (Error) Cannot convert to number.
    [041813_093808967][oracle.apps.xdo.template.FOProcessor][ERROR] End Memory: max=247MB, total=66MB, free=22MB
    End of Process.
    Time: 0.172 sec.
    FO Formatting failed.
    Please help :(
    Thanks
    Abhilash

  • To find the completely Delivered Order

    Hi all,
    i want to check weather a sales order is delivered completely or not.  Suppose if a sales order is having say 3 items , out of that only 3 i delivered, 2 are pending, in that case i have to ignore that order, if all the items are delivered then only i have to consider  the order.
    so, i am checking at the header level for the status. The table is VBUK.  and the fields are
    LFSTK (Delivery status)  and GBSTK (Overall processing status).
    if both  LFSTK = 'C' and  GBSTK = 'C' then it is a completely delivered order.
    is this correct ?
    Thanks
    Kamala

    Thanks you gautham.
    i just want to crosscheck once again that
    at the header level only we can say the order is a Complted delivered or not ?
    Thanks for quick reply.

  • Run java code on report completion

    I understand that Business Objects allows for custom notifications when a scheduled report is completed successfully.  Is there a way in Java to be notified when a report is successfully completed?  I want to run some code upon report completion.  Thanks.

    When you create a schedule event, you can decide if the event will be triggered when the report succeeds, fails, or both. 
    You can then set it up so that each time the event is triggered, a java app that has been published to enterprise is run.  The difficulty here is that you will probably want to know exactly "which" report has completed succcesfully (Unless you set up a seperate event for each report) - and I don't know of any way to do that reliably.
    But if you just want some java code to run each time a report is completed, then you can use this method.
    So the steps would be:
    1. Create Schedule Event
    2. When you schedule the report - assign the event to it (You won't be able to do this in the CMC - you need to use either custom code or Infoview)
    3. Publish your java code to Enterprise
    4. Schedule your java code to run, and set the events to wait for to the event you assigned in Step 2
    a programmer learning programming from perl is like a chemisty student learning the definition of "exothermic" with dynamite

  • LMS not reporting complete for slide views

    Hi,
    I am trying to get my captivate projects to report competion status as complete to the LMS based on slide views. For testing I have created a very simple two slide Captivate. Both slides have 3 second durations, one caption each and nothing else, so the whole project runs for 6 seconds without any pauses, quizes or interactions of any kind. I have used SCORM cloud to view the SCORM calls being made by the package, and it is not reporting completion to the LMS.
    I am using the following settings in reporting:
    Any help will be really appreciated. Im about to watch http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1775550&loc=en_us to see if that can help. My backup plan is to put an interaction on the last slide but that's going to mess with my quiz results for the projects that do include quizzes (This is also why im reporting Quiz Results and Slide Views).
    Note: with these settings, passing a quiz causes the captivate to report completion.
    Thanks for any help
    Andrew Downes

    I'm not sure of this and defer to any contrary/additional replies that may follow...but...
    Past versions of CP have required some sort of scored interaction in order for the lesson to properly report via SCORM to the LMS.
    If you have a CP lesson without any scored interactions (no 'reporting'), that may be why completion is being recorded to the LMS.
    SO try setting up one scored interaction as you suggest.
    For CP lessons that do have quizzes, you won't need that separate scored interaction.
    You'll also likely want to change you settings to just 'Slide Views Only' if you just want completion reported based on them viewing the whole project, and I suspect Slide View Completion should be 100, not 10...
    Let us know how that goes...
    Erik

  • A question about report completion in production order

    Hi,
    Rightnow, i am trying to develop some application about production order and play with the production order in SAP. I found a issue which I don't understand. Let's say I have a production order with some components issued for the BOM and these components are managered by serial number. Natually, when I issue components into this production order SAP asks me to select serial number. But when I report completion for some products, SAP doesn't ask me to select component's serial number. Also when I try to return left components from production order to warehouse, SAP ask me to select the component's serial but the serial # list is the complete list which doesn't make sense. Because I have already report some products completed, how comes it ask me to select serial # from all of them? So seems that SAP doesn't manager the serial number properly in production oder, something wrong either I miss some steps in SAP or SAP missing something to manager the serial # for production order.
    Any idea?
    Thanks,
    Lan
    Edited by: ZHANGLAN on Jan 13, 2012 8:56 PM

    Hi Gordon,
    Thanks for your reply. If so, I think we have to use add-on with UDF or UDO to find a solution.
    BTW, I will ask another question in a new thread.
    Thanks,
    Lan

  • Notification when report complete

    Is there a way in Forms (or Discoverer) to notify a user when an Oracle Form is completed running in Batch mode? Can it notify if a report fails?
    Can you setup notification during the scheduling of the report?

    DECLARE
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status varchar2(20);
    BEGIN
    repid := find_report_object('report4');
    v_rep := RUN_REPORT_OBJECT(repid);
    rep_status := REPORT_OBJECT_STATUS(v_rep);
    if rep_status = 'FINISHED' then
    message('Report Completed');
    copy_report_object_output(v_rep,'d:\temp\local.pdf');
    host('netscape d:\temp\local.pdf');
    else
    message('Error when running report.');
    end if;
    END;

  • Ibots not delivering report completely

    i have an ibot which is scheduled to deliver a report in html format on a daily basis ,Im getting the report through the mail but the problem is ,the report is not complete if there are 1000 records present in the report ;im able to get only 250 records in the mail(Note: this 250 count corresponds to a single page of the answers report screen ie report records in the answers can be seen by navigating through 4 pages like click next)
    Can anyone tell me the cause of this issue ? as well provide a solution for this thanks
    Sivachandran

    Hi,
    Add this row to the instanceconfig.xml file (/OracleBIData/web/config/), under the node <WebConfig><ServerInstance><Views><Table>
    *<DefaultRowsDisplayed>1000</DefaultRowsDisplayed>*
    and restart the presentation services
    Regards.

Maybe you are looking for