Report Data in Alternate Unit of Measure

Hi
We are working on Unit of measure Conversion for this we are following How To.Report Data in Alternate Units of Measure document. We did all the steps as mentioned in the document still this is not working. All results are showing zeros with same units of key figure qty like EA, ROl, Boxes and so on. We want to convert this into Cartons and Pallets. My question is is there any thing we need to do which is not mentioned in this white paper.
For example maintaining Conversion Factor in R/3 side?
Do we need to add Conversion factor Key figure to Transfer Structure and Info cubes?
(Which is not mentioned in the white paper) if so which field we need to map this in Transfer Structure?
We are in Version 3.5
Thanks
Naga

Naga,
For your first question.....you can "maintain" different units of measure in 0MAT_UNIT, but at one time you can report on only one alternate unit.
For your second question, I have a feeling that it is the problem with your enhancement to the std SAP code which is mentioned in the How to Paper. After you have done the enhancements did you activate the programs again? If there is somebody with you who is good in ABAP just run this enhancement through him.
Also just make sure you have followed everystep in that how to document, including the query designer part of it.
According to the logic of that paper, if the alternate unit is not available, then it is supposed bring back data in base unit, it is not supposed to error out. Check your ehancement piece again.
Thanks
Yashu Raj

Similar Messages

Reporting Data in Alternate Units of Measure

We have a requirement to report data in base unit of measure and also in pounds and kilograms. I have read the paper "How to Report Data in Alternate Units of Measure". My problem is that in our R/3 system the conversion from base unit of measure to pounds is maintained, but no conversion from base unit of measure to kilograms is maintained. In BW, I have 0MAT_UNIT for conversion to pounds but not to kilograms. For the solution to work, am I correct in thinking that the conversion to kilograms must exist in 0MAT_UNIT?
Also, the paper states that it is applicable to BW releases 2.0A to 3.1C. Those of you on BW 3.5 - is there new functionality or a different way of handling reporting in alternate units of measure?
Thanks for your help,
Gail Bodner

Gail,
Nothing new in 3.5 for UoM conversion. It will still have to be the way described in the How To paper.
Maintin the conversion in R/3. Also, Pounds to KG is a standard coversion - you can hard code it too. Issue in UoM conversion comes in where you cut across type of uints, i.e. from vol. to weight. Then additional information like density is needed but within the same area, it shouldn't be a problem.
Cheers
Aneesh

Reporting data in alternate unit of measure

hi
I was going through the document " How to report data in alternate unit of meaure" .
There they have talked about modification in program LRRSVF20.
Can anyone tell me what does this include "LRRSVF20" does?
Regards,
Moniika

Hi,
Please tell me when i create a program "YBW_AUNIT_ENHANCEMENT" UNDER se38 and type: include...
what code i should write under this program?
i am pasting the program LRRSVF20 AND please tell me what should i write in program ""YBW_AUNIT_ENHANCEMENT"?
***INCLUDE LRRSVF20 .
*& Form varchavl_atr_get
form varchavl_atr_get using i_t_sid type rrsi_t_sid
i_chanm type rsd_iobjnm
i_th_var_atr type rro01_th_var_lrech
i_srdate type sy-datum
i_mostrecent type rsr_mostrecent
changing c_th_varchavl type rrsv_th_varchavl.
call method l_r_reader->sid_read_master
exporting
i_readatr = rsdm_c_readatr-specified
i_t_req_atr = l_t_req_atr
i_date = i_srdate
i_mostrecent = i_mostrecent
importing
e_tx_atr = l_tx_atr
changing
c_t_chavlinfo = l_t_chavlinfo
exceptions
others = 1.
if sy-subrc <> 0.
raise inherited_error.
endif.
*{ INSERT
Enhancement Alternate U.o.M.
INCLUDE ybw_aunit_enhancement.
*} INSERT
PERFORM varchavl_atr_fill USING i_th_var_atr
l_tx_atr
CHANGING c_th_varchavl.
endform. " varchavl_atr_get
***INCLUDE YBW_AUNIT_ENHANCEMENT.
TYPE-POOLS: rrs0.
DATA:
l_vnam LIKE rszglobv-vnam,
l_s_cob_pro TYPE rsd_s_cob_pro,
l_s_rkb1d TYPE rsr_s_rkb1d,
l_periv TYPE rro01_s_rkb1f-periv,
l_t_var_range TYPE rrs0_t_var_range,
l_s_var_range TYPE rrs0_s_var_range,
l_t_range TYPE rsr_t_rangesid,
l_s_range TYPE rsr_s_rangesid,
l_unit LIKE rszglobv-meeht,
l_currency LIKE rszglobv-waers.
FIELD-SYMBOLS:
<l_sx_atr> TYPE rsdm_sx_atr,
<l_s_var> TYPE rro01_s_var_lrech,
<l_s_atr> TYPE rsdm_s_atr,
<l_s_atr_cu> TYPE rsdm_s_atr.
Loop over all characteristic values
LOOP AT l_tx_atr ASSIGNING <l_sx_atr>.
Loop over all variables to be replaced by attributes
LOOP AT i_th_var_atr ASSIGNING <l_s_var>.
Fill additional information into pseudo variables
REFRESH l_t_var_range.
InfoObject (i.e. characteristic)
CLEAR l_s_var_range.
l_s_var_range-sign = 'I'.
l_s_var_range-opt = 'EQ'.
l_s_var_range-vnam = '1CHANM'.
l_s_var_range-iobjnm = i_chanm.
l_s_var_range-low = <l_sx_atr>-chavl.
APPEND l_s_var_range TO l_t_var_range.
Attribute
READ TABLE <l_sx_atr>-t_atr ASSIGNING <l_s_atr>
WITH KEY attrinm = <l_s_var>-attrinm.
IF sy-subrc <> 0.
RAISE x_message.
ENDIF.
CLEAR l_s_var_range.
l_s_var_range-sign = 'I'.
l_s_var_range-opt = 'EQ'.
l_s_var_range-vnam = '1ATTRINM'.
l_s_var_range-iobjnm = <l_s_atr>-attrinm.
l_s_var_range-low = <l_s_atr>-attrivl.
APPEND l_s_var_range TO l_t_var_range.
Unit of measure (only for amounts and quantities)
IF ( <l_s_var>-mwkz = 'M' OR <l_s_var>-mwkz = 'Q' ) AND
( <l_s_var>-fixcudim IS INITIAL ).
CLEAR l_s_var_range.
l_s_var_range-sign = 'I'.
l_s_var_range-opt = 'EQ'.
l_s_var_range-vnam = '1CUNM'.
READ TABLE <l_sx_atr>-t_atr ASSIGNING <l_s_atr_cu>
WITH KEY attrinm = <l_s_var>-cunm.
IF sy-subrc = 0.
l_s_var_range-iobjnm = <l_s_atr_cu>-attrinm.
l_s_var_range-low = <l_s_atr_cu>-attrivl.
APPEND l_s_var_range TO l_t_var_range.
ENDIF.
ENDIF.
Key date of query
CLEAR l_s_var_range.
l_s_var_range-sign = 'I'.
l_s_var_range-opt = 'EQ'.
l_s_var_range-vnam = '1DATE'.
l_s_var_range-iobjnm = '0DATE'.
l_s_var_range-low = i_srdate.
APPEND l_s_var_range TO l_t_var_range.
InfoObject properties
CALL FUNCTION 'RSD_COB_PRO_GET_ALWAYS'
EXPORTING
i_iobjnm = i_chanm
IMPORTING
e_s_cob_pro = l_s_cob_pro
EXCEPTIONS
infocube_not_found = 1
error_reading_infocatalog = 2
iobjnm_not_found = 3
illegal_input = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
l_vnam = <l_s_atr>-attrinm.
Call variable exit to get virtual attribute
CALL FUNCTION 'EXIT_SAPLRRS0_001'
EXPORTING
i_vnam = l_vnam
i_vartyp = rrkg_c_vartyp-formula
i_iobjnm = i_chanm
i_s_cob_pro = l_s_cob_pro
i_s_rkb1d = l_s_rkb1d
i_periv = l_periv
i_t_var_range = l_t_var_range
IMPORTING
e_t_range = l_t_range
e_meeht = l_unit
e_waers = l_currency
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
READ TABLE l_t_range INTO l_s_range INDEX 1.
IF sy-subrc = 0.
Attribute value
<l_s_atr>-attrivl = l_s_range-low.
Attribute unit of measure (only for amounts and quantities)
IF <l_s_var>-mwkz = 'M' AND <l_s_var>-fixcudim IS INITIAL.
<l_s_atr_cu>-attrivl = l_unit.
ELSEIF <l_s_var>-mwkz = 'W' AND <l_s_var>-fixcudim IS INITIAL.
<l_s_atr_cu>-attrivl = l_currency.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP. " variables for attributes
ENDLOOP. " characteristic values
Thanks,
Vijaya.

Variable for Alternate Unit of Measure

Hello Experts
I have implemented the soultion for reporting data in Alternate Unit of measure using the "How to..." guide provided at https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f
This solution involves creating a variable which prompts the user to enter the required unit of measure.
However I have a situation where I would like to create variable which is not input-ready and has a fixed value assigned to it without prompting the user. Moreover, I cannot modify the already existing input-ready variable as it is used in other Queries.
Does this involves creating a new user exit or modifying the existing user exit. If yes then can you please tell me how this can be done.
Thanks
Rishi

Hi Rishi,
You can follow any one the below procedure for solve your issue.
1. You can change the variable by removing the check box "Ready to input". But you mentioned that you used that variable in other queries also. So, I am not suggesting this.
2. You create a new variable same as the existing variable but with out selecting "Ready to Input" check box. Now when the user run the query, that variable will not be seen to the user. Now, we will see the customer exit, you assign new variable value to existing variable, before that you have to write a condition for checking the query name. If you are running the query which have the new variable then assign the variable value to old variable. This will solve your question.
I hope you understood this procedure. If you have any doubts let me know.
Regards,
Patil.

Variable issue for Alternate Unit of Measure

Hello Experts
I have implemented the soultion for reporting data in Alternate Unit of measure using the "How to..." guide provided at https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f
This solution involves creating a variable which prompts the user to enter the required unit of measure.
However I have a situation where I would like to create variable which is not input-ready and has a fixed value assigned to it without prompting the user. Moreover, I cannot modify the already existing input-ready variable as it is used in other Queries.
Does this involves creating a new user exit or modifying the existing user exit. If yes then can you please tell me how this can be done.
Thanks
Rishi

Hi Rishi,
You can follow any one the below procedure for solve your issue.
1. You can change the variable by removing the check box "Ready to input". But you mentioned that you used that variable in other queries also. So, I am not suggesting this.
2. You create a new variable same as the existing variable but with out selecting "Ready to Input" check box. Now when the user run the query, that variable will not be seen to the user. Now, we will see the customer exit, you assign new variable value to existing variable, before that you have to write a condition for checking the query name. If you are running the query which have the new variable then assign the variable value to old variable. This will solve your question.
I hope you understood this procedure. If you have any doubts let me know.
Regards,
Patil.

Alternate units of measure

Hi,
In order to implement the Alternate units of measure -
I need to implement user exit and activate enhancement RSR0001. In the description below is listed what to implement of includes. In the function group XRSR - I have added the code to the includes ZXRSRTOP and ZXRSRU01. These are both a part of the group. But the last one ZXRSRF01 is not in the include folder. I tried to create an include by right click on the include folder and choose create - I named it ZXRSRF01 and copied the code into it. But it is still not to be found in the XRSR function group and when I check the program the get_form call raises and error in the code of the include ZXRSRU01. How to get the include in the function group or is there another solution?
From SAP - How to...report data in alternate units of measure.
3.7 User Exit for Variables
Implement user exit for variables and activate enhancement RSR00001.
***INCLUDE ZXRSRTOP.
Enhancement: Alternate U.o.M.
DATA: g_aunit TYPE /bi0/oimat_unit.
***INCLUDE ZXRSRU01.
Enhancement: Alternate U.o.M.
DATA:
l_s_range TYPE rsr_s_rangesid,
l_s_var TYPE rrs0_s_var_range.
l_dummy(72) TYPE c. "delete
DATA:
l_factor TYPE f,
l_factor1 TYPE f,
l_factor2 TYPE f,
l_msgv1 LIKE sy-msgv1, "insert
l_msgv2 LIKE sy-msgv2, "insert
l_msgv3 LIKE sy-msgv3, "insert
l_material LIKE /bi0/pmaterial-material,
l_base_uom LIKE /bi0/pmaterial-base_uom.
Called after user input
IF i_step = 3.
Get variable for alternative unit entered by user
Validate entry and store as global variable
READ TABLE i_t_var_range WITH KEY vnam = 'YTAUNIT' INTO l_s_var.
IF sy-subrc = 0.
TRANSLATE l_s_var-low TO UPPER CASE. "#EC TRANSLANG
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_INPUT'
EXPORTING
input = l_s_var-low
language = sy-langu
IMPORTING
output = g_aunit
EXCEPTIONS
unit_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
Error: Please enter a valid unit of measure
l_msgv1 = 'Unknown unit of measure:'.
l_msgv2 = l_s_var-low. "insert
l_msgv3 = '. Please enter a valid unit of measure.'.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
i_class = 'R9'
i_type = 'E'
i_number = '000'
i_msgv1 = l_msgv1
i_msgv2 = l_msgv2 "change
i_msgv3 = l_msgv3
EXCEPTIONS
dummy = 0
OTHERS = 0.
CALL FUNCTION 'RRMS_MESSAGES_SHOW'.
CALL FUNCTION 'RRMS_MESSAGES_DELETE'.
sy-subrc = 4.
RAISE again. "#EC *
ENDIF.
ENDIF.
ENDIF.
Called from "Get Attribute" Function (Modification)
I_VNAM Attribute (not the name of the formula variable)
I_IOBJNM InfoObject
I_T_VAR_RANGE Contains characteristic value, attribute value,
unit of measure, query key date
IF i_step = 0 AND i_vnam = 'YUOMCNVF' AND i_iobjnm = '0MATERIAL'.
read material and base uom from variables
LOOP AT i_t_var_range INTO l_s_var.
CASE l_s_var-iobjnm.
WHEN '0MATERIAL'. l_material = l_s_var-low.
WHEN '0BASE_UOM'. l_base_uom = l_s_var-low.
ENDCASE.
ENDLOOP.
get factor for base UoM
PERFORM get_factor USING l_material l_base_uom l_factor1.
get factor for alternate UoM
PERFORM get_factor USING l_material g_aunit l_factor2.
return conversion factor for variable
IF l_factor2 <> '0.0'.
l_factor = l_factor1 / l_factor2.
e_meeht = g_aunit. "insert
ELSE.
When the UoM conversion is not maintained, instead of showing 0, the
base UoM with a factor of 1 is used. Therefore, the user sees MIXED
VALUES in the total line and knows right away that there is something
wrong. That way its easier to track inexistent conversion factors.
l_factor = 0. "delete
l_factor = 1. "insert
e_meeht = l_base_uom. "insert
ENDIF.
CLEAR l_s_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
l_s_range-low = l_factor.
APPEND l_s_range TO e_t_range.
e_meeht = g_aunit. "delete
ENDIF.
***INCLUDE ZXRSRF01.
*& Form get_factor
Get conversion factor from /bi0/pmat_unit
FORM get_factor USING i_material TYPE /bi0/oimaterial
i_mat_unit TYPE /bi0/oimat_unit
e_factor.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit.
STATICS:
s_t_mat_unit TYPE SORTED TABLE OF ys_mat_unit
WITH UNIQUE DEFAULT KEY.
CLEAR: l_s_mat_unit, e_factor.
READ TABLE s_t_mat_unit INTO l_s_mat_unit WITH KEY
material = i_material
mat_unit = i_mat_unit.
IF sy-subrc <> 0.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = i_material
AND mat_unit = i_mat_unit
AND objvers = 'A'.
IF sy-subrc = 0.
INSERT l_s_mat_unit INTO TABLE s_t_mat_unit.
ENDIF.
ENDIF.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-numerator / l_s_mat_unit-denomintr.
ENDIF.
ENDFORM. " get_factor
Hope someone can help.
Thanks

Hi Karin,
I am also facing the same problem for alternate units of measure...i tried to access the path
websmp201.sap-ag.de/~sapdownload/011000358700000488512003E/Howto_alternate_uom5.pdf
but it is not found...can u please give me this document if u have it with you.?
Thanks,
Vijaya

Display of Alternate Unit of Measure

Hi there,
We try to display alternate unit of measure <b>in BEx</b> by implementing the following Howto Doc:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to report data in alternate units of measure
It works fine as long as 0MATERIAL is included <b>in the rows</b> of the report.
In any other case (e.g. 0MATERIAL is a free characteristic or not included in the report at all) this solution won't work and we get the "red x"!
Any suggestions??
Thanx,
Ofer.

Hi Ofer,
Virtual Char/KF behave as normal Char/KF in a sense that you create and add them in Infoproviders or Queries just like normal Char/KF. But they do not hold any data/values and their values are determined only at query run time (by writing code in user-exit for virtual kf/char.)
The logic could be something like this (though I'm pretty sure, would need to work on it again ):
Keep in mind that all this would be performed at query run time:
1. For each record, read material master data.
2. Get quantity, UoM for above record.
2. Get UoM from selection screen variable.
3. Convert and store in virtual KF.
You can search this forum for more information on it. Do let us know if need any more info.
Regards,
Vikrant.

Display alternate unit of measure as a characteristic

Hello,
I have successfully implemented the 'How to ... Report Data in Alternate Units of Measure' using the business content infocube 0IC_C03, Material Stocks/Movements.
The infocube currently contains only base unit of measure.
In the queries I am displaying key figures in base unit and alternate unit of measure.
My requirement is to subtotal by alternate unit of measure. Is this possible? If I add 0BASE_UOM to the query this has no affect on the alternate unit of measure.
Can I add an alternate unit of measure characteristic to the infocube and populate it during query run time? Where would this configuration take place?
SAP_BW 3.1, content 3.3.
Thanks for any suggestions,
Mark

HI,
Go to Inforecord of that material with that vender on that plant.
Change Inforecord(me12)...here in general data...change the order unit.
system will give the conversion factor as u defined in material master.
Hope Help U !
Regards,
Pardeep Malik

Report Data in to two alternate Unit of Measures

Hi
We Implemented "How to Report Data in to two alternate Unit of Measure". I have a question
1 Could we maintain Two alternate Unit of Measures for one Base Unit of Measure?
For example if Base unit is EA ( Each) we need to maintain this as CAR( Carton) and PAL ( Pallet).
Thanks
Naga

Hi Naga,
Are you talking about Qty Unit conversion. We can surely maintain CAR,EA,PAL and all. The Numerator and Denoms are maintained in T006. And accordingly the conversion happens.
Apart from that you can have your own customized Qty conversion using Transaction 'RSUOM'.
Lemme me know if this helps.
-Bikas

Alternate unit of measure report

We need to run a report for materials with a certain alternate unit of measure defined. Does one exist? If not, does anyone know the table(s) where this data is stored?
Thanks in advance!

alternative units of a material are stored in table MARM

Alternate unit of measurement for quantity field in Report

Hi All,
I got a requirement like to populate alternate unit of measurement also in the report so how best i can do this when taking consideration of performance issues and all. I got few suggestions like to write a field routine in tranformations...
So guide me how best i can do this, if any code is required let me know the code also.
Eg. material...PP_Ingot has 2 units of measurement .....Ton & Each.
So i need to display Qty in both Tons and Each in the report.
Please suggest me .
Thanks
Srini.

Hi Gregory,
Thanks for the immediate reply.I was busy in some other issue so this is delayed.
I hav a key fig YLOSMENGE (inspection lot qty) in Base unit of Mea and mapped to r3 with losmenge and baseunit of mea.
Next i hav created a new kf ZLOSMENGE with unit of mea so i want to know how to map this with r3 field and with which unit.
So kindly suggest me.
Regards
Srini.

How to report on Alternate Units of measure

Hi ,
I am trying to implement the unit conversion ..i have few basic questions..
1)Do we need to have the 0MAT_UNIT in the cube/ODS
2)for 0material do i specifically need the base unit of measure as unit for the attribute conversion factor..
How do i go ahead if my conversion factor has a different unit..
3)In my scenario i am trying to do unit conversion on a keyfigure which has unit as billing qty in SKU..Do I need to do anything different in this case in order to convert to a diff unit..
Had changed the code given in the how to do doc..The report gave all the values as zero.
Pl suggest.
Appreciate ur inputs.
Regards,
G.V

I am using BW 3.5 .
Loaded/activated both 0material and omat_unit.
0MAT_UNIT is not maintained in the ODS/CUBE.
The keyfigure i am trying to convert to alternate unit of measure is billing qty in SKU which has billing qty in SKU
as unit to that quantity..
The user input variable for alternate unit of measure is defined on the unit billing qty in SKU..
when i debug it is not processing through this loop..
IF i_step = 0 AND i_vnam = 'YUOMCNVF' AND i_iobjnm = '0MATERIAL'.
read material and base uom from variables
LOOP AT i_t_var_range INTO l_s_var.
CASE l_s_var-iobjnm.
WHEN '0MATERIAL'. l_material = l_s_var-low.
WHEN '0BASE_UOM'. l_base_uom = l_s_var-low.
ENDCASE.
ENDLOOP.
Pl advise..

How to Report on Alternate Unit of Measure

Hi All,
    We recently implemented SAP for our Canadian operations. The Canadians want to see all our custom and standard reports in Alternate units of measure ( KG's & Ltr's ) but our reports only display in Lbs & Gal's. We were able to change our custom reports but is there any setting that SAP provides for the standard reports/transactions to display Alt UoM. We don't want to rush in and start changing standard reports. I'm sure, lot of you faced this situation before.
Regards,
Srini

hi,
use the FM UNIT_CONERSION_SIMPLE
hope this helps
check this code
unit_in = itab-meins
unit_out = 'GLL'.
    CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
         EXPORTING
              input                = itab-meins
          NO_TYPE_CHECK        = 'X'
          round_sign           = ' '
              unit_in              = unit_in
              unit_out             = unit_out
         IMPORTING
          ADD_CONST            =
          DECIMALS             =
          DENOMINATOR          =
          NUMERATOR            =
              output               = factor
         EXCEPTIONS
              conversion_not_found = 1
              division_by_zero     = 2
              input_invalid        = 3
              output_invalid       = 4
              overflow             = 5
              type_invalid         = 6
              units_missing        = 7
              unit_in_not_found    = 8
              unit_out_not_found   = 9
              OTHERS               = 10.
    IF sy-subrc <> 0.
      e_error = 1.
      EXIT.
    ENDIF.
Message was edited by: srinu k

Conversion in Alternate Unit of Measure

Hi All,
I have a report in which i report data in both base and alternate units of measure, the report has three filelds Material , Quantity (BUOM) and Quantity (AUOM). The problem is for a certain material; say Mat_1, the unit in which it is entered can be Carton or EA, i am using Carton to litre conversion, but my query fails when the material has EA as its unit. Is there a way by which i can convert the unit to litres be it in Cartons or EA???
Kindly suggest a solution anyone pls pls help
Thanx in advance
Regards,

Hi,
You can define your own Unit Translation using Tcode RSUOM in such a way that it takes a dynamic unit from each source record with fixed target unit as Litres.
Refer http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/325d4217139041e10000000a1550b0/content.htm for Unit Translation creation.
You would need to ensure that unit translations are available in T006 table.
--Priya

ALternate Unit of Measure as a Order unit in PO

Hi everyone,
I have a problem while ordering the Quantity in PO with alternate unit which is maintained in MMR. The problem is
in MMR, I have maintained EA as the UOM and PAC as the Alternate unit of measure.
while in PO, i am trying to give the 'Order Unit (OUn) as the PAC which is the alternate unit maintained. But it is not accepting and
again reverting back to EA. i couldnt find out the solution. But some POs for that material is already ordered as PAC unit.
Could it be problem with the MMR ?
Regards
Siva

HI,
Go to Inforecord of that material with that vender on that plant.
Change Inforecord(me12)...here in general data...change the order unit.
system will give the conversion factor as u defined in material master.
Hope Help U !
Regards,
Pardeep Malik

Report Data in Alternate Unit of Measure

Similar Messages

Maybe you are looking for