Report Data Pane missing

The Report Data pane is missing in VS version 9.0.30729.4462 QFE. Does anyone know how to fix this? I can't proceed to build a report without this vital step.
Thanks in advance.

Hi GtSmith555,
Thanks for your question and Olaf’s reply. Based on my research, I found that your VS version 9.0.30729.4462 QFE may be correspond to the
VS 2010. In this version, you can find the Report Data Pane by click “Data” in the Menu list, then click “Show Datasource”.
Best Regards. Sharp Wang

Similar Messages

SCCM report data are missing inside report since Update SCCM 2012 to R2 Cu1

Hi All,
I encountered an issue regarding certains SCCM reports after migrating to SCCM R2 CU1.
After this upgrade, I've already encountered some issues on differents reports .. reports where we need to select a collection or patches or computers from a drop list (all theses drop list were empty).
I resolved these issues by adding the "read" security permission in the security role dedicated to our Support Team. (Read permission is now applied on Collections, Packages ect...)
This sort of report works well now.
But this same Team show me another issue where I did not find any resolution.
In the categorie called "Hardware - General", we have a report named "Computer information for a specific computer" where, as you know, we normally could find some informations regarding a computer.
In fact, the only informations which are visible through this report are the NetbiosName,Username, Domain User & computer and IP adress.
All others informations are not displayed.
If I use this report with a user who has admin rights in SCCM (which is not the fact with my support team of course) ...all informations are displayed normally.
It seems that it looks like the first read rights issue that I encountered at the beginning, but I did not find where could be the cause of this issue
Does anyone has already seen this sort of issue ?

In CM12R2 RBA is now enabled for report. So this tell me that you have NOT grant the support team access to the data and therefore this is normal.
There is a quick fix for this see Brian post.
http://www.mnscug.org/blogs/brian-mason/162-report-user-role
http://www.enhansoft.com/

Missing Connection Types in Report Data Source Properties

I am running three installations of SharePoint 2013 with SQL 2012 for Business Intelligence, with Kerberos working.
I have been having intermittent issues with SQL Reporting Services in a multi-server configuration, but finally had it working in all three environments. We discovered many of our issues were caused by master page customizations which we have now disabled
temporarily while we work on function issues.
However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened. Most everything appears to still be working, except Reporting Services. I have verified that features are enabled
in both the farm and the site collection, as well as insured managed content types are being allowed on the target document libraries. I also verified the Reporting Service properties and database connections. However, I have found two clear symptoms
which I can find no other information regarding (in logs or in online searches):
1) If we try to create a new "Report Data Source" using the SharePoint UI, it will open a new Data Source Properties window, but in the "Data Source Type" field, there are no values available for me to select my connection type (e.g.,
Microsoft SQL Server).
2) In Central Administration, while administering the Reporting Services Service Application, I can manage a majority of the settings, including System Settings, Manage Jobs, Key Management, etc. However, if I click on the link for "E-mail Settings,"
I get the dreaded "Sorry Something went wrong screen," with an error saying that "Object reference is not set to an instance of an object."
So I am hoping someone has an idea of where I can look for additional information on this issue, or even better, knows what I am missing to get Reporting Services functional again in this environment!
Thanks in advance for any help provided.
Elohir

However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened.
Hi Elohir,
I assume you are installing Reporting Services SharePoint mode for SharePoint 2013, you need to:
1. Install "Reporting Services – SharePoint" and "Reporting Services add-in for SharePoint Products" on the SharePoint server that the SSRS service will run on. All other SP servers only need the "Reporting Services
add-in for SharePoint Products."
2. Run the Insall-SPRSService and Install-SPRSServiceProxy on Central Admin and SSRS server.
3. Start SSRS Service only on desired SSRS servers.
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Since the issue occurs only to one of the environments, please provide more information about your multi-server configuration, and point out the server where the issue occurs.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Master data text missing in reports

Dear All,
In my report, some text for infoobject master data is missing. When I see the text table of that, entry for the interval containing 31/12/9999 is not there. I checked in R3 and there also this entry is absent. This is fine and no issues. This is in BI Quality.
Same is not the case in Production. Here entry is there in BI for 31/12/9999 in text table but in R3 Prod, entry is not there.
My question:
How come the entry is there in text table in BI Prod for 31/12/9999 ? Has someone extracted it earlier when there was an entry in R3 or there could be some other reason ? If someone has extracted it earlier, and now in R3 prod, entry is not there, then this should immediately reflect in BI ?
Please clear my confusions.
Regards,
Srinivas

Fine with the answers. But how come the table in BI system is not in sync with the R3 ? Since the text is absent in R3 for the interval 31/12/9999, so it should be blank too in BI after the most recent update ? This is the property of master data.
Thanks,
Srinivas

SCCM Reporting: Software Updates / Apllication the "Installed date" is missing or null in reports

When the “V_GS_Add_Remove_Programs” or “V_GS_Quick_Fix_Engineering” queried for installed date (the views that contains information on updates/application
installed date), the “installDate0” Column returns “Null” or is
"blank" on most of the rows.
The machine in this example is “X”
2. As you can see from the machines X's add remove Programs installed Date is given clearly.
Appreciate your help on this as its for an audit report of windows updates and applications installed date, I know that some applications do not populate this value but my argument is if its visible from Programs and Features why isn't the data being collected.
Best Regards,
Michael

Duplicated post.
http://social.technet.microsoft.com/Forums/en-US/678489ad-3289-4fd6-8e84-bbaf487abacf/sccm-reporting-software-updates-apllication-the-installed-date-is-missing-or-null-in-reports?forum=configmanagergeneral
http://www.enhansoft.com/

Urgent help needed: registry.dat is missing when i run my form in web base

Hi gurus,
i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
Details...
Java Exception:
oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
at oracle.forms.engine.Runform.initRegistry(Unknow Source)
at oracle.forms.engine.Runform.startRegistry(Unknow Source)
at oracle.forms.engine.Main.createRunform(Unknow Source)
at oracle.forms.engine.Main.start(Unknow Source)
at sun.applet.JinitAppletPanel.run(Compiled code)
at java.lang.Tread.run(Thread.java:466)
what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
Your urgent help and advise is needed plssssssss.......
Many thanks in advance.

The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
Also, try if the URL with the slash:
http://domain.com/form60/java/oracle/forms/registry/Registry.dat
does work when you just paste it in a browser. It should download the Registry.dat file

FRM 92120 Registry dat is missing

The error> FRM-92120 <to log into an EBS instance and click on a Form (with all the forms).
------- error ------
FRM-92120 Registry file http://hhh.xxx.com.br:8000/OA_JAVA/oracle/forms/registry/Registry.dat is missing
Details:
Java Exception:
oracle.forms.engine.RunformExeception: FRM-92120:Registry file http://hhh.xxx.com.br:8000/OA_JAVA/oracle/forms/registry/Registry.dat is missing.
at oracle.forms.engine.Runform.initRegistry(Unknow Source)
at oracle.forms.engine.Runform.startRunform(Unknow Source)
at oracle.forms.engine.Main.createRunform(Unknow Source)
at oracle.forms.engine.Main.start(Unknow Source)
at sun.plugin2.applet.Plugin2Manager$AppleExecutionRunnable.run(Unknow Source)
at java.lang.Thread.run(Unkwon Source)
I have done the following steps
----------------------------------------------------- >>>> http://finance-kc.gsa.gov/webbill/faq.shtml#l10
Step 1: Verify that SSL v2.0 and v3.0 options are checked in Java Control Panel.
a. Click 'Start' menu on Windows taskbar and select 'Control Panel'. If you do not find 'Control Panel' directly under 'Start' menu, then you should find it under 'Settings'
b. Locate an entry named 'Java' on Control Panel window and double click on it
c. Click 'Advanced' tab on Java Control Panel window
d. Locate setting named 'Security' and click on the plus sign prefixing it to show options
e. Verify the option 'Use SSL 2.0' is checked and if not check it
f. Verify the option 'Use SSL 3.0' is checked and if not check it
g. Click 'Apply'
h. Click 'OK'
Step 2: Close your browser session.
Step 3: Open a new browser session and try the register or login action again to see if it works okay. If not, proceed to next set of steps.
Step 4: Re-start your computer.
Step 5: Open a browser session.
Step 6: Clear your browser temporary Internet files by taking the steps stated below.
a. Select 'Tools' from Internet Explorer browser menu
b. Select 'Internet Options'
c. On the 'General' tab, under section labeled 'Temporary Internet Files', click 'Delete Files' button
d. Click 'OK' on Delete Files confirmation box
e. Upon completion of delete files, click 'OK' on Internet Options
Step 7: Close your browser session.
Step 8: Open a new browser session and try the register or login action again to see if it works okay. If not, proceed to next set of steps.
Step 9: Clear your Java temporary Internet files by taking the steps stated below.
a. Click 'Start' menu on Windows taskbar and select 'Control Panel'. If you do not find 'Control Panel' directly under 'Start' menu, then you should find it under 'Settings'
b. Locate an entry named 'Java' on Control Panel window and double click on it
c. On the 'General' tab, under section labeled 'Temporary Internet Files', click 'Delete Files' button
d. Click 'OK' on Delete Files confirmation box
e. Upon completion of delete files, click 'OK' on Java Control Panel
Step 10: Close your browser session.
Step 11: Open a new browser session and try the register or login action again to see if it works okay. If not, provide the following to the help desk: the browser name and version used, Java plug-in version used, sequence of events leading up to the issue or problem being reported and any message displayed in a screenshot or text format and/or describe browser behavior that will help us with troubleshooting.
====================================================================================================
And also did not resolve the error then appealed to the Deployment Guide in página157 --http://otndnld.oracle.co.jp/products/forms/htdocs/install/Materials/doc/EN/B14032_02.pdf
A.2.3.6 FRM-92120
Cause:
This is a server configuration error, which occurs when the client is unable to find the
file Registry.dat on the middle tier.
Solution:
When this error occurs, check if the file Registry.dat is present on the middle tier in the
directory ORACLE_HOME/forms/java/oracle/forms/registry. If it is not
present, then it needs to be placed.
In a running Forms application, if you suddenly come across this error, there is a
possibility that the HTTP server has gone down. You may verify this by typing the
Diagnosing Server Crashes with Stack Traces
A-8 Deployment Guide
URL http://myserver.com:NNNN in your browser. Here you need to replace
myserver.com with your host name and NNNN with your HTTP server’s port
number. If your browser says that it could not connect to the server, then your HTTP
server is down and you need to contact your system administrator to bring it up.
When the HTTP server is up and running, on giving the URL
http://myserver.com:NNNN your browser will show the “OracleAS welcome”.
=============================================================================================
also had no positive effect.
I test in different browsers, different machines, the Jinitiator removed and installed again.
The versions I'm using are
EBS - R12.0.4
Java 1.6.0_15
Browsers - IE 8 e Mozzila Firefox 3.0
Can someone suggest something else.
Extremely grateful for any suggestion.

Hi,
What changes have been done recently?
Did AutoConfig complete successfully on all tiers?
If SSL has been enabled recently, please run SSL diagnostics tests and make sure all runs successfully -- Search "My Oracle Support" for "SSL Diagnostics R12".
Enable debug and see if you get more details about the error -- See (Note: 422419.1 - R12, 12.1.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN) and (Note: 438652.1 - R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications).
Regards,
Hussein

Xcelsius - Crystal Report Data Consumer connection Issues

Sorry for the long post but i hope with the full explaination, i can get a quick answer & solution.
Using Crystal Reports 2008 and Xcelsius 2008 Engage, SQL 2008 stored procedure.
I have tested the Crystal Reports Data Consumer connection within the Xcelsius program, using the following steps :
1. Create a stored procedure that returns the Continent Name and the Count of Projects within each Continent.
2. Create a Crystal Report using the stored procedure, 2 columns in the Details section, column names in the Page Header section.
3. Save and export this as an Excel spreadsheet.
4. Open the Xcelsius program, new file and import spreadsheet. Column A is the Continent Name, Column B is the Count.
5. Without altering the spreadsheet, I created a graph using the data imbedded. i.Bar Graph, series and row selections. Ii. Pie chart with row data selection. Iii.Column data as series and row selections.
6. Created a Crystal Report Data Consumer connection using the data imbedded within then spreadsheet. The column A as the u201CRow Headersu201D & column B as the u201CDatau201D. Took quite a while to get the right combination of selected components so that the preview actually showed the data and the corresponding data labels. The Legend still hasnu2019t shown up.
7. Save and Export as Flash (swf) file.
8. Close Xcelsius and open Crystal Reports.
9. Open the same report used to create the spreadsheet and Insert -> Flash, choosing the newly created swf file.
10. Link the data displayed On the Crystal Report to the Flash file now embedded, using the Flash Expert. Have tried both with the data listed on the Report, and the data listed as the result of the stored procedure.
11. Previewed and the Data shown on the Graph does match the data listed within the Details section of the Report.
12. I then altered the stored procedure to add u201C1u201D to all counts, and refreshed the Crystal Report. (I cannot add new data to the underlying database/tables, due to various other folks & projects using that same database.)
13. The listed data does change to match the changes within the procedure.
14. The Data labels on the Graph do change to match the changes within the procedure.
15. The Actual Displayed Data within the Graph Does Not change to match the changes within the procedure.
I have attempted this with a pie chart, a bar and column charts with the same affect.
I have searched the web, printed out 4 different examples on how to make this work and still it is hit or miss. I still can not get the legend to show up, either in the preview or the within the Crystal Reports. When I preview the graph before adding the Crystal Report Data Consumer connections, it does work.
Please someone tell me, What am I missing here ?
Thanks in advance for your help.

http://www.****************/Tutorials/BI/Xcelsius/Index.htm
http://www.resultdata.com/Company/News/Newsletter/2008/aug/Articles/Xcelsius/Using%20the%20Xcelsius%20Crystal%20Report%20Data%20Consumer.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10161e25-c158-2c10-3086-ad502098b36b?QuickLink=index&overridelayout=true
http://codesforprogrammers.blogspot.com/search/label/How%20to%20suppress%20blank%20row(s)%20in%20detail%20section%20of%20the%20report%3F
http://www.businessobjects.com/pdf/product/catalog/crystalreports/cr_xc_integration.pdf

Report data inconsistency

Hi All,
I have created one logical fact table by combining two physical fact tables, this new logical has complex join with all the required dimensions. When I create a report based on this new measures and dimensions, data is not showing in the report even though there is data in the database. I ran the query generated by the Siebel Analytics engine the query returns data but its not showing any data in the report. I am working on Siebel Analytics 7.8 version. Any help would be appreciated on this.
Thanks,
Ravi

Check the CE3xxxx table. Are the number of records the same from PRD and QA? If no, then data is missing. If yes, then the report could be the source of the problem.

Please help: User cannot see webi report data

Hi,
I've got a wired problem here in my webi report. Basically I am located in Singapore and produced a webi report for our user in UK. The report looks totally fine with all the data shown correctly. But when our report user logged into the dashboard from UK, she could only see partial data and some of the information are missing(blank cells in the report).
To verify the cause I've done the following test:
1. I remote control her computer and log into dashboard using my account, the result is I get same problem and I cannot see some of the data.
2. I let her remote control my pc and log into dashboard using her account, she no longer has this problem and can see complete data.
We use same version of IE, same JAVA version. And the report data is not time sensitive, so different time zone might not the possible cause.
This problem is killing me. Can anyone please help and let me know any possible solution? Thanks so much.
Edited by: Sinsin Tan on Jul 14, 2010 5:59 AM

Hi Sinsin, what version of BusinessObjects are you using? Is it XI 3.1?
I don't know if it is the same problem or not, but I have seen that before when a user cannot view the data, change the font and/or background color and the data becomes visible. Reinstalling the client fixed that problem. If you couldn't figure out the root cause, you might want to consider this option.
If you are using the BusinessObjects tool, you should join [ASUG|www.asug.com]

Parts of the Data went missing when linking two data sets

Hello Everyone!
I have two data sets for my report:
1. an essbase cube which is transformed to a relational star shema transformed by BI Administraion, Im calling the cube with sql (not mdx)
2. a single relational table
In the report Im iterating on the 'product' dimension of the cube and I need to join the cube with the single relational table, because that table holds all the detailed information on each product (mostly text therefore it is not in the cube).
What I did was, joined the two data sets with a Master/Detail link. So far so good. But the thing is, more than half of my data goes missing in the xml-Output when I join those too. If I delete the join, all the data is back again in the xml-ouptut but I cant refer to the details of the relational table.
I tried different things to fix that problem. So I sorted the 1. dataset and joined it again with the 2. dataset. As a result there was still a lot of data missing, but not the same as before.
I find this behaviour really strange and don't have a clue what to do differently.
I would really appreciate some help, because I already spent hours trying to fix that problem.
Thank you!
Edited by: 981323 on 27.02.2013 06:49

Thanks for that. Typically I found this 5 minutes after I posted the request on the forum.
Problem is every time I try and do this the system does not recognise my <?for-each> containing the parameter and says the parameter is not defined. WHen I validate the template it seems to ignore the F completely and complains about to many ends.
I just can't see why it does not work. I am using four records, 2 of each set I am using which link over item number. I can show them seperately but as soon as I add the variable loop ( <?for-each:/INV_GL/GL[GLLITM= $ITM]?> where ITM is my variable and GLITM is that field in the data) it stops working.

Master Data is missing for Specified Matierials at cube level !!

Hello Experts,
Good Day..!!
I have been facing an issue in my project, Master Data is missing for a KF and values are not displayed in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
Intially, i checked from Cube End and found the issue is in Cube level only.
For that in the data flow, i already checked whether the data has been loaded perfectly or not.
Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
Kindly advice how can i move further..
Thanks,
SN.

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Can not report data thru PI sheet

Dear Gurus,
I have configured basic PI sheet.
I have selected few characteristics like start date, end date, qty to be confirmed...
I can see PI sheet in CO58/CO60. But the characteristics are not editable. How can I report the data using PI sheet?
System copied standard data in PI sheet and this is not editable. How can I change this.
I don't know but if this information helps you to understand the problem
Process instruction type : 1
characteristic : PPPI_START_DATE, PPPI_END_DATE, PPPI_YIELD_TO_CONFIRM
Do let me know if any further information is required to understand and resolve issue.
Thank you in advance.
Regards,
Himanshu

Thank you Dhaval/Ratan,
Basically I want to report data (eg consumption) using PI sheet... I have used process instruction type 2. I've selected process instr. category in O12C and click on PI assistant, on next screen i chose simple data request -- message category to be used PI_CONS -- select input/output for characteristics -- specify text for characteristics -- on next screen for characteristics with processing as 'Input' i've selected variable and finaly when I click on ABAP list.. it displays me a PI sheet.
The same process instr. category has been assigned in recipe. At the time of order release, i've activated automatic control recipe generation. But still at the time of release I am not able to generate control recipe. and system is giving above mentioned error message?
Am i missing something?
I want to report data using PI sheet.. Please guide how can I do the same. If the above mentioned config is not correct, please suggest how to go about it?
Regards,
Himanshu

REPORT/PROGRAM statement missing.

Hi,
I have a report with two includes. In both the Include Programs,i am getting a error message 'REPORT/PROGRAM statement missing, or program type is I (INCLUDE).'
Eg.
Report reportname. " program type Report
include program1.    " program type Inlude
include program2.    " program type Inlude
start-of-selection.
Please Help.
Thanks & Regards,
Jayapal.

Hi ,
This will not be any problem Jay. Since it is a Non executable program it will always show that error. You can activate the program.
Do one thing create a test report program and call this include program in that report and execute. It will show you the result.
I've created an example program for this, please have a look
My Report Program :
REPORT ZTEST.
INCLUDE ZTESTINCLUDE.
My Include Program :
*& Include           ZTESTINCLUDE
data : a type i,
       b type i,
       c type i.
a = 3.
b = 2.
c = a + b.
write : / 'Result is :' , c.
Try executing the Report it will show you the result 5. Tell the client this is not a problem. Check in the attributes of your Include program ( program1 ) if it is of type Include.
Regards,
Sai

COPA Report Data Inconsistency

We have our QA box refreshed with PRD Box. So the data in the two systems is same. I have created summarization level for COPA report Ke30 because report is taking too long in PRD as data comes directly from segment levels.
The numbers for the basic report in QA that are coming from the summarization levels do not match with the numbers of basic report in PRD. While these numbers were matching when summarization level was not used in QA. But these numbers match when I go to the line item level for the brands etc.I am unable to find why the numbers at the basic report level does not match. Any help is greatly appreciated.

Check the CE3xxxx table. Are the number of records the same from PRD and QA? If no, then data is missing. If yes, then the report could be the source of the problem.

Report Data Pane missing

Similar Messages

Maybe you are looking for