Report Definition - SQL literals not visible

RDBMS Version:: 8.1.7.3.0 64bit
Operating System and Version:: HP-UX 11.00
Product (Oracle Enterprise Manager
Product Version:: 9.0.1.0.0
OEM Console Operating System and Version:: HP-UX 11.00
Report Definition - SQL literals not visible
When I create or edit a report, under the tab "Parameters" I key into the SQL box. As I key the code is visible except for any literal that I enter. Only when I hold the Shift key over the line of code is the literal visible and even then it is not possible to edit.
Any ideas, suggestions welcome
Steve

Similar Messages

Drill from Financial Report to SQL Spreadsheet not working

Has anyone had any experience with getting a Financial Report [or Web Analysis OLAP Report] to drill to a Web Analysis SQL Spreadsheet? The Financial Report uses the SQL Spreadsheet as related content. The SQL Spreadsheet does have the column mapping setup to match Essbase Dimensions to relevant relational columns. The financial report does link to the SQL Spreadsheet but the POV criteria does not pass as the where clause when the SQL Spreadsheet opens up. Any ideas would be greatly appreciated.

Hi,
Not sure if this is a bug or just an unlucky constellation...
I had the same (or similare) issue with a new installation of 4.1 (after removing 4.0)
Before you run these two scripts again
apex_epg_config.sql (it will call apex_epg_config_core.sql)
apxldimg.sql
open these two files and put the prefix of "APEX_040100." to all calls to wwv_flow_utilities
apex_epg_config_core.sql
apxldimg.sql
So that all these calls looks like APEX_040100.wwv_flow_utilities ....
Run the scripts as SYS again.
Also check if your public apex user is not locked and has a valid password.
Also check whether your XDB user is not locked (I had this problem, however no idea what could have caused it)
Andre

Custom report definition file (.rdf) not working in release 12

I have created a custom report XXX_VENDORS.rdf and uploaded to the server. While executing the concurrent program, it asks for XXX_VENDORS.rep file. How can I execute an .rdf file in Release 12?

While executing the concurrent program, it asks for XXX_VENDORS.rep file.rdf files should work with R12. The CM would ask for the .rep if it could not find the .rdf file. Please make sure you have uploaded the file to <PROD>_TOP/reports/<lang> directory.

Own report type (RRI) is not visible in Ta. RSBBS

Hallo all,
when I try to implement the BAdI RS_BBS_BADI in the ERP target system according to help http://help.sap.com/saphelp_nw70/helpdata/en/45/e6caeadaf96976e10000000a1553f6/frameset.htm , the then created "Own report type" isn't shown in the appropriate drop down box in BW Ta. RSBBS . We want to realize with it a RRI to SAP-GUI via method IF_RS_BBS_BADI_HANDLER~CALL_SAPGUI under BW 7.3.
I wonder if the implemtation of inteface IF_RS_BBS_BADI_HANDLER has to be replicated from ERP to BW?
Any hints are welcome!
Best regards, Martin

Hi. I tried it, but it did not help. :(
It is strange. Before I had the error in log:
Unable to rename '/appl/ucm_cluster/server/weblayout/resources/schema.work' to '/appl/ucm_cluster/server/weblayout/resources/schema' while publishing schema.
When I looked into the 'schema' dir there was old doctypes in js file
In 'shcema.work' which was supposed to be renamed to 'schema' there was my correct document type in js file.
Now in /server/weblayout/resources/schema/views/doctypes/all.js file there is only my correct document type but i still have in gui the old wrong doctypes! :(

Load_sample.sql file not visible

Hi buddies,
I just downloaded the Oracle Express Edition tutor from here:
http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm
Also I have Oracle Express Edition installed. I also have Oracle Application Express but don't know how to deal with it......At some stage in the tutor it teaches how to first upload a sql script and then how to run it. In our case the script is "load_sample.sql"...I am practicing the tutor on Oracle Express Edition....I found the the file "load_sample.sql" in the tutor directory it self....I was able to successfully upload the file....But when I try to run it...it shows nothing....So I am not being able to see and hence not being able to run it....However I am being able to open the same file in notepad and it does contain some SQL statements......I am using Windows Vista.....Please help me in running this script....

@ Madrid........Exactly...I did the same........Even I was able to upload the script.......but script is invisible.......i.e. when it gets uploaded and I try to run it.........It shows a blank screen.......and I am not able to run the script.......Has it some thing to do with Windows Vista........Sir u just kindly let me know whether u r being able to run that script or not.........thanx in advance........

SQL Expression Fields button not visible in Field Explorer

Hi,
On my Crystal Reports installation I can see the button SQL Expression Fields in Field Explorer but it is not visible on client's installation.
How do I make it visible? I need to create a new report with SQL query for client.
Thanks,
Ajay Audich

Commands are intended to replace the standard linked tables that must users are accustomed to.
I suppose Commands would be considered an "advanced" feature, considering that they require the developer to be able to hand write SQL (our at least copy it from another SQL editor).
If you are comfortable writing reading, writing & editing SQL, Commands will open a the door to a whole new level of control when it comes to creating your data sets.
The biggest problem w Commands is also it's greatest strength... If you're using a Command, CR will assume that you know what you're doing and will not try to rewrite or optimize your SQL in the background. You write it, CR sends it. That means if you write crappy SQL, CR will send your crappy SQL to the db server...
It also means that you can use join types that aren't available in CR and use sub-queries in in your SQL... Basically anything you can do in the db's native editor.
HTH,
Jason

PowerView report not visible in Excel web App

Created a report using PowerView in Excel 2013 but it is not visible when i am viewing in Excel Web App?
Is there any settings we need to enable?
Kindly suggest.

Good question. This is something that's really hard to find an answer to in the docs. But as far as I can tell, you need SQL 2012 sp1 Enterprise or BI edition. Also, SSRS will have to be installed and configured in SharePoint integrated mode. Also, Excel
services will need to be configured to be used, not Excel Web apps.
For me, part of the confusion comes from the fact that there are actually several versions of Power View, and the docs are not always clear which version they're referring to, so my answer might be wrong.
Supporting links:
Excel 2012 sp1:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
Enterprise or BI, SSRS in Integrated mode: http://technet.microsoft.com/library/cc645993(SQL.110).aspx
Excel services, not Excel Web apps:
http://office.microsoft.com/en-us/excel-help/power-view-in-excel-on-office-365-or-in-sharepoint-server-HA103276078.aspx?CTT=5&origin=HA102835634
Mike G.

XML Publisher report definitions not opening

Id like to reimport all the XML Pub Report definitions into my PS instance.
I have a PT 8.49 instance and whenever i click on the report definitions of the XML publisher i get this JAVA error:
"Java Exception: java.lang.NoCl assDefFoundError: com/peopleso ft/pt/xmlpublisher/PTRTFPocess or: finding class com.peopleso ft.pt.xmlpublisher.PTRTFPocess or (2,725) PSXP_ENGINE.RTFProc essor.OnExecute Name:generate XSL PCPC:239 Statement:9 Called from:PSXP_RPTDEFNMANAGE"
SCREENSHOT: http://imageshack.us/photo/my-images/4/al4q.png/
I was thinking maybe I could export the report definitions from a working instance and import here. Does that seem like a solution that will work

PSXPCLEAN isnt part of PT 8.49
So i tried instead to migrate XMLP definitions using Application Designer from a working instance of PS CS.
But there error is still the same:
"Java Exception: java.lang.NoClassDefFoundError: com/peoplesoft/pt/xmlpublisher/PTRTFPocess or: finding class com.peoplesoft.pt.xmlpublisher.PTRTFPocess or (2,725) PSXP_ENGINE.RTFProcessor.OnExecute Name:generate XSL PCPC:239 Statement:9 Called from:PSXP_RPTDEFNMANAGE"
Notice the underlined part.
In the working instance it is "PTRTFProcess" not "PTRTFPocess"

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

Data loaded in Infocube is not visible in the Reporting

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and select All Elementary Tests in the dropdown ->Transaction data , select the Consistency of the Time Dimension for an InfoCube and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh..

Hierarchy in properties of characteristics item is not visible in report

Hi,
It has been observed that the Hierarchy name in u201Cproperties of characteristics" of an infoobject for example 0GL_ACCOUNT is not visible in BEx output report. The report shows complete hierarchy with all nodes / subnodes but NOT HEADER description!
Also whenever you change the hierarchy (by changing global / local view), Same problem exist.
This is one of the high priority problem users are facing since they canu2019t see hierarchy name (Key / Text) causing confusion.
Please advice.
Thanks and best regards
Rajendra

Make a duplicate header above all the levels and show text in the BEx output
Level 1 -> Hierarchy name -> Level 2 ( Initially Level 1) -> Level 3 ( Initially Level 2)

Print button is not visible in RDLC report

hi
I am developing web application in Visual studio 2012 ,.net framework 4.5,C#.net
I have designed RDLC report for web application,in report viewer i have given showprint button = true, in browser print is not visible in all the browser.
How should i give Email functionality in report,is there any sample code for email.
How to overcome the above two problems,print and Email
<rsweb:ReportViewer ID="ReportViewer1" runat="server" Font-Names="Verdana" Font-Size="8pt"
InteractiveDeviceInfos="(Collection)" WaitMessageFont-Names="Verdana" WaitMessageFont-Size="14pt"
BackColor="#CCCCFF" ShowPrintButton="true" ShowPageNavigationControls="True"
ShowBackButton="True" ShowCredentialPrompts="True" ShowDocumentMapButton="True" ShowExportControls="True"
ShowFindControls="True" ShowParameterPrompts="True" ShowPromptAreaButton="True" ShowRefreshButton="True" ShowZoomControl="True" >
<LocalReport ReportPath="Report1.rdlc" >
<DataSources>
<rsweb:ReportDataSource />
</DataSources>
</LocalReport >
</rsweb:ReportViewer>
Thanks&Regards,
Radhika

Hi Om Prakasah,
If I understanding correctly, you created a ReportViewer report, but you can’t see print icon when you run the report in browser. If so, please follow these steps:
If you can’t see the print icon either when running the report in visual studio, you may have set ShowPrintButton to False in Properties window, then please set it to True.
If there is print icon in visual studio but not in browser, please update the .NET Framework on your web server to the latest version, because the print icon is by default hidden in some version of browser. For more information, you can refer to the relevant
link below:
http://blogs.msdn.com/b/selvar/archive/2013/12/20/reportviewer-2012-control-not-showing-print-icon-when-viewed-from-ie-11-desktop-mode.aspx
If the problem is not resolved, i would appreciate it if you could give us detailed description of your problem, it’s better to provide the version of ReportViewer and browser, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

An error occurred during local report processing.The definition of the report '' is invalid.The definition of this report is not valid or supported by this version of Reporting Services. he report definition may have been created with a later version of R

Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
  m_fields = NewArrayList()
  Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
      m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
  Next i
  'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
  stream = File.OpenWrite("D:\MyTestReport2.rdlc")
  Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
  ' Causes child elements to be indented
  writer.Formatting = Formatting.Indented
  ' Report element
  writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
  writer.WriteStartElement("Report")
  writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
  writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
  writer.WriteStartElement("ReportSections")
  writer.WriteStartElement("ReportSection")
  writer.WriteElementString("Width", "11in")
  writer.WriteStartElement("Body")
  writer.WriteElementString("Height", "5in")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Tablix")
  writer.WriteAttributeString("Name", Nothing, "Tablix1")
  writer.WriteElementString("Top", ".5in")
  writer.WriteElementString("Left", ".5in")
  writer.WriteElementString("Height", ".5in")
  writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
  writer.WriteStartElement("TablixBody")
  ' Tablix Columns
  writer.WriteStartElement("TablixColumns")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixColumn")
      writer.WriteElementString("Width", "1.5in")
      writer.WriteEndElement() ' TableColumnNext fieldName
  writer.WriteEndElement() ' TablixColumns' Header Row
  writer.WriteStartElement("TablixRows")
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
      ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", fieldName)
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      'writer.WriteElementString("Value", fieldName)
      writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow
  writer.WriteEndElement() ' TablixRows'End of Details Rows
  writer.WriteEndElement() ' TablixBody
  writer.WriteStartElement("TablixRowHierarchy")
  writer.WriteStartElement("TablixMembers")
  writer.WriteStartElement("TablixMember")
  ' Group
  writer.WriteElementString("KeepWithGroup", "After")
  writer.WriteEndElement() ' TablixMember' Detail Group
  writer.WriteStartElement("TablixMember")
  writer.WriteStartElement("Group")
  writer.WriteAttributeString("Name", Nothing, "Details")
  writer.WriteEndElement() ' Group
  writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixRowHierarchy
  writer.WriteStartElement("TablixColumnHierarchy")
  writer.WriteStartElement("TablixMembers")
  'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
      writer.WriteStartElement("TablixMember")
      writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixColumnHierarchy
  writer.WriteElementString("DataSetName", "tbdataset")
  writer.WriteEndElement() ' Tablix
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' Body
  writer.WriteStartElement("Page")
  ' Page Header Element
  writer.WriteStartElement("PageHeader")
  writer.WriteElementString("Height", "1.40cm")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Textbox")
  writer.WriteAttributeString("Name", Nothing, "Textbox1")
  writer.WriteStartElement("Paragraphs")
  writer.WriteStartElement("Paragraph")
  writer.WriteStartElement("TextRuns")
  writer.WriteStartElement("TextRun")
  writer.WriteElementString("Value", Nothing, "ABC CHS.")
  writer.WriteEndElement() ' TextRun
  writer.WriteEndElement() ' TextRuns
  writer.WriteEndElement() ' Paragraph
  writer.WriteEndElement() ' Paragraphs
  writer.WriteEndElement() ' TextBox
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' PageHeader
  writer.WriteEndElement() ' Page
  writer.WriteEndElement() ' ReportSection
  writer.WriteEndElement() ' ReportSections' DataSources
  writer.WriteStartElement("DataSources")
  writer.WriteStartElement("DataSource")
  writer.WriteAttributeString("Name", Nothing, "tbdata")
  writer.WriteStartElement("DataSourceReference")
  writer.WriteEndElement() ' DataSourceReference
  writer.WriteEndElement() ' DataSource
  writer.WriteEndElement() ' DataSources'DataSet
  writer.WriteStartElement("DataSets")
  writer.WriteStartElement("DataSet")
  writer.WriteAttributeString("Name", Nothing, "tbdataset")
  writer.WriteStartElement("Query")
  writer.WriteElementString("DataSourceName", Nothing, "tbdata")
  'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
  writer.WriteElementString("CommandText", Nothing, "TableDirect")
  writer.WriteEndElement() ' Query'Fields
  writer.WriteStartElement("Fields")
  ForEach fieldName In m_fields
      writer.WriteStartElement("Field")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      writer.WriteElementString("DataField", fieldName)
      writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
      writer.WriteEndElement() ' FieldNext
  writer.WriteEndElement() ' Fields' rd datasetinfo
  writer.WriteEndElement() ' DataSet
  writer.WriteEndElement() ' DataSets
  writer.WriteEndElement() ' Report' Flush the writer and close the stream
  writer.Flush()
  stream.Close()
  'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
  Dim ms AsNewMemoryStream(myByteArray)
  'Supply Stream to ReportViewer
  ReportViewer1.LocalReport.LoadReportDefinition(ms)
  ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?

Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races

New objects not visible in report objectpicker

Hi, I'm new to SCOM so please forgive me if I say something wrong.
We are using SCOM 2007 R2.
In Operations Console I've created 2 new Web Applications in Authoring view.
In Reporting view I open Availability report from Microsoft Generic Report Library
Click Add Object
Search for Web Application I've created and get nothing
For some reason I see only old objects when search or view all available in report. I tried to use old Management Package and created my own (I thought the problem was in sealed MP, but my new is unsealed). Found similar problem in "Missing Objects
in Report Objectpicke" question, but we have less than 100 monitoring agents.
So I have no idea why objects are not visible, could you please help?

Verify from Group {contain all computers that you want} that using in Reporting.
You also check below link, it's similar issue
http://social.technet.microsoft.com/Forums/systemcenter/en-US/5cb0fb12-73c5-4553-987f-ea415babd876/missing-objects-in-report-objectpicker?forum=operationsmanagerreporting
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Default values for static report parameters are not visible when scheduling

Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

Hi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick

Report Definition - SQL literals not visible

Similar Messages

Maybe you are looking for