Report Designer drill down issue

Hi Friends,
I am having an issue with report designer.When i run the report designer the characteristics are getting displayed in drill down form for each row of values.Is there any way to restrict this. i want to display the header part in tabular view.
Thanks in advance.
Mandadi.

Hi Srikanth,
In Report designer output i'm getting the header part as drill down which i dont want.
i want the output in the following format
header1        header2          header3       value
xxxx             abc                efg                10
yyyy             cfg                 tre                20
but i'm getting in the drill down format as follows
xxxx
abc
efg           10
yyyy
cfg
tre           20
Thanks
Mandadi

Similar Messages

  • REPORT PAINTER DRILL DOWN REPORT

    Hi,
    i need to develop report painter report with drill down for cost elments and month wise
    out should be cost elements and all months
    Please suggest how to use drill down
    Thanks and Regards
      RAVi

    Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This  report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
    Mark

  • What is the difference in Interactive reports and Drill down reports?

    What is the difference in Interactive reports and Drill down reports? Are they same?

    Hi FRD ,
    Both are same .
    as far as i know there is no difference .
    bye .

  • How to insert "%" into the report figure in report painter/ drill down

    Please kindly advice how to insert "%" in the calculated amount in the report painter/ drill down report. 
    Thank you
    Sirirak

    Hi,
    Create a text variable (for query name, option available in query properties).
    Processing Type would be Replacement path, replace with variable.
    Give the variable name created for the selection box characteristic in 'Replace with variable' option.
    This would replace value of the text variable with the user input value.
    Hope this helps!

  • IE7 Drill down issues

    Hi All,
    we are having problems in disco viewer regarding the drill down issues when uisng the IE7, and i installed Jinitiator 1.3.1.26 and 1.3.1.28 and followed the following procedure based on the research i have done but still no results.
    In IE7:
    Tools, Manage Add-ons, Enable or Disable Add-ons
    Show: Add-ons that have been used by Internet Explorer
    Click on "shockwave flash object(flash9e.ocx)"
    Click Disable, Okay
    Restart Internet Explorer
    Please any help will be great.
    Thanks

    If you are going to go through the effort to apply 10.1.2.2 patchset, then you might as well apply 10.1.2.3 patchset (the patchsets are cumulative) and the latest Discoverer cumulative patch. The issue is fixed there as well.
    Note 237607.1 ALERT: Required and Recommended Patch Levels For All Discoverer Versions
    There was a one-off patch that only supplied a new javascript file (BIPopupMenu.js) for the version you are on. That would be a quick fix, but again I would recommend the latest patchset to avoid many other issues you may face on this version.
    Regards,
    Steve.

  • IE7 Drill down issue

    Hi
    I'm using discoverer
    OracleBI Discoverer 10g (10.1.2.2)
    Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25)
    Did any one come up with a solution for the "drill down issues when using IE7" ? I have tried the patchset in the forum but of no use.
    Thanks again

    Hi
    Are you using Java or Jinitiator and which version? Do you have other users on IE7 who are able to run ok? Then you might want to look at the operating system. Are we talking XP or Vista?
    What we need to do is rule out various causes one by one. Then if all else fails you should raise a service request with Oracle.
    Back in 2007 I posted something about drilling and IE7 on my blog: http://learndiscoverer.blogspot.com/2007/03/discoverer-and-ie7.html
    Here is the gist of that post: It seems Oracle have released a patch (5758865) , available on MetaLink, with the fix for IE7. This is a one-off patch and requires a password which means you will have to raise a service request and tell Oracle you are having trouble drilling in Viewer when using IE7. This patch is applicable whether you are using relational or OLAP modeling. The downside of this patch is that it can only be applied on top of 10.1.2.2. You can get the 10.1.2.2 patch (4960210) also on MetaLink. Be warned though that 10.1.2.2 is not a small patch. It is 1.6 GB in size and is a full upgrade of the 10.1.2.0.2 application server.
    Is this one of the patches that you tried?
    Best wishes
    Michael

  • Drill down issue in report painter report

    Hi-
    We have an issue where the drill down in one of our report painter reports isn't working.  When the user tries to drill down, it says the list contains no data.
    However, if the target report (of the drill down) is run first, and then the report painter report is run, the drill down will then work properly.
    We need to know where to check to get this fixed.  It has us stumped.  The report painter report is associated with a report group.   
    Thanks,
    Kevin

    Just needed to update the variant from the calling program's report group.  Duh.

  • BEx analyzer don't work move columns in report (like drill down)

    Hi
        I have an issue on BEx Analyzer...    When I built one report... add some characteristics and soo on... but then I need to move the order of columns... then I try to drill down.. or move to order of column... It doesn´t work,
        I did this function before.. when the poin of the mouse it's convert with other draw... like -->
                                               <--
        But this time it's not possible...
        Then If I press the icon that say design mode... I saw that the option of navigation is active... and when I close the design mode... the functionality of move columns work...:(
        It's difficult that each time that the user need to move columns in Bex will go to design mode... just for activate.. 
        I know thta we have some function on context menu.. for move columns one by other... but not for certain position..
        Could you help me please?
        I will appreciate your help and I will assign points for your answers.
    Alice

    Hi Alice,,
    This happens some time, when i am unable to drill down by just dragging and dropping the columns. though i could not find out why. Best thing, what i do, i refresh the query and next time it works Ok.. and other th ing what you can do, right click, on the characteristics list on the left pane, go to "change drilldown", then " drill down by" there the user can select the option he is looking in for.
    Hope this helps.
    Shakeel.

  • Cash Management Report FF7B - drill-down from planning levels to AP/AR OIs

    Hi
    I'm configuring cash management and have created all planning levels and groups needed.
    All master data, ie GL accounts, vendors and customers, have the correct planning level or group.
    I've created all the groupings etc that I need.
    I'm running the reports FF7A and FF7B. I have two questions and problems.
    1. When running the Liquidity Forecsat for customers and vendors I drill-down to the standard PL or SL planning levels for AP and AR postings respectively. Then I drill into the planning groups correctly  (E1-E9 and R1-R8). But when I try to drill into the cash management detail records  (or is it the AP/AR line items?) I get "Memo Records: List - List Contains No Data". This happens every time. Should I now see the AP or AP line items? Or should I see some cash management memo records? I have deleted all the cash management data several times and recreated but I still get this problem  (using reports RFFDDL00 and RFFDKU00)
    When I do the same for purchase orders, purchase requisitions or sales orders I see a Memo Records List which agrees with the previous planning level total and I can then drill into the actiual POs, PRs or SOs from this list without an issue.
    2. When running the Cash Position and I do the drill-down to the GL Line Items, I get an enormous list which does not just show the total of items at the previous planning level. Why is this please? Example: a bank account with a balance of £2,000  (shown on the panning level) but with 000's of line items totalling say £5m. Again I have deleted the CM data and recreated but without any improvement to the problem.
    Any help anyone can give me with these issues will be very much appreciated.
    Thanks.
    Wayne

    Hi
    I have the same trouble with Tcode FF7B.  There´s a message "Memo Records: List - List Contains No Data"; bit in the TcodeFF7A, it runs OK.  The message appears just witn Tcode FF7A.
    Also, There´s all TR data in tables FDSB for GL accounts, FDSR and FDFIEP for customers/vendors.
    Can you help me??  can you solved this issue?
    Tanks for your Help

  • Inconsistency in upper level report and drill down report

    I have to reports:
    1) Higher level report pulls data against customers and shows aggregated data for all promotions for that customer from a table A.
    2) Lower level report pulls data from the same table A, but for all promotions against a customer after i drill down on a Customer.
    However, the values of a measure when summed up for a customer in the higher and lower level reports, does not match sometimes. Sometimes its in sync, sometimes its not.
    My Oracle BI servers are 2 in no. with clustered configuration. Can this be an issue related to caching of measure values? If not, please give me pointers in other directions i can look.

    clustering is not a problem here....just check for some example...and do some unit testing to find the rootcause of mismatch..it might be including some some extra values..

  • Integrating BI reports (with drill down) in EP

    Hi All,
    We want to integrate some BI reports in EP. What we want to achieve is:
    Display a graph (eg indicating sales revenue) in the iView
    Upon user click, drill down the report to view by various criteria.
    Would appreciate if anyone can provide tips on how to achieve this. Ive been contemplating on whether to use VC etc.  My apologies for not being so specific as im unfamiliar in the BW arena. Thanks!

    Hi,
    Once you've created the BW query, report or template in your Web Application Designer you can create a Bex report portal iView on top of it using the iViews templates.
    Read <a href="http://help.sap.com/saphelp_nw70/helpdata/en/bd/3d1640d4642402e10000000a1550b0/frameset.htm">this general info</a> on how to Display Content from BI in the Portal and <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm">here</a> about the Bex iView in specific.
    Hope it helps,
    Roy

  • Viewing reports with Drill Down option

    Hi all, here is the complaint that we received:
    Please try to find a means to help!
    When I’m in my Report and when in an account and I go to a deal to alter or look at it, when I return to reports I always am driven back to the top of the report file. If I’m in December and looking at the entire year I have to go through all accounts once again to get to the same starting point. A great irritant. I can’t help but think that there is a better way.
    Anyone know if this can be changed? Thank you in advance!!!

    Sorry, let me explain...
    The problem isn't with the report, they have issues with what happens after you drill down into the account from the report and go back to the report.
    When they go back to the report after adjusting the account/opp it doesn;t go back to what they were looking at, the view will go to the top of the report. Say they were looking at Account #100 out of 250 (250 total accounts in the report), if they drill down into account 100 and then go back to the report they will be taken back to account #1.
    Is that more clear?
    What they want is to be able to go back to the view of Account #100.

  • Calling drill through report using drill down hierarchy

    I am using drill down hierarchy and i want to open a report in the same heirachy using drill throught aswell, how it is possible?
    I try it by using Action link but it is not filtering the data ,for instance i am clicking on 'item A', but it is giving me 'item B' & 'item C' aswell on the preceding report level.
    Please consider this issue.
    Regards,

    Yes I prompted that column on the detail report but showing same thing..

  • Webi Drill down issue - SQL AS

    Hi Guys,
    Did anyone encounter the following issue?
    There are 4 dimensions(one of them is Date) and 1 measure in my Webi Report.
    When I drill down from one measure to another, the SUM of that measure will not the same with its upper Level.
    For example, Level 1 is:
    Country   total sales
    China       1000
    Then drill down to Level 2:
    Region  total sales
    North    100
    South   200
    West    300
    While, the SUM of  total sales of the three region is not equal with China.
    Your help will be highly appreciated.
    Thanks.
    Regards,
    Daniel

    1. Please check your SQL Query gives Country - Region Wise perfects output/result or not..............
    2. Check any Filter is set or not (from info view/edit Query/universe)
    Please check correctly.
    Thanks

  • Hierarchy drill down issue at the lowest level

    Hi,
    In OBIEE 11.1.1.5 I face an issue with drill down to lowest level of presentation hierarchy (expanded by "+" in report). It happens only for combination of 2 dimensions presentation hierarchies in analytics report (parent-child organizational structure + level based product categorization). Aggregated date comes from OLAP but lowest level product information comes from relational database and this details are not displayed.
    First I drill to particular sales rep in organizational structure. Then for that sales rep I need to drill down product hierarchy and it works except lowest level of details. At the lowest level of product hierarchy, query sent to database (I have it from logs) return proper results (checked directly in db) but report behaves the way like there are no details at the lowest level and product details are not displayed.
    Both (Organizational structure, Product) dimension presentation hierarchies works ok at all levels when used separately. Also product hierarchy works well at all levels (including OLAP->relational drill) when used togather with other level-based hierarchies in subject area.
    I am wondering what I could have done wrong...
    Advices are very welcome!

    Hierarchy keys are set properly and "use for display" is checked.
    Dimension presentation hierarchies does not work only when I use particular two hierarchies togather in one report table. When each of hierarchies is displayed separately it works ok.

Maybe you are looking for