Report designer error for hierarchial structure on Columns

Hello,
I have a query with a structure in rows and another one in columns. I also have a 0COMPANY hierarchy Dimension within the Columns.
When I insert the data provider into a report designer report, I receive the following error:
"Query contains a hierarchial structure on Column(s)..."
Has any one encountered this issue before? Is there a note or workaround available?
Thank you.
Sri Yalla

Hi,
the report designer need to have a fixed number of columns. If you have a Hierarchical Structure in the Columns, the number of columns can change. Therefore Report designer does not allow to use this DP in this drill down. You should place the Row structure to the columns and the hier-structure to the rows. then it should work.
best regards,
kai

Similar Messages

Report Designer - error message and variable

Hi All,
Who has already experience with the formatted report (Report Designer)?.
We work with SAP GUI 640.
I have the following problems with the report designer.:
1.) If I even execute the report designer, I receive the following error message:
<b>Web Item Report Error
       Error while processing the dynamic report section with the name " REP_TEST_1"
       While processing the dynamic report section with the name "REP_TEST_1", this
       error occured:
       Characteristic SDB2_IO1_F9 not found on axis "ROW" of data
       provider "SDB2_IO1"</b>
I`ve already checked the Query and the InfoSet on this the Query was built. There are no mistakes! The InfoObject is in the row.
With 2 other ones new defined Queries I receive the same error message, only with another info object.
2.) If I executing the report designer not all variables are available.
     How can I change this?
I`m thanks for every information and hope that Somebody can help me.
regards,
Wolfgang

Hello Nagesh,
1.) yes, I have one structure in the column.
2.) That`s right what you say. This tool is very tricky!
     I`ve never changed the query. If I executing the report designer there show me one
     variable, but I have defined four in the query.
     So, what can I do to solve this problem?
Thanks for your help.
Best regards,
Wolfgang

Report Designer - Error while opening a saved report

Hi,
I am not sure if this is an authorization issue or configuration issue.
When I try to open a saved report on Report designer, I keeping getting an error: Report Version is invalid: "0".
Has anybody faced similar problem?
We are on SP09.
Regards,
Payal.

Payal,
I am afraid, that your report might be corrupted. This might have happened, if in tx SE16 the version is changed. The Report XML displayed in SE16 for table RSERDATA, is limited to ca. 1024 charachters. When editing the version, after pressing the save button, the Report XML is cut off at 1024 charachters and the report is lost.
Please do not set the report version in tx SE16!
I will need to configure the program RS_REPORT_MAINTAIN, such that reports with version "0" can be saved with the minimum version 9.0.
Until then I recommend the following procedure for Reports that are ok, but have the Version "0" bug:
1) in tx SE38, program: RS_REPORT_MAINTAIN
    open your report with option "DT" (designtime)
2) Switch to Edit mode.
    Make a backup copy of the report using the "Save As" Button.
    You can copy the Report XML to the clipboard using Ctrl-A, Ctrl-C
3a) Open a dummy report in RS_REPORT_MAINTAIN created previously with
      Report Desginer ( --> The version is set to 9.0).
      Switch to edit mode and paste the Report XML and Save.
or
3b) Debug FUNCTION rs_bex_report_load_rfc.
      Open a report and change the value of E_REPORT_VERSION to "9.0"
      before leaving the function.
Hope this helps, karim
P.S.
I will update note 1016224

Bex Report Designer: Error while loading metadata

hi experts,
I am working with BI7 Bex Report Designer and we are using SP9. when i tried to load the Query in Report Designer its giving below error.
Error while loading metadata.
Check the Query and portal settings.(but the query is working fine in Analyzer).
and its giving message class RSBOLAP, message number 018 and Description is java system error: incoming call is not authorized.
when i double click the error its giving below error details.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
could you plz suggest me how to rectify the problem.
regards
vadlamudi

Hi vadlamudi
The error message RSBOLAP 018 means, that the ABAP stack can't communicate with the Java Stack.
1) Please ensure, that the user, used for the Report Designer, is valid in the Portal too. Depending on the user management setup this means that there either needs to be the same user or an assigned user in the Portal.
2) In case the user is valid, it means a basic misconfiguration according to note 937697. In this case please run the Support Desk Tool and ensure, that all checks are green. Please ensure, that the latest version of the Support Desk Tool is used.
Regards,
Janine

Report designer error message

When inserting the data provider while starting the Report Designer, we get the following error message:-
"RSBOLAP: 018 Java System Error timeout during allocate......"
Can someone please tell us what this means and how to rectify?
Many thanks,
Frederick

please ask your system administrator to set up the ABAP->JAVA and JAVA->ABAP connectivity in a valid way (at least for your user...).
Note 916090 - check this oss as well.
Hope it Helps
Chetan
@CP..

InfoPackage error for Hierarchy data loads after upgrading to BI 7.31

Hi All,
We have recently upgraed to BI 7.31 from BI 7.01. After the upgrade we are observing info package error while loading the Hierarchy for 0BPARTNER infoobject, below is the long text for the error message.
Datasource name : 0BPARTNER_NAME_HIER
Error in the hierarchy structure: see error log
Message no. RH003
Diagnosis
The structure of the hierarchy contains errors. You can find a detailed description of the error in the log.
Procedure
Correct the error in the hierarchy structure as described in the log.
Screenshot for the Infopackage Details tab,
The error message suggests checking the error log, but there are no error logs to be reffered.
Please let us know if anyone have faced similar issue and help us resolving the same. Also let us know where to find the error log in such scenario.
We have already tried replicating the data source at BW side, but no success. We also checked the extractor at source system side and found it to be working alright.
Thanks & Regards,
Viraj

Hi Viraj,
Did you find a solution for your problem ?
Even am facing the same issue .Process chain is running fine without throwing any errors but if i try to run manually it getting failed.
when we check the data few of the nodes are not getting reflected which are maintained in source.
Error Message : Error in the hierarchy structure.
Source system : Extraction check performed and the record count is matching. We took the dump of data and where able to find the required data but in the maintain hierarchies it is not getting reflected
Could you please help me in the solution.
Thank you
Regards,
Madhav

BEx report designer error

Hi,
When am trying open Query in BEx report designer it is getting below error plz help me to solve this issue.
error while loading query metadata check the wuery and portal settings
RSBOLAP 017 Java communication error : RFC destination NOT_CONFIGURD Does not exist
Thanks,
Medha.

Hi Medha
this is due to two reaso
1 For the system IP there should be open a port
2 May be its a authorization problem check this object is added or not S_RFC
Shashi..

Report Designer - Error when Loading Report

Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
Hemant

Hello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development

Report Designer error i VS 2013 - "Data at the root level is invalid."

Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
  m_fields = NewArrayList()
  Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
      m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
  Next i
  'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
  stream = File.OpenWrite("D:\MyTestReport2.rdlc")
  Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
  ' Causes child elements to be indented
  writer.Formatting = Formatting.Indented
  ' Report element
  writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
  writer.WriteStartElement("Report")
  writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
  writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
  writer.WriteStartElement("ReportSections")
  writer.WriteStartElement("ReportSection")
  writer.WriteElementString("Width", "11in")
  writer.WriteStartElement("Body")
  writer.WriteElementString("Height", "5in")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Tablix")
  writer.WriteAttributeString("Name", Nothing, "Tablix1")
  writer.WriteElementString("Top", ".5in")
  writer.WriteElementString("Left", ".5in")
  writer.WriteElementString("Height", ".5in")
  writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
  writer.WriteStartElement("TablixBody")
  ' Tablix Columns
  writer.WriteStartElement("TablixColumns")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixColumn")
      writer.WriteElementString("Width", "1.5in")
      writer.WriteEndElement() ' TableColumnNext fieldName
  writer.WriteEndElement() ' TablixColumns' Header Row
  writer.WriteStartElement("TablixRows")
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
      ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", fieldName)
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      'writer.WriteElementString("Value", fieldName)
      writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow
  writer.WriteEndElement() ' TablixRows'End of Details Rows
  writer.WriteEndElement() ' TablixBody
  writer.WriteStartElement("TablixRowHierarchy")
  writer.WriteStartElement("TablixMembers")
  writer.WriteStartElement("TablixMember")
  ' Group
  writer.WriteElementString("KeepWithGroup", "After")
  writer.WriteEndElement() ' TablixMember' Detail Group
  writer.WriteStartElement("TablixMember")
  writer.WriteStartElement("Group")
  writer.WriteAttributeString("Name", Nothing, "Details")
  writer.WriteEndElement() ' Group
  writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixRowHierarchy
  writer.WriteStartElement("TablixColumnHierarchy")
  writer.WriteStartElement("TablixMembers")
  'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
      writer.WriteStartElement("TablixMember")
      writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixColumnHierarchy
  writer.WriteElementString("DataSetName", "tbdataset")
  writer.WriteEndElement() ' Tablix
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' Body
  writer.WriteStartElement("Page")
  ' Page Header Element
  writer.WriteStartElement("PageHeader")
  writer.WriteElementString("Height", "1.40cm")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Textbox")
  writer.WriteAttributeString("Name", Nothing, "Textbox1")
  writer.WriteStartElement("Paragraphs")
  writer.WriteStartElement("Paragraph")
  writer.WriteStartElement("TextRuns")
  writer.WriteStartElement("TextRun")
  writer.WriteElementString("Value", Nothing, "ABC CHS.")
  writer.WriteEndElement() ' TextRun
  writer.WriteEndElement() ' TextRuns
  writer.WriteEndElement() ' Paragraph
  writer.WriteEndElement() ' Paragraphs
  writer.WriteEndElement() ' TextBox
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' PageHeader
  writer.WriteEndElement() ' Page
  writer.WriteEndElement() ' ReportSection
  writer.WriteEndElement() ' ReportSections' DataSources
  writer.WriteStartElement("DataSources")
  writer.WriteStartElement("DataSource")
  writer.WriteAttributeString("Name", Nothing, "tbdata")
  writer.WriteStartElement("DataSourceReference")
  writer.WriteEndElement() ' DataSourceReference
  writer.WriteEndElement() ' DataSource
  writer.WriteEndElement() ' DataSources'DataSet
  writer.WriteStartElement("DataSets")
  writer.WriteStartElement("DataSet")
  writer.WriteAttributeString("Name", Nothing, "tbdataset")
  writer.WriteStartElement("Query")
  writer.WriteElementString("DataSourceName", Nothing, "tbdata")
  'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
  writer.WriteElementString("CommandText", Nothing, "TableDirect")
  writer.WriteEndElement() ' Query'Fields
  writer.WriteStartElement("Fields")
  ForEach fieldName In m_fields
      writer.WriteStartElement("Field")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      writer.WriteElementString("DataField", fieldName)
      writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
      writer.WriteEndElement() ' FieldNext
  writer.WriteEndElement() ' Fields' rd datasetinfo
  writer.WriteEndElement() ' DataSet
  writer.WriteEndElement() ' DataSets
  writer.WriteEndElement() ' Report' Flush the writer and close the stream
  writer.Flush()
  stream.Close()
  'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
  Dim ms AsNewMemoryStream(myByteArray)
  'Supply Stream to ReportViewer
  ReportViewer1.LocalReport.LoadReportDefinition(ms)
  ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?

Hi RACES,
Based on your description, I'm afraid that it is not the correct forum for this issue, but maybe I could help you find a more appropriate forum.
If it is related to the Visual Studio Report Controls, you could select this forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols
But if it is the SSRS issue, maybe this forum would be better for you:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CRVS2010 Beta - Report Viewer Errors for Crystal Reports in VS 2010

I have a project that was written in VS 2008 targeting the 3.5 framework which contains a ton of Crystal Reports. I recieved my new license for VS 2010 and did the install along with the Crystal Reports for Visual Studio 2010 Beta 2. I converted my project over successfully. I am able to open up the reports on their own. When I try to save them they want to be converted to the new format. This also works fine. My problem is the Crystal Reports Viewer. I am not able to add any reports to the viewer without receiving error messages. I have tried using the 10.5 and the latest version of the viewer, but receive errors everytime that I try to add a report to it. I always recevie the following error:
"Error invoking 'Choose a Crystal Report...'. Details: Invalid Report Source"
I have also tried just creating a brand new report from the Crystal Report Viewer Tasks window. When I do that I get this error:
"Unable to find the report in the manifest resources. Please buld the project, and try again." "Error invoking 'Create a New Crystal Report...'. Details: Unable to find the report in the mnifest resources. Please build the project, and try again."
I have tried changed the framework target to 4.0, but this has not helped. I have tried using the 14.0 versions of the references and the 10.5 versions. I have searched all over the internet for a resolution, but can't seem to find one. Any help would be greatly appreciated.

I am having the same problem. You say make sure all of my assemblies are version 14. Three questions:
1. Now that I have removed all of the old Crystal assemblies from my project, what are the assemblies that I need to add back?
2. My VS 2010 "add references" popup shows me many crystal assembles (Crystal XI is also installed) which ones to I need to install now?
3. If I don't know what they are, or where to find them, how do I determine their version?
You solution reminds me of the old saying "If I had ham, I could make ham and eggs. If I had eggs!"
More information please,
J Rich
Edited by: JosephRich on Nov 6, 2010 5:36 PM
Edited by: JosephRich on Nov 6, 2010 5:39 PM

Report Designer Component for VS2010

Dear All
i have an application built in VS2003 and CRXI. Now i have to update the application using VS and CR 2010, but i come to know that RDC is not available in CR2010. i have to update the application with old functionality that offers the users to design, create and update their report. Can any one tell me the possible solutions so that i can upgrade my system with the previous functionality?

As long as you are using the CR SDK for .NET, the MSM is here:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0_1.zip
MSI 32 bit
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0_1.zip
MSI 64 bit
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_64bit_13_0_1.zip
There is no runtime for the RDC as it is not supported \ licensed to be used in VS 2010
- Ludek

Report design issue for discussion

I'm going to generete several reports using JSP--session EJB,session bean
retrieve database,return result to JSP and show in browser.
I like resultset,but resultset is not Serializable, so can't send one across
the wire.
if I turn the ResultSet into a Vector,send vector to JSP,I'll have to build
diffrent structure classes for each reports.I like the resultset becuse it
seems "consolidate" for diffrent tables
JDBC2.0 provides cachedrowset,but it seems only good for small set of
data,for report,I need to return alot of data
do you have any sugguestions

Suggestion:
Unless you have a good reason, don't use EJB for this.
1) It is non-transactional (probably)
2) It is not distributed (ejbs are probably local)
3) Were it distributed, it would suck (high cost of transmission with
report-scale data)
4) You are fighting something ... if it doesn't seem natural, it probably
aint.
Peace,
Cameron Purdy
Tangosol Inc.
<< Tangosol Server: How Weblogic applications are customized >>
<< Download now from http://www.tangosol.com/download.jsp >>
"John Zhang" <[email protected]> wrote in message
news:3c080711$[email protected]..
I'm going to generete several reports using JSP--session EJB,session bean
retrieve database,return result to JSP and show in browser.
I like resultset,but resultset is not Serializable, so can't send oneacross
the wire.
if I turn the ResultSet into a Vector,send vector to JSP,I'll have tobuild
diffrent structure classes for each reports.I like the resultset becuse it
seems "consolidate" for diffrent tables
JDBC2.0 provides cachedrowset,but it seems only good for small set of
data,for report,I need to return alot of data
do you have any sugguestions

Report Designer error

Hi,
When am trying to Insert Dataprovider am getting below error, Please some one help me
RD revision 7100.0.0205
Internal error ID :E-SELECDATAPROVIDER
Error Message : check :RFC Exception
Thanks,
GAL

Hi Gal Bi,
This is basically an RFC execptio error,,Are u using it for 1st time? if so go to tcode-SICF>execute>collapse all folder for SAP BW,,then c which are dull>then rt click activate. if its displayed in Bold,then it means activated. or try contacting ur BAsis person.
This shud help
Thanks
Assign points if helped

Section format event - Report Designer Component for Crsyatll 11

Hi,
I have been trying to find some sample code for Visual C++ using MFC to try and hook into the format event when a section of the rpt gets rendered. I have looked through all the samples and have not really been able to find anything conclusive.
I basically just need adjust the width and height of the OLE object. If anyone could point me in the right direction or provide some sample code that would be most helpful. Just something how to use an event sink for example?
Thanks in advance, Dene.
PS this might not be in the right forum, there is a bewildering number to choose from for a new comer.

Hello Dene,
please find some [RDC C++ samples for event handling|ftp://ftp.businessobjects.com/pub/incoming/CPP_code_samples_events_thread_999932.zip].
As your issue is about our [Legacy Application Development SDKs|SAP Crystal Reports - Legacy SDKs;, please post your future issues in this dedicated forum.
Thanks a lot
Falk

Help with creating a user input BTree for hierarchy structure

I have been trying to create code that takes a user input string
ex: a:b,c;b:g,h,j;g:k,m;b:u
note: (the above string is then stored into a string array such in the format a:bc;b:ghj;g:km;b:u after it is verified that the hierarchy order is correct)
The string is read in such that the any value before the : is a parent and its childern continue until a ; is found. Anyway verifying the sting I have accomplished and I have been able to input the string into a modified binary tree as long as there are only 2 childern per parent and graphically represents its structure of hierarchy. The problem is that each parent can have more the two childern.
I have been working with the BTree class and find its output similar to what I am wanting which would represent a hierarchy of objects (files, employees, etc...) anyway I have been stumped as to how to get the above string into a format that can then create the correct BTree output without hard code.
If any one has any suggestions on how to turn the data, in the string array into a usable format to create the correct BTree output, I would greatly appreciate it.
In the above example the string array, a:bc;b:ghj;g:km;b:u would have a desired ouput of
a
..b
....g
......k
......m
....h
....j
....u
..c
Thanks
Shane

OOPS! I ment to say JTree not BTree

Report designer error for hierarchial structure on Columns

Similar Messages

Maybe you are looking for