Report Designer error
Hi,
When am trying to Insert Dataprovider am getting below error, Please some one help me
RD revision 7100.0.0205
Internal error ID :E-SELECDATAPROVIDER
Error Message : check :RFC Exception
Thanks,
GAL
Hi Gal Bi,
This is basically an RFC execptio error,,Are u using it for 1st time? if so go to tcode-SICF>execute>collapse all folder for SAP BW,,then c which are dull>then rt click activate. if its displayed in Bold,then it means activated. or try contacting ur BAsis person.
This shud help
Thanks
Assign points if helped
Similar Messages
-
Report Designer - Error while opening a saved report
Hi,
I am not sure if this is an authorization issue or configuration issue.
When I try to open a saved report on Report designer, I keeping getting an error: Report Version is invalid: "0".
Has anybody faced similar problem?
We are on SP09.
Regards,
Payal.Payal,
I am afraid, that your report might be corrupted. This might have happened, if in tx SE16 the version is changed. The Report XML displayed in SE16 for table RSERDATA, is limited to ca. 1024 charachters. When editing the version, after pressing the save button, the Report XML is cut off at 1024 charachters and the report is lost.
Please do not set the report version in tx SE16!
I will need to configure the program RS_REPORT_MAINTAIN, such that reports with version "0" can be saved with the minimum version 9.0.
Until then I recommend the following procedure for Reports that are ok, but have the Version "0" bug:
1) in tx SE38, program: RS_REPORT_MAINTAIN
open your report with option "DT" (designtime)
2) Switch to Edit mode.
Make a backup copy of the report using the "Save As" Button.
You can copy the Report XML to the clipboard using Ctrl-A, Ctrl-C
3a) Open a dummy report in RS_REPORT_MAINTAIN created previously with
Report Desginer ( --> The version is set to 9.0).
Switch to edit mode and paste the Report XML and Save.
or
3b) Debug FUNCTION rs_bex_report_load_rfc.
Open a report and change the value of E_REPORT_VERSION to "9.0"
before leaving the function.
Hope this helps, karim
P.S.
I will update note 1016224 -
Bex Report Designer: Error while loading metadata
hi experts,
I am working with BI7 Bex Report Designer and we are using SP9. when i tried to load the Query in Report Designer its giving below error.
Error while loading metadata.
Check the Query and portal settings.(but the query is working fine in Analyzer).
and its giving message class RSBOLAP, message number 018 and Description is java system error: incoming call is not authorized.
when i double click the error its giving below error details.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
could you plz suggest me how to rectify the problem.
regards
vadlamudiHi vadlamudi
The error message RSBOLAP 018 means, that the ABAP stack can't communicate with the Java Stack.
1) Please ensure, that the user, used for the Report Designer, is valid in the Portal too. Depending on the user management setup this means that there either needs to be the same user or an assigned user in the Portal.
2) In case the user is valid, it means a basic misconfiguration according to note 937697. In this case please run the Support Desk Tool and ensure, that all checks are green. Please ensure, that the latest version of the Support Desk Tool is used.
Regards,
Janine -
Report Designer - error message and variable
Hi All,
Who has already experience with the formatted report (Report Designer)?.
We work with SAP GUI 640.
I have the following problems with the report designer.:
1.) If I even execute the report designer, I receive the following error message:
<b>Web Item Report Error
Error while processing the dynamic report section with the name " REP_TEST_1"
While processing the dynamic report section with the name "REP_TEST_1", this
error occured:
Characteristic SDB2_IO1_F9 not found on axis "ROW" of data
provider "SDB2_IO1"</b>
I`ve already checked the Query and the InfoSet on this the Query was built. There are no mistakes! The InfoObject is in the row.
With 2 other ones new defined Queries I receive the same error message, only with another info object.
2.) If I executing the report designer not all variables are available.
How can I change this?
I`m thanks for every information and hope that Somebody can help me.
regards,
WolfgangHello Nagesh,
1.) yes, I have one structure in the column.
2.) That`s right what you say. This tool is very tricky!
I`ve never changed the query. If I executing the report designer there show me one
variable, but I have defined four in the query.
So, what can I do to solve this problem?
Thanks for your help.
Best regards,
Wolfgang -
Report designer error for hierarchial structure on Columns
Hello,
I have a query with a structure in rows and another one in columns. I also have a 0COMPANY hierarchy Dimension within the Columns.
When I insert the data provider into a report designer report, I receive the following error:
"Query contains a hierarchial structure on Column(s)..."
Has any one encountered this issue before? Is there a note or workaround available?
Thank you.
Sri YallaHi,
the report designer need to have a fixed number of columns. If you have a Hierarchical Structure in the Columns, the number of columns can change. Therefore Report designer does not allow to use this DP in this drill down. You should place the Row structure to the columns and the hier-structure to the rows. then it should work.
best regards,
kai -
Report Designer - Error when Loading Report
Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
HemantHello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development -
When inserting the data provider while starting the Report Designer, we get the following error message:-
"RSBOLAP: 018 Java System Error timeout during allocate......"
Can someone please tell us what this means and how to rectify?
Many thanks,
Frederickplease ask your system administrator to set up the ABAP->JAVA and JAVA->ABAP connectivity in a valid way (at least for your user...).
Note 916090 - check this oss as well.
Hope it Helps
Chetan
@CP.. -
Hi,
When am trying open Query in BEx report designer it is getting below error plz help me to solve this issue.
error while loading query metadata check the wuery and portal settings
RSBOLAP 017 Java communication error : RFC destination NOT_CONFIGURD Does not exist
Thanks,
Medha.Hi Medha
this is due to two reaso
1 For the system IP there should be open a port
2 May be its a authorization problem check this object is added or not S_RFC
Shashi.. -
Report Designer error i VS 2013 - "Data at the root level is invalid."
Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
m_fields = NewArrayList()
Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
Next i
'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
stream = File.OpenWrite("D:\MyTestReport2.rdlc")
Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
' Causes child elements to be indented
writer.Formatting = Formatting.Indented
' Report element
writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
writer.WriteStartElement("Report")
writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
writer.WriteStartElement("ReportSections")
writer.WriteStartElement("ReportSection")
writer.WriteElementString("Width", "11in")
writer.WriteStartElement("Body")
writer.WriteElementString("Height", "5in")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Tablix")
writer.WriteAttributeString("Name", Nothing, "Tablix1")
writer.WriteElementString("Top", ".5in")
writer.WriteElementString("Left", ".5in")
writer.WriteElementString("Height", ".5in")
writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
writer.WriteStartElement("TablixBody")
' Tablix Columns
writer.WriteStartElement("TablixColumns")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixColumn")
writer.WriteElementString("Width", "1.5in")
writer.WriteEndElement() ' TableColumnNext fieldName
writer.WriteEndElement() ' TablixColumns' Header Row
writer.WriteStartElement("TablixRows")
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", fieldName)
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows") Since Rows tag in header is not closed not need to open fresh tag
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
'writer.WriteElementString("Value", fieldName)
writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow
writer.WriteEndElement() ' TablixRows'End of Details Rows
writer.WriteEndElement() ' TablixBody
writer.WriteStartElement("TablixRowHierarchy")
writer.WriteStartElement("TablixMembers")
writer.WriteStartElement("TablixMember")
' Group
writer.WriteElementString("KeepWithGroup", "After")
writer.WriteEndElement() ' TablixMember' Detail Group
writer.WriteStartElement("TablixMember")
writer.WriteStartElement("Group")
writer.WriteAttributeString("Name", Nothing, "Details")
writer.WriteEndElement() ' Group
writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixRowHierarchy
writer.WriteStartElement("TablixColumnHierarchy")
writer.WriteStartElement("TablixMembers")
'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
writer.WriteStartElement("TablixMember")
writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixColumnHierarchy
writer.WriteElementString("DataSetName", "tbdataset")
writer.WriteEndElement() ' Tablix
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' Body
writer.WriteStartElement("Page")
' Page Header Element
writer.WriteStartElement("PageHeader")
writer.WriteElementString("Height", "1.40cm")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Textbox1")
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", Nothing, "ABC CHS.")
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TextBox
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' PageHeader
writer.WriteEndElement() ' Page
writer.WriteEndElement() ' ReportSection
writer.WriteEndElement() ' ReportSections' DataSources
writer.WriteStartElement("DataSources")
writer.WriteStartElement("DataSource")
writer.WriteAttributeString("Name", Nothing, "tbdata")
writer.WriteStartElement("DataSourceReference")
writer.WriteEndElement() ' DataSourceReference
writer.WriteEndElement() ' DataSource
writer.WriteEndElement() ' DataSources'DataSet
writer.WriteStartElement("DataSets")
writer.WriteStartElement("DataSet")
writer.WriteAttributeString("Name", Nothing, "tbdataset")
writer.WriteStartElement("Query")
writer.WriteElementString("DataSourceName", Nothing, "tbdata")
'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
writer.WriteElementString("CommandText", Nothing, "TableDirect")
writer.WriteEndElement() ' Query'Fields
writer.WriteStartElement("Fields")
ForEach fieldName In m_fields
writer.WriteStartElement("Field")
writer.WriteAttributeString("Name", Nothing, fieldName)
writer.WriteElementString("DataField", fieldName)
writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
writer.WriteEndElement() ' FieldNext
writer.WriteEndElement() ' Fields' rd datasetinfo
writer.WriteEndElement() ' DataSet
writer.WriteEndElement() ' DataSets
writer.WriteEndElement() ' Report' Flush the writer and close the stream
writer.Flush()
stream.Close()
'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
Dim ms AsNewMemoryStream(myByteArray)
'Supply Stream to ReportViewer
ReportViewer1.LocalReport.LoadReportDefinition(ms)
ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?Hi RACES,
Based on your description, I'm afraid that it is not the correct forum for this issue, but maybe I could help you find a more appropriate forum.
If it is related to the Visual Studio Report Controls, you could select this forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols
But if it is the SSRS issue, maybe this forum would be better for you:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error while generating PDF BI 7 Report Designer
Hi,
I am getting this error Error while generating PDF when i tried print version on report designer,
I tried to find information on this error but there was no information regarding this , so posted here.
Please let me know if you have any suggestions.
Thanks,
KumarWe have restated the java server and now the issue solved.
Kumar -
Report Designer - Binding Error
Hi Guys,
I am trying to use the report designer to build some reports. When I assign any dataprovider to my report - query/query view, I am getting an error "Binding Error for Characteristics"/"Binding Error for Key Figures". Can you please let me know if someone has faced this error and what can be the possible resolution. This is kind of urgent because none of the queries seem to work. We are on SPS 9 which I know is not the best.
Thanks,
Pratik.is it an DROPDOWN you trying to add dataprovider??
Hope it Helps
Chetan
@CP.. -
"Report Designer" Execution Error
Hi Gurus...
client is using SAP GUI 710 version. while executing the report using "Report Designer".
we are getting an error, "This report web Itemcan display reports with versionnumber 2.1 or lower. this report has version number 2.2" To display this report, use a newer version of the report web Item"
this is the error, <removed by moderator>
Cheers
Edited by: Siegfried Szameitat on Jan 19, 2009 12:48 PMUnable to see Hierarchies in report designer?
cheers -
Hi
When I'm opening a view in report designer I'm getting the following error.Can anyone please help me with this.Its very urgent for me to sort this issue.
<b>The report designer doesn't support the query drilldown.
Key figure in static filter is not yet supported.</b>
For this particular query I have used only cell definitions in rows and colums.and some Hierarchies are there in the global filter.Hi Harinath,
I have had this problem due to the fact I had variable in the filter in the query designer, I put fix selection in the filter then generate the report an after I put back my varibale in the filter.
Hope this help.
Eric -
Error message in Report designer "Activate Default Theme: 0TRADESHOW"
Hi,
While working in Report Designer, I repeatedly get an error message saying "Activate Default Theme: 0TRADESHOW. See Note 1071338". After following the instructions and activating this theme, the problem still persists.
Anyone with a solution to this problem? We are running BI 7, package level 17.
Regards
NilsHi all,
I had the same issue and finally solved re-installing BC in BACKGROUND mode.
For unknown reason, my first istallation generate the a 0TRADESHOW entry with version D in table RSTHEMES.
Later attempts to re-install BC were not modifying this table.
Until I tryied Background Installation. It promped for overwriting current installation, I accepted and A version get generated.
best regards
Carlos Serrano -
Error Message in BEx Report Designer 7.0
I am getting the following error message when I try to add a data provider (Query) to BEx Report Designer:
RSBOLAP 017 Java Communication Error: RFC destination NOT_CONFIGURED does not exist
Would anyone be able to provide feedback on what to do?Hi Selva Kumar,
Its a Basis Issue , report to a Basis asministrator about the configuration of Report Designer .
For info refer this link:
https://forums.sdn.sap.com/click.jspa?searchID=21289661&messageID=6734602
Cheers,
Tanish
Maybe you are looking for
-
Keyboard shortcuts in CFB on Mac
Hi, I work now with ColdfusionBuilder on Mac OS X and there are a few things I am missing from the Windows version. I use the latest on Mac OSX btw In the CF editor, I can use ctrl+Arrow left to jump one word to the left and Ctrl+Arrow right to jump
-
Gnome 3.2: Moving the Date, Systray Gone, Extensions Disabled
Hey all - I upgraded to Gnome 3.2.0, and I'm experiencing three separate (I think) problems: 1) The date/time in the center of the panel _won't move_. All of the extensions place their icons to the right of it, and it stays put. Thus, if I add the
-
Hello folks, I want to know if you guys have a question bank to start conducting workshop and create Blueprint for GL,AP, AR process. Any help would be appreciated. Best Regards Shine
-
I recently update both iTunes to the lates version and my iPhone 5 to ios 7. After installing most of my music has dissapeard! The music appears in iTunes but when selected to play I get an error message stating that the original location cannot be f
-
I had a quick links bar that contained several of my daily sites. Today I opened Firefox and that bar is no longer there. I have tried to find it under the "View" tab but nothing exists. Where did it go and how do I bring it back? == This happened ==