Report designer not showing data.
Hi Experts,
I have created a web-template in WAD and set it as default web-template for all the reports and queries, from the transaction RSCUSTV27, restarted the J2EE engine.
When I run a query from Query Designer is shows all the required data and the web-template format finely. But when I create a report in Report Designer using that query, it only shows the standard template for the reports, but not the data. Is it a issue with the Support Package? Or what? Please find me the way to resolve this problem.
Thanks in advance,
Niloy.
Did you find a way to fix this issue - we are having the same problem.
Thank you!
Renee
Similar Messages
-
PLD Report does not show data from Query
Hello,
SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
Thanks,
NickHi Nicholas,
Please check below links.
query based print layout design
Print Layout Designer \Custom Reports
How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
Hope this help
Regards::::
Atul Chakraborty -
Report does not show data , but data exists in the cube.
Hi All,
I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
It shows the data if I load directly from the extractor, but not when I load data thru DSO.
Any ideas.
Alex(Arthur Samson)Hi Alex,
I am facing same problem, i have data in cube but in report i cant see....
i have created a generic DS, i loaded the data to DSO then CUBE.
data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
i think you solve this issue... plz help me to resolve this issue.
Regards,
SHAIK. -
OBIEE 11g Report UI not showing data
Hi,
On Obiee 11g Report, the query hit by the report at the backend shows results for all the columns but on UI only few of these columns show the data. From Query log, when I run the same query in the database I see all columns have data which is somehow not showing up on the UI end. What could be the problem? Can this be resolved or is it a bug in the OBIEE 11g?
Regards
VMHi Vanaja M/Gurus,
Is that your problem resolved?
I'm facing same issue here.
I was checking for solution/suggestions in blogs, but unfortunately i couldn't find much information in blogs too....
Can you help me out to cross this hurdle, as this issue is in Production. -
Web Analytics reports and not showing data
Recently we are not seeing Web Analytics data on our sites in our SharePoint 2010 farm. Before we used to see the data. This is what we are seeing now "There is no data available for this report. Here are some possible
reasons: (1) Web Analytics has not been enabled long enough to generate data;
(2) There is insufficient data to generate this report; (3) Data logging
required for this report might not be enabled; (4) Data aggregation might not be
enabled at the level required for this report."
I checked the Web Analytics Service Application and it is started. Web Analytics Data Processing service is started on all servers.
Microsoft SharePoint Foundation Usage Data Import Timer job is running every 30 minutes, while Microsoft SharePoint Foundation Usage Data Processing job is disabled. Does this job has to be
enabled for the web analytics data to be reported? Are there any other places to check to debug the problem? Appreciate any help.
raniHi Rani,
The timer job Microsoft SharePoint Foundation Usage Data Processing needs to be enabled, as it will aggregates and writes the data to the Web Analytics Reporting database.
Please enable this timer job and run the timer job to see how it works.
More reference about this error:
https://timreemtsma.wordpress.com/2011/10/25/sharepoint-2010-web-analytics-no-data-available/
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Reports does not show data which contains HTML tags
Dear Gurus
Im trying to resolve this problem but im really stuck in it. I have the requirment to customize PO reports in R12 and at the end of every report we have to show its Terms and Conditions.I have the following query wich brings me the data i need.
SELECT
otu.document_number po_segment1,
otu.document_id,
otta.template_id,
otta.template_name,
otta.description,
otta.intent,
otta.status_code,
otta.start_date,
otta.end_date,
otta.instruction_text,
otu.document_type,
otu.document_number po_segment1,
otu.document_id po_header_id,
osb.HEADING titulo_seccion,
oav.display_name,
oav.article_text article_text
FROM
apps.okc_terms_templates_all otta,
apps.okc_template_usages otu,
apps.okc_k_articles_b okab,
apps.okc_sections_b osb,
apps.okc_articles_all oaa,
apps.okc_article_versions oav
WHERE otta.template_id = otu.template_id
AND otu.document_id = okab.document_id
AND osb.scn_id(+) = okab.scn_id
AND okab.article_version_id = oav.article_version_id
AND oaa.article_id = oav.article_id
AND otu.document_number='21000000111' -- Purchase Document
AND otu.DOCUMENT_TYPE NOT IN ('RFQ_RESPONSE', 'RFQ','RFI_RESPONSE','RFI','AUCTION_RESPONSE','AUCTION')
The problem is the field okc_article_versions.article_text storage data with HTML tags as an example : ''<P>COMPANY will make it’s best effort to provide an accurate forecast to CONTRACTOR, <B><I>at the end of every quarter,</I></B> however, a forecast in any form, shall not represent a firm commitment by COMPANY.,</P>"
So when i tried to show the information my .rtf template nothing comes out. Does anybody knows whats happenig and how to resolve it??
Please, resolve this issue is more than urgent an i guess somebody have the answe Thanks a lot
MilyHi ,
Currently image url have value http://serverip:port/reports/rwservlet
I don't know is this correct? Suggest What value it should have?
Thanks
Vinod -
BI publisher report is not showing all the data
Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.KalidossHi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks. -
BI Projects Report Not showing data
Hi
I am a new to BI.I am trying to configure BI for Oracle Projects.So the problem here is couple of reports are not loading data on dashboard.
The issue is with Most of report that use data from Organization table
1.My BI is integrated with EBS.(I am wondering id HR security has anything to do with same)
2.Is there any step that should taken care while configuration?
3.Currently my log level is 3,But I am not able to see the query in Manage session.Show that I can get more information on specific table which is causing the query to return no data
Thanks in advance.Hi,
The query is having some restrictions in the filter area. And also there are 2 conditions in the query.
I am checking the Multiprovider data with the tcode LISTCUBE. I am giving all the selections and the restrictions in the Multiprovider , some data is there in the multiprovider.
But in report its not showing any data.
Where shall I check, whetehr I need to check the MultiProvider assignment characterstics? -
Hi,
We have a report which is built on Multi Provider.
This Multi Provider is using 2 global restricted KF's and we have some filter values also.
The report is not displaying any values , while the Multi Provider has values for the same restrictions
I tried to execute it in RSRT,but its not giving us any idea.
Please help me on this.
Thanks in advance!Hi,
The query is having some restrictions in the filter area. And also there are 2 conditions in the query.
I am checking the Multiprovider data with the tcode LISTCUBE. I am giving all the selections and the restrictions in the Multiprovider , some data is there in the multiprovider.
But in report its not showing any data.
Where shall I check, whetehr I need to check the MultiProvider assignment characterstics? -
Bex report does not show loaded data at once
Hi experts,
Why Bex report does not show loaded data at once after loading is finished but after some time?
Could be the reason of it:
a) huge amount of data in infocube.
b) there are no deleting/creating indexes before/after loading, because it takes too much time
c) anothe reason?
Thank you,
Tigr_ZHi Tigr,
A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
C - it can be resource issue, so please look into all and double check with basis if thats the case.
Regards
Sunny -
Discoverer Plus 10gR2 not show data when the script of view have package
Hi my friends.
I have a problem with discoverer plus, I don't know is a problem or I'm doing something wrong.
I have a four views, the views containg in the SELECT stament and WHERE clause packages, example:
SELECT d.price,
d.total,
d.min,
d.mx,
TO_CHAR (SYSDATE, 'q') quarter,
d.fid,
k_xdcd_qry.f_xdc_obt_price (d.prod, d.id) --> package
k_xpxpd_qry.f_xpeds_salary_ca_u (
d.prod,
d.id) xp --> package
FROM px_prices_proc c,
xp_sla_max d,
xmp_sla_puc b
WHERE a.prod = b.prod
AND a.id = b.id
AND a.prod = k_xps_tools.f_obt_prod --> package
When I used the views on discoverer plus for construct the report, when execute the query not show data.
Appreciate it if you could help or tell me I'm doing wrong or does not support Discoverer Plus package execution.Hi Tux,
This appears to be a grant issue. Apparently, you have granted execute with respect to this package to the EUL owner or the view would not have compiled. If you have not given EUL owner the grant option, I would recommend doing this as well.
This appears to be an Oracle APPS EUL (tell me if I am wrong). If this is the case, it goes without saying that APPS will need to be granted the execute privilege.
Also, by default, a stored package executes with the privileges of its owner. If your custom package was designed this way, are the objects which it references received the appropriate grant? I assume you tested this, but I am concerned that the line, a.prod = k_xps_tools.f_obt_prod, in the where clause could be resulting in the Null set being returned.
Patrick -
WT reporter does not show split for tax authorities!
Dear all:
I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
Do you have any work around for this?
I would appreciate any tip or workaround on this,
Thank you!Hi
1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
br, Ajay M -
EXCEL out put is not showing data
Hi All,
My report is working fine it is showing data in XML but it is not showing data in Excel output. Excel output is empty.
i have attached excel and xml files. please help me.
FYI: these are migrated reports from 10g to 11g.
Thanks in advance for your timeUsing ua.bat we upgraded 10g to 11g., we got sucessfully message.
after upgrade if i try to open excel it is not showing opening and showing action instead of excel name . I though excel out put has corrupted. i downloaded excel layout from 10g and uploaded in 11g report using upload layout.
we did not make any changes in database.
below one is not related to this one but .. after upgraded reports multi parametrs did not work if i select more than one column ( i opened as different topic) then i have removed
( (coalesce(null, :P_PPD_REGION) is null) and kept(region.X_REGION in (:P_PPD_REGION) from following statement then i did report is working with multi parameters.
my doubt is is it correct thing i did ? if not how can my multi parameter will work . we are using oracle as database.
AND ( (coalesce(null, :P_PPD_REGION) is null) or (region.X_REGION in (:P_PPD_REGION)) )
AND ( (coalesce(null, :P_COUNTRY) is null) or (region.REGION_CD in (:P_COUNTRY)) )
AND ( (coalesce(null, :P_SITE_NUM) is null) or (ptcl_site.site_num in (:P_SITE_NUM)) )
I really appreciate for your support. -
2lis_03_bf data is not showing data in RSA3
Hi,
I have loaded 2lis_03_bx first for a plant using MCNB transaction,its showing data in RSA3 then I have loaded 2lis_03_bf datasource for the same plant using transaction 0LI2BW. but it is not showing data in RSA3.
I have done the above process in background.
In SM37 it is showing the following message for the 2lis_03_bf datasource
<b>Job started
Step 001 started (program RMCBNEUB, variant &0000000000003, user ID TCS_SRM)
Date fields for info structure S032 are not generated
Job finished</b>
steps:
1.Before loading the data I have deleted data using LBWG
2.In LBWE, 2lis_03_bf is already activated.
Please help me out on resolving the above issue
Thanks in AdvanceODS Settings
BEx reporting option --> If this indicator is not set, no SID's are generated for the new characteristics when the data in the ODS object is activated.This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries.
Refer this link for more information...
http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/frameset.htm -
Please see this query, not showing data Why?
I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNOWhere "first table" is merch_order and "second table" is export_order1?
How many distinct orders are in each table?
Are there any NULL order numbers in either table?
I'd put money on the fact that if commenting out a clause causes a number of rows to be returned, that clause is filtering out all the rows. You'll need to go through your data to figure out why the NOT IN clause is filtering out all your rows.
Justin
Maybe you are looking for
-
Is there any way to get more effects to add to real instruments? I know you can add more software instruments to the library with jam packs and what not but do they add more effets that you can use on real instruments?
-
Help! I can't acces my apple id. It keeps saying my apple id doesn't exist. What do I do?
-
Satellite C55D-A-14W refuses to install Windows 7
Hi Everyone I do not like windows 8 and so I am trying to install windows 7 on this laptop. I have tried different methods.. but what I find really odd is even if I boot from the windows 7 DVD the windows 7 welcome screen appears but it will not proc
-
Hi there... I am getting the above mentioned error with the Description: dows-DistributedCOM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or rep
-
Edit Library Image in Photoshop Elements
It seems to be a hit or miss problem with updating images in Captivate Library. I am retrofitting files some one else created. I use Edit with... option and open in Photoshop Elements Edit exe. The edits in Photoshop goes as planned. I use Save from