Report designer ,WAD

Hi to All,
Can any body will send step by step/screen shot for
--->>>>Report designer and its functions, features etc, -
>>Information Broadcasting, WAD - Integration with EP and publishing queries in EP. in BI.7 version
pls send to my id
[email protected]
Thnx in Advance
Regards
Chaitanya

Hi,
Check the following Area.
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Regards,
RC

Similar Messages

Query Selection Screen in Report Designer/WAD

Hi Gurus,
Please help. Iam try to copy two BEx queries into one report using Report Designer & Web Application Designer. Iam sucessfull in it, however when I execute the report either by report designer or WAD, the report does not populate the selection screen, it just gives you the output of the two queires into one page. Is there a pre-settings we need to perform to get the selection screen for each of this report?
Thanks!

Hi,
Front-end upgrade will not help in this case. This feature "Display Variable Screen [VARIABLE_SCREEN]" was introduced in SP8 backend. You need SP8 backend to be able to use it.
You will find this setting in "Properties" -> "Web Template" (in combo box) -> "Web Template Parameters" -> "Behaviour" -> "Display Variable Screen"
This setting is defined in metadata and required an implementation on Java side (also SP8 required)
Regards, Karol Kalisz
SAP BI Development

BI 7.0: Report Designer / WAD Front-End Problems

Hi, We are on SAP Netweaver, BI 7.0 SP05, Stack01.
I have installed New SAP Front-End GUI Components,I dont have any problems executing queries in Web or BEx using Business Explorer 3.X.
I'm getting following errors when i try to execute with new version of Business Explorer.
1) Report Designer: Query XML is empty (BICS), please check query and portal setup.
this query works fine in BEx with New version as well.
2)Web Application Designer: "E002: Error while executing service RRXWS_WEBPUB_CALL_SERVICE:V for object 1()".
I couldnt execute simple web template in browser, when i click execute in browser, it open my local windows SAP directory.
Is there any setting or configuration files i should change?
i searched in OSS notes for these kind of errors, but i couldnt not find any
please let me know as its urgent.
thanks in advance..
Deepak Kunavarapu

Hi,
we're running NW2004s, BI 7.0 SP06.
I'm now testing the new Frontend-Tools and started with the Query Designer. Installed Patch 2, Revision 227. I created an new query and saved it. So far so good. After executing i get this error message:
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:02_16/02/06_0017_46228450
See the details for the exception ID in the log file
Do I need the integrate an platform_add_on? Does someone get the same errors?
Thanks in adavance.
Benjamin Herrmann

How to use report designer in bex analyser ,quary designer, wad give scree

how to use report designer in bex analyser ,quary designer, wad give screeeenshots detail

Hi,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
WAD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/71563c3f65b318e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a9/71563c3f65b318e10000000a114084/frameset.htm
/people/prakash.darji/blog/2006/07/16/bim253-at-teched--query-report-and-web-application-design-with-the-sap-business-explorer-suite
http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
GTR

Enabling the Reporting Tools WAD, BEX Query Designer in BI 7.0

Hi friends,
Recently we installed BI 7.0 system with SP 13 and now we want to connect to the reporting tools WAD, BEX Query designer, When I am selecting the BI system and after entering the login details we are encountering a error msg" connection to the gate way is failed".
If any one has a solution please post a reply.
Regards,
shahid

hi,
I am getting the error msg after running the wad application as no BI server is existing.
I hope that the wad and the BI system is not configured properly or connected to each other.
If any documents please forward me.
Regards,
shahid

Is there any transaction code for Report Designer,Query Designer and WAD

HI Gurus,
please tell me s there any transaction code for
1 Report Designer
2 Query Designer
3 WAD
Thanks in advance
Prashant

Hi Prashant,
We don't have any Transaction Codes for these.
Since these are installed along with the SAPLOGON BI components, it cannot be called using a standard transaction.
You have to use only .
Goto Start -> Programs -> Business Explorer -> Web Application Designer/Report Designer/Query Designer.
Hope it helps.
Reward with points if helpful.
Regards
Hemant Khemani
Edited by: Hemant Khemani on May 16, 2008 5:39 PM

Insert multiple queries using either WORKBOOK, WAD or Report Designer

Hello Guys
I have a task where I have to insert multiple queries into one single page/sheet & print it out later. For this I can use any one of the tools available: Workbook, WAD or Report Designer.
1. Workbook - Here I have read that we can use a call back MACRO and some other features.
2. WAD - Here I have read that we can use: 1. Multiple data providers (one for each query) & 2. Multiple web analysis items linking to each individual data provider.
3. Report Designer - Since this is the actual 'formatting' tool provided by SAP, I am assuming that this is the right environment to achieve my task.
My question: Which one out of the above 3 tools is actually feasible? Can someone explain me in detail about how to go about this task. Any 'How to..' docs from SAP would also be most helpful.
Regards.

Hi Kashyap,
I have done similar requirement in Workbook,it has better features and more user friendly than others......it depends on the individual...but U cna meet your requirement thru Workbooks...
If the Req are complicated then we go for MAcros ,where in we can satify the critical req,say some sort of Dynamic reqs.
There are lot of threads on Multiple queries in one Workbook....Just search in SDN and u will get lot of Threads on this topic.
Come bak if u have any other doubts.
Rgds
SVU123

Can we use Report Designer report as Data Provider in WAD

Hi all,
i have a requirement to desing WAD report, in that i need to include report designer report in one column and another 2 graphs.
I am not understanding how to include report designer report in WAD as DATA PROVIDER. Can we do this or not?
Thanks in advance,
Venky

Hi
You can include Report from report designer using Report designer webitem in BI 7.0. But you can't create report designer report in WAD as DATA PROVIDER.
Check below link
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0f/227b42a4449041e10000000a1550b0/frameset.htm
Regards,
Ravi Kiran

Hierarchy Node display in report designer

Hi,
Urgent please help me out.
I have an issue with report designer. I created a static report in Query designer with 2 structures. When i try to include this query in Report designer, only the last level nodes are getting into the Report designer. All the above level nodes are not featuring in Report designer.
Please help me how to make these top nodes visible in Report Designer.
Points are assured for each reply

thanks Ajeet ,
But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
Thnks . please advice.
Regards

BI 7.0 Report Designer

Has anyone any info on whether one can use the new report designer with BW 3.5? Is it a stand alone installation such as the WAD and the QAD?The formatting features of this tool are going to be very useful
Cheers
Anand

Hi Anand,
As per SAP:
To ensure that existing customer scenarios can continue to be edited, in addition to the new tools, the tools from SAP NetWeaver 04 will also be delivered.
These tools from SAP NetWeaver 04 are changed so that it is possible to work with these tools in connection with the new BI Server as well. This ensures that the previous functions will continue to be supported.
New functions, such as BI-Integrated Planning and Enterprise Reporting, are only possible with the new tools. Objects that were created with the new tools can no longer be edited with the tools from SAP NetWeaver 04.
The transition to the new tools will be done as needed. Conversion (if possible) occurs when the previous objects are opened in the new tools. This enables transition on an as-needed basis.
The recommendation is to make the change step by step, because further new features will only be made for the new tools.
Hope this helps...

Embedding a report designer query into a template - errors out

In a template i want to include the report designer query, with the web item type - report, when i drag the report item into the template and try to edit it, it takes me to the report designer, there I'm able to open my report designer query - then when i go to - menu - transfer to web apllication designer - it takes me back to WAD but errors out saying it encountered a problem. Did anyone come across this issue? And how did you overcoem this? Any help or pointer would be appreciated and rewarded.
Please find the error log below:
3:45:25 PM.686 ########## END ##########
3:45:25 PM.686 ########## --> com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main ##########
3:45:25 PM.686: For Info: WAD Start. Revision: 7005.5.1100.277
GetSystemInformation
SUNI Const: 1.602272
CommunicationFactory.GetSystemInformation (Setting Conn 1)): 1.602272
CommunicationFactory.GetSystemInformation (Setting Conn 2)): 7.110082
CommunicationFactory.GetSystemInformation (Setting init Propties)): 7.110082
CommunicationFactory.GetSystemInformation (SUNI.FUNCTION_EXISTS)): 7.710934
RSR_XLS_RFCtrc: 8.51207
CommunicationFactory.GetSystemInformation (RSR_XLS_NET_INTERFACE)): 18.02556
CommunicationFactory.GetSystemInformation (XML Stuff)): 20.0284
CommunicationFactory.GetSystemInformation (Prop Stuff)): 20.0284
CommunicationFactory.GetSystemInformation (Version)): 20.0284
CommunicationFactory.ObtainSystemInformationandCheckVersion (GetSysInfo)): 20.128542
BExTextPool.New1: 0.300426
BExTextPool.New2: 0.400568
BExTextPool.New3: 0.400568
BExTextPool.New2: 0.400568
CommunicationFactory.ObtainSystemInformationandCheckVersion (CheckAfterLogin)): 1.00142
CommunicationFactory.LogOnUsingComConnection (ObtainSystemInfo)): 21.129962
CommunicationFactory.LogOnUsingComConnection (MainConnectionChangedEvent)): 0
CommunicationFactory.LogOn: 21.730814
3:45:41 PM.458: Connected. System: BID
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" />
RSR_XLS_RFCtrc: 0.700994
BExThemes.LoadFromBackend: 2.50355
BExThemes.LoadFromBackend: 0
BExThemes.LoadFromBackend: 0
Vert
BExThemes.LoadFromBackend: 0
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" />
BExThemes.LoadFromBackend: 0
Vert
BExThemes.LoadFromBackend: 0
3:47:41 PM.198 ########## END com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main ##########
3:47:41 PM.198 ########## --> com.sap.bi.et.wad.RDHost.WADRDHostFactory.MaintainItem ##########
-EXCEPTION-START- 3:47:41 PM.198: External exception in Report Designer (execution) ---
Exception Message: Specified cast is not valid.
Exception    at com.sap.bi.et.ReportDesigner.RDbReportDesigner.getCookies()
   at com.sap.bi.et.ReportDesigner.RDbReportDesigner.RunFromWAD()
   at com.sap.bi.et.wad.RDHost.WADRDHostFactory.MaintainItem(XmlElement iItemTagNode, XmlElement iLibItemTagNode, IWADHostServicesProvider iServicesProvider, Boolean iIsLibItem)
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Trace.Exception(Exception, String)
     at com.sap.bi.et.wad.RDHost.WADRDHostFactory.MaintainItem(XmlElement, XmlElement, IWADHostServicesProvider, Boolean)
     at com.sap.bi.et.wad.rdcontrolhost.WADHostFactory.MaintainItem(XmlElement, XmlElement, IWADHostServicesProvider, Boolean)
     at com.sap.bi.et.wad.wiz.WADsF4GUIServices.CallCustomItemDialog(XmlElement, Form)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.mnuCTXTEditTagCustom_Click(Object, EventArgs)
     at System.Windows.Forms.MenuItem.OnClick(EventArgs)
     at System.Windows.Forms.MenuItemData.Execute()
     at System.Windows.Forms.Command.Invoke()
     at System.Windows.Forms.Control.WmCommand(Message&)
     at System.Windows.Forms.Control.WndProc(Message&)
     at System.Windows.Forms.ScrollableControl.WndProc(Message&)
     at System.Windows.Forms.ContainerControl.WndProc(Message&)
     at System.Windows.Forms.Form.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----

Hi Voodi,
I have the same problem too. Worked fine in SP 9 . Now we are in SP11 with FEP also in SP11 revision 277.Did you resolve the issue if so how?
Thanks,
Karthik

Dynamic Filter Display in Report Designer

Hi All,
We have implemented a new BI reporting tool and are using Report Designer for the output format. The problem is that we cannot see any dynamic filters or navigational level when printing as RD takes it back to the original format. To overcome this issue, we have given the same query with the variable selection so that RD always prints the variable selection but this has reduced performance.
Anyone with ideas to overcome this situation or any workarounds will be appreciated.

thanks Ajeet ,
But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
Thnks . please advice.
Regards

Placing table and chart side by side in report designer

Dear Expert,
In report designer how do I place table and chart side by side? I mean table in the left hand side and chart in the right hand side.
Thanks and Regards,
Rajib

Hi,
create two reports in WAD
table reports - assign DP_1 with query X
chart - assign DP_1 with query X
go to Report designer and create table with two columns.
add your chart and table
thanks
Edited by: Bhat Vaidya on Oct 15, 2008 2:15 PM

How to create template for Report Designer

I have to create 20 reports in report Designer and each one of them have same header, footer and column fields.
Is there any way i can create a Report Template which can be used in each report?
Kindly advice.
Thanks

I did create a report with header, footer and common column fields but how to add report in that?
Aslo by the i guess you mean WAD so Can you explain how to switch dynamically..and how to fit already built report in the web template? because coloum width in template and column width in report doesnt match so i was wondering how will they fit each other. Please explain
thanks.
Neha

Run Time Errors in BEx Report Designer?....asking for Portal Setup??

In BEx Report Designer, I keep getting short dumps and timeouts when trying to design flashy reports.
I keep getting 2 errors when I time out:
1. 'Query (view) definition cannot be retrieved from Portal.
Please try again or check query and Portal Setup!
Time limit exceeded.
2. xxx Error when reading Query (via BICS)
Please check query and Portal setup!
Time limit exceeded.
We are running ECC 6.0, BI2004s, and SEM 6.0. All in Sandbox/Dev environment.
We are NOT running EP.
I am aware that we have some memory issues, and we're adding 4Gb more on Thursday....can the solution be that simple, or are these errors telling me we need Portals installed? I was under the impression that Portals were NOT required for 2004s, so long as you did not use WAD etc.
Any thoughts??

You would need to install portals(EP) for the report designer to work. When you design your flashy report in designer and try it launch it... it would try to connect to EP to publish it. It bombs when it doesnt find the portal.
On a personal note: Report designer have a long way to go when you think the output would be something like crystal .. NO not yet ... But SAP just got started ... I think they would be there pretty soon. And they promise many enhancements as of SP 13.. so lets all wait.

Report designer ,WAD

Similar Messages

Maybe you are looking for