Report Diadem Display modes

Hello
I' m using DIAdem 11.1 to produce a report,  but the output ain't quite what i'm expecting.
please see the following image:
On the left side the graphic shown in red isn't the same as the preview (on the lower right side).
I know a can customize the Display mode, but none of those options produce a graphic exactly the same as the preview.
Thanks in advance, good work. 
Solved!
Go to Solution.

Hello!
Assuming your time channel is not equidistant: The reason is that in report the time is the X axis values and in the preview the sample index is the X axis values (implicit). Both displays are right in their way. From an engeneering point of view the report is more meaningful to me. AFAIK it is not possible to customize the X axis in the preview.
Matthias
Message Edited by Twigeater on 05-18-2010 04:26 PM
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?  

Similar Messages

  • Copa Report selection screen in display mode

    Dear Friends:
    In COPA Report, we have sales group,Fiscal year and Currency type in our selection screen,sales group should be in display mode i.e. the user
    must not be able to change the sales group.
    How to reslove the problem.Please advise.
    Thanks&Regards
    MSReddy

    Hello
    Create some authourization checks for the user. Try to check with BASIS team.
    Also check if you can default entries for a particular user.
    reg

  • After target display mode, iPhoto reports an error, "The current screen resolution is not optimal for iPhoto."

    I have the 27-inch (late 2009) iMac with mini-Display port input. Whenever I return from Target Display Mode, I get the attached error message and iPhoto becomes unresponsive (the window is still active, but clicking on it produces the error/warning system sound), I have to Force Quit it. The current screen resolution is not optimal for iPhoto (sometimes the error message is a little off the screen in the lower left and only the top of the window can be seen. This also seems to affect iTunes at the same time (by resizing the window to be super small), but without the error message or unresponsiveness.
    Has anyone else gotten this problem, and or might know of a fix?

    Yes, I have the same problem.  I have checked the resolution in Sysyem Preferences - display and it is properly set to the highest resolution (which is recommended).  I have no idea why this is ocurring but it is annoying.

  • EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9.

    EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9.  This issue occurs for some users only.I tried the same url in google chrome and is working fine.
    Can you please help.
    Please find the attached screenshot.

    Hi BJ1986,
    According to your description, I think this issue is caused by the IE browser that runs the report. To trouble shoot this issue, I suggest that we can try to clear internet temporary files, cookies and others in IE browser. And also add this site
    as a trusted site in IE browser to check this issue again.
    If this issue is still existed, it can also be occurred due to the setting or third party add-ons of Internet Explorer (IE). In this scenario, you can try to run IE in compatibility mode to check the issue again. Or I suggest that you can refer to the
    steps below to troubleshoot the issue:
    Click Tools -> Internet options.
    Switch to the Security tab, click Local intranet, and then select Default level.
    Switch to the Advanced tab, and click Restore advanced settings.
    Temporarily disable third party add-ons. For detailed steps, please see the link below: 
    http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Script Window in display mode

    Hi All,
    I am working on modification of the dunning report script (SAP VERSION IS 4.6C) . My requirment is to add few more lines in the address window in the script. The address window is VARIABLE type. When I am trying to do change in the change mode of the script the window parameters are coming in display mode . I want to increase the height of the window. As the dimensions are in display mode I am not able to change.
    please guide me.
    Thanks ,
    Vengal rao

    Hi Vengalrao,
    The Create, Change and Delete option in Zform are coming disabled because the original language in which the form was copied or created would be different than the language in which you are trying to edit.
    You can only make changes in elements in forms original language only.
    Revert in case i am not clear.
    Thanks,
    Daya.

  • RWI 00236 error while opening report in PDF mode

    Hi All,
    I'm getting the RWI 00236 error while the report is opened in PDF mode.I have searched on this error but couldn't got the answer so far.My report is quite a large one and i wont get any error while running simple reps.If this is something to do with temp files deletion at server side ,pls let me know which temp files needs to be deleted bcoz there quite few temp files at server level.Ofter getting this error msg ,the report browser hangs up and i needs to logout completely from infoview.
    Im using BO X1r2 version and service pack is SP4.

    Hi,
    Are you able to open other reports in PDF Mode or not
    If you are not able to open any report in PDF format then try to follow  below mentioned steps.
    1. Open Adobe Acrobat Reader. Click Edit > Preferences.
    2. Click Internet in the Categories column of the Preferences property sheet.
    3. Choose Display PDF in browser check box as shown below.
    4. Click Ok, Adobe will reconfigure the setting, close Reader.
    5. Now, when we view in pdf format in IE, we might see one  message
    6. So, when IE is launched, go to Tools>Manage Add-ons>Enable or Disable Add-ons and then enable
    "Adobe PDF Reader Link Helper" add-on. Click Ok, restart IE.
    Cheers,
    Suresh Aluri.

  • Limited to one display mode with new nvidia drivers

    I have a problem with nvidia drivers after 8178
    I can get any display mode to work as long as i specify only one mode.
    If i enter more modes in my xorg.conf, it will ignore all those modes and revert back to nvidia-auto-select (wich is 1024x768 in my case)
    Anyway, i'm not able to change resolutions using xrandr for example. I need this for some applications that require to run in a different display mode ( old windows games i run using wine for example)
    When i run X -logverbose 5 it becomes clear that all my monitor's supported modes are in the display pool.
    I have also put in gtp generated modelines for all the modes i might need.
    I really need a solution to this as i will probably no longer be able to use 8178 when xorg7.1 hits current.
    This is what i have in my xorg.conf:
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "AlwaysCore"
    InputDevice "Mouse1" "CorePointer"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/local/"
    FontPath "/usr/share/fonts/misc/:unscaled"
    FontPath "/usr/share/fonts/100dpi/:unscaled"
    FontPath "/usr/share/fonts/75dpi/:unscaled"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/CID/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    FontPath "/usr/share/fonts/cyrillic/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    SubSection "extmod"
    # Option "omit xfree86-dga"
    EndSubSection
    Load "dbe"
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx"
    Load "bitmap"
    Load "ddc"
    Load "int10"
    Load "record"
    # Load "speedo"
    Load "vbe"
    # Load "xf8_32bpp.so"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "evdev"
    # Option "Protocol" "Explorerps/2"
    Option "Device" "/dev/input/mx1000"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "11 12"
    Option "Dev Name" "Logitech USB Receiver" # cat /proc/bus/input/devices
    Option "Dev Phys" "usb-*/input0" # cat /proc/bus/input/devices
    Option "Buttons" "12"
    Option "Resolution" "800"
    EndSection
    Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "microsoftinet"
    Option "XkbLayout" "us"
    Option "XkbVariant" ",qwerty"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    # VendorName "Iiyama"
    # ModelName "A901HT"
    ModelName "IVM:0119"
    HorizSync 27.0 - 115.0
    VertRefresh 50.0 - 160.0
    # Option "DPMS"
    Modeline "1600x1200_100.00" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    Modeline "1600x1200_85.00" 234.76 1600 1720 1896 2192 1200 1201 1204 1260 -HSync +Vsync
    Modeline "1600x1200_75.00" 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -HSync +Vsync
    Modeline "1600x1200_60.00" 160.96 1600 1704 1880 2160 1200 1201 1204 1242 -HSync +Vsync
    Modeline "1280x1024_100.00" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    Modeline "1280x1024_85.00" 159.36 1280 1376 1512 1744 1024 1025 1028 1075 -HSync +Vsync
    Modeline "1280x1024_75.00" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -HSync +Vsync
    Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync
    Modeline "1152x864_100.00" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    Modeline "1152x864_85.00" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    Modeline "1152x864_75.00" 104.99 1152 1224 1352 1552 864 865 868 902 -HSync +Vsync
    Modeline "1152x864_60.00" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    Modeline "1024x768_100.00" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    Modeline "1024x768_85.00" 94.39 1024 1088 1200 1376 768 769 772 807 -HSync +Vsync
    Modeline "1024x768_75.00" 81.80 1024 1080 1192 1360 768 769 772 802 -HSync +Vsync
    Modeline "1024x768_60.00" 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync
    Modeline "800x600_85.00" 56.55 800 840 928 1056 600 601 604 630 -HSync +Vsync
    Modeline "800x600_75.00" 48.91 800 840 920 1040 600 601 604 627 -HSync +Vsync
    Modeline "800x600_60.00" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync
    Modeline "640x480_85.00" 35.71 640 672 736 832 480 481 484 505 -HSync +Vsync
    Modeline "640x480_75.00" 30.72 640 664 728 816 480 481 484 502 -HSync +Vsync
    Modeline "640x480_60.00" 23.86 640 656 720 800 480 481 484 497 -HSync +Vsync
    Modeline "320x240_60.00" 5.26 320 304 336 352 240 241 244 249 -HSync +Vsync
    Modeline "320x200_60.00" 4.19 320 304 328 336 200 201 204 208 -HSync +Vsync
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NvAGP" "3"
    Option "RenderAccel" "TRUE"
    Option "NoLogo" "on"
    Option "RandRRotation" "TRUE"
    # Option "CursorShadow" "FALSE"
    # Option "ConnectedMonitor" "CRT"
    # Option "UseEDIDFreqs" "FALSE"
    # Option "UseEDIDDpi" "FALSE"
    # Option "ModeValidation" "NoEdidModes"
    # Option "ModeValidation" "AllowNon60HzDFPModes"
    # Option "UseEDID" "FALSE"
    Option "IgnoreDisplayDevices" "CRT"
    Option "DPI" "96 x 96"
    Option "Coolbits" "1"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 32
    Modes "1280x1024"
    # Visual StaticGray
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1280x1024_85"
    # Modes "1280x1024_85 1152x864 1024x768 800x600 640x480 320x240 320x200"
    # Visual StaticGray
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1280x1024_85"
    # Visual StaticGray
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "800x600_75"
    # Visual StaticGray
    EndSubSection
    EndSection
    #Section "DRI"
    # Mode "0666"
    #EndSection
    All the EDID specific options i have commented out appeared to be useless.
    The following Xorg.0.log was generated using only one mode, resulting in X running in 1280x1024@85hz (logverbose level 5)
    [code]
    X Window System Version 7.0.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 7.0
    Build Operating System:Linux 2.6.16-ARCH i686
    Current Operating System: Linux Orthanc 2.6.17.11 #1 PREEMPT Fri Aug 25 08:31:05 CEST 2006 i686
    Build Date: 21 June 2006
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 29 13:57:46 2006
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Layout0"
    (**) |-->Screen "Screen0" (0)
    (**) |   |-->Monitor "Monitor0"
    (**) |   |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Mouse1"
    (WW) The directory "/usr/share/fonts/local/" does not exist.
        Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/CID/" does not exist.
        Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
        Entry deleted from font path.
    (**) FontPath set to "/usr/share/fonts/misc/:unscaled,/usr/share/fonts/100dpi/:unscaled,/usr/share/fonts/75dpi/:unscaled,/usr/share/fonts/misc/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,/usr/share/fonts/cyrillic/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1"
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.8
        X.Org XInput driver : 0.5
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
    (II) Module bitmap: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules/libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,2560 card 1043,80b2 rev 02 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,2561 card 0000,0000 rev 02 class 06,04,00 hdr 01
    (II) PCI: 00:1d:0: chip 8086,24c2 card 1043,8089 rev 02 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,24c4 card 1043,8089 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,24c7 card 1043,8089 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,24cd card 1043,8089 rev 02 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr 01
    (II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,24cb card 1043,8089 rev 02 class 01,01,8a hdr 00
    (II) PCI: 01:00:0: chip 10de,0312 card 1043,80e7 rev a1 class 03,00,00 hdr 00
    (II) PCI: 02:05:0: chip 14e4,4401 card 1043,80a8 rev 01 class 02,00,00 hdr 00
    (II) PCI: 02:0c:0: chip 105a,4d69 card 105a,4d68 rev 02 class 01,80,85 hdr 00
    (II) PCI: 02:0d:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
    (II) PCI: 02:0d:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
    (II) PCI: 02:0d:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
        [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
        [0] -1    0    0xde000000 - 0xdfdfffff (0x1e00000) MX[B]
    (II) Bus 1 prefetchable memory range:
        [0] -1    0    0xdff00000 - 0xefffffff (0x10100000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
        [0] -1    0    0x00009000 - 0x000090ff (0x100) IX[B]
        [1] -1    0    0x00009400 - 0x000094ff (0x100) IX[B]
        [2] -1    0    0x00009800 - 0x000098ff (0x100) IX[B]
        [3] -1    0    0x00009c00 - 0x00009cff (0x100) IX[B]
        [4] -1    0    0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [5] -1    0    0x0000a400 - 0x0000a4ff (0x100) IX[B]
        [6] -1    0    0x0000a800 - 0x0000a8ff (0x100) IX[B]
        [7] -1    0    0x0000ac00 - 0x0000acff (0x100) IX[B]
        [8] -1    0    0x0000b000 - 0x0000b0ff (0x100) IX[B]
        [9] -1    0    0x0000b400 - 0x0000b4ff (0x100) IX[B]
        [10] -1    0    0x0000b800 - 0x0000b8ff (0x100) IX[B]
        [11] -1    0    0x0000bc00 - 0x0000bcff (0x100) IX[B]
    (II) Bus 2 non-prefetchable memory range:
        [0] -1    0    0xdb800000 - 0xdd7fffff (0x2000000) MX[B]
    (II) Bus 2 prefetchable memory range:
        [0] -1    0    0xdfe00000 - 0xdfefffff (0x100000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) nVidia Corporation NV31 [GeForce FX 5600] rev 161, Mem @ 0xde000000/24, 0xe0000000/28, BIOS @ 0xdffe0000/17
    (II) Addressable bus resource ranges are
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
    (II) Active PCI resource ranges:
        [0] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [1] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [2] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [3] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [4] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [5] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [6] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [7] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [8] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [9] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [10] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [11] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [12] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [13] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [14] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [15] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [16] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [17] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [18] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [19] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [20] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [21] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
        [0] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [1] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [2] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [3] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [4] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [5] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [6] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [7] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [8] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [9] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [10] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [11] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [12] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [13] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [14] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [15] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [16] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [17] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [18] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [19] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [20] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [21] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [6] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [7] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [8] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [9] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [10] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [11] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [12] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [13] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [14] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [15] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [17] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [18] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [19] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [20] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [21] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [22] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [23] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [24] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [25] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [26] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [27] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [28] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Reloading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Type1
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 7.0.0, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.8774
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "bitmap"
    (II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
    (II) Loading font Bitmap
    (II) LoadModule: "ddc"
    (II) Loading /usr/lib/xorg/modules/libddc.so
    (II) Module ddc: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension RECORD
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules/libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.1.0
        ABI class: X.Org Video Driver, version 0.8
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.8774
        Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.1
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
        compiled for 0.0.0, module version = 1.1.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.4
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
    (II) NVIDIA dlloader X Driver  1.0-8774  Tue Aug  1 20:55:35 PDT 2006
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) Found 1 NVIDIA X Screens
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.2
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules/libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.8
    (II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [6] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [7] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [8] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [9] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [10] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [11] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [12] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [13] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [14] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [15] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [17] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [18] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [19] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [20] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [21] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [22] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [23] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [24] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [25] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [26] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [27] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [28] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
    (II) resource ranges after probing:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [6] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [7] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [8] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [9] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [10] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [11] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [12] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [13] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [14] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [15] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [16] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
        [17] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [18] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
        [19] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [20] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [21] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [22] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [23] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [24] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [25] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [26] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [27] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [28] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [29] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [30] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [31] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [32] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
        [33] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "NoLogo" "on"
    (**) NVIDIA(0): Option "NvAGP" "3"
    (**) NVIDIA(0): Option "RenderAccel" "TRUE"
    (**) NVIDIA(0): Option "RandRRotation" "TRUE"
    (**) NVIDIA(0): Option "Coolbits" "1"
    (**) NVIDIA(0): Option "DPI" "96 x 96"
    (==) NVIDIA(0): Using HW cursor
    (**) NVIDIA(0): Enabling RENDER acceleration
    (==) NVIDIA(0): Video key set to default value of 0x101fe
    (II) NVIDIA(0): NVIDIA GPU GeForce FX 5600 at PCI:1:0:0
    (--) NVIDIA(0): VideoRAM: 131072 kBytes
    (II) NVIDIA(0): GPU Architecture: 0x30
    (II) NVIDIA(0): GPU Implementation: 0x31
    (II) NVIDIA(0): GPU Revision: 0xa1
    (--) NVIDIA(0): VideoBIOS: 04.31.20.28.00
    (--) NVIDIA(0): Found 2 CRTCs on board
    (II) NVIDIA(0): Supported display device(s): CRT-0, CRT-1, DFP-0, DFP-1, TV-0
    (II) NVIDIA(0): Bus detected as AGP
    (II) NVIDIA(0): Detected AGP rate: 4X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (II) NVIDIA(0):
    (II) NVIDIA(0): Mode timing constraints for  : GeForce FX 5600
    (II) NVIDIA(0): Maximum mode timing values   :
    (II) NVIDIA(0):     Horizontal Visible Width : 8192
    (II) NVIDIA(0):     Horizontal Blank Start   : 8192
    (II) NVIDIA(0):     Horizontal Blank Width   : 4096
    (II) NVIDIA(0):     Horizontal Sync Start    : 8184
    (II) NVIDIA(0):     Horizontal Sync Width    : 504
    (II) NVIDIA(0):     Horizontal Total Width   : 8224
    (II) NVIDIA(0):     Vertical Visible Height  : 8192
    (II) NVIDIA(0):     Vertical Blank Start     : 8192
    (II) NVIDIA(0):     Vertical Blank Width     : 256
    (II) NVIDIA(0):     Veritcal Sync Start      : 8191
    (II) NVIDIA(0):     Vertical Sync Width      : 15
    (II) NVIDIA(0):     Vertical Total Height    : 8193
    (II) NVIDIA(0):
    (II) NVIDIA(0): Minimum mode timing values   :
    (II) NVIDIA(0):     Horizontal Total Width   : 40
    (II) NVIDIA(0):     Vertical Total Height    : 2
    (II) NVIDIA(0):
    (II) NVIDIA(0): Mode timing alignment        :
    (II) NVIDIA(0):     Horizontal Visible Width : multiples of 8
    (II) NVIDIA(0):     Horizontal Blank Start   : multiples of 8
    (II) NVIDIA(0):     Horizontal Blank Width   : multiples of 8
    (II) NVIDIA(0):     Horizontal Sync Start    : multiples of 8
    (II) NVIDIA(0):     Horizontal Sync Width    : multiples of 8
    (II) NVIDIA(0):     Horizontal Total Width   : multiples of 8
    (II) NVIDIA(0):
    (--) NVIDIA(0): Connected display device(s) on GeForce FX 5600 at PCI:1:0:0:
    (--) NVIDIA(0):     Iiyama (CRT-0)
    (--) NVIDIA(0): Iiyama (CRT-0): 350.0 MHz maximum pixel clock
    (--) NVIDIA(0):
    (--) NVIDIA(0): --- EDID for Iiyama (CRT-0) ---
    (--) NVIDIA(0): EDID Version                 : 1.1
    (--) NVIDIA(0): Manufacturer                 : IVM
    (--) NVIDIA(0): Monitor Name                 : Iiyama
    (--) NVIDIA(0): Product ID                   : 6401
    (--) NVIDIA(0): 32-bit Serial Number         : 0
    (--) NVIDIA(0): Serial Number String         :
    (--) NVIDIA(0): Manufacture Date             : 2000, week 30
    (--) NVIDIA(0): DPMS Capabilities            : Standby Suspend Active Off
    (--) NVIDIA(0): Prefer first detailed timing : No
    (--) NVIDIA(0): Supports GTF                 : No
    (--) NVIDIA(0): Maximum Image Size           : 360mm x 270mm
    (--) NVIDIA(0): Valid HSync Range            : 31 kHz - 106 kHz
    (--) NVIDIA(0): Valid VRefresh Range         : 56 Hz - 85 Hz
    (--) NVIDIA(0): EDID maximum pixel clock     : 229.5 MHz
    (--) NVIDIA(0):
    (--) NVIDIA(0): Established Timings:
    (--) NVIDIA(0):   640  x 480  @ 60 Hz
    (--) NVIDIA(0):   640  x 480  @ 72 Hz
    (--) NVIDIA(0):   640  x 480  @ 75 Hz
    (--) NVIDIA(0):   800  x 600  @ 56 Hz
    (--) NVIDIA(0):   800  x 600  @ 60 Hz
    (--) NVIDIA(0):   800  x 600  @ 72 Hz
    (--) NVIDIA(0):   800  x 600  @ 75 Hz
    (--) NVIDIA(0):   1024 x 768  @ 60 Hz
    (--) NVIDIA(0):   1024 x 768  @ 70 Hz
    (--) NVIDIA(0):   1024 x 768  @ 75 Hz
    (--) NVIDIA(0):   1280 x 1024 @ 75 Hz
    (--) NVIDIA(0):
    (--) NVIDIA(0): Standard Timings:
    (--) NVIDIA(0):   1600 x 1200 @ 60 Hz
    (--) NVIDIA(0):   1600 x 1200 @ 70 Hz
    (--) NVIDIA(0):   1600 x 1200 @ 75 Hz
    (--) NVIDIA(0):   1600 x 1200 @ 85 Hz
    (--) NVIDIA(0):
    (--) NVIDIA(0): --- End of EDID for Iiyama (CRT-0) ---
    (--) NVIDIA(0):
    (II) NVIDIA(0): Frequency information for Iiyama (CRT-0):
    (II) NVIDIA(0):   HorizSync   : 31.000-106.000 kHz
    (II) NVIDIA(0):   VertRefresh : 56.000-85.000 Hz
    (II) NVIDIA(0):     (HorizSync from EDID)
    (II) NVIDIA(0):     (VertRefresh from EDID)
    (II) NVIDIA(0):
    (II) NVIDIA(0): --- Modes in ModePool for Iiyama (CRT-0) ---
    (II) NVIDIA(0): "nvidia-auto-select"   : 1024 x  768 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1920x1200"            : 1920 x 1200 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1920x1200_70"         : 1920 x 1200 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1920x1200_60"         : 1920 x 1200 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1856x1392"            : 1856 x 1392 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1856x1392_60"         : 1856 x 1392 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1792x1344"            : 1792 x 1344 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1792x1344_60"         : 1792 x 1344 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1680x1050"            : 1680 x 1050 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1680x1050_85"         : 1680 x 1050 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1680x1050_75"         : 1680 x 1050 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1680x1050_70"         : 1680 x 1050 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1680x1050_60"         : 1680 x 1050 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1600x1200"            : 1600 x 1200 @  85.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1200_85"         : 1600 x 1200 @  85.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1200_75"         : 1600 x 1200 @  75.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1200_70"         : 1600 x 1200 @  70.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1200_65"         : 1600 x 1200 @  65.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1600x1200_60"         : 1600 x 1200 @  60.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1024"            : 1600 x 1024 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1600x1024_60"         : 1600 x 1024 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050"            : 1400 x 1050 @  85.3 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_85"         : 1400 x 1050 @  85.3 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_85_0"       : 1400 x 1050 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_75"         : 1400 x 1050 @  74.8 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_70"         : 1400 x 1050 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_70_0"       : 1400 x 1050 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_60"         : 1400 x 1050 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x1024"            : 1280 x 1024 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x1024_85.00"      : 1280 x 1024 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_75.00"      : 1280 x 1024 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_60.00"      : 1280 x 1024 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_85_0"       : 1280 x 1024 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x1024_85"         : 1280 x 1024 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_75"         : 1280 x 1024 @  75.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1280x1024_75_0"       : 1280 x 1024 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_60_0"       : 1280 x 1024 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x1024_60"         : 1280 x 1024 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x960"             : 1280 x  960 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x960_85"          : 1280 x  960 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x960_60"          : 1280 x  960 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x800"             : 1280 x  800 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x800_85"          : 1280 x  800 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x800_75"          : 1280 x  800 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x800_70"          : 1280 x  800 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x800d60"          : 1280 x  800 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "1280x800_60"          : 1280 x  800 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768"             : 1280 x  768 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768_85"          : 1280 x  768 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768_75"          : 1280 x  768 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768_70"          : 1280 x  768 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768_60"          : 1280 x  768 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720"             : 1280 x  720 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720_85"          : 1280 x  720 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720_75"          : 1280 x  720 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720_70"          : 1280 x  720 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720_60"          : 1280 x  720 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864"             : 1152 x  864 @  85.1 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_85.00"       : 1152 x  864 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_75.00"       : 1152 x  864 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_60.00"       : 1152 x  864 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_85_0"        : 1152 x  864 @  85.1 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_85"          : 1152 x  864 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_85_1"        : 1152 x  864 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_75_0"        : 1152 x  864 @  75.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1152x864_75"          : 1152 x  864 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_75_1"        : 1152 x  864 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_70"          : 1152 x  864 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_60"          : 1152 x  864 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_60_0"        : 1152 x  864 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1024x768_85.00"       : 1024 x  768 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768"             : 1024 x  768 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1024x768_75.00"       : 1024 x  768 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768_60.00"       : 1024 x  768 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768_85"          : 1024 x  768 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768_85_0"        : 1024 x  768 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1024x768_75_1"        : 1024 x  768 @  75.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1024x768_75"          : 1024 x  768 @  75.0 Hz  (from: EDID)
    (II) NVIDIA(0): "1024x768_75_0"        : 1024 x  768 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768_70"          : 1024 x  768 @  70.1 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1024x768d60"          : 1024 x  768 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "1024x768_60"          : 1024 x  768 @  60.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1024x768_60_0"        : 1024 x  768 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "960x720"              :  960 x  720 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x720d60"           :  960 x  720 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600"              :  960 x  600 @  75.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600d75"           :  960 x  600 @  75.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600d73"           :  960 x  600 @  72.8 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600d70"           :  960 x  600 @  70.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600d60"           :  960 x  600 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "928x696"              :  928 x  696 @  60.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "928x696d60"           :  928 x  696 @  60.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "896x672"              :  896 x  672 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "896x672d75"           :  896 x  672 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "896x672d60"           :  896 x  672 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "848x480"              :  848 x  480 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "848x480_85"           :  848 x  480 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "848x480_75"           :  848 x  480 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "848x480_70"           :  848 x  480 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "840x525"              :  840 x  525 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "840x525d85"           :  840 x  525 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "840x525d75"           :  840 x  525 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "840x525d70"           :  840 x  525 @  70.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "840x525d60"           :  840 x  525 @  60.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "832x624"              :  832 x  624 @  74.5 Hz  (from: X Server)
    (II) NVIDIA(0): "832x624_75"           :  832 x  624 @  74.5 Hz  (from: X Server)
    (II) NVIDIA(0): "800x600"              :  800 x  600 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "800x600_85.00"        :  800 x  600 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600_75.00"        :  800 x  600 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600_60.00"        :  800 x  600 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600_85_0"         :  800 x  600 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "800x600_85"           :  800 x  600 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600d85"           :  800 x  600 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600_75_0"         :  800 x  600 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600_75"           :  800 x  600 @  75.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "800x600d75"           :  800 x  600 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600_72"           :  800 x  600 @  72.2 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "800x600d70"           :  800 x  600 @  70.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600d65"           :  800 x  600 @  65.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600_60"           :  800 x  600 @  60.3 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "800x600_60_0"         :  800 x  600 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600d60"           :  800 x  600 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600_56"           :  800 x  600 @  56.2 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "800x512"              :  800 x  512 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x512d60"           :  800 x  512 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "720x400"              :  720 x  400 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "720x400_85"           :  720 x  400 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "700x525"              :  700 x  525 @  85.3 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d85"           :  700 x  525 @  85.3 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d85_0"         :  700 x  525 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d75"           :  700 x  525 @  74.8 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d70_0"         :  700 x  525 @  70.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d70"           :  700 x  525 @  70.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d60"           :  700 x  525 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x512"              :  640 x  512 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x512d85"           :  640 x  512 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x512d75"           :  640 x  512 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x512d60"           :  640 x  512 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x480"              :  640 x  480 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x480_85.00"        :  640 x  480 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "640x480_75.00"        :  640 x  480 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "640x480d85"           :  640 x  480 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x480_85_0"         :  640 x  480 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x480_85"           :  640 x  480 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "640x480_75"           :  640 x  480 @  75.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "640x480_75_0"         :  640 x  480 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "640x480_73"           :  640 x  480 @  72.8 Hz  (from: EDID)
    (II) NVIDIA(0): "640x480_73_0"         :  640 x  480 @  72.8 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x480d60"           :  640 x  480 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x480_60_0"         :  640 x  480 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x480_60"           :  640 x  480 @  60.0 Hz  (from: EDID)
    (II) NVIDIA(0): "640x400"              :  640 x  400 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x400_85"           :  640 x  400 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x400d85"           :  640 x  400 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x400d75"           :  640 x  400 @  75.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x400d70"           :  640 x  400 @  70.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x400d60"           :  640 x  400 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384"              :  640 x  384 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384d85"           :  640 x  384 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384d75"           :  640 x  384 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384d70"           :  640 x  384 @  70.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384d60"           :  640 x  384 @  60.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360"              :  640 x  360 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360d85"           :  640 x  360 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360d75"           :  640 x  360 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360d70"           :  640 x  360 @  70.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360d60"           :  640 x  360 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x350"              :  640 x  350 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x350_85"           :  640 x  350 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "576x432"              :  576 x  432 @  85.2 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "576x432d85"           :  576 x  432 @  85.2 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "576x432d85_0"         :  576 x  432 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "576x432d75"           :  576 x  432 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "576x432d75_0"         :  576 x  432 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0

    It turns out it won't do any lower than 640x480. These are my changes:
    Modeline "800x600_85.00" 56.55 800 840 928 1056 600 601 604 630 -HSync +Vsync DoubleScan
    Modeline "800x600_75.00" 48.91 800 840 920 1040 600 601 604 627 -HSync +Vsync DoubleScan
    Modeline "800x600_60.00" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync DoubleScan
    Modeline "640x480_85.00" 35.71 640 672 736 832 480 481 484 505 -HSync +Vsync DoubleScan
    Modeline "640x480_75.00" 30.72 640 664 728 816 480 481 484 502 -HSync +Vsync DoubleScan
    Modeline "640x480_60.00" 23.86 640 656 720 800 480 481 484 497 -HSync +Vsync DoubleScan
    Modeline "320x240_60.00" 5.26 320 304 336 352 240 241 244 249 -HSync +Vsync DoubleScan
    Modeline "320x200_60.00" 4.19 320 304 328 336 200 201 204 208 -HSync +Vsync DoubleScan
    and
    Modes "1280x1024_85" "1280x1024_75" "1280x1024_60" "1152x864_85" "1152x864_75" "1152x864_60" "1024x768_85" "1024x768_75" "1024x768_60" "800x600_75" "800x600_60" "640x480_75" "640x480_60" "320x240_60" "320x200_60"
    I'm not sure if i did that doublescan thingy right, but it gets completely ignored.

  • Difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013

    Hi, We are building company site with Sharepoint 2013 Enterprise Edition and were wondering what is the difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013? What are the roles/purposes of each one? What
    happens if only Reporting Services Sharepoint Mode  installed or vise versa.
    Thank you in advance

    Reporting Services in SharePoint mode is a service for displaying, managing, and creating SSRS reports within SharePoint. The addin is a pre-req for SharePoint that is used to display reports and is required for Reporting Services in Native or SharePoint
    mode, but does not by itself do anything.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Problem with Target Display Mode

    Hi there
    I just bought a nice new 2013 27-inch iMac and want to use my old late 2009 27-inch iMac as a second display. The new iMac has 2 Thunderbolt ports and the older one has a MiniDisplay port (the connectors are the same). I bought a Thunderbolt cable to connect the two, as I read that the new iMac can connect to older Macs through the MiniDisplay port. When I hit FN-CMD-F2 or just CMD-F2 nothing happens, and I cannot get the older iMac to serve as a second display. I have shut down and restarted, unplugged all other peripherals, and checked the cables are inserted the right way, etc, etc.
    Interestingly, when I use the brand-new Thunderbolt cable to connect my two MacBook Airs (both of which have Thunderbolt ports), I can't get Target Display mode (FN-CMD-F2/CMD-F2) to work either.
    So, do I need a male-to-male Mini Display to Mini-Display cable instead, or some other sort of connectors to allow the older iMac to work as a second display?
    Thanks
    Jon

    OK, I will try that. Still not sure why Target Display Mode doesn't work with the two laptops though. Target _Disk_ mode works fine with them, when they are connected both ports show as 'connected' under About This Mac/More Info/System Report, but (FN)F2_CMD does nothing...
    Jon

  • Making  selected rows to display mode in ALV  grid

    I Have program with ALV grid display, which has check box as the first field.
    The requirement is like.
    When i select some rows in the grid display with the check box and click on a button , then the selected
    rows shud change to display mode and others rows shud be in edit mode as before.
    *& Report  ZSRI_CHCKBOX_ITAB_UPDATE
    REPORT  ZSRI_CHCKBOX_ITAB_UPDATE.
    TYPE-POOLS: SLIS.
    DATA: BEGIN OF ITAB OCCURS 0,
            CHK    TYPE C,
            VBELN  TYPE VBAP-VBELN,
            POSNR  TYPE VBAP-POSNR,
            MATNR  TYPE VBAP-MATNR,
            MATWA  TYPE VBAP-MATWA,
            MATKL  TYPE VBAP-MATKL,
          END OF ITAB.
    DATA: T_FCAT TYPE SLIS_T_FIELDCAT_ALV,
          W_FCAT TYPE SLIS_FIELDCAT_ALV,
          RT TYPE SLIS_SELFIELD,
          W_LAYOUT TYPE SLIS_LAYOUT_ALV  .
    PARAMETERS: S_VBELN TYPE VBAK-VBELN.
    DATA: WA LIKE LINE OF ITAB.
    DATA: G_GRID_REFERENCE TYPE REF TO CL_GUI_ALV_GRID.
    DATA: BEGIN OF ITAB1 OCCURS 0,
            CHK    TYPE C,
            VBELN  TYPE VBAP-VBELN,
            POSNR  TYPE VBAP-POSNR,
            MATNR  TYPE VBAP-MATNR,
            MATWA  TYPE VBAP-MATWA,
            MATKL  TYPE VBAP-MATKL,
          END OF ITAB1.
    DATA: T_FCAT1 TYPE SLIS_T_FIELDCAT_ALV.
    DATA: W_FCAT1 TYPE SLIS_FIELDCAT_ALV.
    START-OF-SELECTION.
      SELECT VBELN POSNR MATNR MATWA MATKL FROM VBAP
        INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE   VBELN EQ S_VBELN.
      W_FCAT-COL_POS = 1.
      W_FCAT-FIELDNAME = 'CHK'.
      W_FCAT-TABNAME = 'ITAB'.
      W_FCAT-CHECKBOX = 'X'.
      W_FCAT-EDIT = 'X'.
      W_FCAT-SELTEXT_L  = 'CHECK'.
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS = 2.
      W_FCAT-FIELDNAME = 'VBELN'.
      W_FCAT-TABNAME = 'ITAB'.
      W_FCAT-SELTEXT_L  = 'SALES'.
      W_FCAT-EDIT = 'X'.
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS = 3.
      W_FCAT-FIELDNAME = 'POSNR'.
      W_FCAT-TABNAME = 'ITAB'.
      W_FCAT-SELTEXT_L  = 'ITEM'.
      W_FCAT-EDIT = 'X'.
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS = 4.
      W_FCAT-FIELDNAME = 'MATNR'.
      W_FCAT-TABNAME = 'ITAB'.
      W_FCAT-SELTEXT_L  = 'MATERIAL'.
      W_FCAT-EDIT = 'X'.
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS = 5.
      W_FCAT-FIELDNAME = 'MATWA'.
      W_FCAT-TABNAME = 'ITAB'.
      W_FCAT-SELTEXT_L  = 'MATERIAL QTY'.
      W_FCAT-OUTPUTLEN = 20.
      W_FCAT-EDIT = 'X'.
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS = 6.
      W_FCAT-FIELDNAME = 'MATKL'.
      W_FCAT-TABNAME = 'ITAB'.
      W_FCAT-SELTEXT_L  = 'MATERIAL GROUP'.
      W_FCAT-OUTPUTLEN = 20.
      W_FCAT-EDIT = 'X'.
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         I_CALLBACK_PROGRAM                = SY-REPID
         I_CALLBACK_PF_STATUS_SET          = 'STATUS1'
         I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
         IS_LAYOUT                         = W_LAYOUT
         IT_FIELDCAT                       = T_FCAT[]
        TABLES
          T_OUTTAB                          = ITAB[].
    *&      Form  STATUS1
    FORM STATUS1 USING P_EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'STATUS1' EXCLUDING P_EXTAB.
    ENDFORM.                    "PF_STATUS_SET
    *&      Form  USER_COMMAND
    FORM USER_COMMAND USING R_UCOMM TYPE SY-UCOMM
                            R_SELFIELD TYPE SLIS_SELFIELD.
      CASE R_UCOMM.
        WHEN 'READ'.
    R_SELFIELD-REFRESH = 'X'.
          CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
            IMPORTING
              E_GRID = G_GRID_REFERENCE.
          CALL METHOD G_GRID_REFERENCE->CHECK_CHANGED_DATA.
          LOOP AT ITAB INTO WA WHERE CHK = 'X'.
            APPEND WA TO ITAB1.
          ENDLOOP.
          W_FCAT1-COL_POS = 1.
          W_FCAT1-FIELDNAME = 'CHK'.
          W_FCAT1-TABNAME = 'ITAB'.
          W_FCAT1-CHECKBOX = 'X'.
          W_FCAT1-SELTEXT_L  = 'CHECK'.
          APPEND W_FCAT1 TO T_FCAT1.
          CLEAR W_FCAT1.
          W_FCAT1-COL_POS = 2.
          W_FCAT1-FIELDNAME = 'VBELN'.
          W_FCAT1-TABNAME = 'ITAB'.
          W_FCAT1-SELTEXT_L  = 'SALES'.
          APPEND W_FCAT1 TO T_FCAT1.
          CLEAR W_FCAT1.
          W_FCAT1-COL_POS = 3.
          W_FCAT1-FIELDNAME = 'POSNR'.
          W_FCAT1-TABNAME = 'ITAB'.
          W_FCAT1-SELTEXT_L  = 'ITEM'.
          APPEND W_FCAT1 TO T_FCAT1.
          CLEAR W_FCAT1.
          W_FCAT1-COL_POS = 4.
          W_FCAT1-FIELDNAME = 'MATNR'.
          W_FCAT1-TABNAME = 'ITAB'.
          W_FCAT1-SELTEXT_L  = 'MATERIAL'.
          W_FCAT-OUTPUTLEN = 20.
          APPEND W_FCAT1 TO T_FCAT1.
          CLEAR W_FCAT1.
          W_FCAT1-COL_POS = 5.
          W_FCAT1-FIELDNAME = 'MATWA'.
          W_FCAT1-TABNAME = 'ITAB'.
          W_FCAT1-SELTEXT_L  = 'MATERIAL TYPE'.
          W_FCAT-OUTPUTLEN = 20.
          APPEND W_FCAT1 TO T_FCAT1.
          CLEAR W_FCAT1.
          W_FCAT1-COL_POS = 6.
          W_FCAT1-FIELDNAME = 'MATKL'.
          W_FCAT1-TABNAME = 'ITAB'.
          W_FCAT1-SELTEXT_L  = 'MATERIAL GROUP'.
          W_FCAT-OUTPUTLEN = 20.
          APPEND W_FCAT1 TO T_FCAT1.
          CLEAR W_FCAT1.
          CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
              I_CALLBACK_PROGRAM = SY-REPID
              IT_FIELDCAT        = T_FCAT1[]
              IS_LAYOUT          = W_LAYOUT
            TABLES
              T_OUTTAB           = ITAB[].
    CLEAR ITAB1.
    CLEAR ITAB1[].
    CLEAR T_FCAT1.
    CLEAR T_FCAT1[].
      ENDCASE.
    ENDFORM.                    "USER_COMMAND
    Edited by: dharmaji Srinivasu on Feb 6, 2009 1:22 PM

    Hi
    Check out the following links:
    http://www.sapdev.co.uk/reporting/alv/alvgrid_rowsel.htm  " To obtain selected rows
    http://www.sapdev.co.uk/reporting/alv/alvgrid_editable.htm  "To make cells editable
    In the case stmt for particular button you can do:
    loop at itab into wa.
          if wa-sel EQ 'X'.
          Process records that have been selected
          endif.
    endloop.
    Hope this helps
    Regards,
    Jayanthi.K

  • How to develop a report for display unused materials

    how to develop a report for display unused materials? where can i find them?

    Hi Phani,
    I didnt get what u acually mean by unsued material. These are some sample materail types which u can find in table 'Mara'  field 'Mtart'.
    ABF  Waste                   
    AEM  Samples                 
    BLG  BLG Empties  External   
    BLGA BLGAEmpties  Fixed assets
    CH00 CH Contract Handling    
    COMP Prod. alloc., purchased 
    CONT KANBAN Container        
    COUP Coupons                 
    DIEN Service                 
    DOCU documentary batch       
    ERSA Spare parts             
    FERT Finished product(fert)  
    FGTR Drinks                  
    FHMI Prod. resources/tools   
    FOOD Foods (excl. perishables)
    FRIP Perishables             
    GR01 material type 01        
    GR02 material type 02        
    HALB Semi-finished product   
    HAWA Trading goods           
    HERS Manufacturer parts      
    HIBE Operating supplies      
    IBAU Maintenance assembly    
    INTR Intra material          
    KMAT Configurable material   
    LEER Empties                 
    LEIH Returnable packaging    
    LGUT Empties (retail)        
    MODE Apparel (seasonal)      
    NLAG Non-stock material      
    NOF1 Nonfoods                
    PIPE Pipeline material       
    PLAN Trading goods (planned) 
    etc.
    ex:
    select * from mara where mtart = 'ABF'.
    Regards,
    Kiran B

  • Generation of report in landscape mode using PDF template

    Hi,
    I am creating a report using pdf template, I have used the repeating group i.e I have used the code <?rep_field="BODY_START"?> and <?rep_field="BODY_END"?> as the repeating area and with the field which needs to be repeated i have used the code <?rep_field="T1_G1"?> in order to display data in the loop.
    But finally when the report is displayed, the report acts strange ...sometimes it fails to open says that an internal file read error occured , whereas if I remove the <?rep_field="T1_G1"?> code it works fine , other times if at all it displays the report, the values in the repeating field operlap each other and they are vertically oriented wheras for landscape mode it should be vertical, I tried setting the properties and locking the fileds but all in vain.
    Kindly help ASAP!!
    Thankz
    -Gaurav

    I have had the same problem for a year. I never got my TAR answered so I tried again. I am waiting...again. Portrait works fine for me. I am using it to generate po's with custom headers. The only part that does not work for me is the total appears on every page, not just the last one. If I get an answer, I will let you know...

  • Opening a selection screen in display mode

    I have an ALV grid created in OOPS. Each line of this ALV has name of a report and its variant name. Here I have created a button on toolbar. When a user selects a line and clicks this button, selection screen of the selected report is to be opened in display mode with selection screen filled as per its variant. Both the report name and varaint name will be same as the selected line. I am able to open the selection with varaint filled, but it comes in editable mode. How do I make it non-editable mode?

    Hi,
    For making your selection screen non editable you will have to disable them for input.
    For this you will have to modify the screen structure.
    try this:
    loop at screen
    if screen-fieldname = 'XYZ'.
    screen-input = '0'.
    endif.
    modify screen.
    endloop.
    You can write this code at selection screen of the program which calls this selection screen.
    Call this code under a condition, so that it get triggeres only when you call this screen form the ALV.

  • Conditions Tab to be in display mode

    Dear Friends,
    There is a unique requirement I have come across where the Conditions Tab in the Sales Order and the Billing Document should be in display mode only and that too only for 2 scenarios. The reason I cannot go to the Condition Type and make the necessary settings is that, the same Condition Types are commonly used in the Pricing Procedure of other scenarios. So, if I make the changes in one condition Type, it will affect the other Pricing Procedure.
    I cannot copy the Condition Types in Pricing Procedure and replace the existing ones because the BI reports will be afftected.
    Kindly suggest a solution where even in create mode of the Sales Order or Billing Document, the Conditions Tab is in display mode.
    Regards
    Vineet Jain

    Hi Anil,
    Please refer to OSS notes:
    105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
    USEREXIT_FIELD_MODIFICATION
    USEREXIT_PRICING_CHECK
    USEREXIT_FIELD_MODIFIC_LEER
    USEREXIT_FIELD_MODIFIC_KZWI
    USEREXIT_FIELD_MODIFIC_KOPF
    1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
    Regards,
    Marcin

  • Selection screen in display mode

    Hi all,
    I have a selection screen with 2 radio buttons & 2 text boxes. If I click the first radio button, the 2nd text box shud be in display mode & if I click the 2nd radio button, the 1st text box shud be in display mode.
    How to do it?
    Thanks in advance.
    SELECTION-SCREEN BEGIN OF BLOCK MODE WITH FRAME TITLE title.
    parameters : s_pr radiobutton group g1,
                 s_po radiobutton group g1.
    select-options : s_prnum for eban-banfn.
    select-options : s_ponum for eban-ebeln.
    SELECTION-SCREEN END OF BLOCK MODE.
    Pls look into the code above.
    G.Vijay

    Hi vijaykumar,
    1. simple.
    2. your code only,
       just copy paste.
    3. It will work as u require.
    4.
    report abc.
    TABLES : EBAN.
    SELECTION-SCREEN BEGIN OF BLOCK MODE WITH FRAME TITLE title.
    parameters : s_pr radiobutton group g1 <b>USER-COMMAND RAD DEFAULT 'X'</b>,
    s_po radiobutton group g1.
    select-options : s_prnum for eban-banfn <b>MODIF ID M1</b>.
    select-options : s_ponum for eban-ebeln <b>MODIF ID M2</b>.
    SELECTION-SCREEN END OF BLOCK MODE.
    <b>at selection-screen output.</b>
      LOOP AT SCREEN.
        IF S_PR = 'X' AND SCREEN-GROUP1 = 'M2'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
          IF S_PO = 'X' AND SCREEN-GROUP1 = 'M1'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    regards,
    amit m.

Maybe you are looking for

  • Help needed to tune the Query:Statistics added

    Can someone DBA please help me to tune this query: SELECT DISTINCT K.ATTRIBUTE_VALUE AGENCY_ID,B.PROFILE_NM ,NVL(G.OFFICE_DESC,'--') OFFICE_DESC,f.OFFICE_ID,B.PROFILE_ID,'%' ROLE,'%' LAYOUT, CASE WHEN 'flagB' = '%' THEN NVL(J.ISS_GRP_DESC,'BILLING')

  • Macbook Pro trackpad and keyboard freezes after attempting sleep mode

    I bought this computer on April 2008. It has the latest OS X 10.5.6 and it did not accept the trackpad firmware. I tried to install and the software said "this computer does not need this update". This has been happening a lot when I am using Skype w

  • How to send a text file over a LAN?

    Hi: I am working on a program (web app using a servlet), that produces a text file with Key / Value pairs ex) NAME joe CITY los angeles I want to send the text file over an intranet (LAN) to another pc and store it in the C:\temp directory of the rec

  • Concerned about possibility of recovery personal data from my old iPhone

    I'm concerned about possibility of recovery personal data after applied "Erase All Content and Settings" option on an iPhone or iPad. Does Apple guarantee that no one can recover my personal data after I deleted & reset my old iPhone by the "Erase Al

  • Insert statement with loop function

    Hello all, I'm new with the loop function What need to do is to use a select statement with a condition This output needs to be inserted in a table The values of the condition are stored also in a table It will be something like this: BEGIN   FOR i I