Report display will be 2010,2011 year wise display and 2012 Month display

Hi,
I want to Create Report, output will be 2010,2011 year wise display, 2012,2013 month wise display and Fiscal year quarter display, all are display based on input value of Fiscal year data, please anyone guide me, How to do?
Thanks,
Nandish

Hi,
      How to assign KF to Time Characteristics,My report dsplay will be like this, For example
      Input Fiscal YEAR=2010 to 2013
                    Material              2010   2011 APR.2012 to MARCH 2013
Quantity              A1              200      300        *                    *
Quantity              A2              300      400        *                    *
Also Display quarter wise display. How to do
Thanks,
Nandish

Similar Messages

How to display values year wise in a request

Hi All,
My requirement is I have 3 years of data. I need to display that data year-wise in different tables at a time i.e., suppose if i have 2010,2011,2012 data then i need to display 2010 data in one table ,2011 data in next table and 2012 data in another table in same request. At a time i should get all three years of data but in different tables.
Here table in the sense data should be separated year_wise.
How can I achieve this?
Thanks in Advance,
Regards,
Sindhu

Hi,
It is good know you got your requirement.
Pivot table is on of the specialized view we are using to create the report. The options available in the view is same like Microsoft Excel Pivot table view.
Pivot table optioins:
Page: It is like prompt in the view itselft. If we are adding column in the page it will show all the values of that column for e.g if you are adding year column into that page tab it will show the values of the year, so we can select any particular year and can filter the report in the view itself.
Section: It will separate the report into different section by the column value which we are having in section tab.
Measures: It is the special place for adding number columns (e.g amount, employee count, quantity,revenue and etc, like that ) basically called measures in the fact table. The column dragged into the measures have special aggregation rules such as sum, min, max, avg,count and etc
excluded: if want to add any column in the saved request but donot want to display, you can drag that column into excluded tab.
Rows: These option will display the report by value of the column wise.
Columns: It will separate the measure value by the column what we are having in this tab. (for e.g if we are putting year in column tab the column 'Revenue' in the measure table will be separated by year wise.
Please mark the answer if it helpful.

POC day wise caluation and report

Dear
Is any report that will be showing the day wise Plan POC and Actual POC progress.I am using the TIME PROP measurement method. please also correct me if measurement method is wrong.
thanks

Hi Nagarajan Sir,
The above link query is showing a particular date stock status
but my requirement is different below sample format
Date     -    Item Code - Item Description - UoM - Warehouse - Item Group - Closing Stock
15/03/14   F00012       TMT BAR 10 MM     KG        KRY01          FINISHED      230.35
16/03/14   F00012       TMT BAR 10 MM     KG        KRY01          FINISHED      265.65
17/03/14   F00012       TMT BAR 10 MM     KG        KRY01          FINISHED      356.35
Can i get this format
Selection criteria
From date
To Date
Warehouse
Please think about this format and suggest
Regards
Mukesh Singh

To generate a report that will have services(exchange, AD, file services etc) status and interruptions in a day(SCOM 2012)

We have SCOM 2012 with Lync, exchange, fileserver and AD managment packs installed. The requirement is to generate a report that will have health status of these services and its failures in one sheet. Is it possible to generate such a report in SCOM?
if so, how to do it? please assist.

Yes, you can create custom report for availability of these services.
http://blogs.technet.com/b/emreguclu/archive/2011/10/13/using-linked-reports-in-scom-to-create-custom-availability-reports-for-specified-monitors.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

"From" presence not displaying in Outlook 2010

I've been working on a software product aiming presence and im integration with Microsoft Outlook using IMessenger API.
Integration works as expected with Outlook 2013. However, the presence indicator of the
"from" or sender does not display in Outlook 2010. The to, cc and bcc fields all display presence properly. In Outlook 2013 however, all of the from, to, cc and bcc fields display presence.
There is a similar discussion for Outlook 2013 on:
http://social.technet.microsoft.com/Forums/office/en-US/a2500fec-fc3f-4295-bbe3-7620876a2d24/from-presence-not-displaying-in-outlook-2013
My problem is similar to this one except that I've the same problem with Outlook 2010 and I don't have this problem with Outlook 2013. It may be resolved in Outlook 2013 with a hotfix I don't know. Does anybody have the same issue and have a fix or workaround
for this situation? I have latest updates for Office 2010 already.
A strange thing is that when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 1, presence indicators are disappear from contact names as expected, however when I hover over the sender it
displays sender's presence correctly on tooltip. So integration seems ok when I look at this.
when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 2, presence indicators are disappear from both contact names and tool tips as expected.
when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 0, presence indicators are appear for contacts in to, cc, and bcc fields except "from" field, which is quite strange. After
I move around between messages, some of the sender's presence indicators starts displaying.
Does anybody know why the presence indicator is not displaying consistently for the "sender" contact in Outlook 2010 when TurnOffPresenceIcon has value 0? Does anybody have the same issue and have a fix or workaround for this situation?

Hi,
There is another registry value named TurnOffPresenceIntegration
which also have an effect on the presence indicator, please find the
Key in: HKEY_CURRENT_USER\software\microsoft\Office\14.0\Common\IM
or Policy Key: HKEY_CURRENT_USER\software\Policies\microsoft\Office\14.0\Common\IM
and then check if the key value is set to 0.
For more information, please refer:
http://support.microsoft.com/kb/2726007
Regards,
Steve Fan
TechNet Community Support

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate... disconnect display, open lid laptop display will not activate... used to work fine.

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button. Worked fine before Lion update. Any Advice?

Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine.
Had heard something about this happening w/ Lion but went ahead anyway.
Oh well...
Hoping your pointer helps... will let you know how it turns out. Thanks very much for responding!!!

Year wise total

Hi i am getting data for month wise..
month wise diffrent data is coming ...
i want to sum year wise total based on month wise total..
how can i do this...

As a sample code...i given here..
give your code too..
data: yr(4) type c,
sum(10) type p decimals 2.
sum = 0.
sort itab by mdate.
loop at itab into wa.
sum = sum + amount.
at end of mdate+0(4).
write:/ sum.
sum = 0.
end at.
endloop.
Message was edited by:
Ramu

Can Crystal Server 2011 run on a Windows 2012, R2 server?

Hey,
I purchased Crystal Server 2011 in April 2013. Unfortunately, due to a heavy workload I'm just now ready to install it in a test environment. Will Crystal Server 2011 run on a Windows 2012, R2 server?

If you update your CR Server to SP 5, then yest, it is supported on WIN 2012.
See the PAM.
To get SP5 you will have to loin to the SAP Market Service Place.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada

Add dynamic parameters for Year, From Week and To Week.

hi all,
my requirement is Add dynamic parameters for Year, From Week and To Week.
can any one help how to do this one plz....
in Answers..
advanced Thanks..

hi kansal,
These requirement for the BI Publisher reports,
1)Add dynamic parameter for year, From week and To week.
2) Year to default to Current Year.
that's what i have dude..
may be we need to assign the dynamic variables for year ..
Edited by: 932326 on Sep 4, 2012 7:16 AM

I bought my first iMac 27" i5 in November 2011 last year. Do you think there would be a update that will Features a Retina Display, Siri etc ?? So my iMac will be the same as the new one that will be released this year, Or will I have to buy a new iMac t

I bought my first iMac 27" i5 in November 2011 last year.
Do you think there would be a update that will Features a Retina Display, Siri etc ??
So my iMac will be the same as the new one that will be released this year,
Or will I have to buy a new iMac to get all these new updates ??
It would be a shame if I did because my iMac is only 6months old if that ..
Kind regards Simon Trott Apple user and proud of it

We're not allowed to speculate on future or rumoured Apple products, but we all know there'll always be newer tech coming along.
The iMac you have is an excellent machine, be happy with it and get a good few years use out of it. By the time your machine is slowing down, whatever comes next will have been updated numerous times.
I had the 2011 i5 27" delivered about 3 weeks ago. It's a cracking machine

I want to display year wise sales value

Dear expert's,
i am loaded sales overview infocube 0sd_c03 with 11 series infosource in to infocube expect for calyear..... time chara.......
so i am only having monthwise values in infocube. now i want to display year wise sales value in my query based on month wise time chara....values.......
how to do it..... with out loading once again in to infocube.......
Regards
Harikrishna N

Bex 3.x displays report in Excel as you know.
In the Bex query designer ,include a dummy formula or calc kf or any such thing
In the excel sheet, you have option of writing a VB code that can refer you calmonth and populate relevant calyear in that dummy column created by you.
This will avoid any kind of upload in cube as the data population goes in runtime. For huge data sets , check on performance

Fiscal Year wise GR Value display

Dear SDN,
I need to generate the report Fiscal year wise GR Value.
Example:
Selection Parameters:
Material number:
Fiscal Year(Apr to March):
Output ... like this.
Fiscal Year GR Value in cr
2006          100
2007          200
2008          300
2009          400
In the cube time chars are Calender Year,Calender Year/Month,Calender Year/Quarter,Fiscal Year/Period but Fiscal Year is not
availabe......
waiting for reply
Thanks & Regards,
Praveen.K

Hi,
We can do it using 2LIS_02_ITM and 2LIS_02_SCL with 0PUR_C01 InfoCubes. So check it, I have done using the same combinations.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Else you also check 0IC_C03 with 2LIS_03_ * DataSources.
Thanks
Reddy

SQL Query base Finish goods year wise report

Hi
I want to make query base year wise report of Finish Goods.
example like :
Item Name     Year2010-11                           Year2011-12
   abc         Sep   Oct   Nov                 Sep    Oct   Nov
    xyz        5     0      10                   2    5      0
Why this report is need to me because i want to see How old Finish Goods are in the Stock. so that when a delivery make, the person can delivery from old stock first.
Our FY is from September to August
Please help me
Regards,
Mizan
Edited by: mizan700 on Nov 15, 2011 3:28 PM

Hi Eva,
As Sybrand mentioned, you can't create DDL inside a procedure, and you probably don't need a temporary table. Temporary tables in SQL server used to be used to create a read consistent view for the duration of the procedure, but Oracle's multi version concurrent consistency model eliminates this as a need in all but the most remote cases.
Your create table only seems to be used to take arguments from the user, which I don't see in your code.
If I am looking at your code correctly, all you really want to ask the database is the following:
select nvl(sum(dc.daily_count),0)
from daily_counts_summary dc, branch br, division div
where dc.branch_ky = br.branch_ky
    and br.division_ky = div.division_ky
    and dc.transaction_dt = t.trndt
    and dc.commission_cd = 'R'
    and div.division_ky = nvl(v_div_ky,div.division_ky)
    and dc.member_type_cd, 'P'
    and dc.expiration_dt between v_exp_start_dt and v_exp_end_dt;You can do this in Crystal Reports by writing a procedure that has an out parameter of type sys_refcursor. All you have to do is:
create or replace procedure my_proc(p_curs in out sys_refcursor,v_exp_start_dt date,v_exp_end_dt date) is
begin
open p_cur for
select nvl(sum(dc.daily_count),0)
from daily_counts_summary dc, branch br, division div
where dc.branch_ky = br.branch_ky
    and br.division_ky = div.division_ky
    and dc.transaction_dt = t.trndt
    and dc.commission_cd = 'R'
    and div.division_ky = nvl(v_div_ky,div.division_ky)
    and dc.member_type_cd, 'P'
    and dc.expiration_dt between v_exp_start_dt and v_exp_end_dt;
end;
/...or something close to that, with perhaps calls to your date functions to extract what you need.
You also have several syntax errors in your code. I would recommend you get two books if your are going to work with Oracle:
Anything by Tom Kyte
Anything by Steven Feuerstein
These would both be available on amazon.com
HTH,
Steve

Reports with variables on fiscal year and want to display the current fiscal period values

Hi
i wan to display the fiscal periods in one of the reports when i give input for fiscal year, let say i will pass the fiscal year as 2012 , then i need to display the revenue for 2012.01,2012.02,2012.03,....2012.12 and in another selection i need to restrict the revenue with the previous year.
how can we achieve that.

Hi,
Refer this thread:Same thing has been discussed.
http://scn.sap.com/thread/3365593
Regards,
AL

Can i get month, quarterly, half yearly, yearly wise sales report basing on

hi,
sap gurus,
good evening to all,
how can i get month, quarterly, half yearly, yearly wise sales report basing on division and material.
is there any std transaction code for that.
customization is requried for that.
regards,
balaji.t
09990019711

Standard SAP SD Reports:=
Statistic Group:
Purpose u2013 To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Regards,
Rajesh banka

Report display will be 2010,2011 year wise display and 2012 Month display

Similar Messages

Maybe you are looking for