Report distribution/bursting error

Hi All,
Ive created a distribution.xml file and a report file test.rdf both of which were placed in the approp directory.
The content of the xml file is as follows:
<destinations>

<foreach>
<file id="MyFiles" name="report_&<p_fleet_id>.pdf" format="pdf" instance="this">
<include src="report"/>
</file>
</foreach>

<foreach>
<mail id="ex2"

to="[email protected]"
from="[email protected]"
subject="This mail contains the files for &<p_fleet_id>">
<body srcType="text">
This is the body of the message.
</body>
<attach format="pdf" name="report_&<p_fleet_id>.pdf" srcType="report" instance="this">
<include src="mainSection"/>
</attach>
</mail>
</foreach>
</destinations>
=======================
When I run the report from the browser using
http://atdevaw07:7778/reports/rwservlet/?rs_rpt_key_pirps&REPORT=test.rdf&DISTRIBUTE=YES&DESTINATION=distribution.xml
I get the follwing error message:
REP-34304: Expected name instead of <.
REP-0110: Unable to open file 'E:\Customsoft\Intranet\Temp\distribution004254332.xml'.
REP-34304: Distribution failed to complete, please review the distribution lists
Please help!
Thanks

Instead of ...
subject="This mail contains the files for &<p_fleet_id>">
try using ...
subject="This mail contains the files for &am p; &l t; p_fleet_id &g t;."> (escape characters for ampersand & less-than, greater-than symbols).

Similar Messages

Report Distribution through Email (secure)

Hi,
I have tried emailing reports using SMTP and would kile to know if it is possible to do a secure email using Oracle Reports9iAS in-built 'report distribution via email' feature.
If yes, how can this be done?
Thanks,
Bharat

Bharat,
I now get what you are exactly looking far ( I wasn't sure earlier)
If you are looking for enxryting the mail content before sending, then you should go for a pluggbale mail destination. Tou could also explore oracleWireless destination wihc could be sued for mail destination. I beleive oracleWireless webservice mail destination supports encryption of mail body
I was undarstanding that, you are probbaly don't want to have the receipients ids not exposed in the reports URL. This can be achived by reports bursting/distribution nand you can repeat on a goup which has a db column having mail ids
Thanks
The Oracle Reports Tea

AP CLOSING 시 ORPHANS DISTRIBUTION LINE으로 인해 ERROR 가 발생

제품 : FIN_AP
작성날짜 : 2003-05-13
AP CLOSING 시 ORPHANS DISTRIBUTION LINE으로 인해 ERROR 가 발생
======================================================
PURPOSE
AP CLOSING ISSUE를 해결한다.
Problem Description
Ap closing 시 계속해서 Unaccounted Transaction Error 가 발생하나 'Unaccounted Transactions Report’에는 해당 데이타가 아무것도 없는것으로 나온다.
Workaround
Solution Description
1. Closing.sql 을 수행하여 보면 Unposted Invoice Distributions 에 해당하는 데이타가 존재한다.
2. 위의 unposted invoice distributions 의 invoice id로 ap_invoices_all table을 조회하면 해당하는 invoice가 한건도 존재하지 않는다.
3. ap_invoice_distributions_all table에서 위의 invoice id를 가진 건을 delete 해주고 다시 closing 프로세스를 수행한다.
Reference Documents
Note 165726.1

Report Generation Toolkit Error

I have an application that generates multiple excel spreadsheets each containing a table and four graphs. This has been working fine for three months but I am now getting error when generating the reports. The source of the error is in the Excel_create_workbook as indicated on the attached picture. I am passing in a template name for my excel reports. The error code (-2147352571) states a type mismatch. The file path to my template is a constant so I can't see how sometimes I get a type mismatch and other times I don't.
Any help on this would be greatly appreciated.
Thank you,
AJL
Attachments:
create_Workbook error.JPG ‏269 KB

Thanks for the reply, however, this VI is part of the Report Generation Toolkit so I don't want to have to modified NI's code if possible. I did try your suggestion without saving the VI and I still got the same error.
Any other ideas?
BTW - I encountered this problem first in an executable but have since seen the error in the development code.
Does anyone know if there is a limit to how many times you can create an excel document from LabVIEW? I wouldn't think so but the error seems to happen if I try to create several (more then five usually) documents at a time.
Thanks in advance
AJL

Stock variance report Crashes with error code REP-56048

SR : 6990718.992
gtcr : http://qmon.oraclecorp.com/qmon3/quickpicks.pl?t=t&q=6990718.992
Problem Statement : When the user is trying to generate report for Stock variance report from Oracle Retail Merchandising System the report crashes with error code REP-56048.
The steps to reproduce are specific to Oracle Retail Merchandising system application and hence I have not mentioned here.
The REP-56048 error seems to be generic. Could you please advise me on this issue.
Thanks & Regards,
Sameer

You can review the following Oracle Metalink Document;
Comprehensive REP-56048 Troubleshooting and Overview Guide: Doc ID: Note:285281.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:88153902823984055::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,285281.1,1,1,1,helvetica
Hope it would be useful.
Adith

Report failing with error

Hi All,
Application R12.1.3 with Shared Application Tier 2 nodes
Database : 11g R 11.2.0.2 with RAC 2 nodes with ASM
We have a concurrent program which gets fired when submitted thru API . For each order program is run once . If there are more orders it will run n number of times . At this time one request is failing with error
REP-0004:
REP-0069:
REP-57054:
But for the same failed request when we run separately(with same parameters) it is completing Normal . There is no other error in Manager Logs.
please help what can be the issue.
thanks
Mapps

Please see the following docs/links.
Concurrent Processing - Concurrent Reports Failing With Errors REP-0004,REP-0082 and REP-0104 [ID 844976.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-0004+AND+REP-0069+AND+REP-57054&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
If the links did not help, please enable trace/debug and see if you get more details about the error and post the contents of the log file then -- How Can Trace and Debug Be Turned On For A Concurrent Request? [ID 759389.1]
Thanks,
Hussein

Report server name error

aoa!
plz help me, i got following error when i run report through forms on application server 9i, forms run successfully, but report not. the error is
"FRM-41213: Unable to connect to the Reports server misdb"
thanks in advance.

Assuming misdb Reports server is up and running, see Metalink Note:291955.1 - Diagnosis Test Form For Easy Debugging of FRM-41213 Error

Report miss match error

hi guys,
Can anyone tell me what is the easiest way to find out Report miss match error of bi with r3 report especially in fi.
thanks in advance,
regards,
Bunty.

lots of ways we can do that.Check your reconciliation reports at your organistaion , then you will get an idea how they compare each time otherwise in general everybody copies data in excel and want to compare.

Report Viewer Configuration Error

Hi,
I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
when attempting to open a report in the Microsoft Visual Studio Report Viewer:
Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
Internet Information Services 7 or later.
Has anyone seen this error before, or have any advice on finding a solution?
Thank you.

Hi HealthServices3300,
You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
issue, please post this issue to
this forum. If it's a report viewer control issue, you can post this issue in
this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Report data binding error

I have created a banded report split into departments. Each
recore has a value associated with it. The report runs fine if I
dont try to sub-total each departments vale, but if I add a
calculated field to the banding, I get the following error:
Report data binding error Error evaluating expression :
textField_2 Source text : calc.Department_Total.
Variable calc.Department_Total is undefined.
The calculated field is simply the sum of the values, with an
initial value of 0 and set to reset when the group changes on the
department. I am using the same data type for the calc field as it
automatically gave for the original Value field (Big Decimal)
Any ideas?
Dave H

Does anyone have any ideas about this, Its getting a bit
critical now. Has anyone else been able to do sums that calculate
on group changes?? The sum total works for the report, jusyt not
the bands. I desparate here, pulling my hair out.
Regards
Dave H

CR 2008 Report Printing,hit error "Server Error in '/CRReport' Application"

Hi
We encountered Error Message when trying to print Crystal Report 2008 via Windows Internet Explorer.
"Server Error in '/CRReports' Application."
Failed to Open Report
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error & where it originated in the code.
Exception Details:
"System.Runtime.interopService.COMException: Failed to open report."
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I really appreciate your feedback.
Jenny Heng

Make sure you're using the latest SP:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Consider adding latest FP also:
https://smpdl.sap-ag.de/~sapidp/012002523100001024152010E/cr2008_fp24.zip
Make sure you are disposing of the report object once you are done with it and before you re-run it with new parameters (.close, .dispose).
Test without the combo box. Let the report prompt. Can you reproduce the behavior now? If not, try to supply the parameter values via a text box. Can you reproduce the issue now? E.g.; is it the combo box that is the issue, or the report?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

The report terminated with error: REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME   09.14.4.41
SERVER_PORT   8888
SCRIPT_NAME   /rwservlet
SERVER_PROTOCOL   HTTP/1.1
SERVER_SOFTWARE   undefined
GATEWAY_INTERFACE   undefined
SERVER_PORT_SECURE   undefined
ACCEPT   image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD   GET
REMOTE_HOST   test-wam-app
REMOTE_ADDR   09.14.4.41
REMOTE_USER   undefined
AUTH_TYPE   undefined
PATH_INFO   showenv
QUERY_STRING   server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED   undefined
CONTENT_LENGTH   undefined
CONTENT_TYPE   undefined
AUTHORIZATION   undefined
USER-AGENT   Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT   undefined
REFERER   undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile   /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server   rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC   yes
ERRORTEMPLATE   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS   yes
COOKIEEXPIRE   30
ENCRYPTIONKEY   reports9i
DIAGHEADTAGS   undefined
DIAGBODYTAGS   undefined
HELPURL   undefined
RELOAD_KEYMAP   undefined
IMAGEURL   http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON   no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME   /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN   /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG   AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW   /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH   /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP   /tmp
REPORTS_TAGLIB_URI   /WEB-INF/lib/reports_tld.jar
java.class.path   /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
Djay

Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

Calling Report from Form Error ORA-06508

Dear all,
I want migrate from Fom6i to Oracle Developer Suite 10g (10.1).
Folder Form = C:\APLIORA\IRS\FORM
Folder Report = C:\APLIORA\IRS\REPORT
I have modified file DEFAULT.ENV
FORMS_PATH=C:\APLIORA\IRS\FORM;C:\APLIORA\IRS\REPORT
i do not have problem call a form from form.
but when i call report from form show error ORA-06508 : PL/SQL : could not find program unit being called ; -6508
my procedure is
PROCEDURE Call_Report IS
     list_id ParamList;
BEGIN
list_id := Get_Parameter_List('input_params');
IF NOT Id_Null(list_id) THEN
Destroy_Parameter_List(list_id);
END IF;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id,'MAXIMIZE',TEXT_PARAMETER,'YES');
Add_Parameter(list_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');
RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS,'TESTREPORT.REP',SYNCHRONOUS,RUNTIME,FILESYSTEM,list_id,null);
END ;
Do I miss something ?
Can any one help ?
Thanks

Hi,
Thank you for your replay.
The problem have solved.
This my step :
1. Install Windows XP SP2 and Form 10.1.2.0.2 on new pc.
2. Install Jinit version 1.3.1.28.
3. Create report server
3. Compile form, report and pll
4. call report from from with this procedure :
PROCEDURE Call_Report (vFILENAME varchar2) IS
report_id                Report_Object;
ReportServerJob VARCHAR2(100);
vc_rep_status      VARCHAR2(100);
repsvr                          varchar2(21) := 'myserv';
userid                         VARCHAR2(100);
pass                          VARCHAR2(100);
Host                    VARCHAR2(100);
BEGIN
userid          := Get_Application_Property(USERNAME) ;
pass          := Get_Application_Property(PASSWORD) ;
Host          := Get_Application_Property(CONNECT_STRING) ;
report_id:= find_report_object('REPORT');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,vFILENAME||'.jsp');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,repsvr);
ReportServerJob:=run_report_object(report_id);
vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
WHILE vc_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED', null)
LOOP
vc_rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
END LOOP;
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet?report='||vFILENAME||'.jsp'||'&userid='||userid||'/'||pass||'@'||Host||'&destype=CACHE&desformat=PDF&paramform=yes','_blank');
ELSE
message ('Report failed with error message '|| vc_rep_status);
END IF;
END;
Ok, but i have another strange error. I will post new thread.
Thank you and regards
Teguh S

Crystal report 9 memory error.

we are using crystal report 9 with sybase power builder..... at some client locations we are experiencing the application crash due to memory while opening crystal reports.
the following errors were noticed
1.the instruction at "0x77124804" referenced memory at "0x001b3e60". the memory could not be read.
2.the instruction at "0x7c911daf" referenced memory at "0x00000000". the memory could not be read.
please guide us what is the issue.. do we need any hotfix or service pack for this.
regards

I assume you already tried to reinstall the application and I would recommend to do it one more time, but this time follow the process for so-called manual uninstall
1. Uninstall Crystal reports 9 using add remove programs
2. Save backup -up of the Registry
3. Remove the following registry key (be careful with the registry file):
HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports
4. Reinstall Crystal Reports 9
As the next step I would check and disable Data Execution Prevention.
Go to: Start> Right-click My Computer" select Properties> Advanced tab > click Performance settings> Data Execution Prevention tab.
If DEP turned on for all programs, then add Crystal Reports (crw32.exe) to except list.
If DEP is not cause of problems, then I would suggest Process Monitor to locate the reason or at least try to locate it.
You can download Process Monitor utility from the following page:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
The same page will tell you how to use it. I would suggest the following steps:
Close all unnecessary applications/processes
1. Open Crystal Reports
2. Start the Process Monitor, stop capturing events (Cntrl-E), clean the display (Cntrl-X), add the following filter (Cntrl-L) "Process Name is crw32.exe then include", click ok.
3. Start capturing events (Cntrl-E)
4. Immediately click Format menu on Crystal Reports
5. Stop capturing events and save the log file
Now you can look at the log file to see what is going wrong. I would also advice to capture the same log on client machine to compare the sequence of events.
Gracias...!!

Report distribution/bursting error

Similar Messages

Maybe you are looking for