Report Does Not Display Data from Non-BCS Cube

Hi,
I have the following scenario.
I have a MultiProvider with two real-time cubes. Cube A is used to store Actual data and Cube B is used to store Budget data.
Cube A is used by BCS, so the real-time load behavior is set to "Real-Time Data Target Can Be Planned; Data Loading Not Alllowed".
Cube B is not used by BCS, so data is being loaded using BW InfoPackages, with real-time behavior set to "Re-Time Data Target Can Be Loaded With Data; Planning Not Allowed"
My BCS has two Consolidation Group hierarchy. One is for Legal reporting and another one is for Business Segment reporting. So, if I have a Consolidation Unit, COMPANY1, it would belong both hierarchies, e.g. LEGAL1 and BSEG1.
In my query, I have no problem displaying Actual data when I specified Reporting Mode (0BCS_REPMOD) = Standard. (S). However, Budget data does not get displayed. FYI, I have uploaded data twice for each record i.e. LEGAL1 and BSEG1 in the Cons Group (0SEM_CGCOMP) characteristic.
Any idea on how can I get the budget data displayed?
Thanks.

Hi,
Have you Identified Characteristics and Selected Key Figures:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cf/bc734190ba137de10000000a155106/frameset.htm
Without proper construction of multiprovider you'll not be able to see both cubes.

Similar Messages

Report does not display data

I have a crystal XI report that when run will not display data; if the report should be six pages that is the number of pages that will be generated. The problem is that the pages show up as blank. If the blank pages are exported the exported file will contain data, if the report is sent to a printer the report will contain data, but no data is ever displayed on the screen. This report has been loaded on 15 other computer and runs perfectly. Any help would be greatly appreciated. By the way if this user logs in remotely and runs this report it will display data.

A few ideas;
1) Make sure you are working with [SP 6|https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe].
You are on SP 2...
[SP6 msm|https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip]
2) Try different resolutions
3) Try to see if there is an updated video driver
4) Make sure there is a default printer driver installed.
5) Run [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] see if there are any differences in dlls loading on a box that works and the one that does not (CR and non CR dlls).
Ludek
Edited by: Ludek Uher on Feb 22, 2010 10:32 AM

PLD Report does not show data from Query

Hello,
SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
Thanks,
Nick

Hi Nicholas,
Please check below links.
query based print layout design
Print Layout Designer \Custom Reports
How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
Hope this help
Regards::::
Atul Chakraborty

Report does not display data in Oracle Applications

I created a custom report and registered the same under Oracle Order Entry. The report uses 1 parameter and whereas everything is registered in Oracle apps. correctly, the report draws a blank upon completion. The only visible thing is the header part.
This report though works fine if run directly from Reports Designer.
Anybody know what specific setting (if required) needs to be made in Oracle Applications? Further in order that you can know the picture, whatever is enclosed in the Repeating Frame does not show up in App. but as pointed earlier works just fine from Reports Designer.
Any help would be greatly appreciated.

I am using a browser (FireFox v2) based InfoView so I guess it is the DHTML viewer.
On the server it is java (Tomcat). The report uses a custom driver (crdb_ado).
Currently all the servers (RAS, page, cache etc) are running under LocalSystem account. I don't understand what a domain account is, is it administrator?
The interesting part is, I was able to upload and run 8 other reports before I experienced this problem. Have I hit some limit?
I appreciate your help. Please share any other ideas/insights on this issue.
Regards

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

Report does not display some data

Hi,
Using:
- Crystal Reports 2008 SP3 as development platform.
- Visual Studio 2008 to launch the crystal report.
- SQL Server 2005 SP3 as database
Crystal Report:
- rpt file has been set up for a couple of months, working fine uptill last friday
- dataset comes from a SQL Server stored procedure with some parameters. Executing this stored procedure with these parameters, returns the correct result set
- showing the report using the Crystal Reports Viewer, some fields remain blank since the beginning of this week. Why does the report does not show all the data that is in the result set of the stored procedure ?
Any idea for a solution ?
Any idea to debug such strange behaviour ?
Thanks a lot for any help.

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

UIX page not displaying data from VO's

I have an application where my users log in by passing a username/password to a client method in my application module. The Webusers View Object has a view link to the Customers view object, which has a view link to the Orders view object, which has a view link to the OrdLines view object, like this:
WebusersView
--CustomersView via WebCustViewLink
----OrdersView via CustOrdViewLink
------OrdLinesView via OrdOrdlinesViewLink
I've run this Application Module through the tester and I can see data via all the View Links.
I have the following code in my login() script:
w = getWebusersView();
w.setWhereClause("login = '" + username + "'");
w.executeQuery();
I've stepped through the login() code and it works correctly. If I understand BC4J correctly, then all of the View Links should fire and coordinate the data from Customers, Orders, and OrdLines when this query executes successfully.
I created a UIX page and did a drag/drop of Orders to the page as a read-only table. I found the Orders table by expanding the Webusers entry in the Data Control palette, then the Customers entry below that, to grab the Orders entry there. I think this means that it will follow the WebCustViewLink to get the Customer that goes with the Webuser, then the CustOrdViewLink to get the Orders for that Customer. Is this correct?
When I try to run this and display the table, I get no records. I know for a fact that records exist under the Webuser username I've chosen.
What is wrong? Why doesn't my UIX page display the appropriate Orders based on the Webusers->Customers->Orders view links?

If there, try removing the $. at the beginning of the binding that gets puts there if you select the item from the pop up list.
I have a text field that is read only and bound without the $. that was working fine for displaying data. I have a drop down that had the $. and was not saving. I removed the $. and now it is getting saved to the XML. However, it does not display on the next render of the form.

Master page fields not displaying data from XML file

Hi,
For some reason if I a add a field on the master page, when previewed it does not display the xml data assigned to the field.
I have a work around, but it looks messy and would prefer to resolve the problem correctly.
My work around is to create another field with the same name in the "Design view" layout, and change the presence to invisible. I don't even have to link it to the xml data, simply select Global as the default binding.
Any ideas what I have done wrong, I assume it's a simple setting somewhere but I have no idea what it is.
Thanks
Russell

If there, try removing the $. at the beginning of the binding that gets puts there if you select the item from the pop up list.
I have a text field that is read only and bound without the $. that was working fine for displaying data. I have a drop down that had the $. and was not saving. I removed the $. and now it is getting saved to the XML. However, it does not display on the next render of the form.

Report is not getting data from Remote cube thru Multi Provider

Hi SAPians
I ve strucked up with a Problem in The Reconciliation Report in BW3.5
The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
Both cubes have same Data Source and all the Objects were in Active version and found good.
When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
What might be the problem
Please help me in this regard
Thanks in advance
Regards
Arjun

Hi
In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
Check with basis to solve the connectivity issue.
Ensure Remote cube is consistent
Bye

ISA invoice detail does not display data R/3 E-commerce 5.0

I´m using R/3 Internet Sales B2B.
I´m in area for search transactions and I have selected invoices, credit memos or down payments. When I click one of these documents, the system does not display any data in the detail screen.
Any idea?

Full Message Text
An exception has occurred: java.lang.NullPointerException
at com.sap.isa.isacore.action.GenericSearchBaseAction.addRequestedFields(GenericSearchBaseAction.java:525)
at com.sap.isa.isacore.action.GenericSearchBaseAction.buildSelectOptions(GenericSearchBaseAction.java:140)
at com.sap.isa.isacore.action.GenericSearchISAAction.ecomPerform(GenericSearchISAAction.java:65)
at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
[EXCEPTION]
java.lang.NullPointerException
at com.sap.isa.isacore.action.GenericSearchBaseAction.addRequestedFields(GenericSearchBaseAction.java:525)
at com.sap.isa.isacore.action.GenericSearchBaseAction.buildSelectOptions(GenericSearchBaseAction.java:140)
at com.sap.isa.isacore.action.GenericSearchISAAction.ecomPerform(GenericSearchISAAction.java:65)
at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

BI Publisher Report does not display decimal numbers

Hi,
I have created a one page BI Publisher Report. I generally take the .xdm and .xdoz files and send it to the client which they upload on their server. The report has been coming up fine until recently there was a glitch on the Client Server. Now the report does not show a a section which has decimal numbers. I can see it perfectly on my machine. I am extremely frustrated to search for a solution and client is not very helpful in providing the information what went wrong or what was the fix on their server. Any help is greatly appreciated.
Thanks,
DRL

user8824622
If i am understanding your issue right i guess i have faced the same one while ago.
The solution for this one is, if you are on the latest patch or update, i am on July update
Go to
Administration--> manage Bi Publisher under Bi Publisher --> under run time configuration --> properties --> the last option on the list which is Use 11.1.1.5 compatibility mode true --> apply
now it should be working
Please let me know if it worked out and mark as correct if it have solved the issue
Thank You

Crystal Reports 13 VS2010 Report does not display new data

The project is written in VS2010 connecting to an Access 2007 DB. It is running on a local network. All reports work fine from the standpoint that data is displayed on the reports HOWEVER, if a data table is updated the newley entered records do not show up on the report yet when I examine the database the records have been added to the table.
I hit refresh and the new records still do not appear. I've closed out the session and re-started the software and the records do not appear. It's almost as if the DB is 'frozen'. Suggestions?

Hey Ludek,
Problem with that sample is it hits the MDB directly and not the ODBC DSN. The Jet engine is being deprecated by MS so the solution is to use ODBC or OLE DB to any version of Access.
I've posted this multiple times but here it is again:
Try using the replace connection method to update the location of the DSN:
private void ReplaceConnection_Click(object sender, EventArgs e)
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
ISCDReportClientDocument rcd;
rcd = rptClientDoc;
rptClientDoc.DatabaseController.LogonEx("dwcb12003", "xtreme", "sb", "pw");
//Create the logon propertybag for the connection we wish to use
CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag logonDetails = new CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag();
logonDetails.Add("Auto Translate", -1);
logonDetails.Add("Connect Timeout", 15);
logonDetails.Add("Data Source", "dwcb12003");
logonDetails.Add("General Timeout", 0);
logonDetails.Add("Initial Catalog", "Orders");
logonDetails.Add("Integrated Security", "True");
logonDetails.Add("Locale Identifier", 1033);
logonDetails.Add("OLE DB Services", -5);
logonDetails.Add("Provider", "SQLOLEDB");
logonDetails.Add("Use Encryption for Data", 0);
logonDetails.Add("Owner", "dbo"); // schema
//Create the QE (query engine) propertybag with the provider details and logon property bag.
CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag QE_Details = new CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag();
QE_Details.Add("Database DLL", "crdb_ado.dll");
QE_Details.Add("QE_DatabaseName", "Orders");
QE_Details.Add("QE_DatabaseType", "OLE DB (ADO)");
QE_Details.Add("QE_LogonProperties", logonDetails);
QE_Details.Add("QE_ServerDescription", "dwcb12003");
QE_Details.Add("QE_SQLDB", "True");
QE_Details.Add("SSO Enabled", "False");
QE_Details.Add("Owner", "dbo");
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo newConnInfo = new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo oldConnInfo;
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfos oldConnInfos;
oldConnInfos = rcd.DatabaseController.GetConnectionInfos(null);
for (int I = 0; I < oldConnInfos.Count; I++)
oldConnInfo = oldConnInfos;
newConnInfo.Attributes = QE_Details;
newConnInfo.Kind = CrystalDecisions.ReportAppServer.DataDefModel.CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
rcd.DatabaseController.ReplaceConnection(oldConnInfo, newConnInfo, null, CrystalDecisions.ReportAppServer.DataDefModel.CrDBOptionsEnum.crDBOptionDoNotVerifyDB);
See if that works for you. You'll have to change the info to ODBC from OLE DB. You can get the info from an app also, Ludek has a link to it, it will generate code to use RAS to set log on info...
Don

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write(" <center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Report does not show data , but data exists in the cube.

Hi All,
I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
It shows the data if I load directly from the extractor, but not when I load data thru DSO.
Any ideas.
Alex(Arthur Samson)

Hi Alex,
I am facing same problem, i have data in cube but in report i cant see....
i have created a generic DS, i loaded the data to DSO then CUBE.
data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
i think you solve this issue... plz help me to resolve this issue.
Regards,
SHAIK.

Bex report does not display key figures

Friends,
Need help urgently.
We have a report of a multicube(MC1). key figures of one of the infocube(IC1) in the multicube(MC1) does not showup on the report.
If reported independly on that IC1 it does show all values. This sounds really weird but its taking up all my time.
Please friends, need your inputs on what else could have gone wrong.
FYI...earlier we had same problem but creating new report on this multicube resolved problem. But this time, we have a new KF added to the infocube(IC1). But no change to the reports are made. Even though problem occurs. I even transported all the rules, multicube and infocube.
Please help me identify what could be the cause for it.
-Raj

Gupta,
Thanks, this resolved my problem.
But here;s another issue that came up now.
I have a keyfigure (conversion factoor to EA) as attribute to master data infoobject (zmatnr). I have this included in the multicube. On the query, I have created a replacement path variable for conv. factor and this works well with all reports except this sales report which has key figures included from multicube(from multiple infocubes in muticube. Any idea what is that i am doing wrong?
thanks

Report Does Not Display Data from Non-BCS Cube

Similar Messages

Maybe you are looking for