Report does not recognize formatting on inputable member in EPM Formatting-Sheet

Dear Gurus,
When using an EPM Formating Sheet in the EPM-AddIn for Excel the formatting for "Inputable Members" is not applied to the Report. The formatting for Local Members, Blank Members, Hierarchies etc. is recognized however. I applied the formatting sheet to the report and enabled the "use as input schedule" checkbox in the sheet options. The checkbox for Member/Property Formatting and "inputable Member default Format" is enabled as well.
The EPM-AddIn documentation does not state any specifics when using the "inputable Member" formatting.
I know that i could simply copy the formatting sheet and use "base level Formatting" but i would like to create a single formatting sheet for reports and input schedules in our company as a template.
We use SAP BPC 10.0 and EPM Add-In SP19 (Build 8909) on .Net Framework 3.5
Do you have any suggestions how to fix this issue?
Kind Regards
Eric

HI Eric,
The EPM-AddIn documentation does not state any specifics when using the "inputable Member" formatting.
It is used normally when you want specific formatting for your base level member. In BPC you can input date (Save) data only on  the base level member not on parent level members data get aggregates on the parent level member. So "inputable Member"  formatting will apply only on the base level members.
The formatting for Local Members, Blank Members, Hierarchies etc. is recognized however.
If   you are using hierarchies level formatting and inputable Member there are might chances of conflicting formatting,
Better to use either of them and also check check which formatting you are using Row or Column.

Similar Messages

  • My shuffle 2nd generation does not recognize some podcast in m4a format.

    My shuffle does not recognize podcast form The Economist in m4a format. Nevertheless, it plays those fom T.E. in mp3 format, as well as many others podcast in m4a format w/o any problem.

    If there is something not quite right about the iPod shuffle, click on the Restore button. This will restore the iPod to its original settings. If that does not work or is inaccessible, try the iPod Reset Utility.
    http://support.apple.com/kb/HT1238
    Both procedures will erase the iPod.

  • EPM SP18 does not recognize input data

    Hi,
    we migrated from EPM SP12 to SP18 and face the following problem. When I open a report full of input sheets in order to save data I received from a company without any access to BPC, EPM does not recognize the input data. The data is still there in the input cells, but not recognized as new data.
    When I refresh the same report my input cells are empty and now I can type in the values manually and save it. EPM does recognize the data.
    Is this only SP18 behaviour?
    Thanks in advance for any helpful advice!
    Sandra

    HI Andy,
    yes this is right. The sheet is offline. But as soon as you log on it is automatically set to online mode again. The input data is still there then, just not recognized as data to be saved...
    Thanks
    Sandra

  • Report Generation Toolkit does not recognize Office 2003

    Hi there
    The newly installed MS Office 2003 and LV 8.5.
    When installing Report Generation Toolkit is screams that it does not recognize Office 2003:
    "Microsoft Office version 2000 or higher was not detected on the system. You need to install Microsoft Office 2000 or higher before you install the NI Report Generation Toolkit for Microsoft Office 1.1.2."
    What to do?
    thanks
    Pawel

    Did you reboot your system after installing Office 2003?  Have you launched Word and/or Excel since installing Office 2003?  I think there might be some registry initialization that takes place on first launch of Word and Excel.  If you've launched Word/Excel and the RGT 1.1.2 installer still isn't detecting them, there may have been a problem with your Office 2003 install.  Try uninstalling Office 2003 and reinstalling it.  When you reinstall, double-check that Word and Excel are selected in the install.  Then launch them both a first time before trying to install RGT 1.1.2.  If it still doesn't detect Office 2003, perhaps there's another problem with your system.  Are you using any foreign language software?  What OS are you running?  Is it Office 2003 standard or professional?  Is there anything weird about your Office install, like is it installed over the network instead of from CDs? 
    I'm hoping the answer to one of these questions helps you solve the problem.  Keep me posted...
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

    Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
    every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

    Hi Jim,
    yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
    I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
    Many thanks for your help.
    Andrej.

  • Help...people picker control does not recognize outlook formated bulk users

    Hello,
    Currently out of the box people picker control provides a textbox, User validity icon and a find user book. If there are bulk of users from outlook and paste it, the SharePoint control does not recognize user and cant find bulk
    users in the find book directory all at once(need to find user details one at a time) , so I was told to hide the user directory icon and link. Will you please suggest me to on how to hide directory icon? is there a way using JavaScript or Jquery to hide?
    Otherwise if there is a way to directly transfer bulk of users from outlook into SharePoint people control works great.
    multiple users allowed in sharepoint people picker control however it does not support outlook format in SharePoint people picker.. such as
    'abc, xyz <a href="mailto:[email protected]>' ;  efg, pqr <">[email protected]>' ;  efg, pqr <[email protected]>
    Can anyone suggest me to hide the finder link & image? also to add bulk of users directly from outlook?
    Thanks

    Nobody has anwered. I have solution and done myself to hide and manage controls on SharePoint list. Key thing here is to map the jquery library correctly and specific version.
    Hope this helps at least others and can overcome difficulties I have undergone
    Here is the Javascript:
    <script type="text/javascript" src=".../jquery-1.3.2.min.js"></script>
    <script type="text/javascript">
    $(document).ready(function(){$('a').each(function(){if($(this).attr('title') == "Check Names")$(this).hide();});});
    </script>

  • Thunar does not recognize image file formats

    Hi Archers,
    My problem is that I use XFCE4 with Thunar file manager and Thunar does not recognize image file formats. I mean for example JPG format is an executable application fromat according to my Thunar, but I'd like Thunar to recognize JPG format as image or bitmap format appearing with small preview of the image.
    Any help is appritiated!
    gellb

    Yes, I did.
    Activating Show Thumbnails button in Preferences of Thunar does not work.

  • IPhoto does not recognize Tiff format

    I am trying to import my photos in TIFF ext however I get a response from iPhoto that it does not recognize the format.
    What I am doing wrong?
    thank You!

    Did this test in the begging, and it doies not give me the option to create a new library.... : /
    Then you're not holding the correct key or not holding it long enough while launching.
    But I could import all to Aperture and then from iPhoto import the pictures......however when in the iPhoto library they have been "converted" to JPEG file and lost all quality...the same picture in Aperture (TIFF) has 36MB   while in the iPhoto after I imported 684KB!!
    You need to understand how to use Aperture. You're getting the Aperture Previews, not the original files.
    Regards
    TD

  • IPhoto does not  recognize formate of photos after lost os x 10.9 update

    I have a macbook pro after last update iphoto does not recognize the formate of a lot of my pictures. 

    What version of iPhoto and system are you running?  What do you mean by :does not recognize the formate of a lot of my pictures."? Are these photos already imported into the library?  What do you see when you open iPhoto?
    OT

  • I have reinstalled Acrobat Pro 9 following a hard drive re format. It opens just fine but does not recognize my serial number. My computer is running Windows 7 64 bit

    I have reinstalled Acrobat Pro 9 following a hard drive re format. It opens just fine but does not recognize my serial number. My computer is running Windows 7 64 bit

    Hi 12msonti,
    Please try the following:
    Delete the Adobe PCD folder and caps.db file:
    Windows:  \Program Files\Common Files\Adobe\Adobe PCD
                        \Program Files\Common Files\Adobe\caps\caps.db
    Launch Acrobat and enter the serial number and check.
    Regards,
    Rave

  • Time Machine does not recognize my iMac backup. Reports: not enough space; can't back up. How do I get it to recognize the backup?

    Time Machine does not recognize my 430 GB iMac backup on 1 terabyte Time Capsule. Reports: not enough space; can’t back up. How do I get it to recognize the old backup and continue backups?

    Thanks for the Time Machine Troubleshooting link. Apparently things have changed since 10.7.0. Backups.backupdb doesn’t exist. Path now is: Time Capsule/Data/Daru’s iMac.sparsebundle. So I did Terminal (I usually avoid Terminal) using the instruction in B6. It does not appear to be working. It went through looking for backup, preparing backup, and is now stopping backup, and the TMBackup has disappeared from the sidebar.
    Well, just now Time Machine progressed to preparing backup again; the Tiime Machine Backups appeared in sidebar, and with it Backups.backupdb/Daru’s iMac/2012-04-21-112939.inProgress. So it does exist... I’ll let it run, see what happens... But that is a strange date. Today is 28.
    I’ll let you know the outcome.
    Oops. Just ended! Real time report: “Backup too large for disk...“ So it is not recognizing the old backup. I’ll look at those instructions again, see if I can do the Terminal thing with the backup running. I doubt I can damage anything except the existing baackup which I'll lose anywy if I can’t achieve recognition.
    Daru

  • Lightroom does not recognize the raw format of files loading from my Nikon AW1 and loads them as jpegs. I know there are updates that would allow this camera to be recognized as shooting raw but I haven't been able to work it out. Any help out there?

    Lightroom does not recognize the raw files (necs?) coming in from my Nikon AW1. It loads them as jpegs. I know it is possible to update Lightroom so it knows my Nikon but I can't get it to work.
    I would like files to be loaded as .dng.

    update by downloading the files directly and then applying them for lr 4 and earlier,  http://www.adobe.com/downloads/updates/
    for lr 5.7.1, the last lr 5 update, use the below link:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  6| 5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • MacBook pro does not recognize my WD external hard drive anymore

    I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
    The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

    Does the WD drive show in Disk Utility?
    Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
    1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
    WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

  • IMovie 6.0.3 does not recognize built in iSight Camera on new iMac

    New iMac, Intel, OS 10.5.4, QT 7.5.
    Built in Camera works with Photo Booth, the new iMovie 7.1.3 and iChat.
    iMovie HD 6.0.3 or 6.0.4 does not recognize the camera. Opening a new project results in a No Camera Connected error. I have tried selecting various options in the video format drop down when creating a new project. I have repaired permissions, tried it under various users, removed the imovie plist, reinstalled imovie (both 6.0.3 and 6.0.4) without success. All 10 of the new computers are exhibiting this problem.
    Any help would be appreciated.

    That is not an option that I can select on the imac's. On my iBook under 10.5.4 with iMovie HD 6.0.3 or 6.0.4 I can click on the triangle next to the camera icon and select the built in iSight camera. On the new iMacs that does not work. The built in iSight is not listed as an option.

Maybe you are looking for